Photoprocesses in mesoporous silicas prepared by a supramolecular templating approach

Mesoporous solids derived from inorganic–surfactant mesostructured materials have been investigated extensively from both fundamental and practical viewpoints owing to their unusually high surface area and porosity, ordered pore arrangements, pore size uniformity, as well as possible surface engineering. These characteristic features of the mesoporous solids have motivated research to apply them practically. This class of materials was originally expected to find applications as adsorbents and catalysts, while other advanced materials applications such as in optics/electronics became a field of interest after their successful fabrication in controlled morphology. This review article summarizes the studies on the photochemistry and photophysics of guest species occluded in mesoporous silicas in order to highlight the characteristic features of the mesostructured and mesoporous solids and their potential for optical applications.     

Nanoporous silica films containing aluminum and titanium

By utilizing surfactant aggregates as supramolecular templates, mesoporous and mesostructured silicas with highly ordered structures became available. The resulting mesoporous silicas are promising candidates to host various photo- and electro-active species along with catalytically active species, due to their large and controllable pore sizes, highly ordered pore arrangements with low dimensional geometries, and reactive surfaces. We have developed the rapid solvent evaporation method, which is a modified sol-gel process, for synthesizing the mesostructured silica-surfactant films as well as the mesoporous silica films. Supported thin films, self-standing films and bubbles of mesoporous silicas have been synthesized by the rapid solvent evaporation method. The microstructures of the films have also been successfully controlled by changing the synthetic conditions. Taking advantage of the ease of synthetic operation and the transparency and homogeneity of the resulting materials, we have been interested in the introduction of functional units into the mesostructured materials. This paper reports the synthesis of transparent films of titanium- and aluminum-containing nanoporous silicas to modify the surface properties (such as adsorptive and catalytic) of nanoporous silicas. The incorporation of Al led to the formation of cation exchange or acidic sites on the mesopore surface, as revealed by the cationic dye adsorption experiments. The photocatalytic reactions of the Ti-containing nanoporous silica films were also examined.     

Organic-inorganic hybrid mesoporous silicas: functionalization, pore size, and morphology control

Topological design of mesoporous silica materials, pore architecture, pore size, and morphology are currently major issues in areas such as catalytic conversion of bulky molecules, adsorption, host-guest chemistry, etc. In this sense, we discuss the pore size-controlled mesostructure, framework functionalization, and morphology control of organic-inorganic hybrid mesoporous silicas by which we can improve the applicability of mesoporous materials. First, we explain that the sizes of hexagonal- and cubic-type pores in organic-inorganic hybrid mesoporous silicas are well controlled from 24.3 to 98.0 A by the direct micelle-control method using an organosilica precursor and surfactants with different alkyl chain lengths or triblock copolymers as templates and swelling agents incorporated in the formed micelles. Second, we describe that organic-inorganic hybrid mesoporous materials with various functional groups form various external morphologies such as rod, cauliflower, film, rope, spheroid, monolith, and fiber shapes. Third, we discuss that transition metals (Ti and Ru) and rare-earth ions (Eu(3+) and Tb(3+)) are used to modify organic-inorganic hybrid mesoporous silica materials. Such hybrid mesoporous silica materials are expected to be applied as excellent catalysts for organic reactions, photocatalysis, optical devices, etc.     

Pyrolysis of mesoporous silica-immobilized 1,3-diphenylpropane. Impact of pore confinement and size

Mesoporous silicas such as SBA-15 and MCM-41 are being actively investigated for potential applications in catalysis, separations, and synthesis of nanostructured materials. A new method for functionalizing these mesoporous silicas with aromatic phenols is described. The resulting novel hybrid materials possess silyl aryl ether linkages to the silica surface that are thermally stable to ca. 550 degrees C, but can be easily cleaved at room temperature with aqueous base for quantitative recovery of the organic moieties. The materials have been characterized by nitrogen physisorption, FTIR, NMR, and quantitative analysis of surface coverages. The maximum densities of 1,3-diphenylpropane (DPP) molecules that could be grafted to the surface were less than those measured on a nonporous, fumed silica (Cabosil) and were also found to decrease as a function of decreasing pore size (5.6-1.7 nm). This is a consequence of steric congestion in the pores that is magnified at the smaller pore sizes, consistent with parallel studies conducted using a conventional silylating reagent, 1,1,3,3-tetramethyldisilazane. Pyrolysis of the silica-immobilized DPP revealed that pore confinement leads to enhanced rates and altered product selectivity for this free-radical reaction compared with the nonporous silica, and the rates and selectivities also depended on pore size. The influence of confinement is discussed in terms of enhanced encounter frequencies for bimolecular reaction steps and pore surface curvature that alters the accessibility and resultant selectivity for hydrogen transfer steps.     

Electroanalytical Applications of Microporous Zeolites and Mesoporous (Organo)Silicas: Recent Trends

Microporous zeolites and ordered mesoporous (organo)silicas have been widely used as electrode modifiers because of their attractive properties (ion exchange and size selectivity of zeolites, well ordered nanoreactors containing a high number of widely accessible active centers in mesoporous (organo)silicas). These properties have been intelligently combined to selected redox processes to improve the response of the resulting modified electrodes or to design novel electrochemical detection schemes. This up‐to‐date review provides the recent advances made in the electroanalytical applications of zeolite modified electrodes and discusses the interest of ordered mesoporous (organo)silica materials in electroanalysis.     

Tuning stability of mesoporous silica films under biologically relevant conditions through processing with supercritical CO2

Mesoporous materials have been proposed for use in numerous biological environments such as substrates for cell culture and controlled release for drug delivery. Although mesoporous silica synthesis is facile, recent reports (Dunphy et al. Langmuir 2003, 19, 10403; Bass et al. Chem. Mater. 2007, 19, 4349) have demonstrated instability (dissolution) of pure mesoporous silica films under biologically relevant conditions. In this work, we demonstrate a simple processing handle (pressure) to control the dissolution of mesoporous silica films that are synthesized using preformed template films and supercritical CO 2. Spectroscopic ellipsometry is utilized to quantify changes in both the film thickness and porosity; these properties provide insight into the dissolution mechanism. The pore size increases as the films are exposed to phosphate-buffered saline (PBS) through preferential dissolution at the pore wall in comparison to the film surface; a mechanism reminiscent of bulk erosion of scaffolds for drug delivery. Thin mesoporous silica film lifetimes can be extended from several hours using traditional sol-gel approaches to days by using CO 2 processing for identical film thickness. Osteoblast attachment and viability on these films was found to correlate with their increased stability. This enhanced stability opens new possibilities for the utilization of mesoporous silica for biological applications, including drug delivery and tissue engineering.     

MCM-48-like large mesoporous silicas with tailored pore structure: facile synthesis domain in a ternary triblock copolymer-butanol-water system

Assembly of mesostructured silica using Pluronic P123 triblock copolymer (EO(20)-PO(70)-EO(20)) and n-butanol mixture is a facile synthesis route to the MCM-48-like ordered large mesoporous silicas with the cubic Iad mesostructure. The cubic phase domain is remarkably extended by controlling the amounts of butanol and silica source correspondingly. The extended phase domain allows synthesis of the mesoporous silicas with various structural characteristics. Characterization by powder X-ray diffraction, nitrogen physisorption, scanning electron microscopy, and transmission electron microscopy reveals that the cubic Iad materials possess high specific surface areas, high pore volumes, and readily tunable pore diameters in narrow distribution of sizes ranging from 4 to 12 nm. Moreover, generation of complementary pores between the two chiral channels in the gyroid Iad structure can be controlled systematically depending on synthesis conditions. Carbon replicas, using sucrose as the carbon precursor, are obtained with either the same Iad structure or I4(1)/a (or lower symmetry), depending on the controlled synthesis conditions for silica. Thus, the present discovery of the extended phase domain leads to facile synthesis of the cubic Iad silica with precise structure control, offering vast prospects for future applications of large-pore silica materials with three-dimensional pore interconnectivity.     

Advances in the Interfacial Assembly of Mesoporous Silica on Magnetite Particles

Interfacing magnetic particles with ordered mesoporous materials is an effective direction for the development of functional porous composite materials with rationally designed core–shell structures. Owing to the combined properties of magnetic nanoparticles and mesoporous silica (high surface area, large pore volume, porosity, and biocompatibility), core–shell magnetic mesoporous silica materials have generated tremendous interest in various disciplines, including chemistry, materials, bioengineering, and biomedicine. Interfacial assembly strategies enable the rational construction of magnetic mesoporous silica materials with well‐defined core–shell structure, morphology, pore parameters, and surface wettability, which can decisively influence their physical and chemical properties and thus improve their application performance. This Minireview summarizes recent progress in the synthesis of core–shell magnetic mesoporous silica and the adjustment of key parameters, including pore size, morphology, and pore orientation.     

Surface‐Passivated SBA‐15‐Supported Gold Nanoparticles: Highly Improved Catalytic Activity and Selectivity toward Hydrophobic Substrates

Silanol groups on a silica surface affect the activity of immobilized catalysts because they can influence the hydrophilicity/hydrophobicity, matter transfer, or even transition state in a catalytic reaction. Previously, these silanol groups have usually been passivated by using surface‐passivation reagents, such as alkoxysilanes, bis‐silylamine reagents, chlorosilanes, etc., and surface passivation has typically been found in mesoporous‐silicas‐supported molecular catalysts and heteroatomic catalysts. However, this property has rarely been reported in mesoporous‐silicas‐supported metal‐nanoparticle catalysts. Herein, we prepared an almost‐superhydrophobic SBA‐15‐supported gold‐nanoparticle catalyst by using surface passivation, in which the catalytic activity increased more than 14 times for the reduction of nitrobenzene compared with non‐passivated SBA‐15. In addition, this catalyst can selectively catalyze hydrophobic molecules under our experimental conditions, owing to its high (almost superhydrophobic) hydrophobic properties.     

Synthesis of diamine functionalized mesoporous organosilicas with large pores

Hybrid mesoporous silicas functionalized with ethylenediamine groups have been synthesized via sol–gel process under different conditions. The best textural properties, with pore diameters up to 170 Å, have been obtained using carboxylic acids as catalysts in propanol as solvent without the need for any surfactant. The presence of the diamine moiety has been demonstrated by different characterization techniques, and the materials have been used in the adsorption of copper cations. The adsorption capacity of all the solids is high (up to 1.87 mmol/g and up to 2.47 Cu atoms/nm²), with important variations in the properties of the silica surface, besides the role of the immobilized diamine moieties as ligand for copper. In general the surface area seems to be the most important feature controlling the adsorption.     

有序介孔硅胶及其复合材料作固定相在液相色谱中的应用

系统地介绍了有序介孔硅胶及其复合材料的研究进展。重点评述了颗粒状无机介孔硅胶材料、颗粒状有机-无机复合介孔硅胶材料、手性介孔硅胶材料和整块介孔硅胶材料在用作液相色谱固定相方面的最新进展。对硅基有序介孔材料制备方面存在的问题进行了分析,并就该领域今后的发展趋势做了展望。     

One‐Step Grafting of Al2O3 onto Acid‐Made Mesoporous Silica

We report a one‐step convenient chemical coating method of high alumina content onto mesoporous silicas. Aluminia‐coated mesoporous silica with high surface area (?900 m²/g), tuneable pore size (2.0–3.0 nm) and high hydrothermal stability (> 60 h) is obtained. The method may also be generalized for grafting other metal oxides onto mesoporous silica in future work.     

Controlled polymerization in mesoporous silica toward the design of organic-inorganic composite nanoporous materials

Free-radical polymerization inside mesoporous silica has been investigated in order to open a route to functional polymer-silica composite materials with well-defined mesoporosity. Various vinyl monomers, such as styrene, chloromethyl styrene, 2-hydroxyethyl methacrylate, and methacrylic acid, were polymerized after impregnation into mesoporous silicas with various structures, which were synthesized using polyalkylene oxide-type block copolymers. The location of the polymers was systematically controlled with detailed structures of the silica framework and the polymerization conditions. Particularly noteworthy is the polymer-silica composite structure obtained by in situ polymerization after the selective adsorption of monomers as a uniform film on silica walls. The analysis of XRD data and the N(2) adsorption isotherms indicates the formation of uniform polymer nanocoating. The resultant polymer-silica composite materials can easily be post-functionalized to incorporate diverse functional groups in high density, due to the open porous structure allowing facile access for the chemical reagent. The fundamental characteristics of the composite materials are substantiated by testing the biomolecule's adsorption capacity and catalytic reactivity. Depending on the structure and composition of polymers, the resultant polymer-silica composite materials exhibit notably distinct adsorption properties toward biomolecules, such as proteins. Furthermore, it is demonstrated that the nanocoatings of polymers deposited on the mesopore walls have remarkably enhanced catalytic activity and selectivity, as compared to that of bulk polymer resins. We believe that, due to facile functionalization and attractive textural properties, the mesoporous polymer-silica composite materials are very useful for applications, such as adsorption, separation, host-guest complexes, and catalysis.     

Mini Review: Electroanalytical Sensors of Mesoporous Silica Materials

Mesoporous silica materials are promising substrates for electroanalytical sensors and electrocatalysis. Their characteristics include uniform pore sizes, surface areas in excess of 1000 m² g^?1, and long-range ordering of the packing of pores. The size scale, aspect ratio, and properties of mesoporous silica provide advantages in a variety of sensor applications. To improve performance, miniaturize platforms, and expand applications for trace analysis, novel materials with high sensitivity and rapid response have been developed and employed in recent years. These materials include pure mesoporous silica, mesoporous silica functionalized with organic groups, and composite or hybrid mesoporous silica. In this review, recent advances are outlined involving the application of mesoporous silica-based materials in electroanalytical sensors.     

Three‐Dimensional Ultralarge‐Pore Ia3d Mesoporous Silica with Various Pore Diameters and Their Application in Biomolecule Immobilization

Highly ordered mesoporous three‐dimensional Ia3d silica (KIT‐6) with different pore diameters has been synthesized by using pluronic P123 as surfactant template and n‐butanol as cosolvent at different synthesis temperatures in a highly acidic medium. The materials were characterized by XRD and N₂ adsorption. The synthesis temperature plays a significant role in controlling the pore diameter, surface area, and pore volume of the materials. The material prepared at 150 °C, KIT‐6‐150, has a large pore diameter (11.3 nm) and a high specific pore volume (1.53 cm³ g^?1). We also demonstrate immobilization of lysozyme, which is a stable and hard protein, on KIT‐6 materials with different pore diameters. The amount of lysozyme adsorbed on large‐pore KIT‐6 is extremely large (57.2 μmol g^?1) and is much higher than that observed for mesoporous silicas MCM‐41, SBA‐15, and KIT‐5, mesoporous carbons, and carbon nanocages. The effect of various parameters such as buffer concentration, adsorption temperature, concentration of the lysozyme, and the textural parameter of the adsorbent on the lysozyme adsorption capacity of KIT‐6 was studied. The amount adsorbed mainly depends on solution pH, ionic strength, adsorption temperature, and pore volume and pore diameter of the adsorbent. The mechanism of adsorption on KIT‐6 under different adsorption conditions is discussed. In addition, the structural stability of lysozyme molecules and the KIT‐6 adsorbent before and after adsorption were investigated by XRD, nitrogen adsorption, and FTIR spectroscopy.     

Effect of salts on synthesis of mesoporous materials with mixed cationic and anionic surfactants as templates

Mesoporous silica materials were synthesized using tetraеthoxysilane as precursor and liquid crystals formed in aqueous mixtures of cetyl trimethyl ammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) as templates, without and with the addition of NaBr or Na₂SO₄. For this purpose, the formation of liquid crystals as a function of the ratio of CTAB and SDS under different conditions was studied. It was found that liquid crystals formed in the mixed system of CTAB and SDS at certain mixing ratios are well-structured templates for the synthesis of mesoporous silicas. The synthesized silica materials were characterized by transmission electron microscope and nitrogen adsorption/desorption analysis. The pore size of mesoporous silicas could be controlled between 3 to 6 nm by simply changing the concentration of NaBr in solution. The mesoporous silicas exhibited lamellar structure and the order of structural arrangement was promoted with addition of NaBr. However, addition of Na₂SO₄ led to ink-bottle type pores of mesoporous silica with a narrow pore size distribution of around 2 nm and a higher specific surface area of 610 m² g^–1.     

On the nature of the Brønsted acidic groups on native and functionalized mesoporous siliceous SBA-15 as studied by benzylamine adsorption from solution

The concentration and Br?nsted acidity of surface silanol groups on mesoporous silica (SBA-15) has been studied by following the adsorption of benzylamine, BA, from water as a function of pH. The adsorbed amount of BA from water was compared to the maximum amount of BA that could be adsorbed from cyclohexane. Furthermore, the surface concentration and acidity of carboxylic acid functions on surface-functionalized SBA-15 was also studied, which allowed the relative surface concentration of remaining silanols to be obtained. Two types of silanols can be identified, where about 1/5 of the silanols have a pKa 相似文献   

Synthesis of mesoporous silicas inside large pores of inorganic matrix

Template syntheses of mesoporous silicas have been carried out inside large pores of inorganic matrix. Portions of tetraethoxysilane and cetyltrimethylammonium bromide micellar solution were incorporated step-by-step inside pore volume of silica gel with large pore size. Synthesized materials were characterized using thermal analysis, adsorption-desorption of nitrogen and X-ray diffraction scattering.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Preparation and characteristics of electrospun activated carbon materials having meso- and macropores

Mesoporous activated carbon samples were prepared from electrospun PAN-based carbon fibers using physical activation with silica. Textural characterization was performed using nitrogen adsorption at 77 K. The BET specific surface area and pore size distribution of silica activated carbon materials were investigated. According to the increment of silica, BET specific surface area was increased about thirty times and it was found that silica activated carbon materials were highly mesoporous by studying pore surface distribution and pore volume distribution. Surface morphology of silica activated carbon materials were observed by SEM images. The spherical typed carbon materials were investigated. The diameter of spherical typed carbon materials was increased in proportional of the increment of silica.