Temperature sensitive poly[N-isopropylacrylamide-co-(acryloyl beta-cyclodextrin)] for improved drug release

The model drugs ibuprofen (IBU) and tegafur (T-Fu) were loaded into poly[N-isopropylacrylamide-co-(acryloyl beta-cyclodextrin)] [P(NIPA-co-A-CD)] and PNIPA hydrogels by immersing dried gels in IBU or T-Fu alcohol solutions until they reached equilibrium. Drug release studies were carried out in water at 25 degrees C. In contrast to the release time of conventional PNIPA hydrogel, that of IBU from the beta-CD incorporated hydrogel was significantly prolonged and the drug loading was also greatly increased, which may be the result of the formation of inclusion complexes between CD and ibuprofen. However, another hydrophilic drug, tegafur, did not display these properties because it could not form a complex with the CD groups. [diagram in text].     

Hyperbranched Polyamidoamines Containing β‐Cyclodextrin for Controlled Release of Chlorambucil

This work is focused on the controlled drug release behavior of hyperbranched HPMA in the presence of β‐CD. Hence, three HPMA‐β‐CDs and a pure HPMA were synthesized by Michael addition polymerization. As a model drug, CLB (an anti‐cancer drug) was loaded into them via a solution method for in vitro release studies. The DSC results indicate that the CLB/polymer interactions are at the molecular level. Loading CLB into these polymers results in an evident increase in their glass transition temperatures, and ΔT_g depends on the β‐CD content. The controlled‐release experiments show that the presence of β‐CD can appropriately slow the release of CLB from HPMA‐β‐CDs and adjust the ratio of CLB released in total drug loading.

     

Preparation and properties of poly(N‐isopropylacrylamide)/poly(N‐isopropylacrylamide) interpenetrating polymer networks for drug delivery

A novel poly(N‐isopropylacrylamide) (PNIPA)/PNIPA interpenetrating polymer network (IPN) was synthesized and characterized. In comparison with conventional PNIPA hydrogels, the shrinking rate of the IPN hydrogel increased when gels, swollen at 20 °C, were immersed in 50 °C water. The phase‐transition temperature of the IPN gel remained unchangeable because of the same chemical constituent in the PNIPA gel. The reswelling kinetics were slower than those of the PNIPA hydrogel because of the higher crosslinking density of the IPN hydrogel. The IPN hydrogel had better mechanical strength because of its higher crosslinking density and polymer volume fraction. The release behavior of 5‐fluorouracil (5‐Fu) from the IPN hydrogel showed that, at a lower temperature, the release of 5‐Fu was controlled by the diffusion of water molecules in the gel network. At a higher temperature, 5‐Fu inside the gel could not diffuse into the medium after a burst release caused by the release of the drug on the surface of the gel. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1249–1254, 2004     

Macroporous Poly(N-isopropylacrylamide) hydrogels with adjustable size "cut-off" for the efficient and reversible immobilization of biomacromolecules

Poly(N-isopropylacrylamide) (PNIPA) hydrogels with varied degree of crosslinking (DC) were synthesized by using poly(ethylene glycol) (PEG) as an additive. A phase separated ("macroporous") morphology was formed when using PEG contents of > or = 20 wt.-%. Temperature-dependent degrees of swelling had been measured, and average mesh sizes of the swollen polymer network had been calculated. The loading of the hydrogels with labelled dextrans with various molar masses and bovine serum albumin (BSA)-via swelling of the shrunken gel in a cold solution-and their subsequent unloading-via immersion in hot water-were studied in detail. The loading efficiencies were close to zero for PNIPA prepared at PEG contents of < or = 10 wt.-%, and they increased sharply to about 100% for PNIPA prepared with PEG contents of > or = 20 wt.-%. A complete unloading was achieved as well. For macroporous PNIPA prepared at 40 wt.-% PEG content, the loading efficiency was a function of the DC, and the "cut-off" observed as a function of dextran or protein size correlated with the mesh size of the hydrogel. The function of these "smart" hydrogels can be explained by the temperature-induced "pumping" of the solution into the gel bulk via the permanent pores, along with an uptake into the adjacent hydrogel network. Those materials could be used as matrices for the efficient and reversible immobilization of (bio)macromolecules.     

Thermosensitive polylactide‐glycolide delivery systems for treatment of narcotic addictions

Environmental switches may be fabricated for the controlled release of pharmaceutical drug using a thermally responsive polymer with the intrinsic chemical and physical nature of stimuli‐sensitive smart materials. Particularly, much attention has been paid to the biomedical applications of poly(N‐isopropyl acrylamide) (PNIPAAm) because of its unique reversible transition at a specific lower critical solution temperature (LCST).Thermally sensitive block copolymers, poly(N‐isopropyl acrylamide‐b‐poly(L ‐lactide‐co‐glycolide) (PNIPAAm‐b‐PLGA), and polyethylene glycol‐poly (lactide‐co‐glycolide) (PEG‐PLGA) triblock copolymers with different compositions and length of PLGA block were synthesized via ring‐opening polymerization of lactide and glycolide in the presence of OH‐terminated PNIPAAm or PEG. The composition and structure of the polymer were determined by NMR and FTIR. The effect of important factors, such as ionic strength, pH, and polymer concentration on the phase transition behavior of temperature‐sensitive polymers, were investigated by cloud point measurements. The resulting thermosensitive polymers were used for the entrapment of a narcotic antagonist drug, naltrexone, as the model drug. The loading efficiency and drug release behavior of naltrexone‐loaded hydrogels were investigated. The naltrexone loaded thermosensitive polymers were able to sustain the release of naltrexone for different periods of time, depending on the polymer composition, and concentration. In vitro release studies showed that these thermosensitive polymers are able to deliver naltrexone in biologically active forms at a controlled rate for 3–8 weeks. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

Preparation and separation function of N‐isopropylacrylamide copolymer hydrogels

In this paper, N‐isopropylacrylamide (NIPA) was synthesized by acrylonitrile and isopropanol. Poly(N‐isopropylacrylamide) (PNIPA) was prepared by a chemical method. The dependence of its swelling behavior on temperature was studied. Results showed that PNIPA hydrogel was a temperature‐sensitive gel. Its LCST (lower critical solution temperature) was about 32 °C, and its swelling ratio (at 20 °C) was about 17–18. Sodium acrylate (SA) and sodium methylacrylate (SMA) were copolymerized with NIPA respectively. Equilibrium swelling ratios of the copolymer hydrogels at lower temperature were two to three times that of PNIPA. The LCST of the copolymer hydrogels could be controlled between 32 and 45 °C by adjusting the content of SA or SMA. Kinetics of P(NIPA‐co‐SA) hydrogels, whether swelling or shrinking processes, were in good agreement with apparent second order kinetic equations. Several experiments were designed to separate aqueous bovine serum albumin solution using the hydrogels prepared above. The separation efficiency was about 80%. Copyright © 2000 John Wiley & Sons, Ltd.     

Designing of pH-responsive ketorolac tromethamine loaded hydrogels of alginic acid: Characterization,in-vitro and in-vivo evaluation

pH-responsive hydrogels based on alginic acid grafted with acrylic acid and ethylene glycol dimethylacrylate in the presence of ammonium persulfate were developed for controlled delivery of Ketorolac tromethamine. The alginic acid based hydrogels were prepared by free radical polymerization technique. Increase in gel fraction was observed with the increase in alginic acid, acrylic acid, and ethylene glycol dimethylacrylate content. The dynamic swelling and drug release studies were conducted at two different pH values (pH 1.2 and 7.4). Maximum swelling and drug release were observed at pH 7.4. The characterization of prepared hydrogels was carried out by using Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, powder x-ray diffraction, and scanning electron microscopy. Similarly, in-vivo study was performed on rabbits and greater plasma drug concentration was achieved by fabricated hydrogels as compared to drug solution and commercial product Keten. Conclusively, the fabricated hydrogels can be considered as a potential candidate for controlled delivery of Ketorolac tromethamine.     

A novel sodium carboxymethylcellulose/poly(N‐isopropylacrylamide)/Clay semi‐IPN nanocomposite hydrogel with improved response rate and mechanical properties

A novel semi‐IPN nanocomposite hydrogel (CMC/PNIPA/Clay hydrogel) based on linear sodium carboxymethylcellulose (CMC) and poly(N‐isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was prepared. The structure and morphology of these hydrogels were investigated and their swelling and deswelling kinetics were studied in detail. TEM images showed that the clay was substantially exfoliated to form nano‐dimension platelets dispersed homogeneously in the hydrogels and acted as a multifunctional crosslinker. The CMC/PNIPA/Clay hydrogels swell faster than the corresponding PNIPA/Clay hydrogels at pH 7.4, whereas they swell slower than the PNIPA/Clay hydrogels at pH 1.2. The CMC/PNIPA/Clay nanocomposite hydrogels showed much higher deswelling rates, which was ascribed to more passway formed in these hydrogels for water to diffuse in and out. The deswelling process of the hydrogels could be approximately described by the first‐order kinetic equation and the deswelling rate decreased with increasing clay content. The mechanical properties of the CMC/PNIPA/Clay nanocomposite hydrogels were analyzed based on the theory of rubber elasticity. It was found that with increasing clay content, the effective crosslink chain density, v_e, increased whereas the molecular weight of the chains between crosslinks M_c decreased. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1546–1555, 2008     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

pH-enzyme di-dependent chronotherapeutic drug delivery system of theophylline for nocturnal asthma

The purpose of this research work was to develop and evaluate a chronotherapeutic based colon-targeted drug delivery system of theophylline (THEO) exploiting pH-enzyme sensitive property for the prevention of episodic attack of asthma in early morning. Guar gum microspheres of theophylline were prepared by emulsification technique. Coating of microspheres was performed using solvent evaporation method with pH sensitive Eudragit(?) polymers. The particle size and surface morphology, entrapment efficiency and degree of swelling of microspheres were examined. The in vitro drug release studies were performed in pH progression medium and also in the presence of 2% rat caecal content. Theophylline was efficiently microencapsulated in guar gum microspheres at different polymer concentrations (1-4%). Fourier transform infrared (FT-IR)-spectroscopy confirmed the intermolecular interactions between guar gum and glutaraldehyde. Coating of guar gum microspheres by Eudragit led to decelerate the in vitro drug release of THEO. Moreover in vitro drug release studies also performed with 2% rat caecal content showed marked increment in drug release. The controlled release of THEO after a lag time was achieved with developed formulation for chronotherapeutic delivery. The pH dependent solubility behavior of Eudragit and gelling properties of guar gum are found to be responsible for delaying the release.     

Thermoresponsive poly(N-isopropylacrylamide) nanogels/poly(acrylamide) nanostructured hydrogels

Here we report the preparation and characterization of nanostructured thermo-responsive poly(acrylamide) (PAM)-based hydrogels. The addition of slightly crosslinked poly(N-isopropylacrylamide) (PNIPA) nanogels to AM reactive aqueous solution produces nanostructured hydrogels that exhibit a volume phase transition temperature (T_VPT). Their swelling kinetics, T_VPT's and mechanical properties at the equilibrium-swollen state (H_eq) are investigated as a function of the concentration of PNIPA nanogels in the nanostructured hydrogels. Nanostructured hydrogels with PNIPA nanogels/AM mass ratios of 20/80 and above exhibit higher H_eq and longer time to reach the equilibrium swelling than those of the conventional PAM hydrogels. However, the PNIPA nanogels possess thermo-responsive character missing in conventional PAM hydrogels. The T_VPT of nanostructured hydrogels depends on PNIPA nanogel content but their elastic and Young moduli are larger than those of conventional hydrogels at similar swelling ratios. Swelling kinetics, T_VPT, and mechanical properties are explained in terms of the controlled in-homogeneities introduced by the PNIPA nanogels during the polymerization.     

Temperature-sensitive polyamidoamine dendrimer/poly(N-isopropylacrylamide) hydrogels with improved responsive properties

Novel temperature-sensitive poly(N-isopropylacrylamide)/amine-terminated polyamidoamine dendrimer G6-NH2 hydrogels with fast responsive properties were synthesized by forming semi-interpenetrating polymeric networks. In contrast to the conventional PNIPA hydrogel, these new gels showed rapid shrinking rate at the temperature above lower critical solution temperature (LCST), and exhibited higher equilibrium swelling ratio at room temperature. All these properties might be attributed to the incorporation of polyamidoamine dendrimer G6-NH2, which forms water-releasing channels and increases the hydrophilicity of PNIPA network. The novel hydrogels have potential applications in drug and gene delivery.     

Mathematical modeling and sustained release property of a 5-fluorouracil imprinted vehicle

In the present research, a type of imprinted hydrogels, in which 5-fluorouracil is complexed non-covalently to the monomers and cross-linked into the hydrogel matrix, is synthesized in order to evaluate the possibility of their applications in sustaining the release of 5-fluorouracil due to the drug’s heightened interactions with the imprinted binding sites. Because of the hydrophility, hydrogels can absorb large amounts of water. As a result, drug release mechanisms are different from hydrophobic polymers. Mathematical model has been established to predict the drug release from the hydrogel matrix as a function of time. The drug release mechanism when immersed in release medium is discussed based on mathematical analysis. Swelling studies are performed and the capability of the hydrogels to reload 5-fluorouracil in aqueous solutions is evaluated. In vitro release studies after reloading are conducted. Mathematical analysis suggest that drug release kinetics from the hydrogels fit Fickian mechanism, further evaluation of the fitness for different hydrogel types reveal that the conformation of binding sites can play a very important role in deciding the kind of drug release mechanism. Experiments reveal that all hydrogels show swelling property. The imprinted hydrogels bind much more 5-fluorouracil than non-imprinted ones, and they sustain 5-fluorouracil release better than non-imprinted hydrogels. This research indicates that the imprinted hydrogels would be a potential promising device for drug delivery.     

Hybrid cross‐linked hydrogels as a technology platform for in vitro release of cephradine

Hydrogel‐based drug delivery systems can leverage therapeutically favorable upshots of drug release and found clinical uses. Hydrogels offer temporal and spatial control over the release of different therapeutic agents. Because of their tailor made controllable degradability, physical properties, and ability to prevent the labile drugs from degradation, hydrogels provide platform on which diverse physicochemical interactions with entrapped drugs cause to control drug release. Herein, we report the fabrication of novel vinyltrimethoxy silane (VTMS) cross‐linked chitosan/polyvinyl pyrrolidone hydrogels. Swelling in distilled water in conjunction with different buffer and electrolyte solutions was performed to assess the swellability of hydrogels. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD) analysis were further conducted to investigate the possible interactions between components, thermal stability, and crystallinity of as‐prepared hybrid hydrogels, respectively. In vitro time‐dependent biodegradability, antimicrobial study, and cytotoxicity were also carried out to evaluate their extensive biocompatibility and cytotoxic behavior. More interestingly, in vitro drug release study allowed for the controlled release of cephradine. Therefore, this facile strategy developed the novel biocompatible and biodegradable hybrid hydrogels, which could significantly expand the scope of these hydrogels in other biomedical applications like scaffolds, skin regeneration, tissue engineering, etc.     

A pH-Sensitive Hydrogel with Hydrophobic Association for Controlled Release of Poorly Water-Soluble Drugs

A novel pH-sensitive hydrogel has been developed by UV induced radical polymerization of acrylic acid (AA) and amphiphilic macromonomer polyethylene glycol monolaurylether monoacrylate (PEGLA) with crosslinker ethylene glycol dimethacrylate for controlled release of acyclovir, a poor water-soluble model drug. The swelling behavior was investigated in the buffer of different pH at I = 0.1 M, as well as in the ethanol/water mixture. The hydrophobic association formed by the hydrocarbon chains in PEGLA was found to dominate the swelling properties of the hydrogels with subordinate pH sensitivity due to the ionization of the AA segments. Therefore, the drug loading of acyclovir has been improved and the release rate of acyclovir was slowed down with increasing the PEGLA content in the hydrogels. By fitting the release data with Weibull equation, the acyclovir release kinetics was changed from the Fickian diffusion to an anomalous diffusion when the PEGLA content in the hydrogels was beyond 20 mol%.     

Frontal polymerization as a new method for developing drug controlled release systems (DCRS) based on polyacrylamide

Stimuli-responsive polymers are macromolecular materials that undergo changes in response to small external stimuli in the environmental conditions. Among stimuli-responsive hydrogels are several polyacrylamides. Frontal polymerization is a fast, easy and inexpensive polymerization technique used for the synthesis of macromolecules.Aim of this work was the evaluation of the Frontal polymerization technique as new method for the preparation of controlled release dosage forms in which drug loading and polymer preparation occur together, as well as the possibility of obtaining more dosage units by a unique preparation. Hydrogels based on polyacrylamide containing diclofenac sodium salt were prepared using the Frontal polymerization and compared with similar systems obtained by the classic batch method. Polymers characterized by three different degree of cross-linking were prepared. The stability of the drug during the sample preparation was evaluated by IR analysis. The obtained samples were characterized in terms of drug content, morphology, in vitro drug release and swelling properties. Samples were studied also divided into disks. The results show that hydrogels based on polyacrylamide can be prepared by Frontal polymerization; these samples show similar properties to those obtained by batch polymerization. The drug is stable in the polymerization reaction conditions. Samples characterized by the lowest degree of cross-linking show drug loading values always higher than samples with the highest one regardless of the preparation method employed. The swelling ratio decreases as the degree of cross-linking increases. Loaded samples swell more than drug free ones. From a single preparation of hydrogel, three disks showing same drug content and in vitro release behaviour can be obtained and thus they can be used as three single dosage units.     

Stimuli-responsive nanocomposite gels

A new class of polymer hydrogels, nanocomposite hydrogels (NC gels), consisting of a unique organic (polymer)/inorganic (clay) network structure, was synthesized by in situ free-radical polymerization in the presence of exfoliated clay nanoparticles in an aqueous system. The resulting NC gels overcame most of the disadvantages associated with chemically cross-linked hydrogels, such as mechanical fragility, structural heterogeneity, and slow de-swelling rate. By using thermo-sensitive poly(N-isopropylacrylamide) (PNIPA) as a constituent polymer, NC gels with remarkable mechanical, optical, and swelling properties as well as thermo-sensitivity were obtained. The various properties of NC gels, such as transparency, gel volume, cell culturing, and surface friction changed significantly in response to the temperature and surrounding conditions. All the excellent properties and new stimuli-responsive characteristics of NC gels are attributed to the unique PNIPA/clay network structure. The thermo-sensitivities and the transition temperature can largely be controlled by varying the clay content and by the addition of solutes.     

Poly(acrylamidoglycolic acid) nanocomposite hydrogels reinforced with cellulose nanocrystals for pH-sensitive controlled release of diclofenac sodium

In this study, a non-cytotoxic and pH-sensitive poly(acrylamidoglycolic acid) based nanocomposite (PAGA-NC) hydrogels reinforced with cellulose nanocrystals (CNCs) was synthesized using redox free radical polymerization. The successful formation and crystalline behaviour of PAGA-NC hydrogels was verified by fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) analyses. The results showed that morphological, rheological and mechanical properties of the PAGA-NC hydrogels were strongly influenced by the CNCs content. Moreover, swelling properties were investigated, and the results suggested that they behaved as pH sensitive manner. The in vitro MTT assay showed that the PAGA-NC hydrogels are cytocompatibile to NIH-3T3 fibroblast cells. In addition, diclofenac sodium (DCF) model drug was successfully encapsulated into these PAGA-NC hydrogels via equilibrium swelling method. The in vitro release of DCF from PAGA-NC hydrogels was retained at pH 1.2 and maximum release was observed at 7.4, revealing as potential candidates for controlled release carriers for oral drug delivery applications.     

Reducible polyethylenimine hydrogels with disulfide crosslinkers prepared by michael addition chemistry as drug delivery carriers: Synthesis,properties, and in vitro release

Degradable hydrogels crosslinked with disulfide bonds were prepared by Michael addition between amine groups of branched polyethylenimine and carbon–carbon double bonds of N,N′‐bis(acryloyl)cystamine. The influences of the chemical composition of the resulted hydrogels on their properties were examined in terms of morphology, surface area, swelling kinetics, and degradation. The hydrogels were uniformly crosslinked and degraded into water‐soluble polymers in the presence of the reducing agent of dithiothreitol, which improved the control over the release of encapsulated drug. The degradation of hydrogels can trigger the release of encapsulated molecules, as well as facilitate the removal of empty vehicles. Results obtained from in vitro drug release suggested that the disulfide crosslinked hydrogels exhibited an accelerated release of encapsulated drug in dithiothreitol‐containing PBS buffer solution. Moreover, the drug release rate decreased gradually with increasing crosslinking density. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4074–4082, 2009