PVC与核壳结构聚丙烯酸酯及环氧树脂的共混增韧

研究发现由分段乳液聚合丙烯酸丁酯、甲基丙烯酸甲酯、甲基丙烯酸缩水甘油酯制备的三层核壳结构共聚体和少量环氧树脂(含固化剂及促进剂)与PVC在适当配比下共混,可使改性PVC的抗冲击性能明显提高。考察了共混体系的组成与其冲击强度及断裂形态之间的关系。     

环氧树脂增韧改性的研究进展

概述了近年来互穿聚合物网络（IPN）、刚性粒子增韧环氧树脂的研究现状,并展望了环氧树脂增韧改性研究的前景。     

Synthesis of Bio-based Epoxy Containing Phosphine Oxide as a Reactive Additive Toward Highly Toughened and Fire-retarded Epoxy Resins

The integration of high mechanical toughness, impact strength as well as excellent flame-retardant properties toward epoxy resins(EPs) have always been a dilemma. The inadequate overall performance of EPs severely restricts their sustainable utilization in engineering aspects over long-term. Herein, a new bio-based agent(diglycidyl ether of magnolol phosphine oxide, referred as DGEMP) derived from magnolol(classified as lignan), extracted from natural plants Magnolia officinalis, was successfull...     

含柔性间隔基的扩链脲潜伏性固化、增韧环氧树脂性能研究

合成了含聚乙二醇柔性问隔基的扩链脲(U_i),并对其与环氧树/二苄胺混合体系的反应活性、贮存性能、动态力学性能及抗冲击性能进行了研究.结果表明:环氧树脂/扩链脲/二苄胺混合体系在323K下贮存期可达40h,其固化物抗冲击强度最高可达55.8kJ/m²,较环氧树脂/小分子取代脲(U₀)/二苄胺混合体系提高近5倍.     

分子烙印聚合物作为高效毛细管电泳添加剂的研究

分子洛印聚合物（molecular imprinted polymer)是一种高选择的有分子记忆效应的主体分子,通常在非极性环境中制备和应用。该文在极性溶剂中利用离子化作用和疏水作用制备了非共价的分子烙印聚合物,并将其作为高效毛细管电泳流动相添加剂;在含水缓冲溶液条件下,研究了单体种类、分子烙印聚合物颗粒度和含量、缓冲溶液pH值以及分离电压对分子烙印聚合物识别模板分子的影响。结果证明了在质子溶剂中制备和应用非共价分子烙印聚合物是可行的。     

Epoxy as a reactive plasticizer for improving polycarbonate processibility

An oligomer of a diepoxy (diglycidyl ether of bisphenol-A, DGEBA) and an aromatic diamine (MCDEA) have been used as reactive plasticizers for polycarbonate (PC). A small amount of PC chain scission occurred during this blending process, probably due to transesterification of the PC carbonate group by the hydroxyl group of the DGEBA oligomer. Addition of DGEBA to PC was found to greatly reduce the T_g and processing temperature. Dynamic rheology measurements showed that the added epoxy can very effectively reduce the viscosity, but that the addition of epoxy also accelerated the crystallisation rate of the PC, which was confirmed by XRD, optical transmission microscopy and DMTA. The DMTA results of cured blends also showed that this crystallization of the PC enhanced their heat resistance properties. Sol–gel studies of the cured samples showed that some of the PC was grafted to the crosslinked epoxy network. Studies of the rubbery behaviour, solvent resistance of the cured blend and SEM images suggest that PC is the main continuous phase in the matrix and that the epoxy phase is mainly dispersed as sub-micron particles in the matrix.     

Application of Modified Natural Oils as Reactive Diluents for Epoxy Resins

Bisphenol A based low-molecular-weight epoxy resin was modified with epoxidized soybean oil, which exhibit viscosity reducing ability comparable to commercial grade active diluents. The studied compositions showed a non-Newtonian rheological behavior, typical for Bingham liquids. The values of the flow index (n) and the consistency index (k) for the compositions tested in the temperature range 25–65 °C were calculated from the Ostwald-de Waele rheological model and were used to calculate the flow-activation energy (E_a) using the Arhenius equation. Studies of co-crosslinking of mixed oil-resin compositions using isophorone diamine showed essential decrease of the reaction heat and peak maximum temperature. Mechanical properties, thermal stability, water absorption and chemical resistance of the epoxy resin modified with natural oil, were also investigated. Compositions of epoxy resin Ruetapox 0162, modified with the oil diluent, preserved very good mechanical properties of the epoxy resins and demonstrated relatively low water absorption as well as high chemical resistance. The compositions displayed even higher impact strength than pure epoxy resin due to plasticizing effect of the built-in oil. Compositions with the high contents (up to 60 weight %) of the oil were flexible materials with fast elastic recovery.     

S掺杂Fe-N-C高活性氧还原反应催化剂

采用微波加热和高温碳化技术, 以ZIF-8为前驱体, 在甲醇-水双溶剂体系中先后引入Fe(NO₃)₃·9H₂O和KSCN, 制备了一系列S掺杂的Fe-N-C催化剂（Fe₃C/Fe-SAS@SNC）, 并通过X射线粉末衍射、 扫描透射电子显微镜和氮气吸附-脱附测试等表征手段进行分析. 结果表明, Fe和S两种元素的合理掺杂使Fe₃C/Fe-SAS@SNC催化剂具有明显的分级多孔结构, 比表面积达到673 m²/g, 在酸、 碱电解质中均表现出了优异的氧还原催化性能. 在0.1 mol/L KOH中, Fe₃C/Fe-SAS@SNC催化剂的半波电位达到0.880 V(vs. RHE), 高于商业Pt/C催化剂, 且表现出了比商业Pt/C更优的稳定性. 在0.5 mol/L H₂SO₄中, Fe₃C/Fe-SAS@SNC电催化氧还原的性能也与商业Pt/C催化剂相当.     

Anthranoxides as Highly Reactive Arynophiles for the Synthesis of Triptycenes

We report herein an efficient method to synthesize triptycenes by the reaction of benzynes and anthranoxides, which are electron-rich and readily prepared from the corresponding anthrones. Using this method, 1,9-syn-substituted triptycenes were regioselectively obtained employing 3-methoxybenzynes. This method was also applied to synthesize pentiptycenes. A DFT study revealed that the cycloaddition of lithium anthranoxide and benzyne proceeds stepwise.     

3, 4-乙烯二氧噻吩单体用作锂离子电池安全性改善添加剂的研究

安全性是制约锂离子电池向电动汽车领域应用拓展的主要障碍. 本工作提出了一种能够有效改善锂离子电池安全性的电解液添加剂-3,4-乙烯二氧噻吩单体（EDOT）,研究了其在有机电解液中的电氧化聚合行为,以及对LiCoO₂电极高温热行为和电池安全性、电化学性能的影响. 循环伏安（CV）和透射电镜（TEM）表征结果表明,单体添加剂能够在电池充电过程发生电氧化聚合,在正极表面形成一层聚（3,4-乙烯二氧噻吩）（PEDOT）导电聚合物膜;差示扫描量热（DSC）分析结果显示,PEDOT隔离了电解液与正极表面的直接接触,减少了过热条件下电解液在正极表面的分解放热. 安全性测试结果表明,在电解液中仅添加0.1%的EDOT单体,即可将电池在150 ^oC高温热冲击下发生热失控的时间推迟13.8分钟. 电化学性能测试结果表明,聚合产物良好的电子导电性能有效改善正极的电子传导能力,在一定程度上提高电池的倍率性能和循环稳定性,而容量、低温性能等基本不受影响,展示出良好的应用前景.     

Reactive rubbers as toughening agents for thermoset polyester resins. Molecular analysis by FTIR and fracture behavior of the resulting blends

A reactive rubber obtained by isocyanation of hydroxyl-terminated polybutadiene was used as toughening agent for an unsaturated polyester resin. Both the isocyanation and the successive reaction between the modified rubber and the polyester were investigated by Fourier-transform infrared spectroscopy (FTIR). Fracture measurements at high and low strain rate were carried out on the cured materials to test their toughness. The failure mechanisms were established by morphological analysis of fractured surfaces, performed by scanning electron microscopy. © 1993 John Wiley & Sons, Inc.     

利用ZnO@ZIF-8核壳结构构建高选择性、高稳定性的Pd/ZnO催化剂用于CO2加氢制甲醇

Catalytic CO₂ hydrogenation to methanol is a promising route to mitigate the negative effects of anthropogenic CO₂. To develop an efficient Pd/ZnO catalyst, increasing the contact between Pd and ZnO is of the utmost importance, because naked Pd favors CO production via the reverse water-gas shift path. Here, we have utilized a ZnO@ZIF-8 core-shell structure to synthesize Pd/ZnO catalysts via Pd immobilization and calcination. The merit of this method is that the porous outer layer can offer abundant guest rooms for Pd, ensuring intimate contact between Pd and the post-generated ZnO. The synthesized Pd/ZnO catalysts (PZZ8-T, T denotes the temperature of calcination in degree Celsius) is compared with a ZnO nanorod-immobilized Pd catalyst (PZ). When the catalytic reaction was performed at lower reaction temperatures (250, 270, and 290 ℃), the highest methanol space time yield (STY) and highest STY per Pd achieved by PZ at 290 ℃ were 0.465 g g_cat^-1 h^-1 and 13.0 g g_Pd^-1 h^-1, respectively. However, all the PZZ8-T catalysts exhibited methanol selectivity values greater than 67.0% at 290 ℃, in sharp contrast to a methanol selectivity value of 32.8% for PZ at the same temperature. Thus, we performed additional investigations of the PZZ8-T catalysts at 310 and 360 ℃, which are unusually high temperatures for CO₂ hydrogenation to methanol because the required endothermic reaction is expected to be severely inhibited at such high temperatures. Interestingly, the PZZ8-T catalysts were observed to achieve a methanol selectivity value of approximately 60% at 310 ℃, and PZZ8-400 was observed to maintain a methanol selectivity value of 51.9% even at a temperature of 360 ℃. Thus, PZZ8-400 attains the highest methanol STY of 0.571 g g_cat^-1 h^-1at 310 ℃. For a better understanding of the structure-performance relationship, we characterized the catalysts using different techniques, focusing especially on the surface properties. X-ray photoelectron spectroscopy (XPS) results indicated a linear relationship between the methanol selectivity and the surface PdZn : Pd ratio, proving that the surface PdZn phase is the active site for CO₂ hydrogenation to methanol. Furthermore, analysis of the XPS O 1s spectrum together with the electronic paramagnetic resonance results revealed that both, the oxygen vacancy as well as the ZnO polar surface, played important roles in CO₂ activation. Chemisorption techniques provided further quantitative and qualitative information regarding the Pd-ZnO interface that is closely related to the CO₂ conversion rate. We believe that our results can provide insight into the catalytic reaction of CO₂ hydrogenation from the perspective of surface science. In addition, this work is an illustrative example of the use of novel chemical structures in the fabrication of superior catalysts using a traditional formula.     

Inspired by Grape Seed and Wine: Tannic Acid as a Modified Coating for Fabricating Highly Flexible,Transparent and Conductive Film

The application of transparent conductive films in flexible electronics has shown promising prospects recently. Tannic acid(TA) was successfully applied to modifying the surface of polydimethylsiloxane(PDMS) to fhbricate highly flexible, transparent and conductive Ag nanowires(NWs) based films. TA modification transformed the PDMS surface from hydrophobicity into hydrophilicity without decreasing the transparence. A sheet resistance(Rs) of 80 Ω/cm^2 with an optical transmittance of 94% was achieved, which was superior to that of indium tin oxide(ITO) films. More importantly, the TA layer enhanced the interaction between Ag NWs and the PDMS substrate. The Ag NWs films on TA modified PDMS substrate exhibited excellent stability in Rs when subjected to a bending test.     

Oil‐Soluble Polymer Brush Grafted Nanoparticles as Effective Lubricant Additives for Friction and Wear Reduction

The development of high performance lubricants has been driven by increasingly growing industrial demands and environmental concerns. Herein, we demonstrate oil‐soluble polymer brush‐grafted inorganic nanoparticles (hairy NPs) as highly effective lubricant additives for friction and wear reduction. A series of oil‐miscible poly(lauryl methacrylate) brush‐grafted silica and titania NPs were synthesized by surface‐initiated atom transfer radical polymerization. These hairy NPs showed exceptional stability in poly(alphaolefin) (PAO) base oil; no change in transparency was observed after being kept at ?20, 22, and 100 °C for ≥55 days. High‐contact stress ball‐on‐flat reciprocating sliding tribological tests at 100 °C showed that addition of 1 wt % of hairy NPs into PAO led to significant reductions in coefficient of friction (up to ≈40 %) and wear volume (up to ≈90 %). The excellent lubricating properties of hairy NPs were further elucidated by the characterization of the tribofilm formed on the flat. These hairy NPs represent a new type of lubricating oil additives with high efficiency in friction and wear reduction.     

p-Substituted Tris(2-pyridylmethyl)amines as Ligands for Highly Active ATRP Catalysts: Facile Synthesis and Characterization

A facile and efficient two-step synthesis of p-substituted tris(2-pyridylmethyl)amine (TPMA) ligands to form Cu complexes with the highest activity to date in atom transfer radical polymerization (ATRP) is presented. In the divergent synthesis, p-Cl substituents in tris(4-chloro-2-pyridylmethyl)amine (TPMA^3Cl) were replaced in one step and high yield by electron-donating cyclic amines (pyrrolidine (TPMA^PYR), piperidine (TPMA^PIP), and morpholine (TPMA^MOR)) by nucleophilic aromatic substitution. The [Cu^II(TPMA^NR2)Br]⁺ complexes exhibited larger energy gaps between frontier molecular orbitals and >0.2 V more negative reduction potentials than [Cu^II(TPMA)Br]⁺, indicating >3 orders of magnitude higher ATRP activity. [Cu^I(TPMA^PYR)]⁺ exhibited the highest reported activity for Br-capped acrylate chain ends in DMF, and moderate activity toward C−F bonds at room temperature. ATRP of n-butyl acrylate using only 10–25 part per million loadings of [Cu^II(TPMA^NR2)Br]⁺ exhibited excellent control.     

B(C6F5)3 as a Highly Effective Catalyst for the Phosphoryl Transfer Reaction

The phosphoryl transfer reactions of diphenyl chlorophosphate with a wide range of alcohols were catalyzed by tris(pentafluorophenyl)boron [B(C₆F₅)₃], giving the corresponding phosphate esters in excellent yields. This methodology has advantages over older ones because it employs the easily handled B(C₆F₅)₃, avoids the side reaction, and has shorter reaction time.     

Ruthenium Nanoparticles on Nano‐Level‐Controlled Carbon Supports as Highly Effective Catalysts for Arene Hydrogenation

The reaction of three types of carbon nanofibers (CNFs; platelet: CNF‐P, tubular: CNF‐T, herringbone: CNF‐H) with [Ru₃(CO)₁₂] in toluene heated at reflux provided the corresponding CNF‐supported ruthenium nanoparticles, Ru/CNFs (Ru content=1.1–3.8 wt %). TEM studies of these Ru/CNFs revealed that size‐controlled Ru nanoparticles (2–4 nm) exist on the CNFs, and that their location was dependent on the surface nanostructures of the CNFs: on the edge of the graphite layers (CNF‐P), in the tubes and on the surface (CNF‐T), and between the layers and on the edge (CNF‐H). Among these Ru/CNFs, Ru/CNF‐P showed excellent catalytic activity towards hydrogenation of toluene with high reproducibility; the reaction proceeded without leaching of the Ru species, and the catalyst was reusable. The total turnover number of the five recycling experiments for toluene hydrogenation reached over 180 000 (mol toluene) (mol Ru)^?1. Ru/CNF‐P was also effective for the hydrogenation of functionalized benzene derivatives and pyridine. Hydrogenolysis of benzylic C? O and C? N bonds has not yet been observed. Use of poly(ethylene glycol)s (PEGs) as a solvent made possible the biphasic catalytic hydrogenation of toluene. After the reaction, the methylcyclohexane formed was separated by decantation without contamination of the ruthenium species and PEG. The insoluble PEG phase containing all of the Ru/CNF was recoverable and reusable as the catalyst without loss of activity.     

Xantphos Doped POPs‐PPh3 as Heterogeneous Ligand for Cobalt‐Catalyzed Highly Regio‐ and Stereoselective Hydrosilylation of Alkynes

A Co(acac)₂/POL‐Xantphos@10PPh₃‐catalyzed hydrosilylation of unsymmetrical internal alkynes with Ph₂SiH₂ has been developed for the synthesis of highly selective syn‐α‐vinylsilane products. Furthermore, terminal alkynes were also used and gave the products with excellent regioselectivity and a wide functional group tolerance. Because this porous organic polymer combines the selectivity and activity merits of Xantphos with the stability advantage derived from the high concentration of PPh₃, the Co(acac)₂/POL‐Xantphos@10PPh₃ can be recycled multiple times without loss of activity and selectivity. This heterogeneous catalyst is expected to find promising applications in industrial synthesis.     

A Recyclable and Highly Effective ZnO-beta Zeolite as a Catalyst for One-pot Three-Component Synthesis of Tetrahydrobenzo[b]pyrans

4H‐Benzo[b]pyrans was synthesized under reflux condition in ethanol via condensation of benzaldehyde, malononitrile and dimedone with ZnO‐beta zeolite as an inexpensive and effective catalyst. The key features of the reported protocols are good to excellent yields, short reaction time and recovery and reusability of catalytic material.