Heterogeneous versus Homogeneous Copper(II) Catalysis in Enantioselective Conjugate‐Addition Reactions of Boron in Water

We have developed Cu^II‐catalyzed enantioselective conjugate‐addition reactions of boron to α,β‐unsaturated carbonyl compounds and α,β,γ,δ‐unsaturated carbonyl compounds in water. In contrast to the previously reported Cu^I catalysis that required organic solvents, chiral Cu^II catalysis was found to proceed efficiently in water. Three catalyst systems have been exploited: cat. 1: Cu(OH)₂ with chiral ligand L1 ; cat. 2: Cu(OH)₂ and acetic acid with ligand L1 ; and cat. 3: Cu(OAc)₂ with ligand L1 . Whereas cat. 1 is a heterogeneous system, cat. 2 and cat. 3 are homogeneous systems. We tested 27 α,β‐unsaturated carbonyl compounds and an α,β‐unsaturated nitrile compound, including acyclic and cyclic α,β‐unsaturated ketones, acyclic and cyclic β,β‐disubstituted enones, acyclic and cyclic α,β‐unsaturated esters (including their β,β‐disubstituted forms), and acyclic α,β‐unsaturated amides (including their β,β‐disubstituted forms). We found that cat. 2 and cat. 3 showed high yields and enantioselectivities for almost all substrates. Notably, no catalysts that can tolerate all of these substrates with high yields and high enantioselectivities have been reported for the conjugate addition of boron. Heterogeneous cat. 1 also gave high yields and enantioselectivities with some substrates and also gave the highest TOF (43 200 h^?1) for an asymmetric conjugate‐addition reaction of boron. In addition, the catalyst systems were also applicable to the conjugate addition of boron to α,β,γ,δ‐unsaturated carbonyl compounds, although such reactions have previously been very limited in the literature, even in organic solvents. 1,4‐Addition products were obtained in high yields and enantioselectivities in the reactions of acyclic α,β,γ,δ‐unsaturated carbonyl compounds with diboron 2 by using cat. 1, cat. 2, or cat. 3. On the other hand, in the reactions of cyclic α,β,γ,δ‐unsaturated carbonyl compounds with compound 2 , whereas 1,4‐addition products were exclusively obtained by using cat. 2 or cat. 3, 1,6‐addition products were exclusively produced by using cat. 1. Similar unique reactivities and selectivities were also shown in the reactions of cyclic trienones. Finally, the reaction mechanisms of these unique conjugate‐addition reactions in water were investigated and we propose stereochemical models that are supported by X‐ray crystallography and MS (ESI) analysis. Although the role of water has not been completely revealed, water is expected to be effective in the activation of a borylcopper(II) intermediate and a protonation event subsequent to the nucleophilic addition step, thereby leading to overwhelmingly high catalytic turnover.     

CeCl3·7H2O-NaI catalyzed intramolecular addition reactions of 7-hydroxy-1,3-dienes: a facile approach to hexahydrobenzofurans and tetrahydrofurans

CeCl₃·7H₂O-NaI effectively catalyzed intramolecular cyclization of cyclic 7-hydroxy-1,3-dienes, yielding hexahydrobenzofurans in diastereoselective fashion. This cyclization has been applied to synthesize tetrahydrofurans from acyclic 7-hydroxy-1,3-dienes.     

Synthesis and transformations of metallacycles 41. Cyclomagnesiation of O-containing 1,2-dienes with Grignard reagents in the presence of Cp2TiCl2

A Cp₂TiCl₂-catalyzed intermolecular homocyclomagnesiation of O-containing 1,2-dienes and cross-cyclomagnesiation of O-containing 1,2-dienes with aliphatic 1,2-dienes of cyclic and acyclic structure have been accomplished using Grignard reagents, which led to mono- and bicyclic organomagnesium compounds in 61–94% yields.     

Switching of global minima of novel germylenic reactive intermediates via halogens (X): C2GeH2 vs. C2GeHX at ab initio and DFT levels

For 30 C₂GeHX germylenic isomers, one cyclic structure, X-germacyclopropenylidene, and three acyclics are considered, which include: ethynyl-X-germylene, X-vinylidenegermylene, and (X-ethynyl)germylene (X = H, F, Cl, and Br). The global minimum among six isomeric C₂GeH₂ (where X = H), is found to be cyclic, aromatic, singlet germacyclopropenylidene. In contrast, among the 24 corresponding halogermylenes, C₂GeHX (where X = F, Cl, and Br), the global minima switch to acyclic, singlet ethynylhalogermylenes, at eight reasonably high ab initio and DFT levels. The direct resonance interaction between X and the divalent center Ge in the singlet acyclic ethynylhalogermylene structures, is claimed to justify switching of the calculated global minima in the halo derivatives. GIAO-NICS calculations indicate that the X-germacyclopropenylidene isomer is more aromatic for X = H than X = F, Cl, or Br. The angle ∠XGeC bending potential energy curves show the singlet and triplet ethynylgermylene crossing at ≈146°, for X = H.     

Co2(CO)8 as a convenient in situ CO source for the direct synthesis of benzamides from aryl halides (Br/I) via aminocarbonylation

A fast, mild, and functional group tolerant method for the direct synthesis of benzamides from aryl halides (Br, I) via aminocarbonylation, using solid Co₂(CO)₈ as a convenient CO source, has been demonstrated. The developed method is applicable to a wide variety of 1° and cyclic and acyclic 2° amines. Nitro substituted (o, m and p) aryl halides have easily been converted to the corresponding benzamides, without the reduction of the nitro group, in high yields using this in situ carbonylation methodology under microwave irradiation.     

Stereochemically controlled synthesis of unsaturated acids via diphenylphosphinoyl (Ph2PO) -ketoacids

Acylation of phosphine oxide anions with derivatives of cyclic anhydrides or oxidative cleavage of cyclic allyl phosphine oxides gives Ph₂PO-ketoacids: reduction, separation of diastereoisomers, and completion of the Horner-Wittig reaction gives single isomers ($\text{E}$) or ($\text{Z}$) of unsaturated acids.     

An alternative quinoline synthesis by via Friedländer reaction catalyzed by Yb(OTf)3

Quinolines have been synthesized in very good yields from 2-aminoarylketones and differently substituted carbonyl compounds in the presence of Yb(OTf)₃ as the catalyst. The method is applicable to both cyclic and acyclic carbonyl compounds with only slight differences in the experimental procedure.     

Molybdenum oxide/bipyridine hybrid material {[MoO3(bipy)][MoO3(H2O)]}n as catalyst for the oxidation of secondary amines to nitrones

The inorganic-organic hybrid material {[MoO₃(bipy)][MoO₃(H₂O)]}_n (bipy = 2,2′-bipyridine) can be used as a water-tolerant catalyst for the oxidation of secondary amines under mild conditions using either urea hydrogen peroxide (UHP) or tert-butylhydroperoxide (TBHP) as the oxidant. Under optimized reaction conditions (2 mol % catalyst, 3-4 equiv TBHP, CH₂Cl₂ as the solvent, 40 °C), the corresponding nitrones were obtained with different efficiency depending on the nature of the cyclic or acyclic amine used.     

An electrochemical study of (η-C5H5)2Ti(NCS)2

The reduction of titanocene dithiocyanate in various solvents has been examined using the techniques of polarography, voltammetry, controlled potential electrolysis and cyclic voltammetry. In THF and CH₂Cl₂, Cp₂Ti(NCS)₂ undergoes successive one-electron transfer reactions, and by using a combination of electrochemical and EPR techniques it has been possible to confirm the stability of [Cp₂Ti(NCS)₂]^? in these solvents. In DMF, however, an irreversible dimerization follows the first electron transfer.     

LiCoO2对LiMn2O4改性过程的研究

在LiCoO2、LiMn2O4、LiNiO2这三种锂离子电池正极材料中,尖晶石LiMn2O4由于具有价廉、对环境友好、使用安全的显著优点,被普遍认为是最有希望的新型正极材料。但该材料在高温下较快的容量衰减制约了其规模应用[1~3]。为改善LiMn2O4的高温性能,各国学者普遍采用掺杂法,即在制备L     

Electrochemical behavior and assembly of tetranuclear Dawson-derived sandwich compound [Cd4(H2O)2(As2W15O56)2] on 4-aminobenzoic acid modified glassy carbon electrode

The transition metal-substituted heteropolyoxoanion, Cd₄(H₂O)₂(As₂W₁₅O₅₆)₂¹²⁻ (As₄W₃₀Cd₄), is one of the trivacant Dawson derivatives. Its redox electrochemistry has been studied in acid buffer solutions using cyclic voltammetry. It exhibited three steps of four-electron redox waves attributed to redox processes of the tungsten-oxo framework. Through layer-by-layer assembly, the compound was first successfully immobilized on a 4-aminobenzoic acid modified glassy carbon electrode surface by alternate deposition with a quaternized poly(4-vinylpyridine) partially complexed with [Os(bpy)₂Cl]^2+/+ (denoted as QPVP-Os). Thus, prepared multilayer films have been characterized by cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy (UV-vis). The electrocatalytic activities of the multilayer films containing As₄W₃₀Cd₄ have been investigated on the reduction of three substrates of important analytical interests, NO₂⁻, BrO₃⁻ and IO₃⁻. And with the increase of the number of As₄W₃₀Cd₄ layers, the catalytic current towards the reduction of BrO₃⁻ was enhanced and the catalytic potential shifted positively.     

A mild and efficient chemoselective protection of amines as N-benzyloxycarbonyl derivatives in the presence of La(NO3)3·6H2O under solvent-free conditions

A facile and versatile method for the chemoselective N-benzyloxycarbonylation of amines has been developed by treatment with benzyloxycarbonyl chloride (Cbz-Cl) in the presence of lanthanum(III) nitrate hexahydrate under solvent-free conditions. The method is general for the preparation of N-Cbz derivatives of aliphatic (acyclic and cyclic) and aromatic amines.     

One-step synthesis of pentavalent triphenylantimony derivatives Ph3Sb(OSiR3)2, Ph3Sb(OCH2CH2)2NH and Ph3Sb(OCH2CH2NMe2)2: X-ray molecular structure of Ph3Sb(OSiMe3)2

Pentavalent bis(triorganosiloxy)triphenylantimony derivatives, Ph₃Sb(OSiR₃)₂ (R = Me, Ph), were synthesized by reaction of triphenylantimony with trimethyl- or triphenylsilanol in the presence of tert-butylhydroperoxide by the mild reaction conditions (0-5 °C, 2 h). The reaction of triphenylantimony with diethanolamine in the presence of tert-butylhydroperoxide gave the cyclic compound Ph₃Sb(OCH₂CH₂)₂NH. The mixture of Ph₃SbO and Ph₃Sb(OCH₂CH₂NMe₂)₂ was obtained by the reaction of triphenylantimony with 2-(N,N-dimethylamino)ethanol in the presence of tert-butylhydroperoxide.     

2,2-diphenyl-2λ5-phospha-phenalenyl-und 2,2-dimethyl-2λ5-phospha-indenyl-lithium

From the reaction of 1,8-bis(bromomethyl)naphthalene with diphenyl(trimethylsilyl)phosphine a cyclic phosphonium salt IX is formed which can be rearranged with (CH₃)₃PCH₂ to yield the cyclic ylide X. Its metallation with t-butyllithium gives 2,2-diphenyl-2λ⁵-phospha-phenalenyl-lithium XI. The anion of XI cannot be seen as a delocalized phospha-phenalenyl π-system but rather as a phosphonium-bis-ylide similar to the diphenylphosphonium-bis-benzylide.From 1,2-bis(chloromethyl)benzene and (C₆H₅)₂PSi(CH₃)₃ or from 1,2-bis(chloromagnesiummethyl)benzene and CH₃PCl₂, followed by quaternization using CH₃Br, cyclic phosphonium salts (XII and XV, respectively) can also be obtained, which may again be rearranged to form the ylides XIII or XVI. XVI gives with (CH₃)₃CLi 2,2-dimethyl-2λ⁵-phospha-indenyl-lithium XVII, containing a dimethyl-phosphonium-bis-ylide anion (“isophosphindolyl-lithium”).     

Palladium‐mediated polymerization of cyclic diazoketones

Palladium‐mediated polymerization of cyclic diazoketones was investigated. Although cyclic diazoketones 1a,b derived from cyclohexanone and 1‐tetralone did not homopolymerize, they can be used as a comonomer for copolymerization with polymerizable acyclic diazoketones. On the other hand, an α,β‐unsaturated cyclic diazoketone 2a prepared from 2‐cyclohexen‐1‐one polymerized to give a polymer poly 2a ′ with M_n = 1400 in a 23.8% yield. Addition of some nucleophiles to C?C bond in poly 2a ′ was carried out. Copolymerization of 2a and its dimethyl‐substituted analogues 2b,c with acyclic diazoketones was also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1638–1648, 2008     

Influence of H3PMo12O40/SiO2 thermal treatment on adsorbed forms of formaldehyde and formic acid

Effect of the H₃PMo₁₂O₄₀/SiO₂(P-Mo-HPA) thermal treatment on adsorbed forms of HCOOH and H₂CO has been studied by IR spectroscopy. On the sample pretreated at 150°C, HCOOH adsorbed mainly as hydrogen-bonded complexes. The HPA calcination at 350°C resulted in the formation of surface formates along with hydrogen-bonded complexes. This proves the formation of coordinatively unsaturated surface cations (Lewis acid sites) during HPA dehydration. Alteration of the surface composition due to dehydration was found to have a major influence on the H₂CO adsorbed forms.     

Possible cyclic triatomic molecules including N2O and O3

Proposed metastable cyclic conformations of N₂O⁺ and O₃, have been examined by INDO and ab initio calculations. INDO is found to exaggerate the stability of possible cyclic species. In ab initio calculations a multi-dimensional energy surface must be explored. With a [5, 3] basis SCF calculations yield a trivariate local minimum for cyclic O₃. However, for N₂O, N₂O⁺ and O²⁺₃, starting from cyclic “bonded” structures, paths involving asymmetric deformations run downhill in energy to a diatomic molecule and a separated atom. A paradox concerning the removal of an electron from an antibonding orbital in a cyclic molecule is resolved.     

Retrospective View on Recent Developments in Cyclobutane Synthesis via [2+2] Photocycloaddition of Unsaturated Ketones to Acyclic Dienes

This synopsis addresses cyclobutane formation via light‐induced [2+2] cycloaddition from both cyclic and acyclic unsaturated carbonyl compounds, and 2,3‐dimethylbuta‐1,3‐diene     

双(1-甲基咪唑-2-基)甲酮、双(1-甲基咪唑-2-基)甲烷及双(1-甲基咪唑-2-基)乙烯与第六族羰基金属化合物的反应研究(英文)

本文研究了羰基钼(钨)与双(1-甲基咪唑-2-基)甲酮和双(1-甲基咪唑-2-基)甲烷以及双(1-甲基咪唑-2-基)乙烯的反应,获得了6个双齿螯合的双(1-甲基咪唑-2-基)甲酮,双(1-甲基咪唑-2-基)甲烷和双(1-甲基咪唑-2-基)乙烯四羰基金属衍生物,以及1个单齿配位的双(1-甲基咪唑-2-基)乙烯五羰基钨化合物。它们的结构通过红外,核磁以及X-射线单晶衍射分析得到确证。所有这些新化合物的电化学测试表明,它们只存在一个不可逆的氧化过程。     

Synthesis, characterization and study of the chromogenic properties of the hybrid polyoxometalates [PW11O39(SiR)2O] (R = Et, (CH2)nCHCH2 (n = 0, 1, 4), CH2CH2SiEt3, CH2CH2SiMe2Ph)

Reaction of Cl₃SiR or (EtO)₃SiR with [PW₁₁O₃₉]⁷⁻ affords the disubstituted hybrid anions [PW₁₁O₃₉(SiR)₂O]³⁻. These species have been characterized by IR spectroscopy in the solid state and by multinuclear NMR (¹H, ²⁹Si, ³¹P and ¹⁸³W) and cyclic voltammetry in solution. The hydrosilylation of [PW₁₁O₃₉(Si-CHCH₂)₂O]³⁻ has been achieved with Et₃SiH and PhSiMe₂H. These are the first examples of hydrosilylation on a hybrid tungstophosphate core. The chromogenic behaviour of hybrid species has been demonstrated in solution.