LC with Column-Switching and Spectrophotometric Detection for Determination of Risperidone and 9-Hydroxyrisperidone in Human Serum

An automated high performance liquid chromatography with column-switching and ultraviolet detection was developed for the analysis of risperidone and 9-hydroxyrisperidone. The method needs minimum sample preparation and is useful for the detection down to a limit of 1 ng mL⁻¹. Sample clean-up of serum was carried out on a CN 20 μm SPE-column using 8% (v/v) acetonitrile in water. Chromatographic separation was performed on ODS Hypersil C18 material with 38% (v/v) acetonitrile and 0.4% (v/v) TEMED in water. Application of the method to the analysis of serum samples confirmed its suitability for therapeutic drug monitoring of risperidone and 9-hydroxyrisperidone.     

On-line preconcentration and determination of cobalt by DPTH-gel chelating microcolumn and flow injection inductively coupled plasma atomic emission spectrometry

This paper reports the development of a new methodology for the determination of cobalt in biological samples by using a flow injection system with loaded DPTH-gel as solid phase to preconcentrate analytes. The procedure is based on the on-line preconcentration of cobalt on a microcolumn of 1,5-bis(di-2-pyridyl)methylene thiocarbohydrazide immobilized on silica gel (DPTH-gel). The trapped cobalt is then eluted with 1% tartaric acid and 1% citric acid (7.1 mL) and determined by inductively coupled plasma atomic emission spectrometry (ICP-AES). The analytical figures of merit for the determination of cobalt are as follows: detection limit (3S), 8.5 ng mL^–1; precision (RSD), 5.8% for 100 ng mL^–1 of cobalt; enrichment factor, 13 (using 7.3 mL of sample); sampling frequency, 40 h^–1 using a 60-s preconcentration time. For a 120-s preconcentration time (14.6 mL of sample volume) a detection limit of 5.7 ng mL^–1, an RSD under 5% at 50 ng mL^–1, an enrichment factor of 25, and a sampling frequency of 24 h^–1 were reported. The precision and accuracy of the method were checked by analysis of biological certified reference materials.     

A sensitive and specific HPLC-MS method for the determination of sophoridine,sophocarpine and matrine in rabbit plasma

A sensitive and specific method was developed for the determination of sophoridine (SRI), sophocarpine (SC) and matrine (MT) in rabbit plasma by HPLC-MS. After an administration of Kuhuang by injection, blood samples were collected and extracted with methanol. The extract solutions were analysed by HPLC-MS method. The separation was performed on a ZORBAX Extend-C18 column using methanol/water/diethylamine (50:50:0.07, v/v/v) as mobile phase. The quinolizidine alkaloids were detected by using mass spectrometry in the SIM mode. There was a good linear relationship between peak area and concentration of analytes over the concentration range of 13.2–995.0 ng mL^–1 for SRI, 7.0–530.0 ng mL^–1 for SC and 8.8–655.0 ng mL^–1 for MT, respectively. The absolute recovery of this method was more than 57% for SRI, 87% for SC and 91% for MT. The accuracy of assay was more than 90%. The limits of detection (LODs) were 6.8 ng mL^–1 for SRI, 3.5 ng mL^–1 for SC and 4.2 ng mL^–1 for MT, respectively. The limits of quantitation (LOQs) were 13.2 ng mL^–1 for SRI, 7.0 ng mL^–1 for SC and 8.8 ng mL^–1 for MT, respectively. The intra-day and inter-day coefficients of variation (RSDs) were less than 10.1, 6.3 and 5.8% for SRI, SC and MT, respectively. The developed method was applied to determine the concentration–time profiles of SRI, SC and MT in rabbit plasma after injection of Kuhuang.     

Specific polyclonal-based immunoassays for sulfathiazole

A highly sensitive and specific enzyme-linked immunosorbent assay has been developed for detection of sulfathiazole (STZ, 4-amino-N-thiazol-2-yl-benzenesulfonamide). A set of haptens was synthesized in order to produce polyclonal antibodies against sulfonamides. Two ELISA formats (antibody-coated and conjugate-coated) were also investigated using all the serum/coating conjugate combinations that showed specific recognition. The developed ELISA succeeded in detection of STZ at concentrations as low as 0.03 ng mL^–1 over a measurable range of 0.12–6.71 ng mL^–1. Selectivity studies have demonstrated that other sulfonamides do not interfere significantly (<10%) with analysis of STZ by this immunochemical technique. Analysis of spiked bee honey samples by the developed ELISA method showed recoveries were good. The selectivity and sensitivity (IC₅₀=1.6 ng mL^–1) make it a suitable screening method for determination of low levels of STZ in food samples.     

TIRF-based biosensor for sensitive detection of progesterone in milk based on ultra-sensitive progesterone detection in water

We report on recent advances of our immunoassay for the hormone progesterone in cows milk. Detection is based on total internal reflectance fluorescence (TIRF), the binding-inhibition assay with an immobilized progesterone derivative, and a commercially available monoclonal antibody to progesterone as biological recognition element. The fully automated River Analyzer (RIANA) biosensor for unattended, cost-effective, and continuous monitoring of environmental pollution therefore was adapted for sensitive determination of progesterone in milk. First, the sensitivity and robustness of the existing progesterone assay for water analysis were improved, resulting in a detection limit (LOD) of only 0.2 pg mL^–1 and a quantification limit (LOQ) of only 2.0 pg mL^–1. These extraordinary results are the lowest detection and quantification limits for progesterone determination using biosensors yet reported in the literature. Second, the accurate indicator of ovulation was calibrated and detected in three different types of milk (UHT milk, fresh milk, and raw milk). For commercial milk and randomly procured raw milk nominal levels of progesterone are typically in the range 5–15 ng mL^–1. Limits of detection (LOD) achieved for added progesterone (i.e. spiked samples) were between 45.5 and 56.1 pg mL^–1 depending on milk type. Having in mind the 1:10 dilution factor, these results are still a success. For the first time a commercially available antibody was incorporated into an immunoassay for progesterone detection in bovine milk, giving a detection limit below 1 ng mL^–1 for a fully automated biosensor. Thus the outstanding progress made with this biosensor in environmental monitoring and water analysis has now been successfully adapted to milk analysis for use in the field of reproduction management.Dedicated to the memory of Wilhelm Fresenius.     

Kinetic–Spectrophotometric Determination of Trace Silver(I) Using Its Catalytic Effect on the Oxidation Reaction of Fuchsin by Peroxodisulfate in the Presence of 1,10-Phenanthroline As an Activator

A kinetic spectrophotometric method for the determination of trace amounts of Ag(I) in the range of 2–20 ng mL^–1 is reported. The method is based on the catalytic effect of Ag(I) on the oxidation reaction of fuschin by potassium peroxodisulfate in the presence of 1,10-phenanthroline as an activator at pH = 5. The reaction is followed spectrophotometrically by measuring the change in absorbance (A) at 544 nm using a fixed time method (6 min). The reaction variables were optimized in order to achieve the highest sensitivity. The 3s criterion detection limit was 0.7 ng mL^–1, and the relative standard deviation for ten replicate measurements of 16 ng mL^–1 of Ag(I) was 0.95% (n = 10). The method was successfully applied to the determination of silver in expired black and white photographic films and results showed good agreements with those obtained by atomic absorption spectrometry.     

Simple extraction of phencyclidine from human body fluids by headspace solid-phase microextraction (SPME)

Summary Phencyclidine (PCP) was found to be extractable by headspace solid-phase microextraction (SPME) from human whole blood and urine. Sample solutions were heated at 90°C in the presence of NaOH and K₂CO₃, and an SPME fiber was exposed in the headspace of a vial for 30 min. Immediately after withdrawal of the fiber, it was analyzed by gas chromatography with surface ionization detection (GC-SID). Recoveries of PCP were approximately 9.3–10.8% and 39.8–47.8% for whole blood and urine samples, respectively. The calibration curve for PCP showed good linearity in the range 2.5–100 ng mL^–1 whole blood and 0.5–100 ng mL^–1 urine. The detection limits were approximately 1.0 ng mL^–1 for whole blood and 0.25 ng mL^–1 for urine.     

Use of High-Performance Liquid Chromatography–UV and Gas Chromatography–Mass Spectrometry for Determination of the Imidacloprid Content of Honeybees, Pollen, Paper Filters, Grass, and Flowers

Imidacloprid is a new insecticide with a wide range of action. Because honeybees are very sensitive to this substance, two techniques (HPLC–UV and GC–MS) which enable its detection in several matrices of both animal and vegetable origin were used to monitor its possible presence in cultivated land. In the first method quantification of imidacloprid in honeybees was achieved by use of the external standard method; the detection limit was 50 mg kg^–1, the linear range 0.05–1 mg mL^–1, recovery 60–83%, and the imprecision (coefficient of variation) 8.6% for repeatability and 11.8% for reproducibility. Recovery from pollen was 71–98% in the range 0.05–0.5 mg kg^–1. The repeatability was 9.2–13.9%. Imidacloprid can often be found in the environment, not as a simple molecule but as a group of degradation products. The GC–MS method could be used to quantify all these species as oxidation products and to determine the initial quantity of imidacloprid by use of a conversion factor. The liquid chromatographic analysis could be used to detect, in a standard solution, 10 ng mL^–1 derivatized 6-chloronicotinic acid. The linearity was good (R=0.999) over a wide concentration range (10 g mL^–1–10 ng mL^–1). Several samples with different matrices (filter paper placed on an pneumatic corn seed drill, grass, flowers, honeybees, etc.) obtained during the sowing period for imidacloprid-treated corn were analyzed. The quantification limit (LOQ) was 0.005 mg kg^–1 for grass and flowers, 0.002 mg kg^–1 for honeybees, and 0.024 mg kg^–1 for paper filters.     

High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.     

2-(5-Nitro-2-Pyridylazo)-5-(N-Propyl-N-Sulfopropylamino)Phenol as a new analytical reagent for flow-injection spectrophotometric determination of trace vanadium(V)

A flow injection method using 2-(5-nitro-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)phenol-(Nitro-PAPS) as a new chromogenic reagent is presented for sensitive and rapid determination of vanadium. Nitro-PAPS reacts with vanadium(V) in weakly acidic medium to form a water soluble complex of molar absorptivity of 8.0 × 10⁴L mol^–1 cm^–1 at 592 nm (maximum absorption wavelength), which permits the straightforward application of a flow injection system to the sensitive determination of vanadium. Under the optimum conditions established, a linear calibration graph was obtained in the range 1–120 ng mL^–1. The relative standard deviation for 60 ng mL^–1 vanadium was 2.2% (n = 5) and the limit of detection was 1 ng mL^–1. The sample throughput is about 40 h^–1. Most inorganic and organic anions examined did not interfere even at concentrations of 3000–6000 times of vanadium. Interference from cobalt(II), copper(II) and nickel(II) at 200ng mL^–1 levels can be overcome by the addition of N-(dithio-carboxy)sarcosine. The recoveries for each 20 and 10 ng mL^–1 vanadium added to the river water were 98 and 97%, respectively.The authors express their thanks to Miss Miho Suzuki and Miss Hiroyo Yamada for their experimental assistance in part.     

Microdialysis sampling and high-performance liquid chromatography with chemiluminescence detection for in-vivo on-line determination and study of the pharmacokinetics of levodopa in blood

A simple, reliable, and reproducible method for in-vivo on-line separation and determination of levodopa has been based on microdialysis then high-performance liquid chromatography with chemiluminescence detection. The perfusate is perfused at a flow rate of 5 L min^–1. The concentration of levodopa in the dialysate is determined on line with a chemiluminescence system. The dialysate sample volume is approximately 20 L. The response of the system is linearly related to the concentration of levodopa in the range 1×10^–8 to 1×10^–6 g mL^–1 (r²=0.9995) with a detection limit (3) of 3×10^–9 g mL^–1 and sample throughput of 12 h^–1; RSD is 2.8% (n=11). The method has been successfully used to study the pharmacokinetics of levodopa in vivo; the values of the pharmacokinetics parameters C_max, AUC_0–t and T_max were 16.60, 20.92 ng mL^–1, and 90 min, respectively.     

Kinetic Determination of Mercury(II) at Trace Level from Its Catalytic Effect on a Ligand Substitution Process

A catalytic kinetic method (CKM) is presented for the determination of mercury(II) based on its catalytic effect on the rate of substitution of N-methylpyrazinium ion (Mpz⁺) onto hexacyanoferrate(II). The progress of the reaction was monitored spectrophotometrically at 655 nm by registering the increase in absorbance of the product [Fe(CN)₅(Mpz]²⁻ under the reaction conditions: 5 × 10⁻³ mol L⁻¹ [Fe(CN)₆]⁴⁻), 5 × 10⁻⁵ mol L⁻¹ [Mpz⁺], T = 25.0 ± 0.1°C, pH 5.00 ± 0.02 and ionic strength, I = 0.1 mol L⁻¹ (KNO₃). Quantitative rate data at specified experimental conditions showed a linear dependence of the absorbance after fixed time A _t on the concentration of mercury(II) catalyst in the range 20.06–702.1 ng mL⁻¹. The maximum relative standard deviations and percentage errors for the determination of mercury(II) in the range of 20.06–200.6 ng mL⁻¹ were calculated to be 1.7 and 2.7% respectively. The detection limit was found to be 7.2 ng mL⁻¹ of mercury(II). Accuracy (expressed in terms of recoveries) was in the range of 98–103%. Figures of merit and interference due to many cations and anions was investigated and discussed. The applicability of the method was demonstrated by determining the mercury(II) in different synthetic samples and confirming the results using atomic absorption spectrophotometry. The proposed method allowed determination of mercury(II) in the range 20.06–702.1 ng mL⁻¹ with very good selectivity and an output of 30 samples h⁻¹.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 6, 2005, pp. 654–661.Original English Text Copyright © 2005 by Surendra Prasad.This article was submitted by the author in English.     

High-Performance Liquid Chromatography with Electrospray Mass Spectrometry for Rapid and Sensitive Determination of Sanguinarine and Chelerythrine in Exogenously Contaminated Honey

A simple, rapid, and sensitive high-performance liquid chromatographic (HPLC) method coupled with electrospray mass spectrometry (ESI-MS) has been used to determine sanguinarine and chelerythrine in exogenously contaminated honey. Sample extracts were separated on a C₈ reversed-phase HPLC column with acetonitrile–acetate buffer (40:60) as mobile phase. After ESI the abundance of protonated molecules was recorded by selected-ion recording (SIR) of m/z 332.5, 348.5, and 356.5 for sanguinarine, chelerythrine, and the internal standard, tetrahydropalmatine, respectively. The internal standard technique was used to construct calibration plots for quantitation of sanguinarine and chelerythrine; the linear ranges were 5.25–1050 and 3.75–750 ng mL^–1, respectively, with correlation coefficients of 0.9993 and 0.9989, respectively. The limits of detection for sanguinarine and chelerythrine were 1.60 and 1.11 ng mL^–1, respectively.     

Flow injection chemiluminescence determination of naftopidil based on potassium permanganate oxidation in the presence of formaldehyde or formic acid

A flow injection method is proposed for the determination of naftopidil based upon the oxidation by potassium permanganate in a sulfuric acid medium and sensitized by formaldehyde and formic acid. The optimum chemical conditions for the chemiluminescence emission were 0.25 mM potassium permanganate and 4.0 M sulfuric acid. Two manifolds were tested and instrumental parameters such as the length of the reactor, injection volume and flow rate were compared. When using the selected manifold in the presence of 0.4 M formaldehyde, naftopidil gives a second-order calibration graph over the concentration range 0.1–40.0 mg L^–1 with a detection limit calculated (as proposed by IUPAC) of 92.5 ng mL^–1 and a standard deviation of 0.12 mg mL^–1 for ten samples of 10.0 mg L^–1 naftopidil. In the presence of 1.15 M formic acid, naftopidil gives a second-order calibration graph over the concentration range 0.05–40.0 mg L^–1 with a detection limit of 14.2 ng mL^–1 and a standard deviation of 0.37 mg mL^–1 for ten samples of 10.0 mg L^–1 naftopidil. In both cases, the determination is free from interferences from common excipients such as sucrose, glucose, lactose, starch and citric acid.     

One-step fabrication of three-dimensional porous calcium carbonate–chitosan composite film as the immobilization matrix of acetylcholinesterase and its biosensing on pesticide

This work reports on a novel nanosized calcium carbonate–chitosan (nanoCaCO₃–chi) composite film fabricated by a one-step co-electrodeposition method. The generated nanoCaCO₃-based matrix possessed a three-dimensional (3D) porous, network-like structure, providing a favorable and biocompatible microenvironment to immobilize enzyme. By using such a composite film as enzyme immobilization matrix, a highly sensitive and stable acetylcholinesterase (AChE) sensor was achieved for determination of methyl parathion as a model of organophosphate pesticides (OPs) compounds. The inhibition of methyl parathion was proportional to its concentration ranging from 0.005–0.2 to 0.75–3.75 μg mL⁻¹. The detection limit was found to be as low as 1 ng mL⁻¹ (S/N = 3). The designed biosensor exhibited good reproducibility and acceptable stability.     

A new and sensitive resonance-scattering method for determination of trace nitrite in water with rhodamine 6G

In the medium HCl–KI–rhodamine dye, NO₂^– reacts with excess I^– to form I₃^– and the I₃^– and rhodamine dye combine to form an association particle which gives three resonance-scattering (RS) peaks at 320 nm, 400 nm, and 595 nm. In systems containing rhodamine 6G (Rh6G), rhodamine B (RhB), rhodamine S (RhS), and butyl rhodamine B (BRhB) the resonance scattering intensity at 400 nm is proportional to nitrite concentrations in the range 2.3–276 ng mL^–1, 9.2–184 ng mL^–1, 9.2–184 ng mL^–1, and 9.2–92 ng mL^–1, respectively. Because of the high sensitivity, wide linear range, and good stability of the Rh6G system, it has been used for determination of nitrite in water samples, with satisfactory results. The spectral results have been used to verify that the formation of (Rh6G·I₃)_n association particles and their interface with the system are main factors that cause the RS enhancement.     

Determination of risperidone at picogram level in human urine by luminol—H2O2 chemiluminescence

A simple flow-injection chemiluminescence method with synergistic enhancement has been investigated for the rapid and sensitive determination of antipsychotic risperidone. The synergistic action was significant in the chemiluminescence system of luminol—hydrogen peroxide with risperidone as an enhancer. The increased chemiluminescence intensity was correlated with risperidone concentration within the range from 10 pg mL⁻¹ to 1.0 ng mL⁻¹ with relative standard deviations lower than 5.0 % and the detection limit of 4 pg mL⁻¹. At a flow rate of 2.0 mL min⁻¹, the flow-injection chemiluminescence method exhibited both a high sensitivity and excellent selectivity giving a throughput of 120 times per hour. The proposed method was successfully applied to determine the risperidone content in human urine without any pretreatment. It was found that the excretive amounts of risperidone reached their maximum after taking 2.0 mg of risperidone for 1 h, with a total excretive ratio of 17.37 % in 8.5 h.     

HPLC Determination and Pharmacokinetic Study of Valdecoxib in Human Plasma

A sensitive, simple, and accurate high-performance liquid chromatographic method has been developed for determination of valdecoxib and the internal standard rofecoxib in human plasma. Protein was precipitated from plasma samples by addition of perchloric acid (HClO₄); the drug was then extracted with diethyl ether. Separation was performed on a Cosmosil C₁₈ column (150 mm × 4.6 mm i.d., 5 m particles) with ammonium acetate buffer-acetonitrile, 60:40 (v/v), containing 0.1% TEA, pH 6.5, as mobile phase. Detection and quantification were performed by UV-visible detection at 239 nm. Detection and quantification limits were 3 and 5 ng mL^–1, respectively. The linear concentration range for valdecoxib was 5–400 ng mL^–1. The validated RP HPLC method was used for determination of the pharmacokinetic data for the drug in humans.     

Determination of Lercanidipine Hydrochloride and Its Impurities in Tablets

The reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed for determination of lercanidipine hydrochloride and its synthetic impurities, degradation and oxidative products in Carmen^® tablets. The best separation was performed on Zorbax SB C18 column, 250 x 4.6 mm, particle size 5 m. Acetonitrile-water-triethylamine 55:44.8:0.2 (v/v/v) was used as a mobile phase with flow rate 1 mL min^–1. pH was adjusted to 3.0 with orthophosphoric acid. UV detection was performed at 240 nm. Duration of chromatographic run was about 12 min for six examined compounds. The chromatographic conditions for the determination of lercanidipine hydrochloride and its related substances were the same, but the concentration of lercanidipine hydrochloride was 0.03 mg mL^–1 for assay and 0.3 mg mL^–1 for related substances. The validation of the method performance characteristics (figures of merits, quality of parameters) was established to be adequate for the intended use. The evaluation of number of parameters, such as selectivity, linearity, accuracy, specificity, precision (repetability and reproducibility), sensitivity and detection and determination limits is entailed.Acknowledgements This work was supported by the Institute of Pharmacy of Serbia, Belgrade and by the Ministry for Science, Technology and Development of Serbia, Contact: 1458     

Enhanced sensitivity electrochemical assay of low-molecular-weight heparins using rotating polyion-sensitive membrane electrodes

Use of a novel rotating polycation-sensitive polymer membrane electrode yields sensors that can serve as simple potentiometric titration endpoint detectors for the determination of three FDA approved low-molecular-weight heparin (LMWH) anticoagulant drugs (Fragmin, Normiflo, and Lovenox). The rotating electrode configuration dramatically improves the reproducibility and increases the sensitivity for LMWH determinations by protamine titration. At a rotation speed of 3000 rpm, electrodes with optimized thin (50 µm) polymer membranes doped with dinonylnaphthalene sulfonate (DNNS) respond to low levels of protamine (<2 µg mL^–1) with good precision (±1 mV, N=10), when protamine is infused continuously into a Tris-buffer solution, pH 7.4. When infusing protamine (at 5 µg min^–1) continuously into solutions containing Fragmin, a clear endpoint is obtained, with the amount of protamine required to reach this endpoint proportional to the level of Fragmin present. A detection limit of less than 0.02 U mL^–1 Fragmin can be obtained via this new method, approximately one order of magnitude lower than that previously reported based on a non-rotating polycation electrode. Similar low detection limits can be achieved for potentiometric titrations of Normiflo and Lovenox. Such titrations can also be carried out in undiluted plasma samples containing the various LMWH species. In this case, detection of the LMWHs at clinically relevant concentrations (>0.2 U mL^–1) can be readily achieved.