Fluorescence study of the solvation of fluorescent probes prodan and laurdan in poly(epsilon-caprolactone)-block-poly(ethylene oxide) vesicles in aqueous solutions with tetrahydrofurane

Steady-state and time-resolved fluorescence measurements were used to study the relaxation of the microenvironment of hydrophobic probes 6-propionyl-2-(dimethylamino)naphthalene (prodan) and 6-dodecanoyl-2-(dimethylamino)naphthalene (laurdan) in systems containing vesicles formed by the amphiphilic diblock copolymer poly(epsilon-caprolactone)-block-poly(ethylene oxide) (PCL-PEO) and water/tetrahydrofurane (THF) solvent mixtures. It was found that in case of prodan, both steady-state and time-resolved emission spectra were composed of two subspectra corresponding to the emission of prodan molecules located (i) in fairly rigid (effectively viscous) and hydrophobic domains of the vesicles close to the PCL/PEO interface and (ii) in a more polar and less viscous medium (in the bulk solution). The fraction of the emission from the more polar microenvironment increases with increasing content of THF in the system. Laurdan, in contrast to prodan, appeared to be solubilized preferentially in the hydrophobic domains up to 30 vol % of THF content, and its emission spectra changed only due to swelling of hydrophobic PCL domains by added THF. The study shows that the analysis of the time-resolved emission from a probe distributed in two media is, in principle, possible, but it is quite complex and appreciably less accurate, and the relaxation times are ill-defined averages of several processes. The bimodal or shoulder-containing time-resolved spectra have to be decomposed in pertinent time-resolved subspectra and treated separately. Another important result of the study is a piece of knowledge concerning the motion of the probe with respect to the vesicle. In the studied complex system, not only the relaxation of the solvent and reorganization of polymer segments around the fluorescent headgroup of the probe affect the emission but also a lateral motion of the probe with respect to the nanoparticle within the lifetime of the excited state contributes significantly to the relaxation and to the relatively slow time-resolved Stokes shift.     

Aggregation-induced emission-active antibacterial hydrogel with self-indicating ability for real-time monitoring of drug release process

Although antibacterial hydrogels are emerging as promising biomaterials for effective inhibition of bacterial infections, monitoring their dynamic release behaviors in a visual manner remains greatly challenging. Herein, non-conjugated luminescent polymers (NCLPs) with aggregation-induced emission (AIE) characteristics are used for the first time to develop a visualization strategy to monitor the release process of the drug-loaded hydrogel. The novel antimicrobial peptide polymers with intrinsic AIE effect, namely nanoengineered peptide-grafted hyperbranched polymers (NPGHPs), are encapsulated in an anionic polyelectrolyte to construct the AIE-active fluorescent polymeric hydrogel (NPGHPs/SA gel). Interestingly, the rigid environment mediated by hydrogen bonding and electrostatic interaction contributes to promoting the unconventional luminescence of fluorescent clusters. Moreover, the successive drug release process of NPGHPs/SA gel can be tracked in real time by using fluorescence microscopy. The hydrogel also has potent antibacterial activities against Gram-negative bacteria (E. coli, P. aeruginosa) and Gram-positive bacteria (S. aureus, B. subtilis). Overall, this work not only provides an advanced biomedical material with broad-spectrum antibacterial ability but also opens a facile avenue up for the investigation of drug release from gel systems.     

Planar block copolymer membranes by vesicle spreading

An easy route to planar solid-supported polymer membranes by vesicle spreading is described. Pre-organized poly(butadiene)-block-poly(ethylene oxide)(PB-PEO) assemblies were spread on two different supports, i.e. strongly hydrophilic glass surfaces and ultrasmooth gold substrates. Polymer membranes were produced on a hydrophilic support by spreading hydroxyl-functionalized polymer vesicles, while covalently immobilized polymer membranes were obtained by spreading LA-functionalized polymer vesicles on gold substrates. Covalently bound membranes were further incubated with the peptide polymyxin B. Interactions with the polymer membrane were detected by EIS. These systems are of great interest to fundamental membrane science and have potential in technological applications, such as drug screening and (bio)sensing.     

Real-time membrane fusion of giant polymer vesicles

Membrane fusion is very important for the formation of many complex organs in metazoans throughout evolution, such as muscles, bones, and placentae. Lipid vesicles (liposomes) are frequently used as model membranes to study the fusion process. This work demonstrates for the first time the real-time membrane fusion of giant polymer vesicles by directly displaying a series of high-resolution and real-time transformation images of individual vesicles. The fusion process includes the sequential steps of membrane contact, forming the center wall, symmetric expansion of fusion pore and complete fusion, undergoing the intermediates of "8" shape with a protruding rim at the contact site, peanut (pear) shape, and oblate sphere. The vesicle swells during fusion, and the fusing vesicle only deforms in the neck domain around the fusion pore in the lateral direction, which verifies the importance of the lateral tension on the fusion pore at the vesicle deformation level. The successful fusion of the synthetic and protein-free polymer vesicles reported here also supports that vesicle proximity combined with membrane perturbation suffices to induce membrane fusion, and that the protein is not necessary for the fusion process.     

Cytomimetic large-scale vesicle aggregation and fusion based on host-guest interaction

Herein, we have shown a large-scale cell-mimetic (cytomimetic) aggregation process by using cell-sized polymer vesicles as the building blocks and intervesicular host-guest molecular recognition interactions as the driving force. We first prepared the hyperbranched polymer vesicles named branched polymersomes (BPs) around 5-10 μm through the aqueous self-assembly of a hyperbranched multiarm copolymer of HBPO-star-PEO [HBPO = hyperbranched poly(3-ethyl-3-oxetanemethanol); PEO = poly(ethylene oxide)]. Subsequently, adamantane-functionalized BPs (Ada-BPs) or β-cyclodextrin-functionalized BPs (CD-BPs) were prepared through the coassembly of HBPO-star-PEO and Ada-modified HBPO-star-PEO (HBPO-star-PEO-Ada), or of HBPO-star-PEO and CD-modified HBPO-star-PEO (HBPO-star-PEO-CD), respectively. Macroscopic vesicle aggregates were obtained by mixing CD-BPs and Ada-BPs. The intervesicular host-guest recognition interactions between β-CD units in CD-BPs and Ada units in Ada-BPs, which were proved by (1)H nuclear Overhauser effect spectroscopy (NOESY) spectrum and the fluorescence probe method, are responsible for the vesicle aggregation. Additionally, the vesicle fusion events happened frequently in the process of vesicle aggregation, which were certified by double-labeling fluorescent assay, real-time observation, content mixing assay, and component mixing assay.     

基于聚集诱导发光荧光探针的细胞成像研究进展

荧光探针是化学传感技术领域在20世纪末的一项重大发现,具有合成简单、灵敏度高、选择性好、响应时间短、可视化高等优点。 将具有聚集诱导发光现象(AIE)特征的荧光基团与具有生物相容性的高分子结合起来,使得荧光材料具有毒性低、光稳定性好、生物相容性好等特点。 在分子、离子检测和细胞成像技术中得到广泛的研究和应用。 本文综述了细胞质成像、细胞膜成像、线粒体成像、溶酶体成像、脂滴成像、细胞核成像、细胞核和线粒体双靶向性成像的荧光探针,并对其应用前景做了展望。     

Direct formation of giant vesicles from synthetic polypeptides

This report describes direct formation of giant vesicles from a series of poly(L-lysine)-block-poly(L-phenylalanine) (PLL-b-PPA) block copolymers from their water solution. These polymers are prepared by successive ring-opening polymerization (ROP) of the two alpha-amino acid N-carboxyanhydrides and then removing the side chain protecting groups by acidolysis. The structures of the copolymers are confirmed by nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and size exclusion chromatography (SEC). The vesicles are studied by atomic force microscopy (AFM), field emission scanning electron microscopy (ESEM), and confocal laser scanning microscopy (CLSM). Rhodamine B is used as a fluorescent probe to confirm the existence of the vesicle with an aqueous interior. The vesicle size is in the range 0.55-6 microm, depending on the absolute and relative lengths of the two blocks, on initial polymer concentration, and on solution pH. The vesicles are still stable in water for 2 months after preparation. Addition of the copolymer to DNA solution results in complex formation with it. The complex assumes the morphology of irregular particles of less than 2 microm. It is expected to be used in drug and gene delivery.     

Preparation of primary amine-based block copolymer vesicles by direct dissolution in water and subsequent stabilization by sol-gel chemistry

A new amphiphilic biocompatible diblock copolymer, poly(epsilon-caprolactone)-block-poly(2-aminoethyl methacrylate), PCL-b-PAMA, was synthesized in three steps by (i) ring-opening polymerization of epsilon-caprolactone, (ii) end-group modification by esterification, and (iii) atom transfer radical polymerization (ATRP) of 2-aminoethyl methacrylate hydrochloride (AMA) in its hydrochloride salt form. This copolymer forms block copolymer vesicles with the hydrophobic PCL block forming the vesicle membrane. Unusually, these vesicles are easily prepared by direct dissolution in water without using organic co-solvents, pH adjustment, or even stirring. These vesicles can be stabilized by aqueous sol-gel chemistry using tetramethyl orthosilicate (TMOS) as the silica precursor. It is well-known that cationic polymers can catalyze silica formation, but in this particular case, it seems that the TMOS precursor is solubilized within the hydrophobic PCL membrane. Thus, the neutral membrane actually directs silica formation, rather than the cationic PAMA chains. The final vesicle morphology and the silica content depend on the silicification conditions. Provided that the TMOS/AMA molar ratio does not exceed 10:1, silicification is solely confined within the PCL membrane. At higher ratios, silica nanoparticles (5-12 nm) are also observed on the outer surface of the silicified vesicles. However, these nanoparticles appear to be only weakly adsorbed, since they can be easily removed by dialysis. The mean hydrodynamic diameter of the silicified vesicles varies from 175 to 205 nm with solution pH due to (de)protonation of the externally expressed PAMA chains. Calcination of the silicified vesicles at 800 degrees C leads to the formation of hollow silica particles. 1H NMR, transmission electron microscopy (TEM), dynamic light scattering (DLS), aqueous electrophoresis, and thermogravimetric analysis (TGA) were employed to characterize the vesicles, both before and after silicification.     

pH-responsive vesicles based on a hydrolytically self-cross-linkable copolymer

A new type of shape-persistent, pH-responsive vesicle was prepared by the self-assembly of a novel poly(ethylene oxide)-block-poly[2-(diethylamino)ethyl methacrylate-stat-3-(trimethoxysilyl)propyl methacrylate], PEO-b-P(DEA-stat-TMSPMA), copolymer. Vesicles were formed spontaneously in aqueous THF solution, with the hydrophilic PEO chains forming the corona and the pH-sensitive P(DEA-stat-TMSPMA) blocks being located in the membrane walls. Hydrolytic cross-linking within the hydrophobic membrane walls fixed the vesicle morphology. The resulting colloidally stable vesicles were characterized by 1H NMR, transmission electron microscopy (TEM), dynamic laser light scattering (DLS), and stopped-flow fluorescence experiments. The latter technique indicated that the permeability of the vesicle walls was sensitive to the pH of the aqueous solution, as expected. Gold-decorated vesicles were obtained by in situ reduction of AuCl4- anions to produce gold nanoparticles within the vesicle walls. (Yellow, hydrophilic PEO; green, pH-responsive DEA residues; blue, hydrolytically self-cross-linkable TMSPMA residues.)     

Preparation of water dispersible poly(methyl methacrylate)-based vesicles for facile persistent antibacterial applications

We report a facile strategy for incorporating persistent and effective antibacterial property into a widely used polymer, poly(methyl methacrylate)(PMMA), by copolymerizing methyl methacrylate(MMA) with 2-(tert-butylamino)ethyl methacrylate(TA) in one pot via atom transfer radical polymerization(ATRP). The subsequent self-assembly of the resultant poly(methyl methacrylate)-block-poly[(2-tert-butylamino)ethyl methacrylate](PMMA20-b-PTA15) diblock copolymer affords well-defined water-dispersible vesicles, which can be facilely sprayed on the walls in hospitals for effective inhibition and killing of bacteria. 1H-NMR and gel permeation chromatography(GPC) studies confirmed the successful synthesis of welldefined copolymer. Transmission electron microscopy(TEM), atomic force microscopy(AFM) and dynamic light scattering(DLS) studies proved the formation of vesicles with narrow size distribution. DLS studies revealed the excellent stability of vesicles at various temperatures. Antibacterial tests showed effective antibacterial activities of polymer vesicles against both Gram-positive and Gram-negative bacteria. Moreover, this strategy may be extended for preparing a wide range of polymeric materials for facile antibacterial applications in many fields.     

Fluorescence probe techniques to monitor protein adsorption-induced conformation changes on biodegradable polymers

The study of protein adsorption and any associated conformational changes on interaction with biomaterials is of great importance in the area of implants and tissue constructs. This study aimed to evaluate some fluorescent techniques to probe protein conformation on a selection of biodegradable polymers currently under investigation for biomedical applications. Because of the fluorescence emanating from the polymers, the use of monitoring intrinsic protein fluorescence was precluded. A highly solvatochromic fluorescent dye, Nile red, and a well-known protein label, fluorescein isothiocyanate, were employed to study the adsorption of serum albumin to polycaprolactone and to some extent also to two starch-containing polymer blends (SPCL and SEVA-C). A variety of fluorescence techniques, steady state, time resolved, and imaging were employed. Nile red was found to leach from the protein, while fluorescein isothiocyanate proved useful in elucidating a conformational change in the protein and the observation of protein aggregates adsorbed to the polymer surface. These effects were seen by making use of the phenomenon of energy migration between the fluorescent tags to monitor interprobe distance and the use of fluorescence lifetime imaging to ascertain the surface packing of the protein on polymer.     

The effect of polymer chain length and surface density on the adhesiveness of functionalized polymersomes

Giant cell-like polymer vesicles, polymersomes, made from the diblock copolymer poly(ethylene oxide)-polybutadiene (PEO-PBD), have bilayer structures similar to the cell membrane but have superior and tunable properties for storage and stability. We have modified the terminal hydroxyl of the hydrophilic block with biotin-lysine (biocytin), a biologically derived group that imparts specific adhesiveness to a polymer colloid coated with avidin. The functionalized polymer will form vesicles, either on its own or when mixed with unmodified block copolymers that also form vesicles. The incorporation and mixing of the functionalized polymer into vesicle bilayers is measured using a fluorescent version ofbiocytin with confocal microscopy. The fluorescence signal associated with the vesicle is in proportion with the concentration of functional polymer added during vesicle construction. The adhesiveness of polymer vesicles containing functionalized biotinylated polymer to avidin coated microspheres is measured with micropipet aspiration. Two types of polymer vesicles were constructed: one where the functionalized polymer (molecular weight (MW), 10400 Da) was longer than the surrounding unfunctionalized polymer (MW, 3600 Da) and one where the functionalized polymer (MW, 10400 Da) was the same length as the unfunctionalized polymer. In all cases, the avidin-biotin bonds form kinetically trapped crossbridges that impart little tension as they form but require significantly more tension to break. The relative length of the functionalized polymer on the surface of the vesicle is an important determinant for the adhesion of a polymer vesicle but not for the adsorption of soluble avidin. Greater adhesion strengths are seen where the functionalized polymer is longer than the surrounding polymer. The concentration of functionalized polymer at which adhesion is maximal depends on the relative lengths of the polymers. When the functionalized polymer is the same length as the surface brush of the polymersome membrane, the critical tension is maximal at 10 mol % functionalized polymer concentration. However, when the biocytin groups are attached to a polymer which is larger than the surface brush, the critical tension is maximal at 55 mol % functionalized polymer. These results indicate that polymer mixing and length can control the interfacial adhesion of polymer brushes and must be understood to tune polymersome adhesiveness.     

Membrane protrusion coarsening and nanotubulation within giant unilamellar vesicles

Hydrophobic side groups on a stimuli-responsive polymer, encapsulated within a single giant unilamellar vesicle, enable membrane attachment during compartment formation at elevated temperatures. We thermally modulated the vesicle through implementation of an IR laser via an optical fiber, enabling localized directed heating. Polymer-membrane interactions were monitored using confocal imaging techniques as subsequent membrane protrusions occurred and lipid nanotubes formed in response to the polymer hydrogel contraction. These nanotubes, bridging the vesicle membrane to the contracting hydrogel, were retained on the surface of the polymer compartment, where they were transformed into smaller vesicles in a process reminiscent of cellular endocytosis. This development of a synthetic vesicle system containing a stimuli-responsive polymer could lead to a new platform for studying inter/intramembrane transport through lipid nanotubes.     

Synthesis and characterization of PISOZ-PDMS-PISOZ triblock polymer vesicles

In this project, we synthesized poly(2-isopropyl-2-oxazoline)-block- poly(dimethyl-siloxane)-block-poly(2-isopropyl-2-oxazoline) (PISOZ-PDMS-PISOZ) triblock polymer, which has been prepared as vesicles. The triblock polymer was characterized by ¹H-NMR, F-NMR, LS and TEM. The size of the empty vesicle is about 60 nm. When curcumin was encapsulated into PISOZ-PDMS-PISOZ triblock polymer, formed well defined vesicles in a size about 70 nm.     

A nanoscale vesicular polydiacetylene sensor for organic amines by fluorescence recovery

We report a nanoscale lipid membrane-based sensor of conjugated polydiacetylene (PDA) vesicles for fluorescence detection of organic amines. The vesicle sensor was constructed by incorporation of a BODIPY fluorescent dye into the PDA vesicles. The fluorescent properties of the resulting vesicles can be manipulated by adjusting lipid components, and are controlled by environmental and solution conditions. The fluorescence of the BODIPY dye was significantly quenched in the polymerization of diacetylene lipid vesicles by a UV irradiation process. However, it was sufficiently recovered by external stimuli such as a hike of solution pH. The fluorescence recovery process was reversible, and a decrease in solution pH resulted in repeated quenching. The reported system transforms an external stimulus into a large fluorescence intensity change, demonstrating great potential in developing new signal reporting method for biosensor design. The quench-recovery phenomenon of the BODIPY-PDA is believed to be related to the energy transfer between the dye and the PDA conjugate backbone. The vesicle sensor was applied for detecting an organic amine, triethylamine (TEA) and a large linear relationship was obtained between the increase in fluorescence intensity and the concentrations of TEA. The detection limit of TEA by vesicle sensors using fluorescence recovery was found to be 10 μM.     

Reactive block copolymer vesicles with an epoxy wall

Recently, block copolymer vesicles have attracted considerable attention because of their properties in encapsulation and release. To explore their applications in biorelated fields, functionalization of the polymer vesicle is necessary. Herein, a reactive unilamellar vesicle is reported by self-assembly of poly(ethylene oxide)-block-poly(glycidyl methacrylate) copolymer (PEO-b-PGMA) in solution. When water was added into the PEO-b-PGMA solution in THF, unilamellar vesicles were produced. If hydrophobic primary amine additives, such as hexamethylenediamine (HDA) and dodecylamine (DA), were introduced during block copolymer assembling, the vesicular morphology remained unchanged; instead, the amines reacted with the epoxys and the vesicles were fixed by cross-linking. Furthermore, when 3-aminopropyl trimethoxysilane (APS) was applied, the organic/inorganic hybrid vesicles were obtained, which were stable against the solvent change. Therefore, this research not only supplies a new way to fix the vesicular morphology but also a reactive vesicle scaffold for introducing functional species.     

Highly fluorescent polycaprolactones decorated with di(thiophene‐2‐yl)‐diketopyrrolopyrrole: A covalent strategy of tuning fluorescence properties in solid states

Well‐defined 1,4‐diketo‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole (DTDPP) labeled polycaprolactones (PCL) with different chain lengths were synthesized and characterized. The effect of polymer chain lengths on the optical properties of DTDPP in solid states was studied by UV‐Vis absorption spectroscopy as well as steady‐state and dynamic fluorescence spectroscopies. Our results indicate that when the PCL side chain is extended to a certain length, the intermolecular aggregation of DTDPP units can be reduced significantly due to segregation effect of PCL. This approach offers a new facile strategy to address the common problem of aggregation‐caused quenching existing in organic fluorophores. These highly fluorescent biodegradable PCL polymers may find broad biomedical applications such as fluorescence‐based bioimaging and tissue engineering. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1032–1042     

Reversibly self-assembled pH-responsive PEG-p(CL-g-TMC) polymersomes

Polymersomes have gained much interest within the biomedical field as drug delivery systems due to their ability to transport and protect cargo from the harsh environment inside the body. For an improved drug efficacy, control over cargo release is however also an important factor to take into account. An often employed method is to incorporate pH sensitive groups in the vesicle membrane, which induce disassembly and content release when the particles have reached a target site in the body with the appropriate pH, such as the acidic microenvironment of tumor tissue or the endosome. In this paper, biodegradable poly(ethylene glycol)-poly(caprolactone-gradient-trimethylene carbonate)-based polymeric vesicles have been developed with disassembly features at mild acidic conditions. Modifying the polymer backbone with imidazole moieties results in vesicle disassembly upon protonation due to the lowered pH. Furthermore, upon increasing the pH efficient re-assembly into vesicles is observed due to the switchable amphiphilic nature of the polymer. When this re-assembly process is conducted in presence of cargo, enhanced encapsulation is achieved. Furthermore, the potency of the polymeric system for future biomedical applications such as adjuvant delivery is demonstrated.     

Analytical tools to monitor exocytosis: a focus on new fluorescent probes and methods

A great deal of research has been focused on unraveling the processes governing the exocytotic pathway and the extent of release during the process. Arguments abound for and against both the occurrence and significance of full release during exocytosis and partial release including kiss-and-run events. Several optical methods to directly observe the exocytosis process have been developed and here we focus on fluorescence methods and probes for this work. Although fluorescence imaging has been used for cell experiments for decades, in the last two decades a plethora of new approaches have arrived on the scene. These include application of new microscopy techniques, like total internal reflectance and stimulated emission depletion that are offering new ways to circumvent the limits of far field microscopy with a diffraction limit of 200 nm, and allow tracking of single synaptic vesicles. For selective imaging of synaptic vesicles the introduction of methods to stain the vesicular compartment has involved developing probes of the vesicular membrane and intravesicular solution, nanoparticle quantum dots that can be observed during exocytosis but not via the fusion pore, and fluorescent false neurotransmitters.     

Polymersomes with ionic liquid interiors dispersed in water

We describe polymersomes with ionic liquid interiors dispersed in water. The vesicles are prepared via a simple and spontaneous migration of poly(butadiene-b-ethylene oxide) (PB-PEO) block copolymer vesicles from a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]), to water at room temperature. As PB is insoluble in both water and [EMIM][TFSI] and PEO is well solvated in both media, the vesicles feature a PB membrane with PEO brushes forming both interior and exterior coronas. The robust and stable PB-PEO vesicles migrate across the liquid-liquid interface with their ionic liquid interiors intact and form a stabilized aqueous dispersion of vesicles enclosing microscopic ionic liquid pools. The nanostructure of the vesicles with ionic liquid interiors dispersed in water is characterized by direct visualization using cryogenic transmission electron microscopy. Upon heating, the vesicles can be quantitatively transferred back to [EMIM][TFSI], thus enabling facile recovery. The reversible transport capability of the shuttle system is demonstrated by the use of distinct hydrophobic dyes, which are selectively and simultaneously loaded in the vesicle membrane and interior. Furthermore, the fluorescence of the loaded dyes in the vesicles enables probing of the microenvironment of the vesicular ionic liquid interior through solvatochromism and direct imaging of the vesicles using laser scanning confocal microscopy. This vesicle system is of particular interest as a nanocarrier or nanoreactor for reactions, catalysis, and separations using ionic liquids.