Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Synthesis and characterization of nanoporous NaYF4:Yb3+, Tm3+@SiO2 nanocomposites

Novel upconversion nanocomposites with nanoporous structure were presented in this paper. Silica-coated cubic NaYF₄:Yb³⁺, Tm³⁺ nanoparticles were first prepared. After annealing, monodisperse cubic/hexagonal mixed phases NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles were obtained, and the NaYF₄:Yb³⁺, Tm³⁺ cores became nanoporous. To the best of our knowledge, the nanoporous structure in NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanocomposites was observed for the first time. They demonstrate increased upconversion emission compared with unannealed dense NaYF₄:Yb³⁺, Tm³⁺ nanoparticles due to the appearance of the hexagonal NaYF₄:Yb³⁺, Tm³⁺. The silica shell not only makes the nanocomposites possess bio-affinity but also protects the NaYF₄:Yb³⁺, Tm³⁺ cores from aggregating and growing up. Thus the upconversion, nanoporous and bio-affinity properties were combined into one single nanoparticle. The nanocomposites have been characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), small angle X-ray diffraction (SAXRD) and emission spectroscopy. These multifunctional nanocomposites are expected to find applications in biological fields, such as biolabels, drug storage and delivery.     

Upconversion Luminescence Properties of a LiNb0.3Ta0.7O3:Er3+,Yb3+ Ceramic

A co-doped LiNb_0.3Ta_0.7O₃:Er³⁺,Yb³⁺ ceramic was prepared by a high temperature solid state procedure. Under the excitation of 980 nm laser radiation, intense 660 nm red light and 550 nm green light emissions corresponding to the ⁴F_9/2→⁴I_15/2 and ²H_11/2/⁴S_3/2→⁴I_15/2 transitions of Er³⁺ were observed. The change of Yb³⁺ concentration has a more significant influence on luminous intensity than the Er³⁺ concentration. The emission of red and green lights is attributed to a two-photon process. The upconversion luminescence mechanisms were analyzed in detail.     

Investigation of Er3+, Yb3+, Nd3+ doped yttrium calcium oxyborate for photon upconversion applications

In this work, investigation have been done on polycrystalline yttrium calcium oxyborate (YCa₄O(BO₃)₃) for the realization of existence of second harmonic generation and other photon upconversion processes as concurrent effect with the aid of Er, Yb, Nd trivalent lanthanide ions. Pure, Er:Yb co-doped and Er:Yb:Nd triply-doped YCa₄O(BO₃)₃ samples were prepared through solid state reaction and the phase identification has been done using powder X-ray diffraction spectral analysis. FTIR spectra show that the dopants increases the absorption of functional groups and modifies the lattice vibrational modes of YCa₄O(BO₃)₃. The spectral overlap of optical absorption bands of Er³⁺, Yb³⁺, Nd³⁺ ions in 840 nm–1070 nm region indicates the prospect of energy transfer between these ions. The photoluminescence spectrum of Er:Yb:Nd triply doped sample show good enhancement compared to pure and Er:Yb co-doped YCa₄O(BO₃)₃ samples. In the photon upconversion test carried out using 1064 nm Nd:YAG laser YCa₄O(BO₃)₃:Er:Yb:Nd sample produced green light with efficiency higher than the other two samples. Surface morphology of the samples was recorded using field emission scanning electron microscope and analysed. The elemental composition of the samples has been confirmed by energy dispersive X-ray spectral analysis.     

Upconversion Luminescence through Cooperative and Energy-Transfer Mechanisms in Yb3+-Metal-Organic Frameworks

Lanthanide-doped metal–organic frameworks (Ln-MOFs) have versatile luminescence properties, however it is challenging to achieve lanthanide-based upconversion luminescence in these materials. Here, 1,3,5-benzenetricarboxylic acid (BTC) and trivalent Yb³⁺ ions were used to generate crystalline Yb-BTC MOF 1D-microrods with upconversion luminescence under near infrared excitation via cooperative luminescence. Subsequently, the Yb-BTC MOFs were doped with a variety of different lanthanides to evaluate the potential for Yb³⁺-based upconversion and energy transfer. Yb-BTC MOFs doped with Er³⁺, Ho³⁺, Tb³⁺, and Eu³⁺ ions exhibit both the cooperative luminescence from Yb³⁺ and the characteristic emission bands of these ions under 980 nm irradiation. In contrast, only the 497 nm upconversion emission band from Yb³⁺ is observed in the MOFs doped with Tm³⁺, Pr³⁺, Sm³⁺, and Dy³⁺. The effects of different dopants on the efficiency of cooperative luminescence were established and will provide guidance for the exploitation of Ln-MOFs exhibiting upconversion.     

Cooperative Sensitization Upconversion in Solution Dispersions of Co-Crystal Assemblies of Mononuclear Yb3+ and Eu3+ Complexes

Lanthanide upconversion luminescence in nanoparticles has prompted continuous breakthroughs in information storage, temperature sensing, and biomedical applications, among others. Achieving upconversion luminescence at the molecular scale is still a critical challenge in modern chemistry. In this work, we explored the upconversion luminescence of solution dispersions of co-crystals composed of discrete mononuclear Yb(DBM)₃Bpy and Eu(DBM)₃Bpy complexes (DBM: dibenzoylmethane, Bpy: 2,2′-bipyridine). The 613 nm emission of Eu³⁺ was observed under excitation of Yb³⁺ at 980 nm. From the series of molecular assemblies studied, the most intense luminescence was obtained for a 1 : 1 molar ratio of Yb³⁺ : Eu³⁺, resulting in a high quantum yield of 0.67 % at 2.1 W cm⁻². The structure and energy transfer mechanism of the assemblies were fully characterized. This is the first example of an Eu³⁺-based upconverting system composed of two discrete mononuclear lanthanide complexes present as co-crystals in non-deuterated solution.     

Intense Upconversion Luminescence of CaSc2O4:Ho3+/Yb3+ from Large Absorption Cross Section and Energy‐Transfer Rate of Yb3+

Concentration‐optimized CaSc₂O₄:0.2 % Ho³⁺/10 % Yb³⁺ shows stronger upconversion luminescence (UCL) than a typical concentration‐optimized upconverting phosphor Y₂O₃:0.2 % Ho³⁺/10 % Yb³⁺ upon excitation with a 980 nm laser diode pump. The ⁵F₄+⁵S₂→⁵I₈ green UCL around 545 nm and ⁵F₅→⁵I₈ red UCL around 660 nm of Ho³⁺ are enhanced by factors of 2.6 and 1.6, respectively. On analyzing the emission spectra and decay curves of Yb³⁺: ²F_5/2→²F_7/2 and Ho³⁺: ⁵I₆→⁵I₈, respectively, in the two hosts, we reveal that Yb³⁺ in CaSc₂O₄ exhibits a larger absorption cross section at 980 nm and subsequent larger Yb³⁺: ²F_5/2→Ho³⁺: ⁵I₆ energy‐transfer coefficient (8.55×10^?17 cm³ s^?1) compared to that (4.63×10^?17 cm³ s^?1) in Y₂O₃, indicating that CaSc₂O₄:Ho³⁺/Yb³⁺ is an excellent oxide upconverting material for achieving intense UCL.     

Investigation on the upconversion luminescence of Sr3AlO4F:Yb3+, Er3+, Ho3+ phosphors

To develop new emission-tunable upconversion (UC) phosphors, the Sr₃AlO₄F:5%Yb³⁺, xEr³⁺, yHo³⁺ (0 ≤ x ≤ 1%, 0 ≤ y ≤ 1%) samples were prepared by conversional solid-state reaction method, and their luminescence properties upon 980 nm excitation were studied. Upon 980 nm excitation, Yb³⁺-Er³⁺ codoped Sr₃AlO₄F shows a predominant emission peak between 645 and 700 nm which is attributed to the ⁴F_9/2-⁴I_15/2 transition of Er³⁺, and the Er³⁺ green emissions have been almost quenched. In this case, the yellowish green emitting light is obtained. The possible reason was interpreted by the energy level diagram and the proposed UC mechanism. For Yb³⁺-Ho³⁺ codoped Sr₃AlO₄F, three emissions are observed obviously which are all derived from the Ho³⁺ ion. The corresponding chromaticity coordinates indicate a red emission has been gained. To realize the tunable emission, the typical Sr₃AlO₄F:5%Yb³⁺, 0.2%Er³⁺, 1%Ho³⁺ phosphor was developed, and its emission spectrum includes the emission peaks of both Er³⁺ and Ho³⁺. Correspondingly, the sample gives a yellow emission.     

Infrared‐to‐Visible Light Conversion in Er3+–Yb3+:Lu3Ga5O12 Nanogarnets

Er³⁺–Yb³⁺ co‐doped Lu₃Ga₅O₁₂ nanogarnets were prepared and characterized; their structural and luminescence properties were determined as a function of the Yb³⁺ concentration. The morphology of the nanogarnets was studied by HRTEM. Under 488 nm excitation, the nanogarnets emit green, red, and near‐infrared light. The decay curves for the (⁴S_3/2, ²H_11/2) and ⁴F_9/2 levels of the Er³⁺ions exhibit a non‐exponential nature under resonant laser excitation and their effective lifetimes are found to decrease with an increase in the Yb³⁺ concentration from 1.0 to 10.0 mol %. The non‐exponential decay curves are well fitted to the Inokuti–Hirayama model for S=8, indicating that the mechanism of interaction for energy transfer between the optically active ions is of dipole–quadrupole type. Upon 976 nm laser excitation, an intense green upconverted emission is clearly observed by the naked eyes. A significant enhancement of the red‐to‐green intensity ratio of Er³⁺ ions was observed with an increase in Yb³⁺ concentration. The power dependence and the dynamics of the upconverted emission confirm the existence of two‐photon upconversion processes for the green and red emissions.     

Synthesis,characterization, and in vitro toxicity evaluation of upconversion luminescence NaLuF4:Yb3+/Tm3+ nanoparticles suitable for medical applications

Synthesis, characterization, and in vitro toxicity evaluation of upconversion luminescence NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles (UCLNPs) are reported in the current study. Initially, the synthesized lanthanide trifluoroacetate (Ln(OOCCF₃)₃) precursor was used to fabricate NaLuF₄ nanoparticles doped with Yb³⁺ and Tm³⁺ metal ions. The nanoparticles were coated with calcium carbonate (CaCO₃) after removing the hydrophobic species on them to enhance their biocompatibility. The in vitro methylthiazolyldiphenyl-tetrazoliumbromide (MTT) test was used to evaluate the toxicity of synthesized NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles (NLF-5) on L929 mouse fibroblast cell lines. The transmission electron microscopy image showed that the particle size of NaLuF₄:Yb³⁺/Tm³⁺ was 32 nm. The synthesized NLF-5 nanoparticles have both α-cubic and β-hexagonal crystalline structures that provided a superb near-infrared-to-near-infrared upconversion luminescence signal when excited at 980 nm. MTT test results show that the death of L929 fibroblast cells was observed only at concentrations above 250 μg/mL of NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles. In addition, with an increase in patrol time of 24, 48, and 72 hr, cell toxicity increased significantly, while the coated nanoparticles did not have any toxic effects. The synthesized nanoparticles could be used as a suitable material for medical applications due to their small particle size, high photoluminescence emission intensity, and low toxicity.     

Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

Nd3+/Yb3+离子共掺的氧化钛基上转换发光玻璃的热学和力学性能

利用气悬浮无容器技术制备出了Nd³⁺/Yb³⁺稀土离子共掺杂的TiO₂-La₂O₃-ZrO₂(TLZ)发光玻璃. 利用差热分析(DTA)技术研究了该类新型稀土掺杂TiO₂基上转换发光玻璃的热稳定性,主要包括玻璃化转变温度、析晶起始温度以及析晶峰值温度. 并采用两种热分析动力学计算方法得到TLZ玻璃的析晶活化能值和指前因子.本文还研究了TLZ 发光玻璃的力学性能,发现其维氏硬度大小为7.50 GPa,断裂韧性大于1.20 MPa·m^1/2. 此外,还对TLZ玻璃在808 nm激光激发下的上转换发光性能进行了研究,实验结果显示光谱中有三个强发射谱峰. 优异的上转换发光性能以及良好的热稳定性和机械性能表明,这类新材料在上转换器件的实际应用中具有很大的潜力.     

An efficient upconversion luminescence energy transfer system for determination of trace amounts of nitrite based on NaYF4:Yb3+, Er3+ as donor

Based on NaYF₄:Yb³⁺, Er³⁺ upconversion nanocrystals as donor and 4-((4-(2-aminoethylamino)naphthalen-1-yl)diazenyl) benzenesulfonic acid dihydrochloride (ANDBS) as acceptor, an efficient luminescence energy transfer (LET) system was developed for selective and sensitive determination of trace amounts of nitrite. Based on Griess Reaction, ANDBS was generated by the quantitative reaction of nitrite, sulfanilamide and N-(1-naphtyl)-ethylenediamine dihydrochloride (N1NED). The degree of the overlaps between the emission spectrum of NaYF₄:Yb³⁺, Er³⁺ and the absorption spectrum of ANDBS were effective for luminescence energy transfer. Under the optimal condition, the upconversion luminescence quenching of NaYF₄:Yb³⁺, Er³⁺ was in proportion to the trace amounts of nitrite. The detection limit for nitrite achieved is 0.0046 μg mL^?1 and the system shows high sensitivity towards nitrite at 0.008000–0.2500 μg mL^?1 range.     

Synthesis and surface modification of ultrasmall monodisperse NaYF4:Yb3+/Tm3+ upconversion nanoparticles

The emerging upconversion nanoparticles (UCNP) have gained substantial consideration in the field of bioanalytical as well as diagnostic applications. Therefore, great progress has been made in the synthesis and surface modification of luminescent UCNPs over the last two decades. In this paper, we have reported monodispersed and high luminescent upconversion nanoparticles NaYF₄: 20%Yb³⁺, 2%Tm³⁺ have been synthesized using a solvothermal method, followed by a coating of the NaYF₄ shell with a thin layer of SiO₂ on the surface to afford the core-shell NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles (NP@SiO₂). The prepared nanoparticles were of strong upconversion fluorescent emission intensity, hexagonal phase, and with an average size of about 8 ± 1 nm, which have been characterized by luminescence spectroscopy, powder X-ray diffraction (P-XRD), Dynamic light scattering (DLS), and Transmission electron microscopy (TEM). The results indicate that the NP@SiO₂ can be used for the conjugation of fluorescent probes for various biomolecules and can find applications in cancer cell imaging and disease diagnosis.     

Studies of structure,dielectric and conduction mechanism of Bi3+/Yb3+ modified BaTiO3

The present communication aims at the study of the structural, dielectric, electrical and conduction properties of Bi³⁺/Yb³⁺ substituted BaTiO₃ with a chemical composition of Ba_0.5Bi_0.5Yb_0.5Ti_0.5O₃. The modified BaTiO₃, could be synthesized by a solid state reaction technique. The X-ray diffraction data and pattern revealed the formation of the above compound with tetragonal crystal system. The material's molecular structure (Ba–Ti–O bond, O–Ti–O stretching-mode, metal-oxygen bond, optical band gap, and so on) was determined using room temperature Fourier transform infrared (FTIR) and UV–visible spectroscopic spectra. Detailed investigations of the material's electrical (dielectric/leakage current and impedance) behavior over a wide temperature (25⁰C–500⁰C) and frequency (1 kHz–1000 kHz) range revealed the presence of capacitive, resistive, and conductive mechanisms. On the investigation of the polarization-electric field (P-E) hysteresis loop on multiple substitution, the change of ferroelectric polarization (spontaneous and residual) and storage density of BaTiO₃ was observed. Defect chemistry of the modified barium compound has been discussed in the details.     

Host-sensitized phosphorescence of Mn4+, Eu3+, and Yb3+ in MgAl2Si2O8

Mn⁴⁺ doped and Eu³⁺, Yb³⁺ co-doped MgAl₂Si₂O₈-based phosphors were prepared by conventional solid state reaction at 1,300?°C. They were characterized by thermogravimetry, differential thermal analysis, X-ray powder diffraction, photoluminescence, and scanning electron microscopy. The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 600?C715?nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the intrinsic ² E????⁴ A ₂ transitions of Mn⁴⁺.     

Confining Excitation Energy in Er3+‐Sensitized Upconversion Nanocrystals through Tm3+‐Mediated Transient Energy Trapping

A new class of lanthanide‐doped upconversion nanoparticles are presented that are without Yb³⁺ or Nd³⁺ sensitizers in the host lattice. In erbium‐enriched core–shell NaErF₄:Tm (0.5 mol %)@NaYF₄ nanoparticles, a high degree of energy migration between Er³⁺ ions occurs to suppress the effect of concentration quenching upon surface coating. Unlike the conventional Yb³⁺‐Er³⁺ system, the Er³⁺ ion can serve as both the sensitizer and activator to enable an effective upconversion process. Importantly, an appropriate doping of Tm³⁺ has been demonstrated to further enhance upconversion luminescence through energy trapping. This endows the resultant nanoparticles with bright red (about 700‐fold enhancement) and near‐infrared luminescence that is achievable under multiple excitation wavelengths. This is a fundamental new pathway to mitigate the concentration quenching effect, thus offering a convenient method for red‐emitting upconversion nanoprobes for biological applications.     

Preparation and up-conversion fluorescence of rare earth (Er or Yb/Er)-doped TiO2 nanobelts

Anatase TiO₂ nanobelts doped with rare earth (RE) ions Yb³⁺, Er³⁺ or Yb³⁺/Er³⁺ have been prepared using layered titanate nanobelts (LTO NBs) with RE ions as the precursor obtained by ion-exchange between LTO NBs and RE ions under hydrothermal process. Various measurement results demonstrate that the RE ions have doped into the lattice of TiO₂, and the Er³⁺ or Yb³⁺/Er³⁺ doped nanobelts show strong visible up-conversion (UC) fluorescence under 980 nm excitation. The UC emission intensity of LTO NBs embedded with Er³⁺ or Yb³⁺/Er³⁺ is slightly higher than that of the corresponding TiO₂ nanobelts doped with RE ions, whereas higher RE doping content leads to the decrease of UC emission intensity due to the concentration-quenching effect.     

Multimode Luminescence Tailoring and Improvement of Cs2NaHoCl6 Cryolite Crystals via Sb3+/Yb3+ Alloying for Versatile Photoelectric Applications

Lead-free halide double perovskites are currently gaining significant attention owing to their exceptional environmental friendliness, structural adjustability as well as self-trapped exciton emission. However, stable and efficient double perovskite with multimode luminescence and tunable spectra are still urgently needed for multifunctional photoelectric application. Herein, holmium based cryolite materials (Cs₂NaHoCl₆) with anti-thermal quenching and multimode photoluminescence were successfully synthesized. By the further alloying of Sb³⁺ (s-p transitions) and Yb³⁺ (f-f transitions) ions, its luminescence properties can be well modulated, originating from tailoring band gap structure and enriching electron transition channels. Upon Sb³⁺ substitution in Cs₂NaHoCl₆, additional absorption peaking at 334 nm results in the tremendous increase of photoluminescence quantum yield (PLQY). Meanwhile, not only the typical NIR emission around 980 nm of Ho³⁺ is enhanced, but also the red and NIR emissions show a diverse range of anti-thermal quenching photoluminescence behaviors. Furthermore, through designing Yb³⁺ doping, the up-conversion photoluminescence can be triggered by changing excitation laser power density (yellow-to-orange) and Yb³⁺ doping concentration (red-to-green). Through a combined experimental-theoretical approach, the related luminescence mechanism is revealed. In general, by alloying Sb³⁺/Yb³⁺ in Cs₂NaHoCl₆, abundant energy level ladders are constructed and more luminescence modes are derived, demonstrating great potential in multifunctional photoelectric applications.     

BaTiO3:Sm3+ nanophosphor with K+ ion incorporation for modulating non-radiative transitions

Rare earth (RE) activated nanophosphors are the prime elements employed to manufacture light emitting diodes (LEDs) for the current solid state lighting (SSL) industry. The apparent lack of reddish orange emitting nanophosphors is proving to a constraint in the commercialization of the white light emitting diodes (WLEDs). Herein, the size of BaTiO₃ (BTO): Sm³⁺ and K⁺ co-activated BTO: Sm³⁺ nanophosphor, with an average particle size of 80 nm, have been produced by a modified sol gel technique. The synthesized nanophosphors emit a brilliant reddish-orange light when excited at 406 nm. The relative photoluminescence (PL) studies of Sm³⁺ doped BTO and Sm³⁺ doped BTO with K⁺ nanophosphor show that adding K⁺ doubles the intensity of the emitted light and improves the thermal stability in a significant way. The results of the research indicated that using the aforementioned nanophosphor in the future may be advantageous for solid-state lighting systems, including warm LEDs with cyan light chips.