The Influence on Interfacial Tension of the Combination of Anionic and Cationic Surfactants: Alkyl Sulfonate/Alkyltrimethylammonium Bromide

Mioellization of aqueous mixture of sodium octyl sulfonate ( C₈As )/ cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfonate (C₁₂As)( CTAB in the presence of sodium bromide has been studied by surface tension measurement. Nonideal solution theory has been used to calculate the molecular interaction parameters (β^M and β^s). The oil-aqueous interfacial tensions of C₁₂As/ CTAB, C₈As/CTAB, C₁₂As/dodecyl trimethylammonium bromide (DTAB) systems were also measured. We studied the influence of the surfactant concentration, surfactant molar fraction ratio, hydrocarbon chain length, added NaCl and alcohol concentration on the interfacial tension.     

A comparison study between sodium dodecyl sulfate and sodium dodecyl sulfonate with respect to the thermodynamic properties,micellization, and interaction with poly(ethylene glycol) in aqueous solutions

The density, sound velocity, and conductivity measurements were performed on aqueous solutions of sodium dodecyl sulfate (C₁₂H₂₅SO₄Na) or sodium dodecyl sulfonate (C₁₂H₂₅SO₃Na) in the absence and presence of poly(ethylene glycol) (PEG) at different temperatures. Changes in the apparent molar volumes and isentropic compressibilities upon micellization were derived using a pseudophase-transition approach and the infinite dilution apparent molar properties of the monomer and micellar form of C₁₂H₂₅SO₄Na and C₁₂H₂₅SO₃Na were determined. Variations of the critical micelle concentrations (CMCs) of both surfactants in the solutions investigated with temperature were obtained from which thermodynamic parameters of micellization were estimated. It was found that at low temperature the micelle formation process is endothermic and therefore, this process must be entropically driven. However, upon increasing the temperature, the enthalpic factor becomes more significant and, at temperatures higher than 303.15 K the micellization is enthalpy driven. The interactions between C₁₂H₂₅SO₄Na/C₁₂H₂₅SO₃Na and PEG were studied and it was found that sodium alkyl sulfonates were seen to interact more weakly than their sulfate analogues.     

Synthesis and properties of nonylphenol-substituted dodecyl sulfonate

Nonylphenol-substituted dodecyl sulfonate (C₁₂-NPAS) was synthesized via sulfonation-alkylation-neutralization using 1-dodecene, SO₃, and nonylphenol as raw materials. The properties such as surface tension, interfacial tension (IFT), wettability, foam properties, and salinity tolerance of C₁₂-NPAS were systematically investigated. The results show that the critical micelle concentration (CMC) of C₁₂-NPAS was 0.22?mmol?·?L^?1 and the surface tension at the CMC (γ_CMC) of C₁₂-NPAS was 29.4 mN/m. When compared with the traditional surfactants sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), and linear alkylbenzene sulfonate (LAS), the surface properties of C₁₂-NPAS were found to be superior. The IFT between Daqing crude oil and a weak-base alkaline/surfactant/polymer (ASP) oil flooding system containing 0.1?wt% of C₁₂-NPAS can reach an ultralow level of 2.79?×?10^?3 mN/m, which was lower than that found for the traditional surfactant heavy alkylbenzene sulfonate (HABS). The salinity and hardness tolerance of C₁₂-NPAS were much stronger than those found for conventional surfactants, petroleum sulfonate, and LAS. C₁₂-NPAS also shows improved wetting performance, foamability, and foam stability.     

Lamellar phase formation in catanionic mixtures of hydrogenated and fluorinated surfactants: a comparative study

The properties and phase behaviors of the catanionic mixtures consisting of tetradecyltrimetylammonium bromide (TTABr) and different anionic surfactants (i.e., sodium docanoate, C₁₀HOONa; sodium laurate, C₁₂HOONa; sodium perfluorodecanoate, C₁₀FOONa) were examined, in particular when the molar mixing ratio in the aqueous solution was exactly 1:1. Although the three inspected systems have identical head groups and counterions, they exhibited very different lamellar (L_α) phases. When using the hydrogenated surfactants, the C₁₀HOONa–TTABr system formed domain-like L_α/L₁ two phases and the C₁₂HOONa–TTABr system formed cream-like L_α/L₁ two phases, respectively. In the case of the perfluorinated surfactant, the C₁₀FOONa–TTABr system formed interdigitated and tilted L_α gel. The microstructures of the three L_α phases were characterized by polarized microscope, freeze-fracture transmission electron microscope, small angle X-ray scattering, and X-ray diffraction. The phase transition of the lamellar gel at different temperature was studied by differential scanning calorimetry and rheological measurements. The results elucidated the formation of the L_α phase in catanionic mixtures containing hydrogenated or fluorinated anionic surfactants with molar mixing ratio of 1:1.     

Selective reactivities and accessibilities of the hydroxyl groups in cotton cellulose based on equilibrium data from a reversible chemical reaction

In order to determine the relative equilibrium constants for reactions of the hydroxyl groups at C₂, C₃, and C₆ of the D-glucopyranosyl units, methyl vinyl sulfone was reacted with cellulose dissolved in benzyltrimethylammonium hydroxide. The reaction was carried to constancy in distribution of substituents between the 2–0– and 6–0–positions. The distributions of substituents in the D-glucopyranosyl units were measured by gas-liquid chromatographic analysis of the products from hydrolysis of the modified cellulose. Relative equilibrium constants were then evaluated, assuming complete accessibility of all three types of hydroxyl groups of the cellulose in solution. For determination of the relative accessibilities of the individual types of hydroxyl groups in heterogeneous reactions of cotton cellulose with methyl vinyl sulfone, the reactions were carried to equilibrium distributions in media of various normalities of sodium hydroxide (i.e., media of various swelling strength). The distributions of substituents in the D-glucopyranosyl units were measured. From these values and the ratio of equilibrium constants, the relative accessibilities of the hydroxyl groups at C₂ versus those at C₆ were calculated. Apparent accessibilities of the hydroxyl groups at C₂ are approximately double those at C₆ when the reaction is carried out in 1N sodium hydroxide and about triple those at C₆ when the reaction is carried out in 0.5N sodium hydroxide.     

Solubilities of imidazolium-based ionic liquids in aqueous salt solutions at 298.15 K

The solubilities of ionic liquids in the ternary systems (ionic liquid + H₂O + inorganic salt) were reported at 298.15 K and atmospheric pressure. The examined ionic liquids are [C₄mim][PF₆] (1-n-butyl-3-methylimidazolium hexafluorophosphate), [C₈mim][PF₆] (1-n-octyl-3-methylimidazolium hexafluorophosphate), and [C₈mim][BF₄] (1-n-octyl-3-methylimidazolium tetrafluoroborate). The examined inorganic salts are the chloride-based salts (sodium chloride, lithium chloride, potassium chloride, and magnesium chloride) and the sodium-based salts (sodium thiocyanate, sodium nitrate, sodium trifluoroacetate, sodium bromide, sodium iodide, sodium perchlorate, sodium acetate, sodium hydroxide, sodium dihydrogen phosphate, sodium phosphate, sodium tetrafluoroborate, sodium sulfate, and sodium carbonate). The effects of the cations and the anions of the ionic liquids and of the inorganic salts on the solubility of the ionic liquids in the ternary solutions were systematically compared and discussed.     

Structure and properties of superconducting and nonsuperconducting alkali-metal fullerides axc60 (A = Na,K, Rb,or Cs)

Shielding diamagnetism and X-ray powder diffraction were used to characterize alkali-metal fullerides of sodium, potassium, rubidium, and cesium. The superconducting phase in both the potassium and rubidium systems has the composition A₃C₆₀ and a face centered cubic structure with alkali metal filling all octahedral and tetrahedral sites of close packed C₆₀, layers. High pressure magnetic susceptibility measurements on K₃C₆₀ showed a negative pressure dependence on the superconducting transition temperature of −0.78 K/kbar. No evidence for superconductivity was observed in either the sodium or cesium systems, even though Na₃C₆₀ appears isostructural with K₃C₆₀ and Rb₃C₆₀.     

Microstructures of Aqueous Two‐Phase Systems Formed by Mixture of Polymer and Cationic‐Anionic Surfactants

Microstructure and phase behavior of decyltriethylammonium bromide (C₁₀NE)/sodium decylsulfonate (C₁₀SO₃)/poly(ethylene oxide) (PEO)/water quaternary systems were studied by freeze‐fracture transmission electron microscopy, small angle X‐ray diffraction, and dynamic light scattering methods. Aqueous two‐phase systems (ATPS) could be prepared by properly mixing the aqueous solution of PEO and equimolar mixed C₁₀NE and C₁₀SO₃. It was shown that the top phase of the ATPS was surfactant‐enriched and mainly composed of multi‐lamellar structure, while the bottom phase of the ATPS was polymer‐enriched in which some vesicles were observed.     

Facile Multiple Alkylations of C60 Fullerene

The reduction of fullerene (C₆₀) with sodium dispersion in the presence of an excess amount of dipropyl sulfate was found to yield highly propylated fullerene, C₆₀(nC₃H₇)_n (max. n = 24), and C₆₀(nC₃H₇)₂₀ was predominantly generated as determined by mass spectroscopy.     

Recent advances in molecuar and supermolecuar characterization of cellulose and cellulose derivatives

Recent advances between 1985 and early 1993 in the following topics of the characterization of molecular structure and molecular properties of cellulose and its derivates (CD) made in the authors' laboratories are briefly reviewed: (1) A theoretical basis of the assignment of carbonyl carbon peaks of ¹³C NMR spectra on cellulose acetate (CA) was given, especially when the total degree of substitution <<f>> is below 3. (2) Molar fractions of 8 kinds of unsubstituted and partially or fully substituted anhydroglucopyranose units were successfully determined for CA and sodium cellulose sulfate (NaCS). (3) The sequence distribution of substituted and unsubstituted anhydroglucopyranose units along a water–soluble CA chain was evaluated. (4) C₆-substituted (i.e., 6-O-acetyl) CA and C₂- and C₆-substituted CA were synthesized, and the full assignment of the ¹³C NMR spetrum of the former was given and a new method for evaluating the degree of substitution at C₆ position was proposed. (5) By destructing the intramolecular hydrogen bonding, cellulose becomes soluble in aq. sodium hydroxide. The specific supermolecular structure of aq. sodium hydroxide, dissolving mechanism, dissolved state and molecular parameters of cellulose in aq. sodium hydroxide were discussed. (6) The solubility behavior of CA with a wide range of total degree of substitution in solvents including water, acetone/water and acetone is controlled by the distribution of substitution and the supermolecular structure. (7) The existence of O₃-H … O'₅ intramolecular hydrogen bonds in a water-in soluble cellulose derivative with hydrophilic substituent (NaCEC) was confirmed by CP/MAS ¹³C NMR and deuteration IR method. At a relatively low degree of substitution the solubility of the derivative in water or aqueous alkali was mainly governed by considerable destruction of the intramolecular hydrogen bonds. (8) The persistence length q, evaluated directly by small-angle X-ray scattering (SAXS) on CA with different total degree of substitution <<f>> ranging from 0,8 to 2,9 confirmed definitely the conclusion drawn before by Kamide and Saito on the molecular rigidity of CD, especially the effect of <<f>> on q. (9) C₆-substituted CA shows different solubility towards dimethylacetamide and water at 20°C, as compared with C₂- and C₃-subsituted CA and C₂-, C₃- and C₆- substituted CA, whose <<f>> is ca. 0,6.     

Effect of Organic Solvents on the Electrodeposition of Copper from Acidified CuSO4

Using Guerbet tetradecyl alcohol C₁₄GA (synthesized by Guerbet reaction using 1-heptanol as raw material) as intermediate, sodium Guerbet tetradecyl polyoxyethylene ether sulfates [C₁₄GA(EO)_nS, n = 1, 2, 4] were obtained through following steps: synthesizing Guerbet tetradecyl polyoxyethylene ether alcohols [C₁₄GA(EO)_nH, n = 1, 2, 4] by Williamson reaction, then esterifying with chlorosulfonic acid so as to form Guerbet tetradecyl polyoxyethylene ether alcohol sulfates [C₁₄GA(EO)_nSO₃H, n = 1, 2, 4], and finally neutralizing with sodium hydroxide; while sodium Guerbet tetradecyl sulfate(C₁₄GAS) was synthesized only through esterifying and neutralizing reactions. The structures of these anionic surfactants were determined by infrared, nuclear magnetic resonance, and element analysis. The surface activity of these surfactants was studied by means of surface tension. The results have shown that these surfactants possess higher surface activity than the common surfactant C₁₂H₂₅OSO₃Na. Branched-tail structure coming from Guerbet alcohol makes the anionic surfactant (C₁₄GAS) have higher critical micelle concentration (CMC) and better effectiveness in lowering the interface tension between air and water than their linear counterpart (C₁₄H₂₉OSO₃Na). Introducing oxyethyene group into the place between head group and tail group of the surfactant molecule with branched tail can lower the CMC, γ_cmc, and Krafft point. And the effectiveness for reducing the CMC, γ_cmc, Γ_max, and Krafft point of surfactant increased with the increase of oxyethylene group number (n = 1, 2, 4). The relationship between the molecular structure and surface activity of surfactant is discussed.     

β-环糊精与十四烷基硫酸钠和全氟辛酸钠等摩尔混合体系的相互作用

通过¹H NMR和¹⁹F NMR相结合的方法研究了十四烷基硫酸钠(C₁₄H₂₉SO₄Na, STS)和全氟辛酸钠(C₇F₁₅COONa, SPFO)等摩尔混合体系与β-环糊精(β-CD)的相互作用. 实验发现, 尽管STS的临界胶束浓度(cmc)明显小于SPFO, 即在水溶液中STS的疏水性要强于SPFO, 但是β-CD仍首先选择性包结SPFO形成1∶1包结物, 然后随β-CD浓度增加主要生成STS的1∶1包结物, 最后STS的2∶1 (β-CD/STS)包结物和SPFO的2∶1 (β-CD/SPFO)包结物同时生成. 结合我们以前的工作, 本文表明, 随着碳氢表面活性剂烷基硫酸钠的链长(8～12)进一步增加到14, β-CD对氟表面活性剂SPFO的选择性进一步减弱. 也就是说, 由于β-CD的空腔和碳氟链更加匹配以及碳氟链的刚性使得β-CD/SPFO包结物的形成始终更为有利, 但这两类表面活性剂疏水性的差别对于这种选择性的程度会产生一定影响.     

Ferrocene Derivatives of Valine and Leucine

Methyl and ethyl esters of valine and leucine were reacted with ferrocenecarbaldehyde to obtain azomethines (C₅H₅)Fe(C₅H₄CH=NCHRCOOR′) whose reactions with sodium borohydride provide ferrocenylmethyl derivatives (C₅H₅)Fe(C₅H₄CH₂NHCHR⋅COOR′) [R=(CH₃)₂CH, (CH₃)₂CHCH₂; R′ = CH₃, C₂H₅]. The latter compounds react with sodium hydroxide to give, after treatment of the reaction mixtures with acetic acid, N-substituted amino acids (C₅H₅)Fe(C₅H₄CH₂NHCHRCOOH).__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 6, 2005, pp. 1046–1048.Original Russian Text Copyright © 2005 by Popova, Yurashevich, Cherevin, Gulevich, Reshetova, Knizhnikov.     

Interaction of Novel Anionic Gemini Surfactants with Dodecyl Sodium Sulfate in Aqueous NaCl Medium and the Performance of Their Mixtures

The interaction in two mixtures of two novel anionic gemini surfactants, sodium 2,2′-(6,6′-(ethane-1,2-diylbis(azanediyl)bis(4-(hexylamino)-1,3,5-triazine-6,2-diyl)bis(azanediyl)diethanesulfonate (C₆-2-C₆) and sodium 2,2′-(6,6′-(ethane-1,2-diylbis(azanediyl)bis(4-(octylamino)-1,3,5-triazine-6,2-diyl) bis(azanediyl) diethanesulfonate (C₈-2-C₈), and conventional anionic surfactants, sodium dodecyl sulfate (SDS), have been investigated in 0.1 M NaCl aqueous solutions. The mixed systems are C₆-2-C₆/SDS and C₈-2-C₈/SDS, and the mole factions (α_G) of geminis are 0.1, 0.3, 0.5, 0.7, and 0.9, respectively. Mixtures of both C₆-2-C₆/SDS and C₈-2-C₈/SDS exhibit synergism in surface tension reduction efficiency and mixed micelle formation. But, all mixtures except C₆-2-C₆/SDS (α_G = 0.7), C₆-2-C₆/SDS (α_G = 0.9), and C₈-2-C₈/SDS (α_G = 0.1) don't exhibit synergism in surface tension reduction effectiveness. The performances, such as wetting, emulsification, and dispersion were measured and the results showed all mixtures posses application properties.     

Effect of Alkyl Chain Length on the Interfacial Dilational Properties of Hydroxy-Substituted Alkyl Benzenesulfonates

Dilational rheological behaviors of adsorption layers of three surfactants, sodium 2-hydroxy-3,5-dioctyl benzene sulfonate (C₈C₈), sodium 2-hydroxy-3-octyl-5-decyl benzene sulfonate (C₈C₁₀), and sodium 2-hydroxy-3-octyl-5-dodecylbenzenesulfonate (C₈C₁₂) formed at air–water and decane–water interfaces, have been investigated as a function of concentration and frequency (0.002–0.1 Hz) by the oscillating bubble/drop method. The experimental results show that the dilational moduli of hydroxy-substituted alkyl benzenesulfonates are obviously higher than those of the common surfactants, because the interfacial interactions between alkyl chains are improved drastically by the unique arrangement of C₈C₈ molecules at the interface. However, the moduli at the decane–water interface are much lower than those at the surfaces because decane molecules will insert into the surfactant molecules adsorbed at the interface and destroy the interactions between alkyl chains. With an increase in the number of carbon atom of 5-alkyl, the surface dilational modulus decreases because the orientation of the surfactant molecules at the surface varies from parallel to tilt. On the other hand, the diffusion-exchange process dominates the interfacial behavior and the interfacial modulus improves with the increase in the length of the alkyl chain.     

Study on Binding Properties of Poorly Soluble Drug Trimethoprim in Anionic Micellar Solutions

Binding and distribution properties of trimethoprim (TMP) in the presence of various anionic surfactants; sodium octyl sulfate (C₈SO₄Na), sodium decyl sulfate (C₁₀SO₄Na), sodium lauryl sulfate (C₁₂SO₄Na), and sodium tetradecyl sulfate (C₁₄SO₄Na) has been studied by conductivity, spectrophotometry and surface tension measurements. The surface properties of anionic surfactants, that is, maximum surface excess concentration (Γ _max ) and minimum area per surfactant molecule (A _min ) at the air/water interface have been evaluated in the absence and presence of TMP using Gibbs adsorption isotherm. From conductivity data the ionization degree and counterion binding parameter have been obtained. Spectrophotometric experiments were used to determine binding constants of TMP to anionic micelles. With the increasing alkyl chain of surfactants, the interaction becomes stronger, which shows the importance of hydrophobic forces and incorporation of TMP molecules to the pure micelles of anionic surfactants increased. The results obtained from the surface tension and conductometric studies have been correlated with those obtained from the spectroscopic studies and binding tendency of TMP to anionic micelles followed the order as: C₁₄SO₄Na > C₁₂SO₄Na > C₁₀SO₄Na > C₈SO₄Na. From these results, the study of the interaction TMP in different anionic micellar solutions provided information about the characteristics of binding properties of poorly soluble drugs.     

Synthesis and characterization of some metal(II) and sodium ions with cyclopentane-1,2,3,4-tetracarboxylate anion

New divalent metal cyclopentane-1,2,3,4-tetracarboxylate (CPTC) hydrates of empirical formula M₂C₅H₆(COO)₄ · nH₂O, where M = Ni, Co, Cu, or Zn and n = 3?6, and sodium CPTC Na₃C₅H₆COOH(COO)₃ · 7H₂O have been prepared and characterized by elemental analysis, magnetic measurements, thermal, and infrared spectral studies. For the sodium salt, a single crystal (Na₃C₅H₆COOH(COO)₃ · 8H₂O) was also obtained. IR spectra of the metal(II) complexes indicate the coordination of metal ions through all carboxylates. For the sodium compound, a band at 1681 cm^?1 indicates that some carboxylic groups have not been deprotonated. The presence of protonated carboxylic group was also confirmed by an X-ray single crystal analysis. On heating in air atmosphere, all complexes lose water molecules and next anhydrous compounds decompose to corresponding metal oxides and sodium carbonate.     

L-cysteine-based trimeric surfactants with hexahydro-1,3,5-triazine as the central core: Synthesis and self-assembly study

Novel trimeric surfactants consisting of three units of sodium N-acyl-L-cysteine linked with hexahydro-1,3,5-triazine as the central core ((C_nCy)₃Na₃, where n represented alkyl chain carbon number of 8, 10, and 12) were synthesized. Their conjugated acids were analyzed using FTIR, NMR, and ESI-MS to elucidate their chemical structures. The surface activity properties of (C_nCy)₃Na₃ were determined using surface tension and electrical conductivity measurements. It was found that (C₁₂Cy)₃Na₃ had a critical aggregation concentration (CAC) two orders of magnitude lower than that of the corresponding monomeric surfactant sodium N-lauroyl-L-cysteine (C₁₂CyNa). The value of the minimum surface area per molecule (A_min) of (C₁₂Cy)₃Na₃ was almost three times greater than that of C₁₂CyNa due to the increase in the degree of oligomerization. With the alkyl chain length increasing from 8 to 12, the CAC values decreased, and the values of the surface tension at CAC (γ_CAC) and the efficiency of the surface adsorption (pC₂₀) increased. Furthermore, dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to evaluate the size and morphology of the aggregates at 10CAC. The results indicate that (C_nCy)₃Na₃ can spontaneously self-assemble into spherical or ellipsoid aggregates, and the surfactants with longer chain length can form larger aggregates due to greater hydrophobic interactions.     

Precipitation of Bismuth(III) Tartrates from Nitrate Solutions

The precipitation of bismuth(III) from nitrate solutions on addition of aqueous solutions of tartaric acid and sodium tartrate was studied by X-ray phase analysis, thermogravimetry, IR spectroscopy, and chemical analysis. Conditions for the formation of [Bi(NO₃)(H₂O)₃]C₄H₄O₆ and [Bi(C₄H₄O₆)(C₄H₅O₆)] · 3H₂O were determined.     

新型取代硅桥联茂稀土化合物的合成及在纳米级氢化钠助催化剂作用下高活性催化甲基丙烯酸甲酯聚合的研究

The synthesis and characterization of four new silicon-linked lanthanocene complexes with pendant phenyl groups on cyclopentadiene were reported. Based on the data of elemental analyses, MS and IR, the complexes were presumed to be unsolvated and dimeric complexes [Me2Si(C5H3CMe2C6H5)2LnC1]2 [Ln=Er (1), Gd (2), Sm (3), Dy (4)]. In conjunction with AlEt3 or sodium hydride as the co-catalyst, these complexes could efficiently catalyze the polymerization of methyl methacrylate (MMA). When the nanometric sodium hydride was used as a co-catalyst, the complexes were highly effective for the polymerization of MMA. At low temperature and in short time, in [MeESi(C5H3CMe2C6H5)2LnC1]2/NaH (nanometric) system, the polymer was obtained in more than 80% yield and the molecular weight was greater than 105. The activity reached that of organolanthanide hydride as a single-component catalyst. In ]MeESi(C5H3CMe2C6H5)2ErC1]2/Nail (nanometric) system, the effects of the molar ratio of MMA/catalyst and catalyst/co-catalyst, and the temperature on polymerization were studied.