A Series of New Eu/Tb Mixed MOFs with Tunable Color Luminescence

Two isostructural lanthanide metal‐organic frameworks [Ln‐MOFs, Ln = Tb ( 1 ), Eu ( 8 )] containing oxalic acid ligand with green, red luminescence were solvothermally synthesized. A series of Eu/Tb mixed MOFs ( 2 – 7 ), (C₅H₆N)₂[Eu_xTb_2–x(H₂O)₂(C₂O₄)₄] · 2H₂O, were designed and obtained, which displayed highly tunable luminescence color by adjusting the excitation wavelength. Complexes 1 – 8 were characterized by IR, elemental analysis, ICP, powder XRD, and TG measurements. The quantum yields of the complexes 1 – 8 range from 6.89 to 4.15 %, whereas the fluorescence lifetime of 1 – 8 varies between 1.12 and 0.87 ms. Therefore, with the increase of the molar ratio of Eu, the quantum yields and fluorescence lifetime of the complexes 1 – 8 gradually decrease.     

Photoluminescence Properties of Lanthanide‐Organic Frameworks (LnOFs) with Thiophene‐2,5‐Dicarboxylate and Acetate

S‐heterocyclic dicarboxylic acid, thiophene‐2,5‐dicarboxylic acid (H₂TDC), was employed to construct a series of lanthanide‐organic frameworks (LnOFs) with coligand acetate, formulated as [Ln(TDC)(OAc)(H₂O)]_n [Ln = Eu ( 1 ), Tb ( 2 ), Gd ( 3 ), Dy ( 4 ), Sm ( 5 )] under hydrothermal conditions. Structure analysis reveals that 1 – 5 have dinuclear 3D metal organic frameworks (MOFs), in which TDC^2– and OAc^– display (κ¹‐κ¹)‐(κ¹–κ¹)‐μ₄ and (κ²‐κ¹)‐μ₂ coordination fashions, respectively. The dehydrated products of all compounds show high thermal stability above 410 °C. As for 1 , 2 , 4 , and 5 , the photoluminescence analyses exhibit characteristic luminescence emission bands of the corresponding lanthanide ions in the visible region. In particular, compound 2 displays bright green luminescence in the solid state with ⁵D₄ lifetime of 0.510 ms and relative high overall quantum yield of 16 %, based on an ideal energy gap between the lowest triplet state energy level of H₂TDC ligand and the ⁵D₄ state energy level of Tb³⁺. The energy transfer mechanisms in compounds 1 and 2 were also discussed.     

Systematic Investigation of High‐Sensitivity Luminescent Sensing for Polyoxometalates and Iron(III) by MOFs Assembled with a New Resorcin[4]arene‐Functionalized Tetracarboxylate

A new family of resorcin[4]arene‐based metal–organic frameworks (MOFs), namely, [Eu(HL)(DMF)(H₂O)₂] ? 3 H₂O ( 1 ), [Tb(HL)(DMF)(H₂O)₂] 3 H₂O ( 2 ), [Cd₄(L)₂(DMF)₄(H₂O)₂] 3 H₂O ( 3 ) and [Zn₃(HL)₂(H₂O)₂] 2 DMF ? 7 H₂O ( 4 ), have been constructed from a new resorcin[4]arene‐functionalized tetracarboxylic acid (H₄L=2,8,14,20‐tetra‐ethyl‐6,12,18,24‐tetra‐methoxy‐4,10,16,22‐tetra‐carboxy‐methoxy‐calix[4]arene). Isostructural 1 and 2 exhibit charming 1D motifs built with the cup‐like HL^3? anions and rare earth cations. Compounds 3 and 4 show a unique sandwich‐based 2D layer and a fascinating 3D framework, respectively. Remarkably, compounds 1 and 2 display intensive red and green emissions triggered by the efficient antenna effect of organic ligands under UV light. More importantly, systematic luminescence studies demonstrate that Ln‐MOFs 1 and 2 , as efficient multifunctional fluorescent materials, show highly selective and sensitive sensing of Fe³⁺, polyoxometalates (POMs), and acetone, which represents a rare example of a sensor for quantitatively detecting three different types of analytes. This is also an exceedingly rare example of Fe³⁺ and POMs detection in aqueous solutions employing resorcin[4]arene‐based luminescent Ln‐MOFs. Furthermore, the possible mechanism of the sensing properties is deduced.     

Synthesis,Structures, and Properties of Four Novel Coordination Compounds based on a Flexible Tetrakis(imidazol‐1‐ylmethyl)methane Ligand

Four coordination polymers, namely, [Zn₂(TIYM)(2,6‐PYDC)₂]_n · n(CH₃OH) · 3n(H₂O) ( 1 ), [Cu(TIYM)(2,6‐PYDC)]_n · 3n(H₂O) ( 2 ), [Co(TIYM)(2,6‐PYDC)]_n · n(CH₃OH) · 3n(H₂O) ( 3 ), and [Cd₂(TIYM)(2,6‐PYDC)₂(H₂O)]_n · n(H₂O) ( 4 ) with the flexible N‐containing ligand [tetrakis(imidazol‐1‐ylmethyl)methane (TIYM)] and the N‐containing dicarboxylic acid [2,6‐pyridinedicarboxylic acid (2,6‐PYDC)] were prepared. Compounds 1 – 4 show various structures because of different N–C_center–N angles (θ) of TIYM ligands and changing coordination modes of 2,6‐PYDC. Compounds 1 , 2 , and 3 display a similar 1D ladder‐like chain, whereas 4 gives a 1D quad‐core lifting platform shaped belt. The structural diversities in 1 – 4 suggest that the multiple coordination modes or the different freely twist angles of ligands and the presence of different metal atoms play important roles in the resulting structures of the coordination polymers. Furthermore, the solid‐state luminescence properties of 1 and 4 , and the magnetic properties of 3 were investigated.     

Three‐Dimensional MOF‐Type Architectures with Tetravalent Uranium Hexanuclear Motifs (U6O8)

Four metal–organic frameworks (MOF) with tetravalent uranium have been solvothermally synthesized by treating UCl₄ with rigid dicarboxylate linkers in N,N‐dimethylfomamide (DMF). The use of the ditopic ligands 4,4′‐biphenyldicarboxylate ( 1 ), 2,6‐naphthalenedicarboxylate ( 2 ), terephthalate ( 3 ), and fumarate ( 4 ) resulted in the formation of three‐dimensional networks based on the hexanuclear uranium‐centered motif [U₆O₄(OH)₄(H₂O)₆]. This motif corresponds to an octahedral configuration of uranium nodes and is also known for thorium in crystalline solids. The atomic arrangement of this specific building unit with organic linkers is similar to that found in the zirconium‐based porous compounds of the UiO‐66/67 series. The structure of [U₆O₄(OH)₄(H₂O)₆(L)₆] ? X (L=dicarboxylate ligand; X=DMF) shows the inorganic hexamers connected in a face‐centered cubic manner through the ditopic linkers to build up a three‐dimensional framework that delimits octahedral (from 5.4 Å for 4 up to 14.0 Å for 1 ) and tetrahedral cavities. The four compounds have been characterized by using single‐crystal X‐ray diffraction analysis (or powder diffraction analysis for 4 ). The tetravalent state of uranium has been examined by using XPS and solid‐state UV/Vis analyses. The measurement of the Brunauer–Emmett–Teller surface area indicated very low values (Langmuir <300 m² g^?1 for 1 , <7 m² g^?1 for 2 – 4 ) and showed that the structures are quite unstable upon removal of the encapsulated DMF solvent.     

Stimuli-Responsive Luminescent Properties of Tetraphenylethene-Based Strontium and Cobalt Metal–Organic Frameworks

Herein we report two new TPE-based 3D MOFs, that is, Sr-ETTB and Co-ETTB (TPE=Tetraphenylethylene, H₈ETTB=4′,4′′′,4′′′′′,4′′′′′′′-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1′-biphenyl]-3,5-dicarboxylic acid))). Through tailoring outer shell electron configurations of Sr^II and Co^II cations, the fluorescence intensity of the MOFs is tuned from high emission to complete non-emission. Sr-ETTB with strong blue fluorescence shows reversible fluorescence variations in response to pressure and temperature, which is directly related to the reversible deformation of the crystal structure. In addition, non-emissive Co-ETTB counterpart exhibits a turn-on fluorescent enhancement under the stimulation of analyte histidine. In the process, TPE-cored linkers in the MOFs are released through competitive coordination substitution and subsequently reassembled to perform aggregation-induced luminescence behavior originated from the organic linkers.     

Syntheses,Structures, and Photoluminescence of Lanthanide Coordination Polymers Based on 4‐Oxo‐1,4‐dihydro‐2,6‐pyridinedicarboxylic acid

Investigating the coordination chemistry of H₂CDA (4‐oxo‐1,4‐dihydro‐2,6‐pyridinedicarboxylic acid) with rare earth salts Ln(NO₃)₃ under hydrothermal conditions, structure transformation phenomenon was observed. The ligand, H₂CDA charged to its position isomer, enol type structure, H₃CAM (4‐hydroxypyridine‐2,6‐dicarboxylic acid). Six new lanthanide(III) coordination polymers with the formulas [Ln(CAM)(H₂O)₃]_n [Ln = La ( 1 ), Pr, ( 2 )] and {[Ln(CAM)(H₂O)₃] · H₂O}_n [Ln = Nd, ( 3 ), Sm, ( 4 ), Eu, ( 5 ), Y, ( 6 )] were synthesized and characterized. The X‐ray structure analyses show two kinds of coordination structures. The complexes 1 and 2 and 3 – 6 are isostructural. Complexes 1 and 2 crystallize in the monoclinic C₂/c space group, whereas 3 – 6 crystallize in the monoclinic system with space group P2₁/n. In the two kinds of structures, H₃CAM displays two different coordination modes. The Sm^III and Eu^III complexes exhibit the corresponding characteristic luminescence in the visible region at an excitation of 376 nm.     

Luminescence Tuning and White‐Light Emission of Co‐doped Ln–Cd–Organic Frameworks

Four new three‐dimensional isostructural lanthanide–cadmium metal–organic frameworks (Ln–Cd MOFs), [LnCd₂(imdc)₂(Ac)(H₂O)₂]?H₂O (Ln=Pr ( 1 ), Eu ( 2 ), Gd ( 3 ), and Tb ( 4 ); H₃imdc=4,5‐imidazoledicarboxylic acid; Ac=acetate), have been synthesized under hydrothermal conditions and characterized by IR, elemental analyses, inductively coupled plasma (ICP) analysis, and X‐ray diffraction. Single‐crystal X‐ray diffraction shows that two Ln^III ions are surrounded by four Cd^II ions to form a heteronuclear building block. The blocks are further linked to form 3D Ln–Cd MOFs by the bridging imdc^3? ligand. Furthermore, the left‐ and right‐handed helices array alternatively in the lattice. Eu–Cd and Tb–Cd MOFs can emit characteristic red light with the Eu^III ion and green light with the Tb^III ion, respectively, while both Gd–Cd and Pr–Cd MOFs generate blue emission when they are excited. Different concentrations of Eu³⁺ and Tb³⁺ ions were co‐doped into Gd–Cd/Pr–Cd MOFs, and tunable luminescence from yellow to white was achieved. White‐light emission was obtained successfully by adjusting the excitation wavelength or the co‐doping ratio of the co‐doped Gd–Cd and Pr–Cd MOFs. These results show that the relative emission intensity of white light for Gd–Cd:Eu³⁺,Tb³⁺ MOFs is stronger than that of Pr–Cd:Eu³⁺,Tb³⁺ MOFs, which implies that the Gd complex is a better matrix than the Pr complex to obtain white‐light emission materials.     

Pore‐Environment Engineering with Multiple Metal Sites in Rare‐Earth Porphyrinic Metal–Organic Frameworks

Multi‐component metal–organic frameworks (MOFs) with precisely controlled pore environments are highly desired owing to their potential applications in gas adsorption, separation, cooperative catalysis, and biomimetics. A series of multi‐component MOFs, namely PCN‐900(RE), were constructed from a combination of tetratopic porphyrinic linkers, linear linkers, and rare‐earth hexanuclear clusters (RE₆) under the guidance of thermodynamics. These MOFs exhibit high surface areas (up to 2523 cm² g^?1) and unlimited tunability by modification of metal nodes and/or linker components. Post‐synthetic exchange of linear linkers and metalation of two organic linkers were realized, allowing the incorporation of a wide range of functional moieties. Two different metal sites were sequentially placed on the linear linker and the tetratopic porphyrinic linker, respectively, giving rise to an ideal platform for heterogeneous catalysis.     

Cycloheptyl‐fused NNO‐ligands as electronically modifiable supports for M(II) (M = Co,Fe) chloride precatalysts; probing performance in ethylene oligo‐/polymerization

The N,N,O‐cobalt(II), [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]CoCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Co1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Co2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Co3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Co4 ) and N,N,O‐iron(II) complexes, [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]FeCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Fe1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Fe2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Fe3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Fe4 ), each containing one sterically enhanced but electronically modifiable N‐2,6‐dibenzhydryl‐4‐R²‐phenyl group, have been prepared by a one‐pot template approach using α,α′‐dioxo‐2,3:5,6‐bis(pentamethylene)pyridine, the corresponding aniline along with the respective cobalt or iron salt in acetic acid. Distorted square pyramidal geometries are a feature of the molecular structures of Co1 – Co4 . Upon activation with MAO or MMAO, Co1 – Co4 show good activities (up to 2.2 × 10⁵ g mol^?1(Co) h^?1) affording short chain oligomers (C₄–C₃₀) with good α‐olefin selectivity. By contrast, Fe1 – Fe4 , in the presence of MMAO, displayed moderate activities (up 10.9 × 10⁴ g(PE) mol^?1(Fe) h^?1) for ethylene polymerization forming low‐molecular‐weight linear polymers (up to 13.0 kg mol^?1) incorporating saturated n‐propyl and i‐butyl chain ends. For both cobalt and iron, the precatalysts incorporating the more electron withdrawing 4‐R²‐substituents [Cl ( Co3 / Fe3 ), F ( Co4 / Fe4 )] deliver the best catalytic activities, while with cobalt, these types of substituents additionally broaden the oligomeric distribution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3980–3989     

A Series of Multifunctional Metal–Organic Frameworks Showing Excellent Luminescent Sensing,Sensitization, and Adsorbent Abilities

A series of highly luminescent‐active metal–organic frameworks (MOFs) 1 – 3 with hierarchical pores have been rationally constructed and fully characterized. The predesigned semi‐rigid hexacarboxylate ligand hexa[4‐(carboxyphenyl)oxamethyl]‐3‐oxapentane acid (H₆L) has been adapted with various space‐directed N donors (i.e., 2,2’‐bipyridine, 4,4′‐di(1H‐imidazol‐1‐yl)‐1,1′‐biphenyl, and 1,3,5‐tri(1H‐imidazol‐1‐yl)benzene) from a bidentate V‐shape to a tridentate Y‐shape. This family of multifunctional MOF materials represents a variety of potential applications in the following aspects: first, as luminescent sensors that show a fast and sensitive detection for pollutant CrO₄^2? and Cr₂O₇^2? ions in aqueous media; second, as adsorbents that can rapidly remove harmful organic dyes; third, as an antenna that can effectively sensitize visible‐light‐emitting Tb³⁺ ions. These multifunctional MOF materials combine optical‐sensing, adsorption, and sensitization properties, thus are very useful in many potential applications. Furthermore, these materials have proved to be reusable.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

The Series of Rare Earth Complexes [Ln2Cl6(μ‐4,4′‐bipy)(py)6], Ln=Y,Pr, Nd,Sm‐Yb: A Molecular Model System for Luminescence Properties in MOFs Based on LnCl3 and 4,4′‐Bipyridine

A series of 12 dinuclear complexes [Ln₂Cl₆(μ‐4,4′‐bipy)(py)₆], Ln=Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, ( 1 – 12 , respectively) was synthesized by an anhydrous solvothermal reaction in pyridine. The complexes contain a 4,4′‐bipyridine bridge and exhibit a coordination sphere closely related to luminescent lanthanide MOFs based on LnCl₃ and 4,4‐bipyridine. The dinuclear complexes therefore function as a molecular model system to provide a better understanding of the luminescence mechanisms in the Ln‐N‐MOFs ${\hbox{}{{\hfill 2\atop \hfill \infty }}}$ [Ln₂Cl₆(4,4′‐bipy)₃] ? 2(4,4′‐bipy). Accordingly, the luminescence properties of the complexes with Ln=Y, Sm, Eu, Gd, Tb, Dy, ( 1 , 4 – 8 ) were determined, showing an antenna effect through a ligand–metal energy transfer. The highest efficiency of luminescence is observed for the terbium‐based compound 7 displaying a high quantum yield (QY of 86 %). Excitation with UV light reveals typical emission colors of lanthanide‐dependent intra 4f–4f‐transition emissions in the visible range (Tb^III: green, Eu^III: red, Sm^III: salmon red, Dy^III: yellow). For the Gd^III‐ and Y^III‐containing compounds 6 and 1 , blue emission based on triplet phosphorescence is observed. Furthermore, ligand‐to‐metal charge‐transfer (LMCT) states, based on the interaction of Cl^? with Eu^III, were observed for the Eu^III compound 5 including energy‐transfer processes to the Eu^III ion. Altogether, the model complexes give further insights into the luminescence of the related MOFs, for example, rationalization of Ln‐independent quantum yields in the related MOFs.     

Investigation of the effect of the N‐oxidation process on the interaction of selected pyridine compounds with biomacromolecules: structural,spectral, theoretical and docking studies

Two new N‐oxide compounds, namely glycinium 2‐carboxy‐1‐(λ¹‐oxidaneyl)‐1λ⁴‐pyridine‐6‐carboxylate–glycine–water (1/1/1), C₂H₆NO₂⁺·C₇H₄NO₅^?·C₂H₅NO₂·H₂O or [(2,6‐HpydcO)(HGLY)(GLY)(H₂O)], 1 , and methyl 6‐carboxy‐1‐(λ¹‐oxidaneyl)‐1λ⁴‐pyridine‐2‐carboxylate, C₈H₇NO₅ or 2,6‐HMepydcO, 2 , were prepared and identified by elemental analysis, FT–IR, Raman spectroscopy and single‐crystal X‐ray diffraction. The X‐ray analysis of 1 revealed an ionic compound containing a 2,6‐HpydcO^? anion, a glycinium cation, a neutral glycine molecule and a water molecule. Compound 2 is a neutral compound with two independent units in its crystal structure. In addition to the hydrogen bonds, the crystal network is stabilized by π–π stacking interactions of the types pyridine–carboxylate and carboxylate–carboxylate. The thermodynamic stability and charge‐distribution patterns for isolated molecules of 2,6‐H₂pydcO and 2,6‐HMepydcO, and their two similar derivatives, pyridine‐2,6‐dicarboxylic acid (2,6‐H₂pydc) and dimethyl 1‐(λ¹‐oxidaneyl)‐1λ⁴‐pyridine‐2,6‐dicarboxylate (2,6‐Me₂pydcO), were studied by density functional theory (DFT) and natural bond orbital (NBO) analysis, respectively. The ability of these compounds and their analogues to interact with nine selected biomacromolecules (BRAF kinase, CatB, DNA gyrase, HDAC7, rHA, RNR, TrxR, TS and Top II) was investigated using docking calculations.     

Optically active derivatives of terephthalic acid: four crystal structures from two powder patterns

A novel important class of nanoporous crystalline solids, metal–organic frameworks (MOFs), composed of organic ligands (linkers) and metal ions, is now considered as a platform for the development of various functional hybrid materials. In order to design new MOF‐based asymmetric catalysts, two terephthalic acid derivatives, namely 2‐{[1‐(1‐tert‐butoxycarbonyl)‐l ‐prolyl]amino}terephthalic acid, C₁₈H₂₂N₂O₇, (1), and 2‐(l ‐prolylamino)terephthalic acid, C₁₃H₁₄N₂O₅, (2), which could find potential applications as chiral linkers for the construction of enantioselective MOFs, were synthesized and their powder samples were measured at synchrotron station ID22 (ESRF). Each sample contained two unknown crystalline phases, so four new crystal structures were determined, namely, the 2.24‐hydrate of (1), (1a) (space group C222₁), and the 2.08‐hydrate of (1), (1b) (P222₁), which are crystallohydrates, and two polymorphs of (2), i.e. (2a) (C222₁) and (2b) (P2₁2₁2₁), and were validated with DFT‐d (dispersion‐corrected density functional theory) optimizations.     

Hydrosilylation Induced by N→Si Intramolecular Coordination: Spontaneous Transformation of Organosilanes into 1‐Aza‐Silole‐Type Molecules in the Absence of a Catalyst

Our attempts to synthesize the N→Si intramolecularly coordinated organosilanes Ph₂L¹SiH ( 1 a ), PhL¹SiH₂ ( 2 a ), Ph₂L²SiH ( 3 a ), and PhL²SiH₂ ( 4 a ) containing a CH?N imine group (in which L¹ is the C,N‐chelating ligand {2‐[CH?N(C₆H₃‐2,6‐iPr₂)]C₆H₄}^? and L² is {2‐[CH?N(tBu)]C₆H₄}^?) yielded 1‐[2,6‐bis(diisopropyl)phenyl]‐2,2‐diphenyl‐1‐aza‐silole ( 1 ), 1‐[2,6‐bis(diisopropyl)phenyl]‐2‐phenyl‐2‐hydrido‐1‐aza‐silole ( 2 ), 1‐tert‐butyl‐2,2‐diphenyl‐1‐aza‐silole ( 3 ), and 1‐tert‐butyl‐2‐phenyl‐2‐hydrido‐1‐aza‐silole ( 4 ), respectively. Isolated organosilicon amides 1 – 4 are an outcome of the spontaneous hydrosilylation of the CH?N imine moiety induced by N→Si intramolecular coordination. Compounds 1–4 were characterized by NMR spectroscopy and X‐ray diffraction analysis. The geometries of organosilanes 1 a – 4 a and their corresponding hydrosilylated products 1 – 4 were optimized and fully characterized at the B3LYP/6‐31++G(d,p) level of theory. The molecular structure determination of 1 – 3 suggested the presence of a Si?N double bond. Natural bond orbital (NBO) analysis, however, shows a very strong donor–acceptor interaction between the lone pair of the nitrogen atom and the formal empty p orbital on the silicon and therefore, the calculations show that the Si?N bond is highly polarized pointing to a predominantly zwitterionic Si⁺N^? bond in 1 – 4 . Since compounds 1 – 4 are hydrosilylated products of 1 a – 4 a , the free energies (ΔG₂₉₈), enthalpies (ΔH₂₉₈), and entropies (ΔH₂₉₈) were computed for the hydrosilylation reaction of 1 a – 4 a with both B3LYP and B3LYP‐D methods. On the basis of the very negative ΔG₂₉₈ values, the hydrosilylation reaction is highly exergonic and compounds 1 a – 4 a are spontaneously transformed into 1 – 4 in the absence of a catalyst.     

Anthraquinone‐2,6‐disulfonate as Versatile Ligand for the Synthesis of Hydrogen‐Bonded Supramolecules

The reactions of anthraquinone‐2,6‐disulfonic acid disodium salt (Na₂a‐2,6‐dad) with Cu^II, Mn^II, and Zn^II with 1,10‐phenanthroline (phen) or 2,2′‐dipyridyl (bipy) under hydrothermal conditions formed two or three‐dimensional supramolecules of stoichiometries [Cu(a‐2,6‐dad)(phen)(H₂O)₃](H₂O)₄ ( 1 ), [Mn(a‐2,6‐dad)(bipy)₂(H₂O)](H₂O)₂ ( 2 ), and [Zn(a‐2,6‐dad)(bipy)₂(H₂O)](H₂O)₂ ( 3 ), which were synthesized and characterized. The arrangement around each metal atom is distorted octahedral. The ligands in all the compounds are engaged in intermolecular hydrogen bonding leading to the formation of hydrogen‐bonded networks, the compounds show novel π–π stacking interactions. Photoluminescence measurements indicate that the compound [Zn(a‐2,6‐dad)(bipy)₂(H₂O)](H₂O)₂ ( 3 ) shows strong blue luminescence in the solid state at room temperature.     

Syntheses,Structures, Magnetic Properties,and NIR Emission Properties of a Series of Novel 1, 2, 4, 5‐Cyclohexanetetracarboxylate‐bridged Lanthanide Complexes with 3D Framework Structures

Solvothermal combination of trivalent lanthanide metal precursors with 1, 2, 4, 5‐cyclohexanetetracarboxylic acid (L) ligand has afforded the preparation of a family of eight new coordination polymers [Ln₄(L)₃(H₂O)₁₀] · 7H₂O (Ln = Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb) ( 1 – 8 ). Structural analyses reveal that the 1, 2, 4, 5‐cyclohexanetetracarboxylic acid ligand with e,a,a,e (L^I) conformation displays a μ₄‐(κ³O, O, O⁵)(κ²O²,O²)(κ²O⁴,O⁴)‐bridging mode to generate 3D frameworks of complexes 1 – 8 and the α‐Po topology with the short Schläfli symbol {4¹².6³} could be observed in complexes 1 – 8 . The near‐infrared luminescence properties were studied, and the results have shown that the Ho^III, Er^III, and Yb^III complexes emit typical near‐infrared luminescence in the solid‐state. Variable‐temperature magnetic susceptibility measurements of complexes 2 – 7 have shown that complex 2 (Gd) shows the ferromagnetic coupling between magnetic centers, whereas the complexes 3 – 7 show the antiferromagnetic coupling between magnetic centers. Additionally, the thermogravimetric analyses were discussed.     

Synthesis,Structure, and Photoluminescent Properties of a New 3D Metal‐Organic Framework with Unusual AgI Chains

A new 3D metal‐organic framework {[Ag₄(btc)(bix)₂] · H₂O}_n ( 1 ) [H₄btc = biphenyl‐2, 2′,4, 4′‐tetracarboxylic acid, bix = 1, 4‐bis(imidazol‐1‐ylmethyl)benzene] was synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction, infrared (IR) spectroscopy, thermal gravimetric analysis (TGA), and luminescence studies. The most remarkable structural feature of 1 is that the 1D chain and 2D network interpenetrated structures are further linked by parallel aligned 1D Ag^I chains to generate 3D metal‐organic framework.