Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.     

Electrochemical performance comparison between β-type mixed nickel cobalt hydroxides prepared by various synthesis routes

Cobalt is usually co-precipitated with nickel to improve the nickel hydroxide electrode capacity. Herein, we present the acquirement of β-type mixed Ni/Co phases by three different synthetic routes. The first method consists of the electrochemical removal of Li from LiNi_1–xCo_xO₂ compounds to form Ni_1–xCo_xO₂ compounds that are then reduced in a KOHhydrogen peroxide medium to produce Ni_1–xCo_x(OH)₂. The second method deals with the aging of α-type mixed Ni/Co hydroxides in 8M KOH solution at 60 °C. Finally, the third method consists of the direct precipitation of Ni and Co sulfates using the right sequence and amount of NH₄OH and NaOH bases. A constant capacity was found, independently of the amount of Co, for samples prepared from a lithiated precursor, in total contrast with samples prepared from the aging and precipitation processes that show a maximum capacity near x=0.1. We explain such a different electrochemical behavior, based on material morphology and surface area arguments. Moreover, we show that cobalt addition in the nickel network enhances the stability of the β(III) phase.     

Effect of electronic state of ions on the electrochemical properties of layered cathode materials LiNi1−2x Co x Mn x O2

The cathode materials of the composition LiNi_{1 − 2x} Co _x Mn _x O₂ (x = 0.1, 0.2. 0.33) synthesized from the Ni, Co, Mn mixed hydroxides and LiOH by using mechanical activation method are studied. It is shown that all synthesized compounds have layered structure described by the space group R-3m. With the decreasing of the nickel content the cell volume and the degree of structure disordering decrease. According to XPS data, the electronic main state of d-ions at the prepared samples’ surfaces corresponds to Ni²⁺, Co³⁺, and Mn⁴⁺. An increase in the nickel content leads to the increase of the Ni2p _3/2 and Co2p _3/2 binding energy, which points to the change in the Me-O bond covalence. According to magnetic susceptibility measurements data, the nickel ions in LiNi_0.6Co_0.2Mn_0.2O₂ exist in the two oxidation states: Ni²⁺ and Ni³⁺. It is shown that this sample has the highest specific discharge capacity (∼170 mAh/g). The positions of redox peaks in the differential capacitance curves depend on the sample composition: with the increasing of nickel content they are shifted toward lower voltages. Based on the paper presented in the IX International Conference “Basic Problems of Energy Conversion in Lithium Electrochemical Systems” (Ufa, 2006).     

Enhanced Electrochemical Capacitive Properties of Nickel‐Cobalt Oxide Nano‐flakes Materials

Nickel‐cobalt oxide nano‐flakes materials are successfully synthesized by a facile chemical co‐precipitation method followed by a simple calcination process. The studies show that the as‐prepared nickel‐cobalt oxides with different Ni/Co ratio are composed of NiO and Co₃O₄ compounds. The Co_0.56Ni_0.44 oxide material, which exhibits a mesoporous structure with a narrow distribution of pore size from 2 to 7 nm, possesses markedly enhanced charge‐discharge properties at high current density compared with the pure NiO and pure Co₃O₄. The Co_0.56Ni_0.44 oxide electrode shows a specific capacitance value of 1227 F/g at 5 mA/cm², which is nearly three times greater than that of the pure NiO electrode at the same current density.     

NixCo3-xO4表面修饰对CdSe/TiO2纳米管阵列光电化学氧化水活性的影响

利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。     

Sm0.5Sr0.5Co1−xNixO3−δ—A Novel Bifunctional Electrocatalyst for Oxygen Reduction/Evolution Reactions

The development of non-precious metal catalysts with excellent bifunctional activities is significant for air–metal batteries. ABO₃-type perovskite oxides can improve their catalytic activity and electronic conductivity by doping transition metal elements at B sites. Here, we develop a novel Sm_0.5Sr_0.5Co_1−xNi_xO_3−δ (SSCN) nanofiber-structured electrocatalyst. In 0.1 M KOH electrolyte solution, Sm_0.5Sr_0.5Co_0.8Ni_0.2O_3−δ (SSCN82) with the optimal Co: Ni molar ratio exhibits good electrocatalytic activity for OER/ORR, affording a low onset potential of 1.39 V, a slight Tafel slope of 123.8 mV dec⁻¹, and a current density of 6.01 mA cm⁻² at 1.8 V, and the ORR reaction process was four-electron reaction pathway. Combining the morphological characteristic of SSCN nanofibers with the synergistic effect of cobalt and nickel with a suitable molar ratio is beneficial to improving the catalytic activity of SSCN perovskite oxides. SSCN82 exhibits good bi-functional catalytic performance and electrochemical double-layer capacitance.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

Anodically electrodeposited Co+Ni mixed oxide electrode: preparation and electrocatalytic activity for oxygen evolution in alkaline media

Co+Ni mixed oxides on Ni substrate were prepared through anodic electrodeposition from Co(NO₃)₂ and Ni(NO₃)₂ aqueous solutions with five different Co²⁺/Ni²⁺ ratios beside only Co²⁺. By the electrochemical measurements, the optimum performance in electrocatalytic activity for oxygen evolution reaction in alkaline media was obtained on the Co+Ni mixed oxide deposited from the solution containing Co²⁺/Ni²⁺ ratio of 1:1. The mixed oxide is corresponding to about 68 at% Co contents with spinel-type NiCo₂O₄ phase and porosity surface structure. The electrochemical kinetic parameters including exchange current density, Tafel slopes, reaction order with respect to [OH⁻] and standard electrochemical enthalpy of activation were analyzed also. A possible mechanism involving the formation of a physisorbed hydrogen peroxide intermediate in a slow electrochemical step was presented, which accounts for the values of the experimental results.     

Formation of solid solution and its effect on lithium insertion schemes for advanced lithium-ion batteries: X-ray absorption spectroscopy and X-ray diffraction of LiCoO2, LiCo1/2Ni1/2O2 and LiNiO2

The X-ray absorption spectra (XAS) of LiCoO₂, LiCo_1/2Ni_1/2O₂ and LiNiO₂ were examined together with X-ray diffraction (XRD). Co and Ni K-edge XANES spectra of LiCo_1/2Ni_1/2O₂ are quite similar to that of LiCoO₂ or LiNiO₂, suggesting that electronic states of Co and Ni in LiCo_1/2Ni_1/2O₂ are Co³⁺ and Ni³⁺. Analytical results of Co and Ni K-edge EXAFS oscillations on the first coordination shell of nickel and cobalt ions in LiCo_1/2Ni_1/2O₂ indicate that the local environment around the targeted species is the same as that in LiCoO₂ or LiNiO₂. Since there is no doubt about the crystal and electronic structures of LiCoO₂ and LiNiO₂, the results indicate that LiCo_1/2Ni_1/2O₂ consists of low-spin states of Co³⁺ and Ni³⁺ distributed at equivalent positions in triangular lattice of sites forming homogeneous transition metal oxide layers. Thus, XAS complements XRD in describing solid solution LiCo_1/2Ni_1/2O₂ of LiCoO₂ and LiNiO₂. The electrochemical behaviors of LiCoO₂, LiCo_1/2Ni_1/2O₂ and LiNiO₂ are also restated and the effects of the formation of solid solution on the change in lattice dimension during topotactic electrochemical reactions are discussed.     

Syntheses and structural characterizations of a new benzyl(4-methoxyphenyl)dithiophosphinic acid and its Ni(II), Co(II), Zn(II), Cd(II), and Ni–pyridine complexes

Benzyl(4-methoxyphenyl)dithiophosphinic acid (HL) was obtained as solid and was treated with the NiCl₂6H₂O, CoCl₂6H₂O, ZnCl_2, and CdCl₂ to prepare its Ni(II), Co(II), Zn(II), and Cd(II) complexes. The nickel complex was further treated with pyridine which led to the formation of octahedral dipyridine derivative. HL was obtained through the addition reaction of the perthiophosphonic acid anhydride Lawesson reagent, (LR), [2,4-bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane-2,4-disulfide], with the corresponding Grignard compound (benzylmagnesium bromide) in diethyl ether medium.

The complexes were all of the stoichiometry of [M(L)₂]_x, with x = 1 for M = Ni²⁺ and x = 2 for M = Co²⁺, Cd²⁺ and Zn²⁺. The coordination geometry was square planar in the nickel(II) complex and tetrahedral in the others. Similar to many other nickel(II) complexes, the Ni(L)₂ reacts reversibly with pyridine to yield the octahedral complex ({(Py)₂Ni(L)₂}).

The compounds were characterized by elemental analysis; MS, FTIR, and Raman spectroscopies. The magnetic susceptibilities of the complexes were measured to confirm the hybridization patterns and the geometries. Single-crystal X-ray analyses of Ni(L)₂ and [Co(L)₂]₂ complexes were also carried out to prove the molecular topologies.     

Magnetische Messungen in den Systemen Co—Se,Ni—Se und Co—Ni—Se

The magnetic behavior of the binary systems Co?Se and Ni?Se was investigated within the temperature region from 100 to 300 K. Both phases Co_1?x Se and CoSe₂ behave like antiferromagnetics following theCurie-Weiss law with magnetic moments between 2.22 and 3.16 μ_B. For the corresponding phases Ni_1?x Se and NiSe₂ the results indicate a feeblePauli paramagnetism. For some alloys a slight positive temperature coefficient could be observed. Three quasibinary sections of the ternary phase (Co_1?y Ni _y )_1?x Se and one section of (Co_1?y Ni _y )Se₂ were investigated in the ternary system Co?Ni?Se. For all sections the increase of the Ni-content resulted in a continuous shift fromCurie-Weiss behavior toPauli paramagnetism. Due to the change from negative to positive temperature coefficients some ternary alloys have a temperature-invariant paramagnetism.     

Superionic Conduction in Co‐Vacant P2‐NaxCoO2 Created by Hydrogen Reductive Elimination

The layered P2‐Na_xMO₂ (M: transition metal) system has been widely recognized as electronic or mixed conductor. Here, we demonstrate that Co vacancies in P2‐Na_xCoO₂ created by hydrogen reductive elimination lead to an ionic conductivity of 0.045 S cm^?1 at 25 °C. Using in situ synchrotron X‐ray powder diffraction and Raman spectroscopy, the composition of the superionic conduction phase is evaluated to be Na_0.61(H₃O)_0.18Co_0.93O₂. Electromotive force measurements as well as molecular dynamics simulations indicate that the ion conducting species is proton rather than hydroxide ion. The fact that the Co‐stoichiometric compound Na_x(H₃O)_yCoO₂ does not exhibit any significant ionic conductivity proves that Co vacancies are essential for the occurrence of superionic conductivity.     

Intermediate molybdenum oxides involved in binary and ternary induced electrodeposition

The first stages of Co–Ni and Co–Ni–Mo deposition in sulphate–citrate medium at pH 4.0 were analysed. In both cases, the formation of non-hydrogenated nickel on the electrode before alloy deposition was detected by linear sweep voltammetry and inductively coupled plasma mass spectrometry. Co–Ni electrodeposition was anomalous since the Co/Ni ratio in the alloy was higher than the corresponding [Co(II)]/[Ni(II)] ratio in solution. The adsorption of Co(II) over the initial nickel could explain the anomalous codeposition, which persisted with the addition of molybdate to the Co–Ni bath. However, the formation of intermediate molybdenum oxides also took place. A mechanism has been proposed to describe the sequence of steps for Co–Ni–Mo electrodeposition. Under our conditions, the alloy is formed mainly from free Co²⁺ and Ni²⁺ cations, whereas molybdate is reduced firstly to molybdenum oxide from MoO₄(H₃Cit)²⁻ and, secondly, NiCit⁻ catalyses the subsequent reduction to molybdenum metal of the intermediate [MoO₂–NiCit⁻]_ads species.     

Stepwise Assembly of MII7 Clusters Revealed by Mass Spectrometry,EXAFS, and Crystallography

The square‐planar monomer NiL₂ ( Ni₁ ), L=2‐ethoxy‐6‐(N‐methyl‐iminomethyl)phenolate, reacts with M(H₂O)₆(ClO₄)₂, M=Ni or Co, to form heptanuclear disks [Co_xNi_7?x(OH)₆(L)₆](ClO₄)₂ ? 2 CH₃CN ( Co _x Ni_7?x , x=0–7) and the co‐crystal [Co_xNi_7?x(OH)₆L₆][NiL₂](ClO₄)₂ ? 2 CH₃CN ( Co _x Ni_7?x ‐Ni₁ ) under ambient conditions. It has proved possible to explore the bottom‐up assembly process of Co _x Ni_7?x and Co _x Ni_7?x ‐Ni₁ in real time. The final products have been characterized by thermogravimetric analysis, IR, elemental analysis, ICP‐MS, and single‐crystal X‐ray diffraction. Time‐dependent mass spectrometry (MS) revealed the following reaction steps: Ni₁→[M₂L₃]⁺→[M₄(OH)₂L₄]²⁺→[M₇(OH)₆L₆]²⁺. In contrast, the reaction of Ni₁ with Zn²⁺ only reaches halfway, and crystallographic evidence indicates a butterfly structure for [Zn₂Ni₂(OH)₂Cl₂] ( Zn₂Ni₂ ), an intermediate that is difficult to isolate in the above Ni‐Co series. A summation method has been used to analyze the MS of bimetallic clusters with very similar atomic masses, as is the case for Co and Ni. The results provide ample information on the distribution of Co and Ni within each cluster and their statistical distribution within selected crystals.     

溶胶-凝胶法制备NixCo1-xCoAlO4尖晶石型复合氧化物及其催化分解N2O性能

用溶胶凝胶法制备了一组Ni_xCo_1-xCoAlO₄尖晶石型复合氧化物,并采用表面润湿浸渍K₂CO₃溶液进行了K掺杂改性,用于有氧气氛下的N₂O催化分解反应.采用N₂物理吸附、X-射线衍射(XRD)、扫描电镜(SEM)、H₂-程序升温还原(H₂-TPR)等技术对催化剂进行了表征,考察了催化剂组成、母液pH值、K负载量等制备参数对其催化活性的影响.结果表明,母液pH值为3、K/(Ni+Co)物质的量比为0.1的K/Ni_0.15Co_0.85CoAlO₄催化剂具有较高的N₂O分解活性,450 ℃ N₂O可完全分解.助剂K的加入弱化了催化剂表面金属氧键,提高了催化剂的还原性、催化活性和抗水性.     

层状Li(Ni1-xCox)O2结构研究

0引言层状钴酸锂是目前锂离子电池主要正极材料,但是,随着锂离子电池的广泛使用,急需比钴酸锂价格低和来源广泛的正极材料,层状锰酸锂和层状镍酸锂受到重视。由于锰氧化物存在有J-T效应,因此,严格意义上的层状锰酸锂的制备极其困难。制备层状镍酸锂也非常困难,高温反应极易生成Li1-xNi1 xO2,具有此种结构的镍酸锂存在严重首次能量衰减和循环性能下降的缺点。采用其他元素掺杂镍酸锂克服其缺点的研究已经很多,其中钴掺杂镍酸锂由于显示了良好的效果而被认为是最有希望替代钴酸锂的锂离子电池正极材料。有关层状镍钴酸锂的研究很多,但不少的…     

Effect of epitaxial growth on the formation of the cobalt catalysts of the Fischer-Tropsch synthesis

Mixed oxides Co_xAl_yO₄ with different Al/Co ratios applied as supports for the catalysts of the Fischer-Tropsch synthesis were prepared using the solid-state chemical reaction. The Co_xAl_yO₄ supports were prepared by modifying gibbsite with various cobalt salts (acetate, nitrate, and basic carbonate). The use of basic cobalt carbonate gives the Co(20%)/Co_xAl_yO₄ catalyst, which provides an increased yield of hydrocarbons C₅₊ and a decreased methane content compared to the impregnation catalyst Co(30%)/Al₂O₃. The introduction of small amounts of rhenium additives makes it possible to enhance the yield of hydrocarbons C₅₊ (179 g m⁻³) and also to increase the selectivity with respect to the C₅–C₁₈ fraction. The introduction of basic cobalt carbonate into the support, most likely, creates favorable conditions for the epitaxial growth of the precursor of the active phase. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1856–1860, September, 2007.     

Copper(II) and nickel(II) metallopolymers derived from polyacylhydrazones

A series of polyacylhydrazones derived from condensing diacetyl with oxalic, malonic, succinic, glutaric and adipic dihydrazides was prepared, characterized and reacted with copper(II) and nickel(II) acetate to give metallopolymers of general formula [Cu₂(L)(AcO)₂(OH)(H₂O)₂] · yH₂O _n , [Cu(L)(AcO)(HO)(H₂O)] · yH₂O _n , [Ni₂(L)(AcO)₂-(HO)₂] · yH₂O _n and [Ni(L)(AcO)(HO)] · yH₂O _n , where L refers to the neutral dihydrazone unit. Magnetic susceptibility measurements in the 4.2–300 K range indicate significant antiferromagnetic coupling between the Cu^II centers in the metallopolymers, which may indicate the presence of two polymer chains crosslinked by bis--acetatocopper(II) bridges. Based on i.r., spectral and magnetic measurements, tentative structures of the Cu^II and Ni^II metallopolymers have been proposed. The dihydrazone units in these polymers are coordinated to the metal(II) via the azomethine nitrogen(s) whereas the amide group remains uncoordinated. Each Cu^II is penta-coordinated in a distorted square pyramidal environment and is neutralized by one bridged acetate and a hydroxide ion, while the fifth coordination site is occupied by a water molecule. In the nickel(II) metallopolymers the metal ions are in a tetrahedral environment and are coordinated to azomethine nitrogen, two bridged acetate oxygens and to the hydroxide ion.     

Iridium–nickel composite oxide catalysts for oxygen evolution reaction in acidic water electrolysis

A series of Ir_1–xNi_xO_2–y (0 ≤ x ≤ 0.5) composite oxides have been prepared by a simple pyrolysis method in ethanol system and used as the electrocatalysts for OER in acidic medium. The materials have been characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF) and scanning electron microscopy (SEM). The electrochemical performances of these Ir_1–xNi_xO_2–y composite catalysts are evaluated by cyclic voltammetry (CV) and steady-state measurements. The resulting oxides with the Ni content (x) less than 0.3 have a complex nature of metal Ir and rutile structure IrO₂ which is similar to the Ir oxide prepared by the same approach and possess the contracted lattice resulted from the Ni-doping. Although the addition of Ni reduces the electroactive surface areas due to the coalescence of particles, the catalytic activity of the Ir_1–xNi_xO_2–y (0 < x ≤ 0.3) catalysts is slightly higher than that of the pyrolyzed Ir oxide. Regardless of the surface area difference, the intrinsic activity first increases and then decreases with the Ni content in Ir_1–xNi_xO_2–y catalysts, and the intrinsic activity of Ir_0.7Ni_0.3O_2–y catalyst is about 1.4 times of the Ni-free Ir oxide mainly attributed to the enhancement of conductivity and a change of the binding energy as increasing amount of the incorporated Ni with respect to the pure IrO₂. The Ir_0.7Ni_0.3O_2–y catalyst shows a prospect of iridium-nickel oxide materials in reducing the demand of the expensive Ir oxide catalyst for OER in acidic water electrolysis.     

Synthesis of non-stoichiometric lithium nickel cobalt oxides and their structural and electrochemical characterization

Non-stoichiometric phases of lithium nickel cobalt oxides were synthesized by a sol–gel method using oxalic acid as a chelating agent. The structural properties have been examined using X-ray diffraction techniques. Electrochemical coin cell studies showed materials with excess lithium stoichiometry had interesting properties of improved capacity and cyclability. Of all the compositions with excess lithium stoichiometry, Li_1.1Ni_0.8Co_0.2O₂, showed better electrochemical characteristics with a first cycle discharge capacity of 182 mAh/g and a 10th cycle of 172 mAh/g than the ideal stoichiometry LiNi_0.8Co_0.2O₂. The structural and electrochemical properties of Li_xNi_0.8Co_0.2O₂ with x=1.00, 1.05, 1.10 and 1.15 are discussed in detail.