Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

Hydrocarbon species mu3-CCH2-, mu3-CCH3 and mu-CHCH3 supported on Ti3O3

Treatment of the mu3-ethylidyne complex [{TiCp*(mu-O)}3(mu3-CMe)](1), (Cp*=eta5-C5Me5) with alkali metal amides leads to the oxoheterometallocubane derivatives [M(mu3-O)3{(TiCp*)3(mu3-CCH2)}] [M = Li (2), Na (3), K (4), Rb (5), Cs (6)] containing the naked carbanion mu3-CCH2-; the addition of triphenylmethanol and tert-butanol to the compounds 2-6 gives rise to the oxoderivatives [{TiCp*(mu-O)}3(mu-CHMe)(OCR3)][R = Me (7), Ph (8)] which show a mu-ethylidene bridge on the surface model Ti3O3.     

3-oxo-3-phosphapentopyranoses

Addition of methyl phosphinate to 2(R)-methoxy 3-oxapentanedial gives all eight possible diastereoisomeric 3-phosphapentopyranoses in very poor yield. Structures and stereochemistry are assigned on the basis of ¹H, ³¹P, NMR, and mass spectroscopy of their acetates. © 1996 John Wiley & Sons, Inc.     

Calculation of the H2+ rovibrational energies and spectroscopic constants in the 2pπ, 3dσ, 4dσ, 4fπ, 4fσ, 5gσ, and 6iσ electronic states

Starting with the Hamilton‐Jacobi equation, Campos et al. have applied Hylleraas' method along with the series obtained by Wind‐Jaffe to several molecular ions, among which the H₂⁺ system, to determine their electronic energies in different states. In this work, we have fitted the potential energy curves for the 2pπ, 3dσ, 4dσ, 4fπ, 4fσ, 5gσ, and 6iσ electronic states of the H₂⁺ ion employing the Rydberg generalized function. From these fittings, the spectroscopic constants and the rovibrational energies have been determined by two distinct methods: Dunham's and the discrete variable representation. The theoretically obtained results are in a satisfactory agreement and are expected to provide a comparison source to future works in the experimental field. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

钙钛矿CH3NH3PbI3晶体的电化学

电化学方波伏安及循环伏安测量表明,钙钛矿CH₃NH₃PbI₃晶体在有机电解质中的氧化还原过程伴随着化学降解。该化学降解源于CH₃NH₃PbI₃晶体中铅离子的还原以及碘离子的氧化。通过电化学伏安法可以测定晶体的能带。     

3-cyclobutyl-3-ferrocenylcyclopropene and 3-cyclobutylidene-3-ferrocenylpropyne Synthesis and chemical properties

3-Cyclobutyl-3-ferrocenylcyclopropene was synthesized by the reactions of mono- or dibromoferrocenylcyclopropanes with Bu^tOK in DMSO. Treatment of dibromoferro-cenylcyclopropane with Bu^tOK in THF afforded 3-cyclobutylidene-3-ferrocenylpropyne in 52% yield. Heterolysis of the C-C bond in the three-membered ring of 3-cyclobutyl-3-ferrocenylcyclopropene at low and high temperatures was studied. Hydrolysis yielded 3-cyclobutyl-1H-cyclopentaferrocene and products with linear structures,viz., 3-cyclobutylidene-3-ferrocenylpropene,E- andZ-I-ferrocenyl-1-cyclobutylpropenes, and 1-cyclobutylidene-1-ferrocenylacetone. Cyclopropene reacts with 1,3-diphenylisobenzofuran to form two Diels-Alder adducts, while the enyne does not react with 1,3-diphenylbenzofuran. Facultad de Quimica, Universidad Nacional Autónoma de México, Cd. Universitaria, C.P. 04510, México D. F., México. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2177–2181, November, 1999.     

Synthesis and Dehydrobromination of 3-Bromomethyl- and 3-Bromo-3-methoxymethylcyclobutane-1-carbonitriles and Methyl 3-Bromomethyl- and 3-Bromo-3-methoxymethylcyclobutane-1-carboxylates

The anti-Markownikoff products of bromination and bromomethoxylation of 3-methylenecyclobutane-1-carbonitrile and methyl 3-methylenecyclobutane-1-carboxylate were subjected to dehydrobromination by the action of potassium tert-butoxide in THF. The reaction takes two elimination pathways: 1,3-dehydrobromination to give bicyclobutane derivatives and 1,2-dehydrobromination leading to substituted methylenecyclobutane. Structural factors in the substrate were revealed, which are responsible for the ratio of the two concurrent elimination processes.     

Addition of NH3 to Al3O3-

Recent computational studies on the addition of ammonia (NH3) to the Al3O3- cluster anion [A. Guevara-Garcia, A. Martinez, and J. V. Ortiz, J. Chem. Phys. 122, 214309 (2005)] have motivated experimental and additional computational studies, reported here. Al3O3- is observed to react with a single NH3 molecule to form the Al3O3NH3- ion in mass spectrometric studies. This is in contrast to similarly performed studies with water, in which the Al3O5H4- product was highly favored. However, the anion PE spectrum of the ammoniated species is very similar to that of Al3O4H2-. The adiabatic electron affinity of Al3O3NH3 is determined to be 2.35(5) eV. Based on comparison between the spectra and calculated electron affinities, it appears that NH3 adds dissociatively to Al3O3-, suggesting that the time for the Al3O3-NH3 complex to either overcome or tunnel through the barrier to proton transfer (which is higher for NH3 than for water) is short relative to the time for collisional cooling in the experiment.     

Synthesis and Upconversion Luminescence in LaF3:Yb3+, Ho3+, GdF3: Yb3+, Tm3+ and YF3:Yb3+, Er3+ obtained from Sulfide Precursors

Rare earth fluorides are mainly obtained from aqueous solutions of oxygen‐containing precursors. Probably, this method is simple and efficient, however, oxygen may partially be retained in the fluoride structure. We offer an alternative method: obtaining fluorides and solid solutions based on them from an oxygen‐free precursor. As starting materials, we choose sulfides of rare‐earth elements and solid solutions based on them. The fluorination is carried out by exposure to hydrofluoric acid of various concentrations. The transmission electron microscopy images revealed the different morphologies of the products, which depend on the concentration of the fluorinating component (HF) and the host element. The solid solution particle size varied from 30–35 nm in the case of GdF₃:Yb³⁺, Tm³⁺ (4 % HF) to larger structures with dimensions exceeding 200 nm, such as that for LaF₃:Yb³⁺, Ho³⁺ (40 % HF). The thermal characteristics, such as the temperatures of the transitions and melting and enthalpies, were determined for the solid solutions and simple fluorides. Applicability of the materials obtained as biological luminescent markers was tested on the example of upconversion luminescence, and good upconversion properties were detected.     

Diagrammes de phases des systemes binaires KNO3-CsNO3 et KNO3-NaNO3

(K?Na)NO₃ and (K?Cs)NO₃ phase diagrams were drawn using a simultaneous thermal analysis technique in the range 373 to 623 K. The first phase diagram shows a minimum freezing equimolar mixture at 494 K, a continuous solid solution in equilibrum with liquid phase and an eutectic mixture (88 molar % of KNO₃) at 380 K. The second one exhibits an invariant at 400 K corresponding to the KNO₃ solid-solid transition, an eutectoid mixture at 10 molar % of KNO₃ and 418 K involving the CsNO₃ solid-solid transition and an eutectic mixture at 60 molar % of KNO₃ and 495 K.     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

Non-Isothermal Kinetics of the Decomposition Reaction of Cluster [Ag3WS3Br]（PPh3）3 and [Cu3WS3Br]（PPh3）3

The thermal behaviors of clusters [Ag3WS3Br](PPh3)3 and [Cu3WS3Br](PPh3)3 (PPh3=triphenyl phosphine) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC and EDS techniques. The results showed that the evolution of PPh3 generally proceeded before the release of the other moiety in one or two step-mode. The mechanisms, the kinetic and the thermodynamic parameters for decomposition of PPh3 of both clusters were determined and calculated by jointly using several methods, which showed that its evolution was controlled by Avrami-Erofeev equation. The results also showed that there was no new stable phase composed of W-Ag(Cu)-S-Br after release of organic moiety PPh3 and that CVD method was not applicable to their further processing.     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

Beam-foil lifetime data for 3s 3p 3 and 3s 2 3p 3d levels of Si-like Ni14+

In the EUV spectrum of foil-excited 24 MeV Ni ions the decays of the 3s 3p ³ and 3s ² 3p 3d levels to the 3s ² 3p ² levels of the ground configuration have been observed. For most of the levels decay curves have been obtained. The lifetime results compare well with predictions from semi-empirically scaled HXR calculations. Some problems with cascade repopulations will be discussed.     

3, 3, 3-Trifluoropropyl(methyl)cyclosiloxanes

The influence of the number of 3, 3, 3-trifluoropropyl(methyl)siloxane links (Φ/Φ) in the cyclotetrasiloxanes Φ_mD_4-m, where D represents the dimethylsiloxane link and m=0–4, on the rearrangement of these compounds in acetone solution under the action of sodium siloxanolate has been studied. The rearrangement takes place with the formation of a linear polysiloxane the degradation of which yields, in addition to the initial ring, cyclosiloxanes with a different structure. The rate of rearrangement of Φ_mD_4-m and of the formation of a linear polysiloxane rises with an increase in m from 0 to 3. The equilibrium concentration of the linear polysiloxane formed from Φ_mD_4-m is inversely proportional to m. Results have been obtained on the kinetics of the formation of the cyclosiloxanes Φ_mD_n, where m=0–5, n=0–5, and m+n=3–6, in the rearrangement of the rings ΦD₃, Φ₂D₂, Φ₃D, and Φ₄. The reactivity of the siloxane links rises in the sequence ～ (CH₃)₂Si-O-Si(CH₃)₂ ～<～ (CF₃CH₂CH₂)-(CH₃) Si-O-Si(CH₃)₂ ～<(CF₃CH₂CH₂) (CH₃)Si-O-Si(CH₃) (CH₂CH₂CF₃) ～. Because of the negative inductive effect transferred through the siloxane links, the 3, 3, 3-trifluoropropyl groups strongly activate the siloxane ring with respect to nucleophiiic reagents.     

Intermolecular vibrational spectra of C3v CXY3 Molecular Liquids, CHCl3, CHBr3, CFBr3, and CBrCl3

We report the quality anisotropic intermolecular vibrational spectra within the frequency range 0.5-800 cm(-1) of four C(3v) CXY(3) molecular liquids, CHCl(3), CHBr(3), CFBr(3), and CBrCl(3), by means of femtosecond optical-heterodyne-detected Raman-induced Kerr effect spectroscopy. The results show that the first moment of the intermolecular vibrational spectrum is proportional to the square root of the value of the surface tension divided by the liquid density. This implies that the intermolecular vibrational spectrum reflects the bulk properties of the liquids. To understand the molecular-level aspects of the intermolecular vibrational spectra of the liquids, the spectra are compared with the molecular properties such as molecular weight, rotational constants, and bimolecular interaction energy. Overall, the first moment of the spectrum moderately correlates to the inverse square roots of both the molecular weight and the fast rotational constant. Therefore, the molecular properties are responsible for the intermolecular vibrational spectrum. Plots of the first moment of the intermolecular vibrational spectrum vs the square root of the value of the simple bimolecular interaction energy divided by the molecular surface area and the molecular weight show a linear correlation in the case of the oblate symmetric top molecular liquids, CHCl(3), CHBr(3), and CFBr(3). However, CBrCl(3), which is a prolate symmetric top molecular liquid, does not show the same correlation for the oblate molecular liquids.     

Verfeinerung der Kristallstrukturen von KN3, RbN3, CsN3 und TIN3

Crystal structure refinements of KN₃, RbN₃, CsN₃, and TIN₃ The crystal structures of the isostructural compounds KN₃, RbN₃, CsN₃ and TIN₃ were refined by the method of least-squares using new X-ray diffraction data. The substances crystallize in a tetragonal variety of the CsCl type (space group I4/mcm) with four formula units per unit cell. The metal ions are surrounded by eight closest N atoms in a distorted quadratic antiprismatic arrangement at distances which correspond to the sum of the ionic radii. The azide ions are strictly linear and symmetrical with N — N bond lengths of 1.16 to 1,18 Å.