A DSC study of the effect of ascorbic acid on bound water content and distribution in chitosan-enriched bread rolls during storage

Changes of tightly and loosely bound water relative content in bread were studied using differential scanning calorimetry method. Combination of chitosan with ascorbic acid changes water redistribution between starch and gluten and in such a way can be related to bread quality and sensory properties. The decrease of the water vaporization temperatures, melting temperatures and enthalpies in fresh bread containing chitosan were detected when ascorbic acid was added in combination with chitosan. The decrease of melting peak temperature has been attributed to the increase of interaction of loosely bound water and the decrease of vaporization peak temperature has been attributed to the decrease of interaction of tightly bound water with bread components as a result of ascorbic acid addition. Freezable water amount and total water amount in crumb decrease more rapidly during first stage of staling and more slowly at the second stage of staling in the bread nutritionally fortified with chitosan.     

Structure and properties of bread dough and crumb

The effects of hydrocolloids (guar and locust bean gums), soluble pentosans, and whey proteins on staling of bread crumb were investigated by means of DSC, rheometry, and image analyis. One current hypothesis, that these ingredients would behave as “water binders” and, at least the former two, as anti-staling agents, was indeed confirmed, although this action might be indirect. All the samples considered showed an exothermic DSC peak preceding the endotherm of the amylopectin fusion. According to a previous work, this signal was attributed to a water-dependent cross-linking process that would involve next-neighbouring polymer chains. To check the effect produced by molecular modifications that were expected to increase the water uptake of these ingredients, doughs containing added succinylated pentosans and whey proteins, and a polycarboxylate polymer, PEMULEN TR-1, were examined. These modifications enhanced starch retrogradation and yielded a firmer crumb. It was tentatively concluded that some direct interaction between these modified molecules and the crumb polymers might have taken place. In line with the food polymer science approach, the use of Time-Temperature-Transformation (TTT) diagrams is also discussed.     

Characterization of gluten-free bread crumb baked at atmospheric and reduced pressures using TD-NMR

This research aimed to study the effects of using a partial vacuum for bread baking on macromolecules and water distribution in gluten-free bread. Bread baking under partial vacuum results in greater oven rise and a larger gas fraction in the crumb. Because water's boiling point decreases under reduced pressure, it was expected that its distribution within the dough and its interactions with the others dough's constituents (mainly starch) would differ from those in bread baked under atmospheric pressure. Time-domain nuclear magnetic resonance was used, as it has the rare capacity to quantify both gelatinization and retrogradation of starch. Complementary rheological measurements made it possible to show that crumb Young's modulus was mostly influenced by the gas fraction whereas there was little change in starch gelatinization and retrogradation when dough was baked under partial vacuum. When insufficiently hydrated (48%), the volume of breads was practically the same whatever the baking process. Meanwhile, the nuclear magnetic resonance results suggested that amylose short-term crystallization (on cooling) is dependent on water content. In addition, crumb Young's modulus during storage at room temperature correlated with an increase in free induction decay signal intensity.     

Guidelines for buckwheat enriched bread

Thermal analysis was used to check the role of the main components of buckwheat flour (polysaccharides and proteins) to assess guidelines for novel recipes for bread from wheat and buckwheat flour blends with improved nutritional properties. The structure-related poor protein quality, namely, the lack of network-forming links, severely limits the use of buckwheat flours in bread-making. Data from TG and DSC analysis indicate that the introduction of a de-hulling step in the buckwheat milling diagram and the addition of some buckwheat polysaccharide fractions, isolated from the buckwheat husk, that contribute to the formation of the crumb structure thanks to their effect on the phase separation driven by the thermodynamic incompatibility with wheat gluten proteins, allows one to tune opposite effects and obtain bread from de-hulled buckweat/wheat flour blends with alveolar distribution much close that of the wheat bread.     

Adventages and limits on usage of thermal methods in complex systems

In order to increase the nutrition value of bread, one of the most commonly used foodstuff all over the world, different additives are used in bread processing. In this paper we describe the thermal changes in bread and that of with 0.5% crude soybean lecithin additive. Their thermal stability has been investigated by TG, DSC and EGD methods. The thermal changes were also followed of soy products, lecithin and lysine, ingredients used as bread additives in order to check if they may suffer any thermal degradation during the baking process. The data obtained can be of use only for qualitative conclusions. According to the obtained data at the usual bread baking temperature only the additives in crust may partly decompose while in the crumb, at lower temperatures the additives, due to baking, are not damaged. The thermal methods give a possibility for rapid estimation of processes induced by heat effects in additives during the baking, and they are suitable to detect the changes during the bread-making procedure. However, they are neither suitable to provide any quantitative data on these changes nor facts affecting the nutrition value and of the bread.     

Biogenic amines in bread as indicators of spoilage

Elevated levels of biogenic amines (trimethylamine, putrescine and cadaverine), measured by ion mobility spectrometry (IMS) were found in a sample of “dark rye” bread that had a pungent odor but not in other bread samples. The odorless breads included three types of rye bread, whole wheat, pita bread and a baguette. Sample preparation was simple and consisted of extraction of the biogenic amines into water followed by filtering the solution. The biogenic amines were measured from a single drop (50 μL) of the extract solution. The progress of spoilage was also monitored in the odorous and odorless “dark rye”. Volatile trimethylamine, readily monitored by IMS, was the main compound responsible for the offensive odor in the spoilt bread. The samples were classified by an automatic algorithm as “fresh”, “intermediate” or “spoilt” on the basis of the total biogenic amine level. Thus, we report the development of a fast and objective method to distinguish between spoilt bread and bread that is suitable for consumption.     

Nutritional, antioxidant, and glycaemic characteristics of new functional bread

New wheat-rye bread fortified with cereal dietary fibre, β-glucan hydrogel, and sourdough starter culture was designed in this study. The impact of these additives on nutritional composition and antioxidant properties was investigated. Functional bread with extruded wheat bran (10.0 %), cereal β-glucan hydrogel (12.5 %), and lactobacilli starter culture was compared with traditional wheat-rye bread (control). The contents of basic nutrients (protein, fat, etc.), dietary fibre, biologically active compounds (polyphenols and flavonoids), qualitative and quantitative analysis of simple saccharides and phenolic acids (by HPLC) were analysed in both bread types. Antioxidant activity, measured by two spectrophotometric methods (2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonic acid); ABTS and di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium (2,2-diphenyl-1-picrylhydrasyl); DPPH, was also evaluated. The effect of the addition of the above ingredients, as compared with traditionally prepared bread, was examined in the postprandial study, in which glucose and insulin levels were determined. In comparison with the control bread, higher amounts of dietary fibre, flavonoid content, and antioxidant activity were attained in the designed bread. Consumption of the designed bread led to reduced glucose levels in healthy males (n = 10) 120 min after the ingestion of the functional bread compared with the control (p < 0.048). No statistically significant change in the insulin response in the volunteers was observed after consumption of the designed bread compared with the control.     

Estimation of the bio-accessible fraction of Cr,As, Cd and Pb in locally available bread using on-line continuous leaching method coupled to inductively coupled plasma mass spectrometry

A previously developed, efficient and simple on-line leaching method was used to assess the maximum bio-accessible fraction (assuming no synergistic effect from other food and beverage) of potentially toxic elements (Cr, As, Cd and Pb) in whole wheat brown and white bread samples. Artificial saliva, gastric juice and intestinal juice were successively pumped into a mini-column, packed with bread (maintained at 37 °C) connected on-line to the nebulizer of an inductively coupled plasma mass spectrometry (ICP-MS) instrument equipped with a collision-reaction interface (CRI) using hydrogen as reaction gas to minimize carbon- and chlorine-based polyatomic interferences. In contrast to the conventional batch method to which it was compared, this approach provides real-time monitoring of potentially toxic elements that are continuously released during leaching. Mass balance for both methods was verified at the 95% confidence level. Results obtained from the whole wheat brown and white bread showed that the majority of Cr, Cd and Pb was leached by gastric juice but, in contrast, the majority of As was leached by saliva. While there was higher total content for elements in whole wheat bread than in white bread, a higher percentage of elements were bio-accessible in white bread than in whole wheat bread. Both the on-line and batch methods indicate that 40–98% of toxic elements in bread samples are bio-accessible. While comparison of total analyte concentrations with provisional tolerable daily intake values may indicate some serious health concern for children, when accounting for the bio-accessibility of these elements, bread consumption is found to be safe for all ages.     

Determination of propionate in bread using capillary zone electrophoresis.

A method for the determination of propionate in bread is described. The propionate was extracted from the bread with a repeated extraction procedure and measured using capillary zone electrophoresis in the indirect UV mode applying a background electrolyte of 0.005 M Tris adjusted at pH 4.6 by adding benzoic acid. Using laboratory-baked bread containing known amounts of sodium propionate, recoveries of ca. 95% could be established, validating the method.     

Determination of ochratoxin A in maize bread samples by LC with fluorescence detection

Ochratoxin A (OTA) is a secondary fungal metabolite produced by several moulds, mainly by Aspergillus ochraceus, A. carbonarius, A. niger and by Penicillium verrucosum. The present work shows the results of comparative studies using different procedures for the analysis of OTA in maize bread samples. The studied analytical methods involved extraction with different volumes of PBS/methanol, different extraction apparatus, and clean-up through immunoaffinity columns. The separation and identification were carried out by high-performance liquid chromatography with fluorescence detection. The optimized method for analysis of OTA in maize bread involved extraction with PBS:methanol (50:50), and clean-up with IAC column. The limit of quantification was 0.033 ng g⁻¹. Recoveries ranged from 87% to 102% for fortifications at 2.000 and 0.500 ng g⁻¹, respectively, within-day R.S.D. of 1.4% and 4.7%. The proposed method was applied to 15 samples and the presence of OTA was found in nine samples at concentrations ranging from nd to 2.650 ng g⁻¹.     

Determination of deoxynivalenol, T-2 and HT-2 toxins in a bread model food by liquid chromatography-high resolution-Orbitrap-mass spectrometry equipped with a high-energy collision dissociation cell

A sensitive and accurate method employing a single stage high resolution mass spectrometer equipped with a high-energy collision-dissociation cell (HCD) for the simultaneous determination of deoxynivalenol (DON), T-2 toxin (T-2) and HT-2 toxin (HT-2) in a processed bread model food has been developed. Two sample pre-treatment routes for the extraction of these mycotoxins were investigated, based on Mycosep^® column clean up or QuEChERS-like procedure, respectively. The former approach suffered less from matrix effects and allowed to achieve in bread samples LODs of 7, 12 and 17 ng/g for T-2, HT-2 and DON, respectively, with 0.5 ppm mass accuracy. Two acquisition modes, full scan MS and all ion fragmentation, exploiting the fragmentation features offered by an HCD chamber and integrated within the Orbitrap analyser, were compared for quantitative purposes. The method was applied to investigate the degradation of these mycotoxins during bread processing using a bread model food. Most T-2 hydrolyzed to HT-2 during dough preparation, and about 20–30% of HT-2 and DON was degraded during bread baking.     

Multiple headspace solid-phase microextraction after matrix modification for avoiding matrix effect in the determination of ethyl carbamate in bread

This study presents the potential of multiple headspace solid-phase microextraction (multiple HS-SPME) for the quantification of analytes in solid samples. Multiple HS-SPME shares the same advantages as SPME. It also enables a complete recovery of the target compound and therefore the matrix effect, which commonly appears in SPME-based analysis, is avoided. A method based on multiple HS-SPME for the determination of the toxic contaminant ethyl carbamate (EC) in bread samples has been developed and validated, using gas chromatography with flame ionization detector. A novel polyethylene glycol/hydroxy-terminated silicone oil fiber was prepared for the first time and subsequently used instead of commercial ones because of its high extraction ability and good operational stability. An important problem still remained in multiple HS-SPME of EC in fresh bread samples. The adsorption of EC by water in the samples caused low transport of analyte to the headspace, which made multiple HS-SPME invalidated. Mixing with anhydrous sodium sulphate, the sensitivity of the method was improved and the problem was solved. The proposed method showed satisfactory linearity (0.15–1500 μg g⁻¹), precision (1.6%, n = 5) and limit of detection (0.041 μg g⁻¹). Good recoveries, from 92.5 to 103.4%, were observed at three spiking levels. The method was applied to 14 bread samples. The multiple HS-SPME technique offers several advantages including reducing the manipulation time and cost, and avoiding analyte losses, especially in the analysis of a large number of samples in different matrices.     

Use of multivariate analysis of MIR spectra to study bread staling

Different kinds of bread, stored at constant temperature and at controlled humidity conditions for a week since their manufacturing date, were analysed by Attenuated Total Reflectance-Fourier Transform InfraRed (ATR-FTIR) spectroscopy. The collected spectra were processed by Principal Component Analysis (PCA), in order to evaluate the changes occurring during bread ageing. For the sake of comparison, the 1060-950 cm spectral window has been also investigated by curve-fitting methods. It was observed that the first PC increases monotonically with ageing of samples. Furthermore, the more influential variables on PC1 correspond to spectral regions where are located stretching and bending bands, which are mainly attributed to typical starch bonds vibrations.     

Effect of the Addition of Dried Dandelion Roots (Taraxacum officinale F. H. Wigg.) on Wheat Dough and Bread Properties

Dried and crushed dandelion roots (Taraxacum officinale F. H. Wigg.) (TO) were used as a formulation additive (at the amount of 0, 1, 3, 4, 5, and 6 g 100 g⁻¹ flour) to wheat bread. The farinographic properties of the dough and the physical and chemical properties of the bread were evaluated. It was found that the addition of dried flour caused a significant decrease in water absorption by the flour (1% and higher TO level), an increase in the development time (from 2% to 5% TO addition) and dough stability (3% and 4% TO level), and an increase in dough softening (4% and higher TO level). As the substitution of TO for wheat flour increased, there was a gradual decrease in loaf volume, an increase in specific weight and crumb hardness, and a darkening of the crumb color. The total polyphenol content increased linearly with the percentage increase of dried root additions TO from 0.290 to 0.394 mg GAE g⁻¹ d.m_., which translated into an increase in the antioxidant activity of the bread. It was found that dried crushed roots of Taraxacum officinale can be a recipe additive for wheat bread; however, due to their specific smell and bitter aftertaste, the level of this additive should not exceed 3 g 100 g⁻¹ flour.     

The use of electrodialysis to prepare aqueous bread extracts for bromate determination by chemiluminescence

A cleanup procedure based on electrodialysis is described for the preparation of aqueous bread extracts for bromate determination by chemiluminescence. The technique utilizes electrophoresis with 3 chambers separated by semipermeable membranes. The relative merits of reverse osmosis (RO), ultrafiltration, and nanofiltration membranes with various molecular weight cutoffs were evaluated. The best results were obtained with an RO membrane manufactured from thin-film (composite) polysulfone as support for polyamide. A 0.14 M sodium sulfate solution in the center or collection chamber provides optimum conductivity. Aqueous hydroxylamine sulfate (30 mM) was selected for the anode compartment as a reductant for the anode oxidation products. The constant current mode at 150 mA with a potential of ca 100 volts was used. After electrophoretic separation, the bromate concentration in the collection chamber was typically 2 to 3 times greater than the concentration in the bread extract. The chemiluminescent reaction of bromate with sulfite with hydrocortisone as the enhancer was selected for detection of bromate. The emission, with a wavelength maximum at 575 nm, was found to "glow" rather than "flash" after the reagents were mixed; therefore, it was possible to optimize the light collection period. The method was validated with a variety of commercial bread products. White bread, hot dog buns, hamburger rolls, and a multigrain bread from 7 different manufacturers were studied.     

同位素稀释-气相色谱-质谱法测定面包中3-氯-1,2-丙二醇脂肪酸酯

采用同位素稀释的气相色谱-质谱(GC-MS)联用技术,建立了面包中3-氯-1,2-丙二醇脂肪酸酯(3-MCPD酯)的检测方法.样品经正己烷超声提取后用甲醇钠/甲醇水解,硅藻土小柱净化,提取液经七氟丁酰咪唑(HFBI)衍生后注入GC-MS测定.目标化合物经弱极性的气相毛细管色谱柱分离,采用选择离子监测模式(SIM)监测,以同位素内标进行定量.3-MCPD酯在0.025~1.600 mg/L范围内均呈良好的线性关系,相关系数(r)为0.9999,其在面包中的检出限(LOD)低至10μg/kg.以空白面包样品进行加标水平为40、100、160和240μg/kg的加标回收实验,回收率在78.9%~117.0%之间,相对标准偏差(RSD)为2.1%~4.9%,说明该方法的精密度和准确度均良好.本方法灵敏度高、定性准确,适合于面包中3-MCPD酯的检测.     

Occurrence of ochratoxin A in bread consumed in Morocco

One hundred samples of commercial bread purchased from January to October (2006) from retail bakeshops in five different cities (Rabat, Témara, Salé, Casablanca and Meknès) in Morocco were surveyed for the presence of ochratoxin A (OTA) using liquid chromatography coupled to fluorescence detection. The identification of OTA in positive bread samples was confirmed by methyl ester derivatization. Analytical results showed that forty eight (48%) samples were positive with OTA greater than the limit of quantification (LOQ = 0.051 ng/g). Levels of OTA in positive samples ranged between 0.14 and 149 ng/g. The average contamination of bread samples with OTA was 13 ± 1.5 ng/g. The highest frequency of positive samples (61.5%) and the most contaminated sample (149 ng/g) were found in bread commercialized in the Casablanca area. Twenty six of the positive samples exceeded the maximum level of 3 ng/g set by European regulations for OTA in cereals and derivatives. Based in the results presented in this study, the estimated daily intake of OTA from bread was 126 ng/kg bw/day. The present paper is the first ever drafted on the natural occurrence of OTA in bread consumed in Morocco. Data on the daily intake of OTA by the Moroccan population are also estimated for the first time.     

Measurement of bromate in bread by liquid chromatography with post-column flow reactor detection

This method is suitable for the determination of bromate residues in a variety of baked goods. The peer-verified method trial was performed on white bread, multigrain bread, and coffee cake spiked with known levels of potassium bromate. The analytical portion is extracted with deionized water to remove bromate from the bulk of the baked product. The aqueous extract is carried through a series of steps to remove co-extractives that would interfere with the liquid chromatography (LC) in the determinative step or hasten the deterioration of the LC column. The extract is filtered before passing it through a reversed-phase solid-phase extraction (SPE) column and a cation-exchange column in the silver form to remove lipids and chloride, respectively. Ultrafiltration is then used to remove proteins with molecular weights of >30,000 daltons. Finally, a cation-exchange column in the sodium form is used to remove silver ions from the extract. The determinative step uses LC with a reversed-phase column and an ion-pairing agent in the mobile phase. Detection is based on the post-column reaction of bromate with o-dianisidine to form an oxidation product that is quantitated spectrophotometrically at 450 nm. Overall agreement between the submitting and peer laboratories was quite good. For bromate levels of 10-52 ppb, overall mean recoveries were 76.9 and 78.8% for the submitting and peer laboratories, respectively. The standard deviations were higher for the results of the peer laboratory, probably because of the generally higher level of baseline noise present in the chromatograms. The results demonstrate that the method provides adequate accuracy with low-fat as well as high-fat foods. Bromate at levels as low as 5 ppb (ng/g) can be detected with the method.     

Pressurised liquid extraction and quantification of fat-oil in bread and derivatives products

A pressurised liquid extraction (PLE) method for extraction and quantification of total fat and oil in bread and derivatives products has been proposed. Parameters implied in the extraction process; such us temperature, static time, number of extraction cycles, purge time and flush volume; have been optimised using a formal methodology based on statistical experimental design in order to obtain the best results. Moreover, this method has been validated using homemade bread elaborated in the laboratory which contained 9.64 g of olive oil in 100 g dry weight. The production and use of an “ad hoc” in-house reference material is just one of the most relevant aspects of this study. The uncertainty estimation has been carried out taking into account all the uncertainty components of the process and it was stated as 4.2%. Finally, the proposed method has been applied to six different Spanish bread derivatives products with different olive oil contents (5-20%) to determine the fat content.     

Occurrence of ochratoxin A in bread consumed in Morocco

One hundred samples of commercial bread purchased from January to October (2006) from retail bakeshops in five different cities (Rabat, Témara, Salé, Casablanca and Meknès) in Morocco were surveyed for the presence of ochratoxin A (OTA) using liquid chromatography coupled to fluorescence detection. The identification of OTA in positive bread samples was confirmed by methyl ester derivatization. Analytical results showed that forty eight (48%) samples were positive with OTA greater than the limit of quantification (LOQ = 0.051 ng/g). Levels of OTA in positive samples ranged between 0.14 and 149 ng/g. The average contamination of bread samples with OTA was 13 ± 1.5 ng/g. The highest frequency of positive samples (61.5%) and the most contaminated sample (149 ng/g) were found in bread commercialized in the Casablanca area. Twenty six of the positive samples exceeded the maximum level of 3 ng/g set by European regulations for OTA in cereals and derivatives. Based in the results presented in this study, the estimated daily intake of OTA from bread was 126 ng/kg bw/day. The present paper is the first ever drafted on the natural occurrence of OTA in bread consumed in Morocco. Data on the daily intake of OTA by the Moroccan population are also estimated for the first time.