Asymmetric Reduction of 2‐Chloro‐3‐oxo Esters by Transfer Hydrogenation

Asymmetric reduction of 2‐chloro‐3‐oxo esters was achieved by catalytic transfer hydrogenation using [RuCl₂(p‐cymene)](S,S)‐TsDPEN as the chiral catalyst and HCOOH‐Et₃N as the hydrogen source. Moderate to good yields (up to 85%) and good enantioselectivities (up to 98% ee) were obtained.     

Palladium‐catalyzed unstrained C(sp3)―N bond activation: the synthesis of N,N‐dimethylacetamide by carbonylation of trimethylamine

This work describes a highly efficient unstrained C(sp³)―N bond activation approach for synthesis of N,N‐dimethylacetamide (DMAc) via catalytic carbonylation of trimethylamine using a PdCl₂/bipy (bipy = 2,2′‐bipyridine)/Me₄NI catalyst system. A low Pd catalyst dosage (1.0 mol%) is sufficient for high selectivity (98.1%) and yield (90.8%), with a turnover number (TON) of 90.0 mmol of DMAc obtained per mmol of PdCl₂ employed under mild reaction conditions. The influence of reaction parameters such as catalyst precursor dosage, ligand type and promoter on activity is investigated. This work also discusses in detail the halide promoter's role in the reaction, and provides a plausible mechanism based on the intermediates methyl iodide and acetyl iodide. Analyses indicate that the carbonylation of trimethylamine may proceed through an active intermediate acetyl iodide formed by carbonylation of methyl iodide generated from the decomposition of the promoter Me₄NI under reaction conditions. The formation of acetyl iodide favors the cleaving efficiency of the inert unstrained C(sp³)―N bond of trimethylamine. Copyright © 2013 John Wiley & Sons, Ltd.     

Oxidation of sec‐alcohols with Ru(II)‐bearing microgel star polymer catalysts via hydrogen transfer reaction: Unique microgel‐core catalysis

Oxidation of sec‐alcohols was investigated with ruthenium‐bearing microgel core star polymer catalysts [Ru(II)‐Star]. The star polymer catalysts were directly prepared via RuCl₂(PPh₃)₃‐catalyzed living radical polymerization of methyl methacrylate (MMA), followed by the arm‐linking reaction with ethylene glycol dimethacrylate ( 1 ) in the presence of diphenylphosphinostyrene ( 2 ). The Ru(II)‐Star efficiently and homogeneously catalyzed the oxidation of 1‐phenylethanol ( S1 ) to give a corresponding ketone (acetophenone) in higher yield (92%) than the analogs of polymer‐supported ruthenium complexes. Importantly, the star catalyst afforded high recycling efficiency in the oxidation. They held catalytic activity against three times catalysis even though they were recovered under air‐exposure, whereas the conventional RuCl₂(PPh₃)₃ lost the activity for same recycling procedure due to the deactivation by oxygen. The stability of the star catalysts during the recycle experiment was confirmed by detailed spectroscopic characterization. The star polymers also catalyzed oxidation for a wide range of sec‐alcohols with aromatic and aliphatic groups. The substrate affinity was different from that with RuCl₂(PPh₃)₃, suggesting the unique selectivity caused by the specific structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Catalytic combustion of carbon particulates over perovskite-type oxides

A Cu/Cr₂O₃ catalyst was prepared by co-precipitation method, studied in methanol dehydrocoupling to methyl formate in different gas streams and characterized by BET, XRD, TPR, TPD of NH₃ and CO₂, etc. The results demonstrate that the catalyst can catalyze the dehydrocoupling of methanol to methyl formate in high efficiency,e. g. 99% selectivity to methyl formate at 48% conversion of methanol. The results further indicate that metallic copper might be the active species for the formation of methyl formate     

Syntheses and Structures of Homo‐ and Heterobimetallic Complexes Containing a (Cyclopentadienone)rhodium(I) Fragment

The reaction of [RhCl(η⁴‐Ph₂R₂C₄CO)]₂ (R=Ph, 2‐naphthyl) with the dimeric complexes [RuCl₂(p‐cymene)]₂ p‐cymene=1‐methyl‐4‐(1‐methylethyl)benzene, [RuCl₂(1,3,5‐Et₃C₆H₃)]₂, [MCl₂(Cp*)]₂ (M=Rh, Ir; Cp*=1,2,3,4,5‐pentamethylcyclopenta‐2,4‐dien‐1‐yl), [RuCl₂(CO)₃]₂, [RuCl₂(dcypb)(CO)]₂ (dcypb=butane‐1,4‐diylbis[dicyclohexylphosphine]), [(dppb)ClRu(μ‐Cl)₂(μ‐OH₂)RuCl(dppb)] (dppb=butane‐1,4‐diylbis[diphenylphosphine]), and [(dcypb)(N₂)Ru(μ‐Cl)₃RuCl(dcypb)] was investigated. In all cases, mixed, chloro‐bridged complexes were formed in quantitative yield (see 5 – 8, 9 – 16, 18, 19, 21 , and 22 ). The six new complexes 5, 8, 9, 13, 15 , and 22 were characterized by single‐crystal X‐ray analysis (Figs. 1–3).     

Metal–Organic Framework‐Derived Carbon Nanorods Encapsulating Bismuth Oxides for Rapid and Selective CO2 Electroreduction to Formate

Carbon dioxide (CO₂) conversion is promising in alleviating the excessive CO₂ level and simultaneously producing valuables. This work reports the preparation of carbon nanorods encapsulated bismuth oxides for the efficient CO₂ electroconversion toward formate production. This resultant catalyst exhibits a small onset potential of ?0.28 V vs. RHE and partial current density of over 200 mA cm^?2 with a stable and high Faradaic efficiency of 93 % for formate generation in a flow cell configuration. Electrochemical results demonstrate the synergistic effect in the Bi₂O₃@C promotes the rapid and selective CO₂ reduction in which the Bi₂O₃ is beneficial for improving the reaction kinetics and formate selectivity, while the carbon matrix would be helpful for enhancing the activity and current density of formate production. This work provides effective bismuth‐based MOF derivatives for efficient formate production and offers insights in promoting practical CO₂ conversion technology.     

Synthesis of propylene carbonate from carbon dioxide using trans‐dichlorotetrapyridineru‐ thenium(II) as catalyst

trans‐Dichlorotetrapyridineruthenium(II) [trans‐RuCl₂(py)₄] was synthesized and the structure was determined by single crystal X‐ray crystallography. Highly efficient formation of propylene carbonate (PC) from carbon dioxide and propylene oxide was achieved by using a catalyst system composed of trans‐RuCl₂(py)₄ and hexadecyl trimethyl ammonium bromide under mild conditions (4h, 80 °C, 3.0 MPa). PC was obtained in nearly 100% selectivity without the formation of a polymer. The catalyst could be recycled constantly many times without any significant loss of its catalytic activity. On the basis of the results, a mechanism for the reaction was proposed. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Axial base‐controlled catalytic activity,oxidative stability and product selectivity of water‐insoluble manganese and iron porphyrins for oxidation of styrenes in water under green conditions

A series of water‐insoluble iron(III) and manganese(III) porphyrins, FeT(2‐CH₃)PPCl, FeT(4‐OCH₃)PPCl, FeT(2‐Cl)PPCl, FeTPPCl, MnT(2‐CH₃)PPOAc, MnT(4‐OCH₃)PPOAc, MnT(2‐Cl)PPOAc and MnTPPOAc, in the presence of imidazole (ImH), F^?, Cl^?, Br^? and acetate were used as catalysts for the aqueous‐phase heterogeneous oxidation of styrenes to the corresponding epoxides and aldehydes with sodium periodate. Also, the effect of various reaction parameters such as reaction time, molar ratio of catalyst to axial base, type of axial base, molar ratio of olefin to oxidant and nature of metal centre on the activity and oxidative stability of the catalysts and the product selectivity was investigated. Higher catalytic activities were found for the iron complexes. Interestingly, the selectivity towards the formation of epoxide and aldehyde (or acetophenone) was significantly influenced by the type of axial base. Furthermore, Br^? and ImH were found to be the most efficient co‐catalysts for the oxidation of olefins performed in the presence of the manganese and iron porphyrins, respectively. The optimized molar ratio of catalyst to axial base was different for various axial bases. Also, the order of co‐catalyst activity of the axial bases obtained in aqueous medium was different from that reported for organic solvents. The use of a convenient axial base under optimum reaction catalyst to co‐catalyst molar ratio in the presence of the manganese porphyrin gave the oxidative products with a conversion of ca 100% in a reaction time of less than 3 h. However, the catalytic activity of the iron porphyrins could not be effectively improved by increasing the catalyst to co‐catalyst molar ratio.     

Efficient Access to Substituted Silafluorenes by Nickel‐Catalyzed Reactions of Biphenylenes with Et2SiH2

The reaction of biphenylene ( 1 ) with Et₂SiH₂ in the presence of [Ni(PPhMe₂)₄] results in the formation of a mixture of 2‐diethylhydrosilylbiphenyl [ 2 (Et₂HSi)] and 9,9,‐diethyl‐9‐silafluorene ( 3 ). Silafluorene 3 was isolated in 37.5 % and 2 (Et₂HSi) in 36.9 % yield. The underlying reaction mechanism was elucidated by DFT calculations. 4‐Methyl‐9,9‐diethyl‐9‐silafluorene ( 7 ) was obtained selectively from the [Ni(PPhMe₂)₄]‐catalyzed reaction of Et₂SiH₂ and 1‐methylbiphenylene. By contrast, no selectivity could be found in the Ni‐catalyzed reaction between Et₂SiH₂ and the biphenylene derivative that bears tBu substituents in the 2‐ and 7‐positions. Therefore, two pairs of isomers of tBu‐substituted silafluorenes and of the related diethylhydrosilylbiphenyls were formed in this reaction. However, a subsequent dehydrogenation of the diethylhydrosilylbiphenyls with Wilkinson’s catalyst yielded a mixture of 2,7‐di‐tert‐butyl‐9,9‐diethyl‐9‐silafluorene ( 8 ) and 3,6‐di‐tert‐butyl‐9,9‐diethyl‐9‐silafluorene ( 9 ). Silafluorenes 8 and 9 were separated by column chromatography.     

Ethylene polymerization reactions with multicenter Ziegler‐Natta catalysts—Manipulation of active center distribution

This article describes ethylene/1‐hexene copolymerization reactions with a supported titanium‐based, multicenter Ziegler‐Natta catalyst. The catalyst was modified by pretreating its solid precursor with AlEt₂Cl and with similar organoaluminum chlorides, Al₂Et₃Cl₃, AlEtCl₂, and AlMe₂Cl. Testing of the untreated and the pretreated catalysts in copolymerization reactions under standard reaction conditions demonstrated that the modifying agents produce two changes in the catalyst. First, the pretreatment significantly reduces the reactivity of active centers that produce high molecular weight, highly crystalline copolymer components with a low 1‐hexene content. Second, the pretreatment noticeably increases the reactivity of active centers that produce low molecular weight copolymer components with a high 1‐hexene content. The first effect is caused by Lewis acid‐base interactions of the modifiers with the active centers, whereas the second (activating) effect is due to the removal of catalyst poisons (organosilicon compounds generated in the process of the catalyst synthesis) by AlEt₂Cl. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4219–4229, 2010     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

A Magnetically Separable Catalyst for Synthesis of 1‐Phenoxy‐2‐propanol Via Atom‐economic Reaction

A magnetically separable catalyst Al₂O₃‐MgO/Fe₃O₄ was prepared by Al₂O₃‐MgO supported on magnetic oxide Fe₃O₄ and charactered by FT‐IR, XRD and SEM. The mixed oxides afforded high catalytic activity and selectivity for synthesis of 1‐phenoxy‐2‐propanol from phenol and propylene oxide with 80.3% conversion and 88.1% selectivity to 1‐phenoxy‐2‐propanol. Especially, facile separation of the catalyst by a magnet was obtained and the catalytic performance of the recovered catalyst was unaffected even at the forth run.     

Synthesis of 5-<Emphasis Type="Italic">tert</Emphasis>-butyl-1,2,3-trimethylbenzene catalyzed by [Et<Subscript>3</Subscript>NH]Cl–AlCl<Subscript>3</Subscript>

Common Lewis acids and Lewis acidic ionic liquid catalysts were applied in the synthesis of 5-tert-butyl-1,2,3-trimethylbenzene from 1,2,3-trimethylbenzene and 2-chloro-2-methylpropane, where [Et₃NH]Cl–AlCl₃ demonstrated the most promising catalytic potential. The effects of reaction time, temperature, catalyst composition and dosage have been systematically studied in the presence of [Et3NH]Cl–AlCl3. The maximum selectivity of 90.32% was achieved upon heating at 10°C for 5 h with a mass fraction of [Et₃NH]Cl–AlCl₃ to 1,2,3-trimethylbenzene of 10%. Activity of the ionic liquid catalyst remained high after several cycles.     

Electroactive methacrylate‐based triblock copolymer elastomer for actuator application

A series of ABA triblock copolymers of methyl methacrylate (MMA) and dodecyl methacrylate (DMA) [poly(MMA‐b‐DMA‐b‐MMA)] (PMDM) were synthesized by Ru‐based sequential living radical polymerization. For this, DMA was first polymerized from a difunctional initiator, ethane‐1,2‐diyl bis(2‐chloro‐2‐phenylacetate) with combination of RuCl₂(PPh₃)₃ catalyst and nBu₃N additive in toluene at 80 °C. As the conversion of DMA reached over about 90%, MMA was directly added into the reaction solution to give PMDM with controlled molecular weight (M_w/M_n ≤ 1.2). These triblock copolymers showed well‐organized morphologies such as body centered cubic, hexagonal cylinder, and lamella structures both in bulk and in thin film by self‐assembly phenomenon with different poly(methyl methacrylate) (PMMA) weight fractions. Obtained PMDMs with 20–40 wt % of the PMMA segments showed excellent electroactive actuation behaviors at relatively low voltages, which was much superior compared to conventional styrene‐ethylene‐butylene‐styrene triblock copolymer systems due to its higher polarity derived from the methacrylate backbone and lower modulus. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

One‐Step Production of 1,3‐Butadiene from 2,3‐Butanediol Dehydration

We report the direct production of 1,3‐butadiene from the dehydration of 2,3‐butandiol by using alumina as catalyst. Under optimized kinetic reaction conditions, the production of methyl ethyl ketone and isobutyraldehyde, formed via the pinacol–pinacolone rearrangement, was markedly reduced and almost 80 % selectivity to 1,3‐butadiene and 1,3‐butadiene could be achieved. The presence of water plays a critical role in the inhibition of oligomerization. The amphoteric nature of γ‐Al₂O₃ was identified as important and this contributed to the improved catalytic selectivity when compared with other acidic catalysts.     

Deoximation Reaction in Room Temperature Ionic Liquids under Mild Conditions

Deoximation in metal chloride ionic liquids based on 1‐alkyl‐3‐methylimidazolium and triethylene ammonium cations, such as AmimBr(Cl)‐MCl_x(A=ethyl, butyl, benzyl; M=Al, Fe, Cu, Sn and Zn; x=2, 3) and Et₃NHCl‐FeCl₃ were investigated under mild conditions. Ferrate chloride ionic liquid was proved to be an effective catalyst for deoximation of cyclohexanone oxime, exhibiting high conversion of oximes and selectivity to cyclohexanone. Good performance for the deoximation of other oximes such as salicylald oxime, acetone oxime, benzophenone oxime, 4‐nitrobenzald oxime, acetophenone oxime, 2‐chlorobenzaldehyde oxime, Acetald oxime, 2‐butanone oxime and (1R)‐camphor oxime was also achieved with bmimBr‐FeCl₃ as catalyst and solvent. The deoximation was determined to carry out via acid‐catalytic hydrolysis and the reaction mechanism was proposed.     

Polystyrene-supported Phenol/DMAP： an Efficient Binary Catalyst System for CO2 Fixation to Give Cyclic Carbonates

Polystyrene-supported phenol （PS-PhOH） was successfully synthesized by alkylation reaction of phenol with 2% DVB cross-linked chloromethylated polystyrene and characterized by IR spectra and elemental analysis. In conjunction with an organic base such as DMAP, DBU, triethylamine （Et3N）, diethylamine （Et2NH） or pyridine, the PS-PhOH could effectively catalyze the coupling reaction of carbon dioxide with epoxides to give cyclic carbonates in high yield and selectivity under mild conditions. The binary catalyst system of the PS-PhOH/DMAP was found to be the most active. The influence of reaction temperature, carbon dioxide pressure and reaction time on the yield of product was carefully investigated. The PS-PhOH could be recycled by simple filtration for at least up to ten times without loss of catalytic activity.     

Hydrogen transfer hydrogenation of nitrobenzene to aniline with Ru(acac)3 as the catalyst

Tris(acetylacetonato)ruthenium(III)(Ru(acac)₃) was synthesized with RuCl₃·nH₂O and acetylacetone as raw materials. The structure of Ru(acac)₃ was identified by FI-IR, ¹H NMR, ¹³C NMR, and elemental analysis. It was used in the catalytic hydrogen transfer hydrogenation of nitrobenzene with sodium formate as hydrogen donor. The effects of reaction conditions on the process, such as temperature, time, dosage of catalyst, and kinds of hydrogen donor, were investigated. The optimal reaction parameters were determined as follows: 80 °C, 4.0 h, the substrate nitrobenzene 20 mL, sodium formate 27.20 g, Ru(acac)₃ 0.96 g, the conversion of nitrobenzene is 100.0 %, the yield of aniline and the selectivity to aniline are 96.65 %. The reaction mechanism is proposed and analyzed. It exhibited excellent catalytic properties in the hydrogen transfer hydrogenation of nitrobenzene to aniline.     

Effect of 3% Re2O7/60%Al2O3 - 40%SiO2 Catalyst Alkylation Time and Temperature Using Et4Pb on Methyl Erucate Conversion

A study of the alkylation of 3% Re₂O₇/60%Al₂O₃-40%SiO₂ catalyst using tetraethyllead (Et₄Pb)(TEL) shows that the reaction time and temperature affect the catalyst activity and selectivity in the methyl erucate metathesis reaction. This revised version was published online in June 2006 with corrections to the Cover Date.     

Use of Neodymium Diiodide in the Synthesis of Organosilicon, ‐Germanium and ‐Tin Compounds

The reactivity of neodymium diiodide, NdI₂ ( 1 ), towards organosilicon, ‐germanium and ‐tin halides has been investigated. Compound 1 readily reacts with Me₃SiCl in DME to give trimethylsilane (6 %), hexamethyldisilane (4 %) and (Me₃Si)₂O (19 %). The reaction with Et₃SiBr in THF results in formation of Et₃SiSiEt₃ (17 %) and Et₃SiOBuⁿ (34 %). Alkylation of Me₃SiCl with PrⁿCl in the presence of 1 in THF affords Me₃SiPrⁿ (10 %), Me₃SiOBuⁿ (52 %) and Me₃SiSiMe₃ (1 %). The main product identified in the reaction mixture formed upon interaction of 1 with dichlorodimethylsilane Me₂SiCl₂ in THF is di‐n‐butoxydimethylsilane Me₂Si(OBuⁿ)₂ (54 %) together with minor amounts of Me₂Si(OBuⁿ)Cl. The reaction of 1 with Me₃GeBr under the same conditions produces Me₃GeGeMe₃ (44 %), Me₃GeH (3 %), and Me₃GeI (7 %). An analogous set of products was obtained in the reaction with Et₃GeBr. Treatment of trimethyltin chloride with 1 causes reduction of the former to tin metal (74 %). Me₃SnH (7 %) and hexamethyldistannane (11 %) were identified in the volatile products. The reaction of 1 with Me₃SiI provides straightforward access to hepta‐coordinated NdI₃(THF)₄ ( 2 ), the structure of which was determined by X‐ray diffraction.