染料敏化太阳能电池用琼脂糖基磁性聚合物电解质的电化学性能

以琼脂糖为聚合物基质,N-甲基吡咯烷酮为溶剂,磁性纳米粒子四氧化三铁为无机纳米颗粒添加剂制备了用于染料敏化太阳能电池(DSSC)的磁性聚合物电解质.通过研究不同小分子表面活性剂,聚乙二醇(PEG200)、曲拉通(TritonX-100)、乙酰丙酮和三者混合的表面活性剂对掺杂有1%(w)Fe3O4的磁性聚合物电解质离子电导率的影响,发现PEG200的加入可有效提高琼脂糖基磁性聚合物电解质的离子电导率.同时,对不同PEG200浓度添加下的电解质进行离子电导率测试研究发现:当PEG200加入量为61.8%(w)时,电解质具有最佳的离子电导率(2.88×10-3S·cm-1);对染料敏化太阳能电池进行电化学交流阻抗谱(EIS)测试的结果表明:染料敏化太阳能电池的电子寿命和复合电阻随着PEG200浓度的增加是先增大后减小,最大的电子寿命和复合电阻出现在PEG200浓度为68.3%(w)处.     

准固态染料敏化太阳能电池中电解质体系的研究进展

染料敏化太阳能电池(Dye Sensitized Solar Cells)是新一代将光能转化为电能的重要能源转换装置。它具有低廉的材料和器件制作成本、较高的光电转换效率以及电池制作过程简单等诸多优点,拥有广阔的应用空间和巨大的潜在商业价值,因而吸引了广泛的研究关注。染料敏化太阳能电池主要由染料敏化的光阳极、电解质和对电极三个部分组成。其中,电解质作为染料敏化太阳能电池的重要组成部分,其对离子的传导和扩散,以及促进染料再生的能力极大地影响着染料敏化太阳能电池的电荷传输和光电性能。本文聚焦于染料敏化太阳能电池准固态电解质体系,主要从聚合物凝胶电解质、有机小分子凝胶电解质和无机纳米粒子凝胶电解质三大方面综述讨论了该研究领域当前最新研究进展,并对其未来研究趋势进行了展望。     

聚合物/TiO2杂化纳米纤维微孔膜的制备及其在染料敏化太阳能电池中的应用

利用静电纺丝技术,制备了不同的聚合物/TiO2杂化纳米纤维微孔膜,吸附液体电解质后形成聚合物/TiO2杂化纳米纤维微孔膜准固态电解质,应用于制备准固态染料敏化太阳能电池(DSSCs).测试了电纺聚合物纳米纤维微孔膜电解质的吸液率、孔隙率、离子电导率等参数,研究了纳米纤维微孔膜准固态电解质DSSCs的光伏性能.结果显示,TiO2的掺入可提高聚合物/TiO2杂化纳米纤维微孔膜对液态电解质的浸润扩散性能,从而提高纳米纤维微孔膜对液态电解质的吸附能力.组装的DSSCs的光电转换效率可达液态电解质的90%以上,并具有较好的长期工作稳定性.     

聚乙烯醇缩醛基准固态电解质及其在染料敏化太阳能电池中的应用

采用聚乙烯醇缩甲醛(PVF)与聚乙烯醇缩丁醛(PVB)2种聚乙烯醇缩醛类聚合物制作了准固态电解质并应用在了染料敏化太阳能电池上.利用红外光谱,热力学及电化学的方法对聚合物及聚合物电解质进行了表征,结果表明聚合物中C O及O—C—O基团可以通过氧原子与锂离子相互作用促进Li I的电离.PVB中丙基侧链对其热力学及电化学性能有显著的影响.通过对电解质组成进行优化,PVF和PVB基电解质的电导率分别达到2.5 m S·cm~(-1)及4.2 m S·cm~(-1),极限扩散电流分别为10.05 m A·cm-2(扩散系数为1.84×10-6cm2·s~(-1))和17.89 m A·cm-2(扩散系数为3.23×10-6cm2·s~(-1)).PVF及PVB基准固态染料敏化太阳能电池分别达到了4.18%和6.06%的光电转化效率,并展现了良好的稳定性.     

新型梳状共聚物在准固态染料敏化太阳能电池中的应用及其对电子复合的影响

合成了乙烯基咪唑碘盐(VImI)和聚乙二醇单甲醚甲基丙烯酸酯(PEGMA)的梳状共聚物.利用VImI/PEGMA共聚物制备了准固态聚合物电解质.通过光电流密度-电压(J-V)曲线和电导率测定以及电化学阻抗分析,探讨了基于此电解质的染料敏化太阳能电池的电荷传输与界面电子转移机制.结果表明,VImI/PEGMA共聚物可以有效抑制TiO2/电解质界面电子复合并提高TiO2导带能级,敏化电池的光伏性能并不完全取决于电解质的电导率.通过考察共聚物中VImI与PEGMA单元的摩尔比与开路电压的关系,发现共聚物对电子复合的抑制作用主要源于VImI链段.此外,开路电压衰减(OCVD)和瞬态光电流测试结果说明,共聚物能够提高TiO2薄膜的电子寿命,而且对陷阱电子能级的分布具有调节作用.当共聚物在电解质中的质量分数为50%,VImI与PEGMA的摩尔比为5.0时,准固态染料敏化太阳能电池于100mW·cm-2光强下获得了4.10%的光电转换效率.     

基于铝离子掺杂二氧化钛薄膜的染料敏化太阳能电池的光电性能

采用水热法制备出Al3+掺杂二氧化钛薄膜,通过玻璃棒涂于导电玻璃上,在450°C的温度下烧结并将其用N3染料敏化制成染料敏化太阳能电池(DSSCs).通过X射线光电子能谱(XPS)、X射线衍射(XRD)、扫描电镜(SEM)及DSSCs测试系统对其进行了测试表征,研究了Al3+掺杂对TiO2晶型及染料敏化太阳能电池的光电性能影响.XPS数据显示Al3+成功掺杂到了TiO2晶格内,由于Al3+的存在,对半导体内电子和空穴的捕获及阻止电子/空穴对的复合发挥重要作用.莫特-肖特基曲线显示掺杂Al3+后二氧化钛平带电位发生正移,并导致电子从染料注入到TiO2的驱动力提高.DSSCs系统测试结果表明,Al3+掺杂的TiO2薄膜光电效率达到6.48%,相对于无掺杂的纯二氧化钛薄膜光电效率(5.58%),其光电效率提高了16.1%,短路光电流密度从16.5mA·cm-2提高到18.2mA·cm-2.     

有机染料敏化网状二氧化钛纳米纤维微孔膜太阳能电池研究

利用静电纺丝技术, 在TiO₂纳米粒子上电纺一层网状TiO₂纳米纤维微孔膜作为光散射层, 并在TiO₂纳米粒子中掺杂少量MgO以抑制电子和空穴的复合, 得到TiO₂纳米纤维/纳米粒子复合光阳极用于染料敏化太阳能电池. 将这种光阳极分别与有机三苯胺染料SD2, SD3或钌染料N719及鹅脱氧胆酸(CDCA)共敏化时, 在AM 1.5 (100 mW/cm²)的模拟太阳光照射下, 染料敏化太阳能电池的光电转换效率达到6.35%～8.85%. 同时, 使用半固态电解质可以达到液态电解质90%的光电转换效率.     

硫基离子液体电解质拓宽量子点敏化太阳能电池的应用温度范围

制备了1-甲基-3-丙基咪唑硫离子液体电解质,并应用在量子点敏化太阳能电池中。通过优化S和Na₂S的浓度,电解质的电导率在25℃下达到了12.96 mS·cm^-1。差示扫描量热法分析表明离子液体电解质的玻璃化转变温度为-85℃。采用该电解质的量子点敏化太阳能电池在25℃下达到了3.03%的光电转化效率(η),与采用水基电解质的电池的效率3.34%接近。由于本文中的离子液体电解质具有低玻璃化转变温度和不易挥发的优点,采用离子液体电解质的量子点敏化太阳能电池在-20℃ (η=2.32%)及80℃ (η=1.90%)的温度下表现出了比水基电解质优异的光电转化性能。     

聚合物电解质在染料敏化太阳能电池中的应用进展

染料敏化太阳能电池(DSSC)由于成本低、污染小、制备工艺简单而受到广泛关注。电解质在其中起到桥梁的作用,能促使染料再生、输运空穴,从而完成整个光电循环过程,是DSSC重要的组成部分。本文简要介绍了DSSC的基本结构和工作原理,指出了传统液态电解质存在的问题,综述了近年来以聚合物为基体制备的新型固态聚合物电解质、凝胶聚合物电解质以及多孔聚合物电解质在DSSC中的应用,最后对聚合物电解质在染料敏化太阳能电池中的发展做出了展望。     

聚(4-乙烯基吡啶)的合成及其在染料敏化太阳电池中的应用

采用自由基聚合法合成了聚(4-乙烯基吡啶)(P4VP),并用于制备染料敏化太阳电池的凝胶电介质.研究了P4VP含量对电解质和太阳电池性能的影响.结果表明,以P4VP为骨架通过化学交联固化液态电解质制备的有机胶体电解质体系有机相可溶剂化Li ,当其含量为7.5wt%时体系离子电导率可达5.77mS/cm与液态电解质相当.利用这种准固态电解质制备的敏化太阳电池在100mW/cm2,25℃下获得光电转换效率2.3%.     

Photovoltaic performance of dye-sensitized solar cells assembled by in-situ chemical cross-linking

Quasi-solid state dye-sensitized solar cells (DSSCs) were assembled by in-situ chemical cross-linking of a gel electrolyte precursor containing liquid electrolyte. The DSSCs assembled with this cross-linked gel polymer electrolyte showed higher open circuit voltage and lower short-circuit photocurrent density than those of DSSCs with liquid electrolyte. Addition of SiO₂ nanoparticles into the cross-linked gel polymer electrolyte significantly improved the photovoltaic performance and long-term stability of the DSSCs. The optimized quasi-solid state DSSC showed high conversion efficiency, 6.2% at 100 mW cm^?2 with good durability.     

Synthesis of organic sulfobetaine‐based polymer gel electrolyte for dye‐sensitized solar cell application

We have synthesized eco‐friendly, economic, and equally efficient polysulfobetaine‐based gel electrolyte to the alternative of liquid electrolyte in the fabrication of dye‐sensitized solar cells (DSSCs) for the first time. This nitrogen‐rich and highly conductive polysulfobetaine was synthesized by an easy and facile method without the use of any catalyst and explored for its DSSC application. The synthesized polymer gel electrolyte exhibited good ionic conductivity about 6.8 × 10^?3 Scm^?1 at ambient temperatures. DSSCs were fabricated based on this polysulfobetaine gel electrolyte and studied for their performance based on photovoltaic parameters. The DSSC photovoltaic results were appreciable and are Voc = 0.82 V, Jsc = 11.49 mA/cm², FF = 66%, and PCE = 6.26% at 1 sun intensity. These values are slightly lower than conventional liquid electrolyte‐based DSSC shown as Voc = 0.78 V, Jsc = 12.90 mA/cm², FF = 69%, and PCE = 7.07%, both at 100 mWcm^?2. Conductivity and photovoltaic parameters of the device reveals that as prepared polysulfobetaine‐based polymer gel electrolyte may be useful in the fabrication of DSSC and other electrochemical devices. Copyright © 2017 John Wiley & Sons, Ltd.     

Study of quasi-solid electrolyte in dye-sensitized solar cells using surfactant as pore-forming materials in TiO<Subscript>2</Subscript> photoelectrodes

A novel polymer gel electrolyte was used to improve the performance and long-term stability in dye-sensitized solar cells (DSSCs). The polymer gel electrolyte (PGE) was prepared by mixing 5 wt% poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and 2 % TiO₂ nanoparticles. The conductivity of PGE with P25 reached 9.98 × 10^?3 S/cm, which increased by 34.9 % compared with 7.40 × 10^?3 S/cm of PGE without P25, and the diffusion coefficient was also increased by 19.0 %. Different photoelectrodes were obtained by using three kinds of surfactants (cetylamine, octadecylamine, and P123) as pore-forming materials, and their morphologies were contrasted through scanning electron microscopy (SEM). The results showed that gel electrolyte can increase the short-circuit current density (J _sc) from 11.01 to 12.99 mA/cm² in DSSCs. Moreover, unlike the liquid electrolyte, the gel electrolyte is more conducive to the TiO₂ photoelectrodes with larger pores. In conclusion, the efficiency of DSSC with gel electrolyte and P123 as pore-forming material was 6.73 %, which was 12 % higher than the liquid electrolyte in the same test condition. In addition, the sealed gel electrolyte DSSCs showed better stability than did liquid electrolyte DSSCs during nearly 600 h.     

A novel composite polymer electrolyte containing room-temperature ionic liquids and heteropolyacids for dye-sensitized solar cells

A novel composite polymeric gel comprising room-temperature ionic liquids (1-butyl-3-methyl-imidazolium-hexafluorophosphate, BMImPF₆) and heteropolyacids (phosphotungstic acid, PWA) in poly(2-hydroxyethyl methacrylate) matrix was successfully prepared and employed as a quasi-solid state electrolyte in dye-sensitized solar cells (DSSCs). These composite polymer electrolytes offered specific benefits over the ionic liquids and heteropolyacids, which effectively enhanced the ionic conductivity of the composite polymer electrolyte. Unsealed devices employing the composite polymer electrolyte with the 3% content of PWA achieved the solar to electrical energy conversion efficiency of 1.68% under irradiation of 50 mW cm⁻² light intensity, increasing by a factor of more than three compared to a DSSC with the blank BMImPF₆-based polymer electrolyte without PWA. It is expected that these composite polymer electrolytes are an attractive alternative to previously reported hole transporting materials for the fabrication of the long-term stable quasi-solid state or solid state DSSCs.     

Synthesis of copolymer electrolytes based on polysiloxane and their high temperature durability analysis for solvent-free dye-sensitized solar cells

The present work develops a new type of solvent-free copolymer electrolyte based on polysiloxane for dye-sensitized solar cells (DSSCs). The electrolyte is characterized by conductivity measurements, hydrogen-1 nuclear magnetic resonance spectroscopy, rheology, and DSSC performance. Repeated units of the ethylene oxide on methylhydrosiloxane show plasticizing effects and enhanced durability of the DSSCs. DSSC employing the polysiloxane electrolytes show no energy conversion efficiency decay after 16 days test at room temperature and yields a conversion efficiency of 1.5% during long-term stability measurement at 90 °C under white light irradiation of 100 mW cm⁻². The new solvent-free polysiloxane copolymer electrolyte can be good candidate for next generation DSSC.     

The conducting polymer electrolyte based on polypyrrole-polyvinyl alcohol and its application in low-cost quasi-solid-state dye-sensitized solar cells

The effect of polypyrrole (PPy) on the polyvinyl alcohol (PVA)-potassium iodide (KI)-iodine (I₂) polymer electrolytes has been investigated and optimized to use in a dye-sensitized solar cell (DSSC). The different weight ratios of PVA: PPy (93: 2, 91: 4, 89: 6, 87: 8, and 85: 10 wt%) polymer electrolytes (PE) were prepared by solution casting. Structural, complex formation and surface roughness of the prepared electrolytes was confirmed by X-ray diffraction, FTIR, and atomic force microscopy (AFM) respectively. Conductivity plots of all polymer films showed increasing trend with temperature and concentration of PPy. The activation energy of the optimized system found to be 0.871 kJ mol^?1. UV-visible spectrum was adopted to characterize the absorption spectra of the material revealed that increase in the absorbance with increasing PPy content and shifting the absorbance maximum towards lower energy. The indirect band gap decreased from 3.78 to 2.14 eV and direct band gap decreased from 3.88 to 2.71 eV. The EIS analyses revealed the lower charge transfer resistance of 3.029 Ω cm² at the interface between CE and PE. The excellent performance was observed in the fabricated DSSCs using PVA (85%)/PPy (10%)/KI (5%)/I₂ polymer electrolyte with a short-circuit current density of 11.071 mA cm^?2, open-circuit voltage of 0.644 V, fill factor of 0.575, and photovoltaic conversion efficiency of 4.09% under the light intensity of 100 mW cm^?2. Hence, the PPy content in polymer electrolyte influences the remarkable performance of low-cost DSSC.     

Enhanced photovoltaic characterization and charge transport of TIO2 nanoparticles/nanotubes composite photoanode based on indigo carmine dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) have established themselves as an alternative to conventional solar cells owing to their remarkably high power conversion efficiency, longtime stability and low-cost production. DSSCs composed of a dyed oxide semiconductor photoanode, a redox electrolyte and a counter electrode. In these devices, conversion efficiency is achieved by ultra-fast injection of an electron from a photo excited dye into the conduction band of metal oxide followed by subsequent dye regeneration and holes transportation to the counter electrode. The energy conversion efficiency of DSSC is to be dependent on the morphology and structure of the dye adsorbed metal oxide photoanode. Worldwide considerable efforts of DSSCs have been invested in morphology control of photoanode film, synthesis of stable optical sensitizers and improved ionic conductivity electrolytes. In the present investigation, a new composite nano structured photoanodes were prepared using TiO₂ nano tubes (TNTs) with TiO₂ nano particles (TNPs). TNPs were synthesized by sol–gel method and TNTs were prepared through an alkali hydrothermal transformation. Working photoanodes were prepared using five pastes of TNTs concentrations of 0, 10, 50, 90, and 100 % with TNPs. The DSSCs were fabricated using Indigo carmine dye as photo sensitizer and PMII (1-propyl-3-methylimmidazolium iodide) ionic liquid as electrolyte. The counter electrode was prepared using Copper sulfide. The structure and morphology of TNPs and TNTs were characterized by X-ray diffraction and electron microscopes (TEM and SEM). The photocurrent efficiency is measured using a solar simulator (100 mW/cm²). The prepared composite TNTs/TNPs photoanode could significantly improve the efficiency of dye-sensitized solar cells owing to its synergic effects, i.e. effective dye adsorption mainly originated from TiO₂ nanoparticles and rapid electron transport in one-dimensional TiO₂ nanotubes. The results of the present investigation suggested that the DSSC based on 10 % TNTs/TNPs showed better photovoltaic performance than cell made pure TiO₂ nanoparticles. The highest energy-conversion efficiency of 2.80 % is achieved by composite TNTs (10 %)/TNPs film, which is 68 % higher than that pure TNPs film and far larger than that formed by bare TNTs film (94 %). The charge transport and charge recombination behaviors of DSSCs were investigated by electrochemical impedance spectra and the results showed that composite TNTs/TNPs film-based cell possessed the lowest transfer resistances and the longest electron lifetime. Hence, it could be concluded that the composite TNTs/TNPs photoanodes facilitate the charge transport and enhancing the efficiencies of DSSCs.     

电化学阻抗谱研究聚合物凝胶电解质对染料敏化太阳能电池性能的影响

用甲基丙烯酸β-羟乙酯(HEMA)与N-乙烯基吡咯烷酮(NVP)共聚物P(HEMA-NVP)、甲基丙烯酸甲酯(MMA)与N-乙烯基吡咯烷酮共聚物P(MMA-NVP)为原料制备了聚合物凝胶电解质, 用电化学阻抗谱(EIS)研究了聚合物凝胶电解质中聚合物基质的结构与组成对准固态染料敏化太阳能电池(DSSCs)光伏性能的影响. 不同交联剂用量、不同HEMA用量的P(HEMA-NVP)共聚物及不同MMA用量的P(MMA-NVP)吸收液态电解质后分别形成HGelI、HGelII、MGel凝胶电解质. 结果发现, 随共聚物P(HEMA-NVP)中交联剂由0.1%(w, 下同)增大到0.6%时, 形成的HGelI 组装的DSSCs的光电转化效率(η)先增大后降低, 交联剂用量为0.4%时, DSSCs的η为最大, 为5.54%(光强100 mW·cm^-2). 同时, 比较HGelII 系列和MGel 系列DSSCs的光电性能参数发现, 含有羟基的HGel 系列的η要高于MGel 系列, 而后者的开路电压(V_oc)值高于前者. 在HGelII 系列中, HEMA含量为60%(w)时, DSSCs的η最高. 电化学阻抗谱分析表明共聚物中交联结构的不同影响了电池内部的界面阻抗及离子的传输, 引入羟基有利于降低界面阻抗. 通过调整共聚物中交联剂用量和羟基含量可改善DSSCs的光伏性能.     

Quasi-solid-state dye-sensitized solar cells assembled with polymeric ionic liquid and poly(3,4-ethylenedioxythiophene) counter electrode

Poly(3,4-ethylenedioxythiophene) nanofibers (PEDOT-NF) with high catalytic activity were synthesized and employed as a counter electrode in dye-sensitized solar cells (DSSCs). A polymeric ionic liquid (PIL) was used as a gelling agent and an iodide source for making a highly conductive gel polymer electrolyte. A quasi-solid-state DSSC assembled with this PIL-based gel polymer electrolyte and PEDOT-NF counter electrode exhibited high conversion efficiency of 8.12% at 100 mW cm^− 2.     

Effect of NiO nanofiller concentration on the properties of PEO-NiO-LiClO4 composite polymer electrolyte

Composite polymer electrolyte films comprising polyethylene oxide (PEO) as the polymer host, LiClO₄ as the dopant, and NiO nanoparticle as the inorganic filler was prepared by solution casting technique. NiO inorganic filler was synthesized via sol-gel method. The effect of NiO filler on the ionic conductivity, structure, and morphology of PEO-LiClO₄-based composite polymer electrolyte was investigated by AC impedance spectroscopy, X-ray diffraction, and scanning electron microscopy, respectively. It was observed that the conductivity of the electrolyte increases with NiO concentration. The highest room temperature conductivity of the electrolyte was 7.4?×?10^?4 S cm^?1 at 10 wt.% NiO. The observation on structure shows the highest conductivity appears in amorphous phase. This result has been supported by surface morphology analysis showing that the NiO filler are well distributed in the samples. As a conclusion, the addition of NiO nanofiller improves the conductivity of PEO-LiClO₄ composite polymer electrolyte.