Synthesis and characterization of poly(vinyl amine)‐based amphiphilic comb‐like dextran glycopolymers by a two‐step method

Poly(vinyl amine) (PVAm)‐based amphiphilic glycopolymers were synthesized by a two‐step method, that is dextran molecules (Dex, M_w = 1500) were attached to the PVAm backbone by reacting amine groups with dextran lactone, and then, hexanoyl groups (Hex) were attached by reacting the PVAm free amine groups with N‐(hexanoyloxy)succinimide. By adjustment of the feed ratios of Dex/Hex, amphiphilic comb‐like glycopolymers with various hydrophilic and hydrophobic balances were prepared, and their structures were characterized by ¹H NMR. Surface activity of the amphiphilic glycopolymers at the air/water interface was demonstrated by reduction in water surface tension. Adsorption of the amphiphilic glycopolymers at the solid/water interface was examined on octadecyltrichlorosilane (OTS)‐coated coverslips by water contact angle measurements. The results show that the amphiphilic glycopolymers need about 20 mol % of dextran attachment to make an effective hydrophilic coating. In comparison with the one‐step reaction by addition of dextran lactone and alkyl succinimide simultaneously, the two‐step approach can attach Dex on PVAm as high as possible in the first step, and offers quantitative advantages in controlling the ratio of hydrophilic and hydrophobic chains along the PVAm backbone, resulting in increased water solubility for the final amphiphilic glycopolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 192–199, 2006     

Fluorocarbon Surfactant Polymers: Effect of Perfluorocarbon Branch Density on Surface Active Properties

We describe a series of fluorocarbon surfactant polymers designed for modifying fluorocarbon surfaces such as poly(tetrafluoroethylene). Novel fluorocarbon surfactant polymers poly(N-vinyldextranaldonamide-co-N-vinylperfluoroundecanamide), in which hydrophilic dextran oligosaccharides and hydrophobic perfluoroundecanoyl groups were incorporated sequentially onto a poly(vinylamine) backbone, were synthesized and characterized by FT-IR, NMR, and XPS spectroscopy. By adjusting the feed ratio of dextran to fluorocarbon branches, surfactant polymers with different hydrophilic/hydrophobic balances were prepared. The surface activity of the surfactants at the air/water interface was demonstrated by significant reductions in water surface tension. Surfactant adsorption and adhesion at the solid PTFE/aqueous interface were examined under well-defined dynamic flow conditions, using a rotating disk system. The surface activity at the air/water interface and adhesion stability on PTFE under an applied shear stress both increase with increasing density of fluorocarbon branches on the polymer backbone. The results show that stable surfactant adhesion on PTFE can be achieved by adjusting the hydrophilic dextran to hydrophobic fluorocarbon branch ratio.     

Comblike poly(ethylene oxide)/hydrophobic C6 branched chitosan surfactant polymers as anti-infection surface modifying agents

A series of structurally well-defined poly(ethylene oxide)/hydrophobic C₆ branched chitosan surfactant polymers that undergo surface induced self assembly on hydrophobic biomaterial surfaces were synthesized and characterized. The surfactant polymers consist of low molecular weight (M_w) chitosan backbone with hydrophilic poly(ethylene oxide) (PEO) and hydrophobic hexyl pendant groups. Chitosan was depolymerized by nitrous acid deaminative cleavage. Hexanal and aldehyde-terminated PEO chains were simultaneously attached to low M_w chitosan hydrochloride via reductive amination. The surfactant polymers were prepared with various ratios of the two side chains. The molecular composition of the surfactant polymers was determined by FT-IR and ¹H NMR. Surface active properties at the air–water interface were determined by Langmuir film balance measurements. The surfactant polymers with PEO/hexyl ratios of 1:3.0 and 1:14.4 were used as surface modifying agents to investigate their anti-infection properties. E. coli adhesion on Silastic^® surface was decreased significantly by the surfactant polymer with PEO/hexyl 1:3.0. Surface growth of adherent E. coli was effectively suppressed by both tested surfactant polymers.     

Microcalorimetric evidence of hydrophobic interactions between hydrophobically modified cationic polysaccharides and surfactants of the same charge

We synthesized and characterized a series of new polymers-hydrophobically modified cationic polysaccharides-based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. These polymers are good candidates for studying the hydrophobic effect on polymer/surfactant association. In previous papers we reported their interactions with oppositely charged surfactants. For further insight into the relative importance of the hydrophobic interaction in the association process now we studied the thermodynamics of the interaction of these hydrophobically modified polymers with surfactants of the same charge (DMRX/CnTAC) by isothermal titration calorimetry (ITC). In order to try to discriminate the solution behavior of these polymer/surfactant systems, we analyzed separately the interaction of unmodified dextran with ionic surfactants and the interactions between the corresponding cationic surfactants. The interaction enthalpies for DMRX/CnTAC systems were derived from a proposed thermodynamic model with equations that describe the polymer-surfactant interactions. The thermodynamic parameters for the DMRX/CnTAC aggregation process as well as surfactant micellization in the presence of the polymer were also calculated. From all the results we were able to ascertain the effect on the interactions of changing the alkyl chain length of the polyelectrolyte pendant groups or the surfactant. The importance of the polymer aggregation state on the mechanism of interaction was also addressed.     

Thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution

Microcalorimetric techniques, combined with turbidity measurements, were used to study the thermodynamics of self-assembling of hydrophobically modified cationic polysaccharides and their mixtures with oppositely charged surfactants in aqueous solution. The studied polyelectrolytes were a series of polymers based on dextran having pendant N-(2-hydroxypropyl)-N,N-dimethyl-N-alkylammonium chloride groups randomly distributed along the polymer backbone. The parameters for their micellization process are evaluated from the results of the observed dilution enthalpy curves and compared with those of the related cationic surfactants (DTAC and CTAC). The microcalorimetric results for the mixed systems (polyelectrolytes with oppositely charged surfactants) are used along with turbidity measurements to characterize systematically the thermodynamics of their interaction. The phase behavior is described and the interaction enthalpies are derived from the differences between the observed enthalpy curves with and without polyelectrolyte. Therefore, we discuss in detail the effect of changing the alkyl chain length of polyelectrolyte pendant groups, the molecular weight of the dextran backbone, and the temperature of the measurements on the interactions between polyelectrolyte and surfactant.     

Chitosan based surfactant polymers designed to improve blood compatibility on biomaterials

We developed chitosan based surfactant polymers that could be used to modify the surface of existing biomaterials in order to improve their blood compatibility. These polymers consist of a chitosan backbone, PEG side chains to repel non-specific protein adsorption, and hexanal side chains to facilitate adsorption and proper orientation onto a hydrophobic substrate via hydrophobic interactions. Since chitosan is a polycationic polymer, and it is thrombogenic, the surface charge was altered to determine the role of this charge in the hemocompatibility of chitosan. Charge had a notable effect on platelet adhesion. The platelet adhesion was greatest on the positively charged surface, and decreased by almost 50% with the neutralization of this charge. A chitosan surface containing the negatively charged SO(3)(-) exhibited the fewest number of adherent platelets of all surfaces tested. Coagulation activation was not altered by the neutralization of the positive charge, but a marked increase of approximately 5-6 min in the plasma recalcification time (PRT) was displayed with the addition of the negatively charged species. Polyethylene (PE) surfaces were modified with the chitosan surfactant resulting in a significant improvement in blood compatibility, which correlated to the increasing PEG content within the polymer. Adsorption of the chitosan surfactants onto PE resulted in approximately an 85-96% decrease in the number of adherent platelets. The surfactant polymers also reduced surface induced coagulation activation, which was indicated by the PEG density dependent increase in PRTs. These results indicate that surface modification with our chitosan based surfactant polymers successfully improves blood compatibility. Moreover, the inclusion of either negatively charged SO(3)(-) groups or a high density of large water-soluble PEG side chains produces a surface that may be suitable for cardiovascular applications.     

Surface activity and emulsification properties of hydrophobically modified dextrans

Neutral polymeric surfactants were synthesized by covalent attachment of hydrophobic groups (aromatic rings) onto a polysaccharide backbone (dextran). By changing the conditions of the modification reaction, the number of grafted hydrophobic groups per 100 glucopyranose units (substitution ratio) was varied between 7 and 22. In aqueous solution, these polymers behaved like classical associative polymers as demonstrated by viscometric measurements. The associative behavior was more pronounced when the substitution ratio increased. The surface-active properties of the modified dextrans were evidenced by surface tension (air/water) and interfacial tension (dodecane/water) measurements. In each case the surface or interfacial tension leveled down above a critical polymer concentration, which was attributed to the formation of a dense polymer layer at the liquid-air or liquid-liquid interface. Dodecane-in-water emulsions were prepared using the polymeric surfactants as stabilizers, with oil volume fractions ranging between 5 and 20%. The oil droplet size (measured by dynamic light scattering) was correlated to the amount of polymer in the aqueous phase and to the volume of emulsified oil. The thickness of the adsorbed polymer layer was estimated thanks to zeta potential measurements coupled with size measurements. This thickness increased with the amount of polymer available for adsorption at the interface. The dextran-based surfactants were also applied to emulsion polymerization of styrene and stable polystyrene particles were obtained with a permanent adsorbed dextran layer at their surface. The comparison with the use of an unmodified dextran indicated that the polymeric surfactants were densely packed at the surface of the particles. The colloidal stability of the suspensions of polystyrene particles as well as their protection against protein adsorption (bovine serum albumin, BSA, used as a test protein) were also examined.     

Controlled synthesis of stable poly(vinyl formamide-co-vinyl amine)/silica hybrid particles by interfacial post-cross-linking reactions

 The chemical synthesis and the physicochemical properties of stable poly(vinyl formamide-co-vinyl amine)/silica hybrid particles are presented. Copolymers of poly(vinyl formamide) (PVFA) and poly(vinyl amine) (PVAm) and their protonated forms were adsorbed onto silica from aqueous solutions. The influences of the pH strength and the ion concentration of the aqueous solution as well as the copolymer composition (degree of hydrolyzation of PVFA), and the molecular mass on the adsorption process were investigated by electrokinetic measurements, potentiometric titration, and quantitative elemental analyses. Silica surface-charge neutralization is achieved at a pH strength above 10 for highly hydrolyzed (95%) PVFA polymers. Decreasing the amino content in the PVAm chain shifts successively both the point of zero charge and the isoelectric point to lower pH values. PVFA-co-PVAm layers onto silica are adsorbed weakly. To fix these layers irreversibly, cross-linking reactions with (4,4′-diisocyanate)diphenyl methane were carried out on the surface of solid PVFA-co-PVAm/silica hybrid particles suspended in acetone. The cross-linking reaction, which is connected with the conversion of amino groups, is also a tool to control the surface charge of the PVFA-co-PVAm/silica hybrids. X-ray photoelectron spectroscopy and solid-state ¹³C cross-polarization magic-angle spinning NMR spectroscopy were used to obtain information on the number of and the structure of the functionalized polyelectrolyte layers on silica. The success of cross-linking was also shown by the results of these spectroscopic methods. Received: 28 June 1999 /Accepted: 27 August 1999     

Photophysical investigations of interpolymer interactions in solutions of a pyrene substituted poly(acrylic acid), poly(vinyl amine), poly(1-aminoacrylic acid), and poly(1-acetylaminoacrylic acid)

Photophysical properties of the pyrene chromophore covalently bound to poly(acrylic acid) were used to investigate the interactions of a pyrene substituted poly(acrylic acid) (1) with poly(vinyl amine hydrochloride) (PVAm), poly(1-aminoacrylic acid) (PDA), and poly(1-acetylaminoacrylic acid) (PADA) in aqueous solutions. A number of photophysical parameters were obtained from fluorescence emission and excitation spectra, the deconvolution of decay curves for pyrene monomer, and excited state complex fluorescence and the quenching of pyrene monomer fluorescence by nitromethane in polymer solutions. These photophysical parameters were considered to reflect the inter- and intrapolymer interactions in solutions of 1 , PVAm, PDA, and PADA. The formation of interpolymer complexes between 1 and PVAm was noticed at low (< 4) as well as high (> 8) values, whereas PDA and 1 formed interpolymer complexes at low pH only. No interpolymer complex formation was detected in solutions of 1 and PADA under low or high pH conditions. The structures of interpolymer complexes formed between 1 and PVAm under low and high pH conditions were found to be determined by the conformation of 1 . There were significant differences in the interpolymer interactions of 1 and PDA in comparison to those of 1 and PVAm; in particular, the fluorescence from the excited state complex was enhanced in solutions of 1 and PVAm but quenched in solutions of 1 and PDA. The investigations of terpolymer solutions of 1 , PVAm, and PADA indicated that the nature of interpolymer complexes formed in terpolymer solutions was determined by Coulombic interactions of the amino and carboxylic group containing polymers.     

Synthesis of polymerically bound catecholcarboxamide chelators for iron (III)

Tris(catecholcarboxamide) ligands were covalently linked to poly(vinyl amine—vinyl sulfonate sodium salt), and the iron binding capacity of the resultant polymers was found to exceed that of transferrin.     

Wettability of polymeric solids by ternary mixtures composed of hydrocarbon and fluorocarbon nonionic surfactants

Contact angle (θ) measurements on poly(tetrafluoroethylene) (PTFE) and polymethyl methacrylate (PMMA) surface were carried out for the systems containing ternary mixtures of surfactants composed of: p-(1,1,3,3-tetramethylbutyl)phenoxypoly(ethylene glycols), Triton X-100 (TX100), Triton X-165 (TX165) and Triton X-114 (TX114), and fluorocarbon surfactants, Zonyl FSN100 (FSN100) and Zonyl FSO100 (FSO100). The aqueous solutions of ternary surfactant mixtures were prepared by adding TX114, FSN100 or FSO100 to binary mixtures of TX100+TX165, where the synergistic effect in the reduction of the surface tension of water (γ(LV)) was determined. From the obtained contact angle values, the relationships between cosθ, the adhesion tension and surface tension of solutions, cosθ and the reciprocal of the surface tension were determined. On the basis of these relationships, the correlation between the critical surface tension of PTFE and PMMA wetting and the surface tension of these polymers as well as the work of adhesion of aqueous solutions of ternary surfactant mixtures to PTFE and PMMA surface were discussed. The critical surface tension of PTFE and PMMA wetting, γ(C), determined from the contact angle measurements of aqueous solutions of surfactants including FSN100 or FSO100 was also discussed in the light of the surface tension changes of PTFE and PMMA under the influence of film formation by fluorocarbon surfactants on the surface of these polymers. The γ(C) values of the studied polymeric solids were found to be different for the mixtures composed of hydrocarbon surfactants in comparison with those of hydrocarbon and fluorocarbon surfactants. In the solutions containing fluorocarbon surfactants, the γ(C) values were different taking into account the contact angle in the range of FSN100 and FSO100 concentration corresponding to their unsaturated monolayer at water-air interface or to that saturated.     

Preparation of Ultrafine Water-soluble Polymers Nanofiber Mats via Electrospinning

A series of water-soluble polymers such as poly(ethylene oxide)(PEO),polyacrylamide(PAM) and poly(vinyl pyrrilidone)(PVP) was successfully prepared via the electrospinning of their aqueous solutions without the use of a surfactant.The effects of solution properties on the electrospinning of PEO,PAM and PVP solutions were investigated.The viscosity of the solution,charge density carried by the jet,and the surface tension of the solution are the key factors that influence the morphology and diameter size of t...     

Preparation of surfactant anion-selective electrodes with different selectivity coefficients and a trial to determine each component in binary surfactant mixtures

Functional membrane electrodes with different charge densities were prepared from partly cationic poly(vinyl chloride) (PVC) and a plasticizer. The modified PVC polymers were synthesized by the co-polymerization of vinyl chloride (VC) and 3-acrylamido-N,N-dimethylpropylamine (ADPA) in different ratios followed by alkylation of the amine segments with methyl iodide. These membrane electrodes showed a nearly Nernstian response to sodium dodecyl sulfate (SDS) below the critical micelle concentration (CMC). In mixtures of SDS and other surfactants, the electrode response was examined and the selectivity coefficient K for the added surfactant was determined. The charge density of the functional membrane altered K; the greater the charge density of the membrane, the greater the value of K. Two membrane electrodes with different K were used to determine the concentration of each component in a binary surfactant mixture. They determined the concentration of the primary surfactant with reasonable accuracy, but the error in determining the concentration of the secondary surfactant was great. The error analysis indicated that a large difference in K for two electrodes is necessary to determine the concentrations of both components in binary surfactant mixtures with reasonable accuracy.     

Interaction of gums (guar, carboxymethylhydroxypropyl guar, diutan, and xanthan) with surfactants (DTAB, CTAB, and TX-100) in aqueous medium

The interaction of surfactants dodecyltrimethylammonium bromide (DTAB), cetyltrimethylammonium bromide (CTAB), and p-tert-octylphenoxypolyoxyethylene (9.5) ether (TX-100) with guar (Gr), carboxymethylhydroxypropyl guar (CMHPG), diutan (Dn), and xanthan (Xn) gums has been studied employing conductometry, tensiometry, microcalorimetry, viscometry, and atomic force microscopy (AFM) techniques. Both weak and strong interactions were observed. CTAB interacted stronger than DTAB with the gums. The surfactant-gum interaction process was enhanced by the presence of borate ions in the solution; the borate ion itself also manifested interaction with the surfactants comparable with that of water-soluble polymers polyvinyl alcohol, polyoxyethylene, and so forth. Viscometric results supported configurational changes of the gum molecules by interaction with surfactants. The geometry of the pure gums and their CTAB interacted products in the dried states was ascertained from AFM measurements; spherical and prolate shapes were observed for pure gums, and distorted states were observed for their surfactant complexed species. Detailed topological features of these entities were ascertained.     

EFFECT OF SURFACTANTS ON FILM FORMATION OF POLY (VINYL ACETATE) AND POLY (VINYL ACETATE-BUTYL ACRYLATE) LATEXES

Effect of ethoxylated nonyl phenol type non-ionic and alkyl sulfate type anionic surfactants on the film formation process of poly (vinyl acetate) and poly (vinyl acetate-acrylate) latexes are discussed. HLB value of non-ionic surfactant is shown to affect glass transition temperature, minimum film formation temperature and rate of film coalescence of vinyl acrylic latexes. Higher HLB non-ionic surfactant appears to be more compatible than the lower HLB ones with the fairly polar vinyl acrylic latex and form a well coalesced film. Presence of sodium lauryl sulfate in the latex is observed to result in incompatible regions on the latex film surface, typical of two phase morphology. Influences of surfactants on the film formation process in the polar vinyl acrylic latexes are compared and contrasted with the available data on the effects of surfactants in styrene butadiene latexes. The findings are discussed in terms of adsorption and interaction behavior of surfactants at polar vinyl acrylic latex surfaces and current theories of latex film formation mechanisms.     

Restricted rotation of the olefin and amine ligands in cis-dichloro(p-toluidine)(ethyl vinyl ether)platinum(II)

cis-Dichloro(p-toluidine)(olefin)platinum(II) complexes, in which the olefin is either ethyl vinyl ether or ethylene, have been investigated by ¹H NMR spectroscopy over a range of temperatures (+50 to ?60° C) in order to study the rotation of the olefin ligand.The results give no evidence of rotation of the amine or vinyl ether ligands even at the highest temperature investigated, +50°C; only one of the two possible rotational isomers is present, and this is attributed to the presence of intramolecular hydrogen bonding between the oxygen atom of the vinyl ether and the -NH- group of the amine.In contrast, the amine and vinyl ligands in the ethylene complex rotate freely at room temperature, coalescence being observed above ?25° C for the ethylene protons.     

Nonequilibrium features of the association between poly(vinylamine) and sodium dodecyl sulfate: the validity of the colloid dispersion concept

The effect of different mixing protocols on the bulk and surface properties of the aqueous mixtures of linear poly(vinylamine) (PVAm) and sodium dodecyl sulfate (SDS) has been investigated using pH, electrophoretic mobility, dynamic light scattering, coagulation kinetics, and surface tension measurements. For the preparation of the solutions, two kinds of mixing protocols were applied. The so-called "stop flow mixing" enables a very rapid mixing whereas in the case of "gentle mixing" the mixing of the components is less efficient. At high surfactant concentrations a kinetically stable colloid dispersion of the PVAm/SDS particles is formed via the application of the stop flow mixing method. The mixing protocols have a significant effect on the bulk properties of the PVAm/SDS system, in particular, at the low pH range and at large PVAm concentrations. The effect of mixing can be qualitatively understood in terms of the enhanced local rate of coagulation of the PVAm/SDS complexes as well as of the appearance of polyelectrolyte/surfactant aggregates via the application of a less efficient mixing. The study also reveals that the applied methods of solution preparation do not have a major impact on the bound amount of the surfactant as well as on the surface tension isotherms of the system. This latter finding is attributed to the hindered adsorption of the large polyelectrolyte/surfactant aggregates at the air/water interface.     

Characterizing the distribution of nonylphenol ethoxylate surfactants in water-based pressure-sensitive adhesive films using atomic-force and confocal Raman microscopy

Surfactant distributions in model pressure-sensitive adhesive (PSA) films were investigated using atomic force microscopy (AFM) and confocal Raman microscopy (CRM). The PSAs are water-based acrylics synthesized with n-butyl acrylate, vinyl acetate, and methacrylic acid and two commercially available surfactants, disodium (nonylphenoxypolyethoxy)ethyl sulfosuccinate (anionic) and nonylphenoxypoly(ethyleneoxy) ethanol (nonionic). The ratio of these surfactants was varied, while the total surfactant content was held constant. AFM images demonstrate the tendency of anionic surfactant to accumulate at the film surfaces and retard latex particle coalescence. CRM, which was introduced here as a means of providing quantitative depth profiling of surfactant concentration in latex adhesive films, confirms that the anionic surfactant tends to migrate to the film interfaces. This is consistent with its greater water solubility, which causes it to be transported by convective flow during the film coalescence process. The behavior of the nonionic surfactant is consistent with its greater compatibility with the polymer, showing little enrichment at film interfaces and little lateral variability in concentration measurements made via CRM. Surfactant distributions near film interfaces determined via CRM are well fit by an exponential decay model, in which concentrations drop from their highs at interfaces to plateau values in the film bulk. It was observed that decay constants are larger at the film-air interface compared with those obtained at the film-substrate side indicating differences in the mechanism involved. In general, it is shown here that CRM acts as a powerful compliment to AFM in characterizing the distribution of surfactant species in PSA film formation.     

水/有机两相体系 1-癸烯氢氨甲基化反应中 TPPTS 和TPPDS 的协同效应

 在 RhCl(CO)(TPPTS)2-TPPTS[P(m-C6H4SO3Na)3]/TPPDS[C6H5P(m-C6H4 SO3Na)2]-CTAB (十六烷基三甲基溴化铵) 水-有机两相催化体系中, 系统考察了 TPPTS/TPPDS 摩尔比、反应压力、阳离子表面活性剂结构及其浓度对 1-癸烯氢氨甲基化反应区域选择性的影响. 结果表明, TPPDS 的加入对生成胺的区域选择性的影响非常大. 当 TPPTS/TPPDS 摩尔比为 4 时, 直链胺和支链胺之比由不加 TPPDS 时的 8.2 增加到 21.0. 可见, TPPTS 和 TPPDS 存在着明显的协同效应. 阳离子表面活性剂的结构对生成胺的区域选择性影响也很大, 加入双长链阳离子表面活性剂时区域选择性远低于单长链阳离子表面活性剂, 且形成的聚集体越紧密, 越有利于提高产物正/异比.     

Nanoscale aggregate structures of trisiloxane surfactants at the solid-liquid interface

The self-associating structures at the solid-liquid interface of three nonionic trisiloxane surfactants ((CH3)3SiO)2Si(CH3)(CH2)3(OCH2CH2)n OH (n = 6, 8, and 12), or BEn, are studied as a function of substrate properties by atomic force microscopy (AFM) imaging and force measurement. These trisiloxane surfactants are known as superwetters, which promote rapid spreading of dilute aqueous solutions on low-energy surfaces. This study also attempts to relate the BEn surface aggregate structures at the solid-liquid interface to their superwetting behavior. Four substrates are used in the study: muscovite mica, highly oriented pyrolytic graphite, and oxidized silicon wafer with and without a full monolayer of self-assembled n-octadecyltrichlorosilane (OTS). The concentration of BEn is fixed at 2 times the critical aggregation concentration (CAC). The BEn surfactants are only weakly attracted to hydrophilic surfaces, more on oxidized silicon than on mica. All three form ordinary planar monolayers on HOPG and OTS-covered oxidized silicon. The significance of surfactant adsorption on the AFM tip is investigated by comparing the force curves obtained by tips with and without thiol modification. The surface aggregate structures of the BEn surfactants correlate with their bulk structures and do not exhibit anomalous adsorption behavior. The adsorption behavior of the BEn superwetters is similar to that of the CmEn surfactants. Thus, our results confirm previous work showing that superwetting shares its main features with other classes of surfactants.