Se-decorated SnO2/rGO composite spheres and their sodium storage performances

SnO₂ is considered a promising anode material for sodium-ion batteries due to its high theoretical capacity and low cost.However,the poor electrical conductivity and dramatic volume variation during cha rge/discharge cycling is a major limitation in its practical applicability.Here we propose a simple onepot spray pyrolysis process to construct unique pomegranate-like SnO₂/rGO/Se spheres.The ideal structural configuration of these architectures was effective in alleviating the large volume variation of SnO₂,besides facilitating rapid electron transfer,allowing the devised anode to exhibit superior sodium sto rage performances in terms of capacity(506.7 mAh/g at 30 mA/g),cycle performance(397 mAh/g after100 cycles at 50 mA/g) and rate capability(188.9 mAh/g at an ultrahigh current density of 10 A/g).The experimental evidence confirms the practical workability of p-SnO₂/rGO/Se spheres in SIBs.     

Graphene-supported cobalt nanoparticles used to activate SiO2-based anode for lithium-ion batteries

Although SiO₂-based anode is a strong competitor to supersede graphite anode for lithium-ion batteries, it still has problems such as low electrochemical activity, enormous loss of active lithium, and serious volume expansion. In order to solve these problems, we used a graphene network loaded with cobalt metal nanoparticles (rGO–Co) to coat SiO₂ porous hollow spheres (SiO₂@rGO–Co). The construction of porous hollow structure and graphene network can shorten the lithium-ion (Li⁺) diffusion distance and enhance the conductivity of the composite, which improves the electrochemical activity of SiO₂ effectively. They also alleviate the volume expansion of the anode in the cycling process. Moreover, nano-scale cobalt metal particles dispersed on graphene catalyze the conversion reaction of SiO₂ and activate the locked Li⁺ in Li₂O through a reversible reaction, which improves the charge and discharge capacity of the anode. The capacity of SiO₂@rGO–Co reaches 370.4 mAh/g after 100 cycles at 0.1 A/g, which is 6.19 times the capacity of pure SiO₂ (59.8 mAh/g) under the same circumstance. What is more, its structure also exhibits excellent cycle stability, with a volume expansion rate of only 13.0% after 100 cycles at a current density of 0.1 A/g.     

The design and fabrication of Co_3O_4/Co_3V_2O_8/Ni nanocomposites as high-performance anodes for Li-ion batteries

The Co_3O_4/Co_3V_2O_8/Ni nanocomposites were rationally designed and prepared by a two-step hydrothermal synthesis and subsequent annealing treatment. The one-dimensional(1D) Co_3O_4 nanowire arrays directly grew on Ni foam, whereas the 1D Co_3V_2O_8 nanowires adhered to parts of Co_3O_4 nanowires.Most of the hybrid nanowires were inlayed with each other, forming a 3D hybrid nanowires network.As a result, the discharge capacity of Co_3O_4/Co_3V_2O_8/Ni nanocomposites could reach 1201.8 mAh/g after100 cycles at 100 mA/g. After 600 cycles at 1 A/g, the discharge capacity was maintained at 828.1 mAh/g.Moreover, even though the charge/discharge rates were increased to 10 A/g, it rendered reversible capacity of 491.2 mAh/g. The superior electrochemical properties of nanocomposites were probably ascribed to their unique 3D architecture and the synergistic effects of two active materials. Therefore, such Co_3O_4/Co_3V_2O_8/Ni nanocomposites could potentially be used as anode materials for high-performance Li-ion batteries.     

MnS hollow microspheres combined with carbon nanotubes for enhanced performance sodium-ion battery anode

MnS as anode material for sodium-ion batteries (SIBs) has recently attracted great attention because of the high theoretical capacity, great natural abundance, and low cost. However, it suffers from inferior electrical conductivity and large volume expansion during the charge/discharge process, leading to tremendous damage of electrodes and subsequently fast capacity fading. To mitigate these issues, herein, a three-dimensional (3D) interlaced carbon nanotubes (CNTs) threaded into or between MnS hollow microspheres (hollow MnS/CNTs composite) has been designed and synthesized as an enhanced anode material. It can effectively improve the electrical conductivity, buffer the volume change, and maintain the integrity of the electrode during the charging and discharging process based on the synergistic interaction and the integrative structure. Therefore, when evaluated as anode for SIBs, the hollow MnS/CNTs electrode displays enhanced reversible capacity (275 mAh/g at 100 mA/g after 100 cycles), which is much better than that of pure MnS electrode (25 mAh/g at 100 mA/g after 100 cycles) prepared without the addition of CNTs. Even increasing the current density to 500 mA/g, the hollow MnS/CNTs electrode still delivers a five times higher reversible capacity than that of the pure MnS electrode. The rate performance of the hollow MnS/CNTs electrode is also superior to that of pure MnS electrode at various current densities from 50 mA/g to 1000 mA/g.     

多孔纳米立方FeSe2/石墨烯复合材料的可控构建及在钠离子电池中的应用

设计具有较高比容量和循环稳定性的负极材料对于钠离子电池的发展至关重要。过渡金属硒化物因其具有较高的理论容量而成为潜在的负极材料。但是,硒化物电导率低下且在钠离子嵌入/脱出的过程中会发生较大程度的体积膨胀,导致比容量快速下降。因此,结构调控显得尤为重要。通过常规水热法在二维还原氧化石墨烯（rGO）上原位生长多孔纳米立方体FeSe₂,制备了具有更多活性位点和结构更加稳定的FeSe₂/rGO复合材料。当用作钠离子电池的负极时,复合材料FeSe₂/rGO在0.2 A/g时比容量为694.6 mA?h/g,在2.0 A/g电流密度下,循环300圈后比容量为300 mA?h/g。     

Ni3S2@碳纳米管复合材料的制备及其储钠性能

采用一步固相煅烧工艺制备了碳纳米管原位封装Ni₃S₂纳米颗粒（Ni₃S₂@CNT）,并研究了其作为钠离子电池（SIBs）负极材料的电化学性能. 通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、循环伏安测试、恒流充放电以及交流阻抗等研究了Ni₃S₂@CNT的物相结构、形貌特征以及电化学性能. 电化学测试表明,材料在100 mA·g ^-1电流密度下,放电容量可以达到541.6 mAh·g ^-1,甚至在2000 mA·g ^-1的大电流密度下其放电比容量也可以维持在274.5 mAh·g ^-1. 另外,材料在100 mA·g ^-1电流密度下,经过120周充放电循环后其放电和充电比容量仍然可以保持在374.5 mAh·g ^-1和359.3 mAh·g ^-1,说明其具有良好倍率性能和循环稳定性能. 良好的电化学性能归因于这种独特的碳纳米管原位封装Ni₃S₂纳米颗粒结构. 碳纳米管不但可以提高复合材料的导电性,也可以缓冲Ni₃S₂纳米颗粒在反复充放电过程中产生的体积膨胀效应,明显改善了Ni₃S₂@CNT负极复合材料的电化学性能.     

Synthesis of iron oxide cubes/reduced graphene oxide composite and its enhanced lithium storage performance

Fe₃O₄ is considered as a promising electrode material for lithium-ion batteries(LIBs) due to its low cost and high theoretical capacity(928 mAh/g).Nevertheless,the huge volume expansion and poor conductivity seriously hamper its practical applications.In this study,we use a facile hydrothermal reaction together with a post heat treatment to construct the three-dimensional heterostructured composite(Fe₃O₄/rGO) inwhich reduced graphene oxide sheets wraped the Fe₃O₄ submicron cubes as the conductive network.The electric conduction and electrode kinetics of lithium ion insertion/extraction reaction of the composite is enhanced due to the assist of conductive rGO,and thus the Listorage performance is obviously improved.The composite exhibits a reversible charge capacity of772.1 mAh/g at the current density of 0.1 A/g,and the capacity retention reaches 70.3% after400 cycles at0.5 A/g,demonstrating obviously higher specific capacity and rate capability over the Fe₃O₄ submicron cubes without rGO,and much superior cycling stability to the parent Fe_2 O_3 submicron cubes without rGO.On the other hand,as a synergic conductive carbon support,the flexible rGO plays an important role in buffering the large volume change during the repeated discharge/charge cycling.     

Unraveling the stabilization mechanism of solid electrolyte interface on ZnSe by rGO in sodium ion battery

Transition metal selenides have been widely studied as anode materials of sodium ion batteries(SIBs),however,the investigation of solid-electrolyte-interface(SEI)on these materials,which is critical to the electrochemical performance of SIBs,remains at its infancy.Here in this paper,ZnSe@C nanoparticles were prepared from ZIF-8 and the SEI layers on these electrodes with and without reduced graphene oxide(rGO)layers were examined in details by X-ray photoelectron spectroscopies at varied charged/discharged states.It is observed that fast and complicated electrolyte decomposition reactions on ZnSe@C leads to quite thick SEI film and intercalation of solvated sodium ions through such thick SEI film results in slow ion diffusion kinetics and unstable electrode structure.However,the presence of rGO could efficiently suppress the decomposition of electrolyte,thus thin and stable SEI film was formed.ZnSe@C electrodes wrapped by rGO demonstrates enhanced interfacial charge transfer kinetics and high electrochemical performance,a capacity retention of 96.4%,after 1000 cycles at 5 A/g.This study might offer a simple avenue for the designing high performance anode materials through manipulation of SEI film.     

Ca_2Nb_2O_7 as a Novel Open-framework Anode Material for Potassium-ion Batteries

Potassium-ion batteries(KIBs)are a promising alternative to Lithium-based energy storage systems owning to the low cost and rich abundance of potassium resources,but are facing challenges in designing low-cost hosts that can reversibly accommodate large-size K⁺with fast diffusion kinetics.Herein,we report a novel 3D inorganic open framework of Ca₂Nb₂O₇(CNO)as an anode for KIBs.The open framework structure affords interstitial vacancies available for storing K⁺and allows a facile diffusion of K⁺,thus resulting in excellent structural stability and fast reaction kinetics.The CNO electrode delivers a reversible specific capacity of 65.3 and 52.2 mAh/g at 5 and 10 mA/g,respectively.Moreover,CNO exhibits excellent long-term cyclability with 92.53%capacity retention over 700 cycles at 10 mA/g.This will trigger more investigations into open-framework-based materials for stable and fast KIBs.     

Flower-like Spherical α-Ni(OH)2 Derived NiP2 as Superior Anode Material of Sodium-Ion Batteries

Transition metal phosphides (TMPs) are promising anode candidates for sodium-ion batteries, due to their high theoretical specific capacity and working potential. However, the low conductivity and excessive volume variation of TMPs during insertion/extraction of sodium ions result in a poor rate performance and long-term cycling stability, largely limiting their practical application. In this paper, NiP₂ nanoparticles encapsulated in three-dimensional graphene (NiP₂@rGO) were obtained from the flower-like spherical α-Ni(OH)₂ by phosphating and carbon encapsulation processes. When used as a sodium-ion batteries anode material, the NiP₂@rGO composite shows an excellent cycling performance (117 mA h g⁻¹ at 10 A g⁻¹ after 8000 cycles). The outstanding electrochemical performance of NiP₂@rGO is ascribed to the synergistic effect of the rGO and NiP₂. The rGO wrapped on the NiP₂ nanoparticles build a conductive way, improving ionic and electronic conductivity. The effective combination of NiP₂ nanoparticles with graphene greatly reduces the aggregation and pulverization of NiP₂ nanoparticles during the discharge/charge process. This study may shed light on the construction of high-performance anode materials for sodium-ion batteries and to other electrode materials.     

Enhanced Anode Performances of Polyaniline-TiO(2)-Reduced Graphene Oxide Nanocomposites for Lithium Ion Batteries

Here, we report a three-layer-structured hybrid nanostructure consisting of transition metal oxide TiO(2) nanoparticles sandwiched between carbonaceous polymer polyaniline (PANI) and graphene nanosheets (termed as PTG), which, by simultaneously hindering the agglomeration of TiO(2) nanoparticles and enhancing the conductivity of PTG electrode, enables fast discharge and charge. It was demonstrated that the PTG exhibited improved electrochemical performance compared to pure TiO(2). As a result, PTG nanocomposite is a promising anode material for highly efficient lithium ion batteries (LIBs) with fast charge/discharge rate and high enhanced cycling performance [discharge capacity of 149.8 mAh/g accompanying Coulombic efficiency of 99.19% at a current density of 5C (1000 mA/g) after 100 cycles] compared to pure TiO(2). We can conclude that the concept of applying three-layer-structured graphene-based nanocomposite to electrode in LIBs may open a new area of research for the development of practical transition-metal oxide graphene-based electrodes which will be important to the progress of the LIBs science and technology.     

锂离子电池Sn-SBA15负极材料的复合电镀制备及其性能

应用复合电镀法制备Sn-SBA15电极.充放电测试得其初始放电(嵌锂)容量,达到1075mAh/g.充电(脱锂)容量为630mAh/g,经过50周循环后充放电容量均保持在400 mAh/g以上.XRD分析表明,Sn-SBA15电极具有四方晶型锡结构;而SEM观察到电极表面的蜂窝状结构.交流阻抗谱结果显示,Sn-SBA15电极表面有SEI膜的生成.     

Facile preparation of core-shell Si@Li_4Ti_5O_(12) nanocomposite as large-capacity lithium-ion battery anode

As a promising alternative anode material,silicon(Si)presents a larger capacity than the commercial anode to achieve large capacity lithium-ion batteries.However,the application of pure Si as anode is hampered by limitations such as volume expansion,low conductivity and unstable solid electrolyte interphase.To break through these limitations,the core-shell Si@Li_4Ti_5O_(12)nanocomposite,which was prepared via in-situ self-assembly reaction and decompressive boiling fast concentration method,was proposed in this work.This anode combines the advantages of nano-sized Si particle and pure Li_4Ti_5O_(12)(LTO)coating layer,improving the performance of the lithium-ion batteries.The Si@Li_4Ti_5O_(12)anode displays a high initial discharge/charge specific capacity of 1756/1383 m Ah g~(-1)at 500 m A g~(-1)(representing high initial coulombic efficiency of 78.8%),a large rate capability(specific capacity of 620 m Ah g~(-1)at4000 m A g~(-1)),an outstanding cycling stability(reversible specific capacity of 883 m Ah g~(-1)after 150 cycles)and a low volume expansion rate(only 3.3%after 150 cycles).Moreover,the synthesis process shows the merits of efficiency,simplicity,and economy,providing a reliable method to fabricate large capacity Si@Li_4Ti_5O_(12)nanocomposite anode materials for practical lithium-ion batteries.     

三维多孔还原氧化石墨烯气凝胶的制备及其在锂离子电池中的应用

以天然鳞片石墨为原料,采用改良的Hummers方法,制备了高纯度的薄层或单层氧化石墨(GO);并以抗坏血酸为还原剂,通过自组装还原的方式成功制备了具有三维多孔独巨石结构的还原氧化石墨烯(rGO)气凝胶,其形貌和结构经FT-IR, SEM, TEM, XRD和XPS表征。并对其作为锂离子电池负极材料的电化学性能进行了测试。结果表明：rGO气凝胶独特的形貌和结构提高了其比容量和循环性能,在100 mA·g^-1电流密度下首周放电比容量可达1 700 mAh·g^-1,首周充电比容量达710 mAh·g^-1,经过100周循环后放电比容量仍可保持在450 mAh·g^-1,库伦效率保持在98%。     

NiSe2 nanoparticles encapsulated in CNTs covered and N-doped TiN/carbon nanofibers as a binder-free anode for advanced sodium-ion batteries

Metal selenides are promising anodes for sodium-ion batteries (SIBs) due to the high theoretical capacity through conversion reaction mechanism. However, developing metal selenides with superior electrochemical sodium-ion storage performance is still a great challenge. In this work, a novel composite material of free-standing NiSe₂ nanoparticles encapsulated in N-doped TiN/carbon composite nanofibers with carbon nanotubes (CNTs) in-situ grown on the surface (NiSe₂@N-TCF/CNTs) is prepared by electrospinning and pyrolysis technique. In this composite materials, NiSe₂ nanoparticles on the surface of carbon nanofibers were encapsulated into CNTs, thus avoiding aggregation. The in-situ grown CNTs not only improve the conductivity but also act as a buffer to accommodate the volume expansion. TiN inside the nanofibers further enhances the conductivity and structural stability of carbon-based nanofibers. When directly used as anode for SIBs, the NiSe₂@N-TCF/CNT electrode delivered a reversible capacity of 392.1 mAh/g after 1000 cycles and still maintained 334.4 mAh/g even at a high rate of 2 A/g. The excellent sodium-ion storage performance can be attributed to the fast Na⁺ diffusion and transfer rate and the pseudocapacitance dominated charge storage mechanism, as is evidenced by kinetic analysis. The work provides a novel approach to the fabrication of high-performance anode materials for other batteries.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Design of hierarchical and mesoporous FeF3/rGO hybrids as cathodes for superior lithium-ion batteries

Iron fluoride (FeF₃) is considered as a promising cathode material for Li-ion batteries (LIBs) due to its high theoretical capacity (712 mAh/g) with a 3e^? transfer. Herein, we have designed a strategy of hierarchical and mesoporous FeF₃/rGO hybrids for LIBs, where the hollow FeF₃ nanospheres are the main contributor to the specific capacity and the 2D rGO nanosheets are the matrix elevating the electronic conductivity and buffering the volume expansion. The unique FeF₃/rGO hybrid can be rationally synthesized by a non-aqueous in-situ precipitation method, offering the merits of large specific surface area with rich active sites, fast transport channels for lithium ions, effective alleviation of volume expansion during cycles, and accelerating the electrochemical reaction kinetics. The FeF₃/rGO hybrid electrode possesses a high initial discharge capacity of 553.9 mAh/g at a rate of 0.5 C with 378 mAh/g after 100 cycles, acceptable rate capability with 168 mAh/g at 2 C, and feasible high-temperature operation (320 mAh/g at 70 °C). The superior electrochemical behaviors presented here demonstrates that the FeF₃/rGO hybrid is a potential electrode for LIBs, which may open up a new vision to design high-efficiency energy-storage devices such as LIBs based on transition metal fluorides.     

Design and green synthesis of 1-(4-ferrocenylbutyl)piperazine chemically grafted reduced graphene oxide for supercapacitor application

In this paper, we report the green synthesis of 1-(4-ferrocenylbutyl)piperazine chemically grafted rGO (P.Fc/rGO) as a battery-type supercapacitor electrode material. For this purpose, initially, the ability of the aqueous Damson fruit extract is investigated in the reduction reaction of graphene oxide (GO). 1-(4-ferrocenylbutyl)piperazine (P.Fc) is synthesized via nucleophilic substitution reaction of piperazine with as-synthesized 4-chlorobutylferrocene. In continue, P. Fc is incorporated to GO by ring-opening reaction of epoxide groups on the GO surface. In the next step, the modified reduction method by aqueous Damson fruit extract was used to prepare the P.Fc/rGO from P.Fc/GO. The prepared materials were characterized by various techniques including FT-IR, Uv–vis, XRD, SEM, EDX, and BET. N₂ adsorption–desorption data of P.Fc/rGO nanocomposite shows that the surface area is 37.746 m² g⁻¹. The capability of P.Fc/rGO nanocomposite for using as an energy storage electrode material in battery-type supercapacitor was examined by investigation of its electrochemical behavior by CV, EIS, and GCD measurements. The charge storage capacity of 1,102 mAh g⁻¹ is achieved at 2.5 A g⁻¹. This nanocomposite shows 89% retention of charge storage capacity after 2000 CV cycles.     

Niobium oxyphosphate nanosheet assembled two-dimensional anode material for enhanced lithium storage

The development of high-capacity and high-rate anodes has become an attractive endeavor for achieving high energy and power densities in lithium-ion batteries(LIBs).Herein,a new-type anode material of reduced graphene oxide(rGO) supported niobium oxyphosphate(NbOPO_4) nanosheet assembled twodimensional composite material(NbOPO_4/rGO) is firstly fabricated and presented as a promising highperformance LIB anode material.In-depth electrochemical analyses and in/ex situ characterizations reveal that the intercalation-conversion reaction takes place during the first discharge process,followed by the reversible redox process between amorphous NbPO_4 and Nb which contributes to the reversible capacity in the subsequent cycles.Meanwhile,the lithiation-generated Li3 PO_4,behaving as a good lithium ion conductor,facilitates ion transport.The rGO support further regulates the structural and electron/ion transfer properties of NbOPO_4/rGO composite compared to neat NbOPO_4, resulting in greatly enhanced electrochemical performances.As a result,NbOPO_4/rGO as a new-type LIB anode material achieves a high capacity of 502.5 mAh g^-1 after 800 cycles and outstanding rate capability of 308.4 mAh g^-1 at 8 A g^-1.This work paves the way for the deep understanding and exploration of phosphate-ba sed high-efficiency anode materials for LIBs.     

Carbonyl-rich Poly(pyrene-4,5,9,10-tetraone Sulfide) as Anode Materials for High-Performance Li and Na-Ion Batteries

Organic carbonyl electrode materials are widely employed for alkali metal-ion secondary batteries in terms of their sustainability, structure designability and abundant resources. As a typical redox-active organic electrode materials, pyrene-4, 5, 9, 10-tetraone (PT) shows high theoretical capacity due to the rich carbonyl active sites. But its electrochemical behavior in secondary batteries still needs further exploration. Herein, PT-based linear polymers (PPTS) is synthesized with thioether bond as bridging group and then employed as an anode material for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). As expected, PPTS shows improved conductivity and insolubility in the non-aqueous electrolyte. When used as an anode material for LIBs, PPTS delivers a high reversible specific capacity of 697.1 mAh g⁻¹ at 0.1 A g⁻¹ and good rate performance (335.4 mAh g⁻¹ at 1 A g⁻¹). Moreover, a reversible specific capacity of 205.2 mAh g⁻¹ at 0.05 A g⁻¹ could be obtained as an anode material for SIBs.