共查询到20条相似文献,搜索用时 31 毫秒
1.
A digital moiré technique with circular and radial gratings is proposed to measure in-plane displacement and strain distributions of soft materials in a polar coordinate system. By introducing the coordinate-transform technique, the concentric circles and radial lines in the Cartesian coordinate system are converted to cross gratings in a polar coordinate system. Then, the digital moiré fringes are generated using logical and filter operations on the one-bit binary images. Finally, the in-plane displacement distributions are obtained by means of the four step phase-shifting procedure. Also, the measurement principles and the basic procedures of the new digital moiré technique are explained in detail. An application for rubber sheet with a single-edge crack is studied, and the experimental results show that the presented method is feasible. 相似文献
2.
The reflection grating method is a special case of the well-known reflection moiré principle. Whereas this moiré effect is suitable for measurement of the slope and curvature of deformed object surfaces by superposition of at least two grating images, the same results can be determined using only one reflected grating image without moiré lines.Some fundamental relationships between grating lines, optical setup and the desired deformation are developed and compared with the simplifications that are known from the moiré principle. The theory is tested using a circular plate, uniformly loaded and clamped at the circumference. 相似文献
3.
A high spatial resolution and high-sensitivity geometric micron-moiré method is presented. The method is based upon classical geometric moiré method and microscopic principle, the frequency of the specimen and reference gratings used in this method can be higher than 1000 lines/mm. By a microscopic moiré system, the high-frequency gratings could be magnified to a low-frequency level, so geometric moiré patterns can be formed. Experiments show that both the spatial resolution and the sensitivity can reach or exceed micron-level. 相似文献
4.
A. Asundi 《Optics and Lasers in Engineering》1993,18(3)
Computer aided moiré methods (CAMM) use the versatility of the computer to manipulate gratings rapidly, the basis of all moiré methods. Application of CAMM to moiré teaching, in-plane moiré, shadow and projection moiré and reflection moiré are reviewed in this paper. 相似文献
5.
In this paper, the single and two deposited metal layers method were proposed to produce the model grating for electron moiré method. The measurement principle of electron moiré method and the techniques for manufacturing model grid are expounded in detail. The accuracy of measuring strain using this method is discussed. The gratings with single deposited layer and two deposited layers with high frequency up to 5000 lines/mm were produced on different substrates. From the experimental results, both single deposited metal layer and two deposited metal layers gratings showed their heat resistance ability. Using the gratings produced and a replicated model grid, the electron moiré method was applied to measure the deformation of the strain around holes in a polyimide resin substrate, thermal strain of electronic packaging component and tensile creep around grain boundary in a pure copper specimen. 相似文献
6.
In this study, phase shifting method is used to modify moiré system into micro moiré interferometer which can measure displacement field with highly improved sensitivity. Apart from existing micro moiré technique, a low cost and less precise translation stage with rough resolution (10 μm resolution) is adapted for the phase shifter. Least square algorithm is applied to estimate the arbitrary phase shifted amount and to minimize the errors induced by lowering the cost. Moreover, specimen grating is phase shifted instead of reference grating which enables simple construction from given moiré system. To compensate for rigid body in-plane translation of specimen that may occur during phase shifting, pattern matching algorithm is put into practice to ensure pixel correspondence for each phase shifted images. To verify the newly constructed micro moiré technique, local displacement fields of Fine pitch Ball Grid Array package and Wafer Level Chip Size Package with elevated sensitivity up to 26 nm per fringe was acquired. 相似文献
7.
Huimin Xie Haixia Shang Qi-Kun Xue Jinfeng Jia Fulong Dai 《Optics and Lasers in Engineering》2005,43(10):1071
In this paper, it is demonstrated the defects play a very important role in determining the quality of artificial nanoclusters grown. The surface strain (stress) distribution around defects in Al artificial nanocluster is analyzed by Moiré fringes pattern. The moiré fringes generated by scanning lines in monitor and nanocluster array can be used as a “magnifier” to study surface imperfections with scanning tunneling microscopy (STM). As moiré fringes’ exist in many ordered nanostructures and adsorbate systems, the method is expected to have wide applications. 相似文献
8.
Rong-Seng Chang Jin-Yi Sheu Ching-Huang Lin He-Chiang Liu 《Optics & Laser Technology》2003,35(1):43-47
A new approach based on the moiré theory and wavelet transform (WT) is proposed for measuring the micro-range distance between a charge-couple-device (CCD) camera and a two-dimensional reference grating. The micro-range distance is determined by measuring the pitch of the moiré pattern image, which is digitized by a CCD camera. A one-dimensional WT algorithm is applied to estimate the pitch of the moiré pattern. Experimental results prove that this technique is very efficient and highly accurate. The moiré range finder is an economic technique for measuring a micro-range distance. 相似文献
9.
Huimin Xie Haixia Shang Fulong Dai Biao Li Yongming Xing 《Optics & Laser Technology》2004,36(4):1223-297
A new phase shifting scanning electron microscope (SEM) moiré method is proposed in this paper. The phase shifting technique is realized in four steps from 0 to 2π by shifting electron beam in the y-axis direction controlled by the SEM system. It is successfully applied to determine the residual strain of a deformed holographic grating with a frequency of 1200 lines/mm in an electronic package. As a further application, it is used to measure the virtual strain of a MEMS structure with a 5000-line/mm grating and to determine the phase distribution of a SEM moiré formed with a 6000-line/mm grating fabricated by electron beam lithography. The experiments show the feasibility of this method. It provides a new way for disposal of fringes pattern in sub-micro moiré method. 相似文献
10.
Tires and their component parts are made from various low modulus rubbers and cord/rubber laminates. In service they typically undergo large deformations of about 1–30%. The accurate measurement of these deformations by either pointwise (strain gage) or full-field (optical) techniques is rendered difficult in these circumstances. Ordinary strain gages reinforce these soft structures and inhibit their deformation, whereas most optical methods are too sensitive to measure large motions. These difficulties can be overcome by the judicious use of various moiré methods: moiré interferometry, geometric moiré and shadow moiré.Several applications of moiré methods to tire mechanics problems are presented. The emphasis is on the range of problems that has been successfully approached and on the results obtained. Examples are drawn from work on belt-edge strains, tread groove strains, sidewall strains, dynamic sidewall deformations and material properties determination. Proprietary details of technique are not included. 相似文献
11.
Two digital systems are developed for the automatic measurement of 3-D shapes using moiré techniques—an automatic 3-D shape measuring system using the scanning moiré method and an interactive fringe analysing system for moiré fringe photographs. In the automatic 3-D shape measuring system, a deformed grating is scanned and sampled with an electronic image scanning device so that moiré fringes are generated in a computer. This technique of electronic fringe generation eliminates ambiguity with regard to the sign of the moiré fringes. The interactive fringe analyser provides a flexible and versatile tool for moiré fringe analysis. Medical applications of these analysing systems are discussed. 相似文献
12.
Haixia Shang Huimin Xie Zhanwei Liu Haiming Guo Hongjun Gao Fulong Dai 《Optics and Lasers in Engineering》2004,41(5):498
In this paper, a new nano-moiré method using scanning tunneling microscope (STM) is proposed. This method is capable of measuring nanoscopic deformation of matter. The formation mechanism of the STM moiré fringe and the phase shifting technique used in STM moiré fringes are explained in details. Typical experiments are conducted with the crystal lattices of freshly cleaved highly oriented pyrolytic graphite, are used as specimen grating, to generate STM moiré fringe patterns. Phase shifting is realized in four steps from 0 to 2π by controlling the PZT in the STM system to shift the specimen in the vertical direction. This method provides a new way for disposal of moiré fringes pattern in the nano-moiré measurement. 相似文献
13.
The automatic evaluation of the grating deformation in a moiré image is greatly enhanced by the phase shift method. Based on three or more local grey values of a related number of phase shifted moiré patterns, the local displacement of a deformed grating against a reference grating, and hence the total displacement in one direction, is calculated. In this paper an extension to cross gratings is presented yielding a two- dimensional displacement field. 相似文献
14.
Implementation of holographic moiré inspection is demonstrated using one hologram to project the reference grating and a further hologram to produce moiré patterns. Well contrasted moiré fringes are obtained. Results of calibration tests are reported and an example of object contouring is presented. 相似文献
15.
Marella de Angelis Sergio De Nicola Pietro Ferraro Andrea Finizio Giovanni Pierattini 《Optics and Lasers in Engineering》1998,30(3-4)
We describe a technique based on fast Fourier transform and least-squares fit for automated analysis of moiré fringe patterns for accurately measuring the focal length of lenses. An interference fringe pattern is produced by a reflective diffraction grating interferometer and illuminates the test lens. Moiré fringes are generated by digitally superimposing the magnified fringe pattern imaged by the lens on the interference fringe pattern without the test lens. We analyze two common ways to generate the digital moiré effect: multiplication and subtraction with successive rectification of the two digitally stored intensity distributions, and we show that in the latter case by means of the described technique it is possible to determine the moiré spatial frequency by a simple and fully automated procedure. 相似文献
16.
Shunsuke Yokozeki 《Optics and Lasers in Engineering》1982,3(1):15-27
This review paper clarifies the characteristics of the incoherent-and-multiplicative type moiré fringe phenomenon, presents examples of the application of these characteristics to measurement and explains the profile prediction method and the sharpening conditions of moiré fringes formed by two binary gratings. 相似文献
17.
Minvydas Ragulskis Rimas Maskeliunas Liutauras Ragulskis Vytautas Turla 《Optics and Lasers in Engineering》2005,43(9):3640
Geometric moiré fringe formation method is a classical well-established experimental technique with numerous practical applications. This paper proposes the application of time-average geometric moiré analysis for the determination of dynamic displacements of the lithographic press rubber roller. This optical measurement technique is a natural extension of double-exposure geometric moiré for the identification of dynamic displacements of vibrating elastic structures. Experimental investigations prove the validity and effective practical applicability of the method. 相似文献
18.
The instrumentation and application of moiré topography in the diagnosis of corporal asymmetries associated to different illnesses of the osseous-muscular system in early ages is presented in this paper. A sample comprising 203 adolescents ranging between 12 and 15 years were studied. Some moiré topography analysis of human legs and the sole of the foot are also given as examples of moiré applications. The results show the advantages of using this technique in the health care and treatment of different illnesses in adolescents. Some of these advantages are provided by the easy diagnosis and the low cost of the moiré technique. 相似文献
19.
Mitsuo Takeda 《Optics and Lasers in Engineering》1982,3(1):45-52
The rays that form moiré fringes in projection type moiré topography are discussed. It is shown that the nodal-ray formula conventionally used in projection type moiré topography gives erroneous results for an object located close to the lenses. An alternative formula based on principal rays is proposed and compared with the conventional nodal ray formula. The principal ray formula proposed can be applied to a wide class of optical systems, including a telecentric system. 相似文献
20.
Minvydas Ragulskis Loreta Saunoriene Jurate Ragulskiene 《Optics and Lasers in Engineering》2006,44(11):1209-1218
Inverse problem of reconstruction of dynamic displacements from the fringe pattern generated by time average reflection moiré is investigated in this paper. A technique for numerical simulation of time average smoothed reflection moiré fringes is proposed. The smoothing procedure is incorporated into the finite element formulation of the problem. Reconstruction of the field of deflections is illustrated for a centrally clamped disk. Such techniques can be effectively exploited in hybrid numerical–experimental procedures for different objects and grating geometries. 相似文献