Hybrid materials containing organometallic cations and 3-D anionic metal dicyanamide networks of type [Cp*2M][M'(dca)3

A new series of hybrid materials of type [Cp*2M][M'(dca)3] has been prepared by cation templation and structurally characterised (M = Fe(III), Co(III); M'= Mn(II), Fe(II), Co(II), Ni(II), Cd(II); dca-= N(CN)2-). The crystallographic analysis of [Cp*2Fe][Cd(dca)(3)] showed that the [Cd(dca)3]- anionic framework is of a symmetrical 3-D alpha-polonium type, containing octahedral Cd nodes and micro (1,5)-dca bridging ligands. The [Cp*2Fe]+ cations occupy the cube-like cavities within the framework. The cationic and anionic-framework sublattices remain magnetically independent and display susceptibilities, over the range 300 to 2 K, of a Curie-Weiss nature obtained by adding a S= 1/2 (Cp*2Fe+) or a S= 0 (Cp*2Co+) contribution to those of the weakly antiferromagnetically coupled frameworks of M'. These hybrid species do not show any intrinsic long-range magnetic order. The present [Cp*2Fe]M'(dca)3] series display the characteristic, unusually shaped [Cp*2Fe]+ Mossbauer line, in the range 295-5 K, assigned (below 101 K) as the sum of a narrow and a broad line. Relaxation effects were evident. The [Fe(dca)3]- compound showed superimposed low-spin Fe(III) and high-spin Fe(II) lines, the latter giving relaxation broadening effects.     

Oxalate-based soluble 2D magnets: the series [K(18-crown-6)]3[M(II)3(H2O)4{M(III)(ox)3}3] (M(III) = Cr, Fe; M(II) = Mn, Fe, Ni, Co, Cu; ox = C2O4(2-); 18-crown-6 = C12H24O6)

The synthesis and magnetic properties of the oxalate-based molecular soluble magnets with general formula [K(18-crown-6)] 3[M (II) 3(H 2O) 4{M (III)(ox) 3} 3] (M (III) = Cr, Fe; M (II) = Mn, Fe, Ni, Co, Cu; ox = C 2O 4 (2-)) are here described. All the reported compounds are isostructural and built up by 2D bimetallic networks formed by alternating M (III) and M (II) ions connected through oxalate anions. Whereas the Cr (III)M (II) derivatives behave as ferromagnets with critical temperatures up to 8 K, the Fe (III)M (II) present ferri- or weak ferromagnetic ordering up to 26 K.     

Increasing the ordering temperatures in oxalate-based 3D chiral magnets: the series [Ir(ppy)2(bpy)][M(II)M(III)(ox)3] x 0.5 H2O (M(II)M(III) = MnCr, FeCr, CoCr, NiCr, ZnCr, MnFe, FeFe); bpy = 2,2'-bipyridine; ppy = 2-phenylpyridine; ox = oxalate dianion)

The synthesis, structure, and physical properties of a novel series of oxalate-based bimetallic magnets obtained by using the Ir(ppy)2(bpy)]+ cation as a template of the bimetallic [M(II)M(III)(ox)3]- network are reported. The compounds can be formulated as [Ir(ppy)2(bpy)][M(II)Cr(III)(ox)3] x 0.5 H2O (M(II) = Ni, Mn, Co, Fe, and Zn) and [Ir(ppy)2(bpy)]-[M(II)Fe(III)(ox)3] x 0.5 H2O (M(II) = Fe, Mn) and crystallize in the chiral cubic space group P4(1)32 or P4(3)32. They show the well-known 3D chiral structure formed by M(II) and M(III) ions connected through oxalate anions with [Ir(ppy)2(bpy)]+ cations and water molecules in the holes left by the oxalate network. The M(II)Cr(III) compounds behave as soft ferromagnets with ordering temperatures up to 13 K, while the Mn(II)Fe(III) and Fe(II)Fe(III) compounds behave as a weak ferromagnet and a ferrimagnet, respectively, with ordering temperatures of 31 and 28 K. These values represent the highest ordering temperatures so far reported in the family of 3D chiral magnets based on bimetallic oxalate complexes.     

夹心金属阳离子和[M(mnt)2阴离子所成盐的合成, 结构及固体物理体质

本工作设计和合成了十个由夹心型金属有机化合物阳离子与金属二硫醇配合物[M(mnt)2]阴离子组成的金属有机盐类化合物:(M'Cp2)[M(mnt)2]或[FeCp(Tol)2][M(mnt)2]其中M=Ni, Pd, Co, Cu或Zn, M'=Fe或Co Cp代表环戊二烯基; Tol代表甲苯; mnt代表, 通过元素分析, IR和NMR对化合物进行表征, 测定了[FeCp(Tol)]2[Ni(mnt)2]的单晶结构。Mossbauer谱和AESR表明(FeCp2)[Ni(mnt)2]是个混合化合物, 提出了该化合物的生成反应机理。测定了所有化合物的固体电导率和部分化合物的固体磁学性质。     

Magnetically ordered molecule-based assemblies

The development of molecules and assemblies of molecules exhibiting technologically important bulk properties, such as magnetic ordering, is an important worldwide research focus. Organic- and molecule-based magnets have been discovered and several families have been reported with magnetic ordering temperatures exceeding room temperature and as high as approximately 125 degrees C. Examples of both hard and soft magnets have been reported with coercivities as high at 27 000 Oe (and exceeding commercially available magnets) have been reported. Several examples are based on the radical anion of tetracyanoethylene, S = 1/2 [TCNE].-. The include ionic zero-dimensional (0-D) [FeCp*2]*+[TCNE]*- (Cp* = pentamethylcyclopentadienide), 1-D [MnTPP]+[TCNE]*- [TPP = meso-tetraphenylporphinato] coordination polymers, and 3-D extended network structured M[TCNE](x).ySolvent (M = V, Mn, Fe, Co, Ni, Dy). This Perspective focuses on work in our laboratory that will be discussed at the Dalton Discussion 9 meeting entitled "Functional Molecular Assemblies." In addition to the overview of TCNE-based organic magnets, the targeted design, preparation, and chemical as well as magnetic characterization of a new family of magnets based on S = 3/2 mixed-valent [Ru(II/III)2(O2CR)4]+ (R = Me, Bu(t)) is described. In particular [Ru2(O2CMe)4]3[Cr(CN)6] prepared from aqueous media possess two interpenetrating cubic lattices and magnetically orders at 33 K. In contrast, [Ru2(O2CBu(t))4]3[Cr(CN)6] forms a 2-D layered lattice and orders at 37.5 K. Both exhibit hysteretic behavior, however, this is quite anomalous for the former cubic lattice. This as well as other anomalous magnetic behaviors is attributed to the presence of the second interpenetrating lattice.     

Oxalato-bridged dinuclear complexes of Cr(III) and Fe(III): synthesis, structure, and magnetism of [(C2H5)4N]4[MM'(ox)(NCS)8] with MM' = CrCr, FeFe, and CrFe

A new series of homo- and heterometallic oxalato-bridged dinuclear compounds of formulas [Et4N]4[MM'(ox)(NCS)8] ([Et4N]+ = [(C2H5)4N]+; ox = C2O4(2-)) with MM' = Cr(III)-Cr(III) (1), Fe(III)-Fe(III) (2), and Cr(III)-Fe(III) (3) is reported. They have been structurally characterized by infrared spectra and single-crystal X-ray diffraction. The three compounds are isostructural and crystallize in the orthorhombic space group Cmca with Z = 8, a = 16.561(8) A, b = 13.481(7) A, and c = 28.168(8) A for 1, a = 16.515(2) A, b = 13.531(1) A, and c = 28.289(4) A for 2, a = 16.664(7) A, b = 13.575(6) A, and c = 28.386(8) A for 3. The structure of 3 is made up of a discrete dinuclear anion [CrFe(ox)(NCS)8]4- and four disordered [Et4N]+ cations, each of them located on special positions. The anion, in a crystallographically imposed C2h symmetry, contains metal cations in distorted octahedral sites. The Cr(ox)Fe group, which is planar within 0.02 A, presents an intramolecular metal-metal distance of 5.43 A. Magnetic susceptibility measurements indicate antiferromagnetic pairwise interactions for 1 and 2 with J = -3.23 and -3.84 cm-1, respectively, and ferromagnetic Cr-Fe coupling with J = 1.10 cm-1 for 3 (J being the parameter of the exchange Hamiltonian H = -2JS1S2). The ESR spectra at different temperatures confirm the magnetic susceptibility data.     

Single chain magnets based on the oxalate ligand

The anionic oxalate-bridged bimetallic chain [Co(H2O)2Cr(ox)3]- shows slow relaxation of the magnetization, typical of the so-called single-chain magnets, when crystallized in segregated layers in a mixed salt with the supramolecular cations [C12H24O6K]+ and [(C12H24O6)(FC6H4NH3)]+. This is the first time that such phenomenon has been observed in an oxalate-bridge material. In view of the wide synthetic versatility exhibited by the oxalate ligand, it opens the door for the realization of a complete family of SCM materials whose physical properties might be tuned by the suitable replacement of M3+ ions within the chain. The information extracted from the systematic study of these compounds should provide important information concerning the main parameters that affect the slow-relaxation phenomena in this sort of 1D nanomagnets.     

M(mu-CN)Fe(mu-CN)M' chains with phthalocyanine iron centers: preparation, structures, and isomerization

The molecular building blocks Fe(II)Pc (Pc = phthalocyaninato2-), Fe(III)Pc, ZnPc, Cp(dppe)Fe, and Cp(PPh3)2Ru were combined in the cyanide-bridged dinuclear reference compounds with M-CN-ZnPc and M-CN-FePc-CN arrays containing Fe(II)Pc and Fe(III)Pc. The linear trinuclear species with the M(mu-CN)Fe(mu-CN)M' backbone were prepared for both Fe(II)Pc and Fe(III)Pc centers, for terminal Fe/Fe, Fe/Ru, and Ru/Ru combinations and for all three possible cyanide orientations (M-CN-Fe-NC-M', M-CN-Fe-CN-M', and M-NC-Fe-CN-M'). The 15 complexes obtained were identified from their IR spectra and six structure determinations. The preferred orientation of the cyanide bridges could be established starting from the [Fe-NC-Fe(III)Pc-CN-Fe]+ complex, which is labile in solution and isomerizes to the corresponding [Fe-CN-Fe(III)Pc-NC-Fe]+ complex. A kinetic analysis of this isomerization has yielded an activation barrier of roughly 110 kJ/mol.     

Structure, magnetism and optical properties of achiral and chiral two-dimensional oxalate-bridged anionic networks with symmetric and asymmetric ammonium cations

A series of two-dimensional (2D) oxalate-based compounds, namely [N(n-C4H9)4][M(II)Cr(III)(ox)3] (M(II) = Mn, Fe; ox = C2O4(2-)) and [N(C2H5)(n-C3H7)(n-C4H9)(n-C5H11)][M(II)M(III)(ox)(3)] ((M(II), M(III)) =(Mn, Cr), (Fe, Cr), (Mn, Fe)) were synthesised starting from racemic tris(oxalato)metalate: rac-[M(III)(ox)3]3- (M(III) = Cr, Fe). For Cr(III), the synthesis has been undertaken starting from resolved (Delta)- or (Lambda)-[Cr(III)(ox)3]3-. The natural circular dichroism measurements assess the enantioselectivity of the synthesis. X-Ray powder diffraction analysis has revealed that, when racemic reagents are used to synthesise Mn(II) containing compounds, a R3c achiral space group is found. In contrast a P6(3) chiral space group is found when starting from (Delta)- or (Lambda)-[Cr(III)(ox)3]3-. Surprisingly, whatever the optical purity of the starting building block, all Fe(II) containing compounds crystallise in the P6(3) chiral space group. The magnetic properties of the synthesised compounds confirm that these compounds are ferromagnets for M(III)= Cr. For M(II)= Mn, Theta ranges between 9 and 11 K and T(c) equals 6 K. For M(II)= Fe, Theta ranges between 14 and 16 K and Tc between 11 and 12 K. [N(C2H5)(n-C3H7)(n-C4H9)(n-C5H11)][Mn(II)Fe(III)(ox)3] is an antiferromagnet with Theta = - 107 K and T(N) = 29 K.     

1,1—二氰乙烯基—2,2—二硫醇盐第一过渡系列金属配合物的研究 Ⅱ.钒(Ⅳ)和铁(Ⅲ)配合物的研究

文献中研究了1,1-二氰乙烯基-2,2-二硫醇盐(简称i-mnt)的Cu(Ⅱ)和 Ni(Ⅱ)配合物.现合成出i-mnt的钒(Ⅳ)和铁(Ⅲ)配合物,根据钒(Ⅳ)配合物的ESR谱和铁(Ⅲ)配合物的Mossbauer谱及其他光谱探讨它们的键合和结构。     

Unraveling the electronic structures of low-valent naphthalene and anthracene iron complexes: X-ray, spectroscopic, and density functional theory studies

Naphthalene and anthracene transition metalates are potent reagents, but their electronic structures have remained poorly explored. A study of four Cp*-substituted iron complexes (Cp* = pentamethylcyclopentadienyl) now gives rare insight into the bonding features of such species. The highly oxygen- and water-sensitive compounds [K(18-crown-6){Cp*Fe(η(4)-C(10)H(8))}] (K1), [K(18-crown-6){Cp*Fe(η(4)-C(14)H(10))}] (K2), [Cp*Fe(η(4)-C(10)H(8))] (1), and [Cp*Fe(η(4)-C(14)H(10))] (2) were synthesized and characterized by NMR, UV-vis, and (57)Fe M?ssbauer spectroscopy. The paramagnetic complexes 1 and 2 were additionally characterized by electron paramagnetic resonance (EPR) spectroscopy and magnetic susceptibility measurements. The molecular structures of complexes K1, K2, and 2 were determined by single-crystal X-ray crystallography. Cyclic voltammetry of 1 and 2 and spectroelectrochemical experiments revealed the redox properties of these complexes, which are reversibly reduced to the monoanions [Cp*Fe(η(4)-C(10)H(8))](-) (1(-)) and [Cp*Fe(η(4)-C(14)H(10))](-) (2(-)) and reversibly oxidized to the cations [Cp*Fe(η(6)-C(10)H(8))](+) (1(+)) and [Cp*Fe(η(6)-C(14)H(10))](+) (2(+)). Reduced orbital charges and spin densities of the naphthalene complexes 1(-/0/+) and the anthracene derivatives 2(-/0/+) were obtained by density functional theory (DFT) methods. Analysis of these data suggests that the electronic structures of the anions 1(-) and 2(-) are best represented by low-spin Fe(II) ions coordinated by anionic Cp* and dianionic naphthalene and anthracene ligands. The electronic structures of the neutral complexes 1 and 2 may be described by a superposition of two resonance configurations which, on the one hand, involve a low-spin Fe(I) ion coordinated by the neutral naphthalene or anthracene ligand L, and, on the other hand, a low-spin Fe(II) ion coordinated to a ligand radical L(?-). Our study thus reveals the redox noninnocent character of the naphthalene and anthracene ligands, which effectively stabilize the iron atoms in a low formal, but significantly higher spectroscopic oxidation state.     

Synthesis of layered (2-D) V-based bimetallic oxalates from non-aqueous media that cannot be synthesized from aqueous media

The reaction of (NBu4)3[V(III)(ox)3] (1, ox = oxalate) and M(II) (M = Fe, Co, Ni, Cu) ions in MeCN, leads to the isolation of V-based coordination polymers of [N(n-Bu)4][Fe(II)V(II)I(ox)3].0.30[[N(n-Bu)4](BF4)] (2), [N(n-Bu)4][Co(II)V(III)(ox)3].0.75[[N(n-Bu)4](BF4)] (3), [N(n-Bu)4][Ni(II)V(III)(ox)3].0.20[[N(n-Bu)4](BF4)].0.20MeCN (4), and [N(n-Bu)4][Cu(II)V(III)(ox)2](BF4)2 (5) composition. Due to the lability of [V(III)(ox)3]3- to dissociate ox2-, these compounds cannot be prepared from aqueous media. 5 is best described as [N(n-Bu)4][V(III)Cu(II)(ox)2](BF4)2, and 2, 3, 4, and 5 are proposed to have a layered (2-D) motif for the MM(ox)x (x = 2, 3) extended framework. The [V(III)Cu(II)(ox)2] composition of 5 is reported for the first time for a bimetallic oxalate. 2 shows a weak antiferromagnetic interaction between Fe(II), S = 2 and V(III), S = 1 ions (theta = -9.4 K) within the 2-D layers. 3 and 5 do not magnetically order above 2 K. 4 magnetically order as ferromagnets below 2.55 K [taken as the onset of magnetization in chi'(T)], and has a glass transition temperature (chi'(max) at 1000 Hz) at 2.26 K.     

Synthesis, characterization, and electrochemical studies of beta,beta'-fused metallocenoporphyrins

Beta,beta'-Fused monoruthenocenylporphyrins, Cp*Ru(III)[1,2-[M(II)-5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)-porphyrinato]-3-methyl-cyclopentadienide] (M = Ni (20), Cu (21), Zn (22)), and bisferrocenoporphyrins, Fe(II) bis[1,2-[M(II)-5,10,15,20-tetraphenylporphyrinato]-3-methyl-cyclopentadienide] (M = Ni (24), Cu (25), Zn (26)), were synthesized and characterized. A novel synthetic approach to beta,beta'-fused porphyrins through Pd(0)-catalyzed [3 + 2] cycloaddition was implemented in this work. UV-vis spectra of these compounds show largely broadened and red-shifted bands (relative to their precursors) indicating potential electronic communication between the attached organometallic moiety and the porphyrin core. The electrochemistry of these molecules suggests significant electronic interactions between the metallocene and metalloporphyrin in molecules 20 and 24. The crystal structure of the bisferrocenoporphyrin 26, Fe(II) bis[1,2-[Zn(II)-5,10,15,20-tetraphenylporphyrinato]-3-methyl-cyclopentadienide], was determined: [Cp2Fe[ZnTPP(THF)]2][Cp2Fe[ZnTPP(THF)ZnTPP(MeOH)]].3MeOH.6THF, M = 3804.35, monoclinic, space group P21/c, a = 33.327(5) A, b = 19.145(3) A, c = 29.603(5) A, beta = 106.309(2) degrees , V = 18128(5) A3, Z = 4. In this molecule, one porphyrin ring is rotated by about 72 degrees with respect to the other in the 5-fold axis of the Cp ring.     

Electronic structure of mononuclear bis(1,2-diaryl-1,2-ethylenedithiolato)iron complexes containing a fifth cyanide or phosphite ligand: a combined experimental and computational study

A series of mononuclear square-based pyramidal complexes of iron containing two 1,2-diaryl-ethylene-1,2-dithiolate ligands in various oxidation levels has been synthesized. The reaction of the dinuclear species [Fe(III)2(1L*)2(1L)2]0, where (1L)2- is the closed shell di-(4-tert-butylphenyl)-1,2-ethylenedithiolate dianion and (1L*)1- is its one-electron-oxidized pi-radical monoanion, with [N(n-Bu)4]CN in toluene yields dark green crystals of mononuclear [N(n-Bu)4][Fe(II)(1L*)2(CN)] (1). The oxidation of 1 with ferrocenium hexafluorophosphate yields blue [Fe(III)(1L*)2(CN)] (1ox), and analogously, a reduction with [Cp2Co] yields [Cp2Co][N(n-Bu)4][Fe(II)(1L*)(1L)(CN)] (1red); oxidation of the neutral dimer with iodine gives [Fe(III)(1L*)2I] (2). The dimer reacts with the phosphite P(OCH3)3 to yield [Fe(II)(1L*)2{P(OCH3)3}] (3), and [Fe(III)2(3L*)2(3L)2] reacts with P(OC6H5)3 to give [Fe(II)(3L*)2{P(OC6H5)3}] (4), where (3L)2- represents 1,2-diphenyl-1,2-ethylenedithiolate(2-). Both 3 and 4 were electrochemically one-electron oxidized to the monocations 3ox and 4ox and reduced to the monoanions 3red and 4red. The structures of 1 and 4 have been determined by X-ray crystallography. All compounds have been studied by magnetic susceptibility measurements, X-band EPR, UV-vis, IR, and M?ssbauer spectroscopies. The following five-coordinate chromophores have been identified: (a) [Fe(III)(L*)2X]n, X = CN-, I- (n = 0) (1ox, 2); X = P(OR)3 (n = 1+) )3ox, 4ox) with St = 1/2, SFe = 3/2; (b) [Fe(II)(L*)2X]n, X = CN-, (n = 1-) (1); X = P(OR)3 (n = 0) (3, 4) with St = SFe = 0; (c) [Fe(II)(L*)(L)X]n <--> [Fe(II)(L)(L*)X]n, X = CN- (n = 2-) (1red); X = P(OR)3 (n = 1-) (3red, 4red) with St = 1/2, SFe = 0 (or 1). Complex 1ox displays spin crossover behavior: St = 1/2 <--> St = 3/2 with intrinsic spin-state change SFe = 3/2 <--> SFe = 5/2. The electronic structures of 1 and 1(ox) have been established by density functional theoretical calculations: [Fe(II)(1L*)2(CN)]1- (SFe = 0, St = 0) and [Fe(III)(1L*)2(CN)]0 (SFe = 3/2, St = 1/2).     

Spectroscopic study of (two-dimensional) molecule-based magnets: [M(II)(TCNE)(NCMe)2][SbF6] (M = Fe, Mn, Ni)

The M-[TCNE] (M = 3d metal; TCNE = tetracyanoethylene) system is one of the most interesting classes of molecule-based magnets, exhibiting a plethora of compositions and structures (inorganic polymer chains, 2D layers, 3D networks, and amorphous solids) with a wide range of magnetic ordering temperatures (up to 400 K). A systematic study of vibrational (both infrared and, for the first time, Raman) properties of the family of new TCNE-based magnets of M(II)(TCNE) (NCMe)(2)[SbF(6)] [M = Mn, Fe, Ni] composition is discussed in conjunction with their magnetic behavior and newly reso-lved crystal structures. The vibrational properties of the isolated TCNE(●-) anion in the paramagnetic Bu(4)N [TCNE(●-)] salt and recently characterized 2D layered magnet Fe(II)(TCNE)(NCMe)(2)[FeCl(4)] are also reported for comparison. Additionally, a linear correlation between ν(C=C) (a(g)) frequency of the TCNE ligand and its formal charge Z (the spin density on the π* orbital), Z = [1571 - ν(C=C) (a(g))]/154.5 [e], is presented. It is shown that monitoring Z by Raman spectroscopy is of great use in providing information that allows understanding the peculiarity of the superexchange interaction in M-[TCNE] magnets and establishing the structure-magnetic properties correlations in this class of magnetic material.     

Parametrization of the magnetic behavior of the triangular spin ladder chains organically templated: (C2N2H10)[M(HPO3)F3] (M(III) = Fe, Cr, and V). Crystal structure and thermal and spectroscopic properties of the iron(III) phase

A new iron(III) phosphite templated by ethylenediamine has been synthesized using solvothermal conditions under autogenous pressure. The (C2N2H10)[Fe(HPO3)F3] compound has been characterized by single-crystal X-ray diffraction data and spectroscopic and magnetic techniques. The crystal structure is formed by chains extended along the c axis and surrounded by ethylenediammonium cations. A study by diffuse-reflectance spectroscopy has been performed, and the calculated Dq, B, and C parameters for the Fe(III) cations are 1030, 720, and 3080 cm(-1), respectively. The M?ssbauer spectrum at room temperature is characteristic of Fe(III) ions. The electron spin resonance (ESR) spectra carried out at different temperatures show isotropic signals with a g value of 2.00(1). The thermal evolution of the intensity of the ESR signals indicates the existence of antiferromagnetic interactions for the Fe(III) phase. The magnetic susceptibility data of the Cr(III) and V(III) compounds show antiferromagnetic couplings. The J-exchange parameters of the Fe(III) and Cr(III) compounds have been calculated by using a model for a triangular spin ladder chain. The values are J1 = -1.63(1) K and J2 = -0.87(2) K with g = 2.02 for the Fe(III) phase and J(1) = -0.56(2) K and J2 = -0.40(2) K with g = 1.99 for the Cr(III) compound. In the case of the V(III) phase, the fit has been performed considering a linear chain with the magnetic parameters D = 2.5 cm(-1) and J = -1.15(1) K.     

Molecule-based magnets formed by bimetallic three-dimensional oxalate networks and chiral tris(bipyridyl) complex cations. The series [ZII(bpy)3][ClO4][MIICrIII(ox)3] (ZII = Ru, Fe, Co, and Ni; MII = Mn, Fe, Co, Ni, Cu, and Zn; ox = oxalate dianion)

The synthesis, structure, and physical properties of the series of molecular magnets formulated as [ZII(bpy)3][ClO4][MIICrIII(ox)3] (ZII = Ru, Fe, Co, and Ni; MII = Mn, Fe, Co, Ni, Cu, and Zn; ox = oxalate dianion) are presented. All the compounds are isostructural to the [Ru(bpy)3][ClO4][MnCr(ox)3] member whose structure (cubic space group P4(1)32 with a = 15.506(2) A, Z = 4) consists of a three-dimensional bimetallic network formed by alternating MII and CrIII ions connected by oxalate anions. The identical chirality (lambda in the solved crystal) of all the metallic centers determines the 3D chiral structure adopted by these compounds. The anionic 3D sublattice leaves some holes where the chiral [Z(bpy)3]2+ and ClO4- counterions are located. These compounds behave as soft ferromagnets with ordering temperatures up to 6.6 K and coercive fields up to 8 mT.     

Rational synthesis and characterization of the mixed-metal organometallic polyoxometalates [Cp*Mo(x)W(6-x)O18]- (x = 0, 1, 5, 6)

The reaction between the oxometallic complexes Cp*(2)M(2)O(5) and Na(2)M'O(4) (M, M' = Mo, W) in a 1:10 molar ratio in an acidic aqueous medium constitutes a mild and selective entry into the anionic Lindqvist-type hexametallic organometallic mixed oxides [Cp*Mo(x)W(6-x)O(18)](-) [x = 6 (1), 5 (2), 1 (3), 0 (4)]. All of these compounds have been isolated as salts of nBu(4)N(+) (a), nBu(4)P(+) (b), and Ph(4)P(+) (c) cations and two of them (1 and 3) also with the n-butylpyridinium (nBuPyr(+), d) cation. The compounds have been characterized by elemental analyses, thermogravimetric analyses, electrospray mass spectrometry, and IR spectroscopy. The molecular identity and geometry of compounds 1c, 2a, and 2c have been confirmed by single-crystal X-ray diffraction. Density functional theory calculations on models obtained by replacing Cp* with Cp (I-IV) have provided information on the assignment of the terminal M═O and bridging M-O-M vibrations.     

Dihydrogen to dihydride isomerization mechanism in [(C5Me5)FeH2(Ph2PCH2CH2PPh2)]+ through the experimental and theoretical analysis of kinetic isotope effects

The isomerization of complex [Cp*Fe(dppe)(eta2-H2)]+, generated in situ by low-temperature protonation of Cp*Fe(dppe)H with either HBF4 or CF3COOH, to the dihydride tautomer trans-[Cp*Fe(dppe)(H)2]+ is irreversible and follows first-order kinetics in the -10 to +15 degrees C range with Delta H double dagger = 21.6 +/- 0.8 kcal mol(-1) and DeltaS double dagger = 5 +/- 3 eu. The isomerization rate constant is essentially independent of the nature and quantity of a strong acid. Density functional theory (DFT) calculations on various models, including the complete system at both the quantum mechanics/molecular mechanics (QM/MM) and full QM levels, probe the relative importance of steric and electronic effects for the relative stability of the nonclassical and classical isomers and identify two likely isomerization mechanisms: a "direct" pathway involving simultaneous H-H bond breaking and cis-trans isomerization and a "via Cp" pathway involving agostic C5Me5H intermediates. Both pathways are characterized by activation energies in close correspondence with the experimental value (21.3 and 22.2 kcal mol(-1), respectively). Further kinetic studies were carried out for the Cp*Fe(dppe)H + CF3COOD and Cp*Fe(dppe)D + CF3COOD systems at 273 K. The [Cp*Fe(dppe)(eta2-HD)]+ complex establishes a very rapid isotope redistribution equilibrium with the eta2-H2 and eta2-D2 analogues. The equilibrium constant value (K = 3.3 +/- 0.3) indicates a significant equilibrium isotope effect. Simulation of the rate data provides access to the individual isomerization rate constants kHH, kHD, and kDD for the three isotopomers, yielding kinetic isotope effects: kHH/kHD = 1.24 +/- 0.01 and kHD/kDD = 1.58 +/- 0.01 (and, consequently, kHH/kDD = 1.96 +/- 0.02). The analysis of the DFT-calculated frequencies, using the [Cp*Fe(dhpe)H2]+ model system, for the [Cp*Fe(dhpe)(eta2-XY)]+ isotopomers as well as transition states for the "direct" (TSdir) and "via Cp" (TSrot) pathways (X = H, D) allowed the computation of the expected isotope effects. A comparison with the experiment strongly suggests that the mechanism occurs via the "direct" pathway for the present system, although the small difference in the calculated energy barriers suggests that the "via Cp" pathway may be preferred in other cases.