Concanavalin A Binding on PHEMA Beads and Their Interactions with Myeloma Cells

The aim of this study is to prepare concanavalin A (Con A) bound poly(2-hydroxy ethyl methacrylate) (PHEMA) beads for cell affinity chromatography. In the first step, PHEMA beads were produced by suspension polymerization, and activated by cyanogen bromide (CNBr) in an alkaline medium (pH 11.5), and then, the bio-ligand “Con A” was attached by covalent binding onto the CNBr activated beads. PHEMA beads were characterized by scanning electron microscopy (SEM), surface area and pore size measurements. The PHEMA beads have a spherical shape and porous structure. The specific surface area of the PHEMA beads was found to be 39.7 m²/g with a size range of 150–200 μm in diameter and the swelling ratio was 55%. The amount of bound Con A was controlled by changing pH and the initial concentrations of CNBr and Con A. The non-specific adsorption of Con A on the plain PHEMA beads was 0.1 mg/g. The maximum Con A binding was 4.8 mg/g at pH 7.25. Both plain and Con A bound PHEMA beads were interacted first with the myeloma cell suspension in phosphate buffer. Myeloma cell attachment was very low for the plain PHEMA beads, while the number of myeloma cells attached increased almost 20 fold when the Con A bound beads were used. In order to look at whether or not the interaction of the Con A bound PHEMA beads and myeloma cells are affected from the biological molecules and other cells in the medium. We selected sheep blood itself as the medium, and mixed with the myeloma cell suspension and changed the environment. Cell adhesion decreased but not very significantly by changing the medium from simple buffer to sheep blood.     

Screening of Dowex® anion-exchange resins for invertase immobilization

Commercial yeast invertase (Bioinvert^®) was immobilized by adsorption on anion-exchange resins, collectively named Dowex^® (1×8:50–400, 1×4:50–400, and 1×2:100–400). Optimal binding was obtained at pH 5.5 and 32°C. Among different polystyrene beads, the complex Dowex-1×4–200/invertase showed a yield coupling and an immobilization coefficient equal to 100%. The thermodynamic and kinetic parameters for sucrose hydrolysis for both soluble and insoluble enzyme were evaluated. The complex Dowex/invertase was stable without any desorption of enzyme from the support during the reaction, and it had thermodynamic parameters equal to the soluble form. The stability against pH presented by the soluble invertase was between 4.0 and 5.0, whereas for insoluble enzyme it was between 5.0 and 6.0. In both cases, the optimal pH values were found in the range of the stability interval. The K _m and V _max for the immobilized invertase were 38.2 mM and 0.0489 U/mL, and for the soluble enzyme were 40.3 mM and 0.0320 U/mL.     

Immobilization of prostaglandin synthetase by hydrophobic adsorption

In this article, the immobilization of prostaglandin synthetase onn-alkyl or aryl amino-agar beads by hydrophobic adsorption is reported. The effects of different hydrophobic groups in the agar beads, pH of buffer, concentration of salts on the adsorption of prostaglandin synthetase, and the properties of immobilized prostaglandin synthetase were also studied. The results showed that 20–35 mg of microsome containing PG synthetase (protein content 8–15 mg) could be adsorbed on each gram ofn-dodecylamino-agar beads after suction drying the gel in the buffer of pH 5.5 (containing 0.5 mol/L KC1), 0.1 mol/L citric-phosphate at 4‡C. The remaining immobilized enzyme activity was over 80%. The optimum pH of immobilized PG synthetase is 8.0, similar to that of the native enzymes. The thermostability of immobilized PG synthetase in the buffer containing 0.5 mol/L KC1 was increased. Immobilized PG synthetase was used as a catalyst of synthesis of prostaglandin E₁. The preservation of activity after 10 working cycles was 86.2%.     

Investigation of Yeast Invertase Immobilization onto Cupric Ion-Chelated,Porous, and Biocompatible Poly(Hydroxyethyl Methacrylate-<Emphasis Type="Italic">n</Emphasis>-Vinyl Imidazole) Microspheres

Cupric ion-chelated poly(hydroxyethyl methacrylate-n-vinyl imidazole) (poly(HEMA-VIM)) microspheres prepared by suspension polymerization were investigated as a specific adsorbent for immobilization of yeast invertase in a batch system. They were characterized by scanning electron microscopy, surface area, and pore size measurements. They have spherical shape and porous structure. The specific surface area of the p(HEMA-VIM) spheres was found to be 81.2 m²/g with a size range of 70–120 μm in diameter, and the swelling ratio was 86.9%. Then, Cu(II) ion chelated on the microspheres (546 μmol Cu(II)/g), and they were used in the invertase adsorption. Maximum invertase adsorption was 51.2 mg/g at pH 4.5. Cu(II) chelation increases the tendency from Freundlich-type to Langmuir-type adsorption model. The optimum activity for both free and adsorbed invertase was observed at pH 4.5. The optimum temperature for the poly(HEMA-VIM)/Cu(II)-invertase system was found to be at 55 °C, 10 °C higher than that of the free enzyme at 45 °C. V _max values were determined as 342 and 304 U/mg enzyme, for free and adsorbed invertase, respectively. K _m values were found to be same for free and adsorbed invertase (20 mM). Thermal and pH stability and reusability of invertase increased with immobilization.     

Immunoadsorption of cholesterol on protein A oriented beads

Anti-low density lipoprotein antibody (anti-LDL) molecules were attached covalently and oriented through Protein A onto poly(2-hydroxyethyl methacrylate-ethylene glycol dimethacrylate) [poly(HEMA-EGDMA)] beads in order to remove cholesterol specifically from hypercholesterolemic human plasma. Poly(HEMA-EGDMA) beads were produced by suspension polymerization. Blood compatibility tests were performed. All the clotting times were increased when compared with control plasma. Loss of platelets and leukocytes was very low. The maximum anti-LDL attachment was 11.6 mg . g(-1) in the case of random immobilization and 28.3 mg . g(-1) in the case of oriented immobilization. In the latter case, Protein A loading was 8.3 mg . g(-1) at pH 7.5 (borate buffer, 0.15 M NaCl). There was low non-specific cholesterol adsorption onto the poly(HEMA-EGDMA) beads, about 0.83 mg . g(-1). Random and oriented anti-LDL attached beads adsorbed 8.2 mg and 11.7 mg cholesterol per g of bead from hypercholesterolemic human plasma, respectively. Up to 96% of the adsorbed cholesterol was desorbed. The binding-elution cycle was repeated 6 times using the same beads. There was no significant loss of binding capacity.     

壳聚糖–精氨酸树脂固定化胰凝乳蛋白酶及其性质

以自制的多孔、具柔性亲水手臂的壳聚糖–精氨酸树脂为载体,戊二醛为交联剂固定胰凝乳蛋白酶,确定了酶与载体的最佳比例为20 mg酶/g湿树脂,交联剂的最佳用量为10 mL 1.0%戊二醛/1.5 g湿树脂,交联时间为60 min,所得固定化酶的活力回收率达68.95%。固定化胰凝乳蛋白酶的Km为8.36 mg/mL,比游离酶增大1.52倍,其酶促反应10 min达到最大速率,具有接近游离酶的催化时间进程曲线;其最适温度为70 ℃,比游离酶升高10 ℃;其最适pH值为5.92,比游离酶酸性偏移2个pH值。此外,固定化胰凝乳蛋白酶具有良好的热稳定性和贮存稳定性,75 ℃时的半衰期为8 h,4 ℃时的半衰期为46天。     

Immobilization of glucose isomerase and its application in continuous production of high fructose syrup

Bilayer glucose isomerase was immobilized in porousp-trimethylaminepolystyrene (TMPS) beads through a molecular deposition technique. Some of the factors that influence the activity of immobilized glucose isomerase were optimized, with the enzyme concentration of 308 IU/mL, enzyme-to-matrix ratio of 924 IU/g wet carrier, and hexamethylene bis(trimethylammonium iodine) concentration of 15 mg/mL giving the maximum catalytic activity (2238 IU/g dry gel) of the immobilized bilayer glucose isomerase, retaining 68.5% of the initially added activity. The half-life of the immobilized bilayer glucose isomerase was approx 45 d at pH 8.5, 60°C, with 50% (w/v) glucose as substrate. The specific productivity of the immobilized bilayer glucose isomerase was 223 g dry D-glucose/g dry immobilized enzyme per d.     

Immobilization of glucose isomerase and its application in continuous production of high fructose syrup

Bilayer glucose isomerase was immobilized in porousp-trimethylamine-polystyrene (TMPS) beads, through a molecular deposition technique. Some of the factors that influence the activity of immobilized glucose isomerase were optimized, with the enzyme concentration of 308 IU/mL, enzyme:matrix ratio of 924 IU/g wet carrier, and hexamethylenebis(trimethylammonium iodine) concentration of 15 mg/mL, giving the maximum catalytic activity (2238 IU/g dry gel) of the immobilized bilayer glucose isomerase, retaining 68.5% of the initially added activity. The half-life of the immobilized bilayer glucose isomerase was approx 45 d at pH 8.5, 60°C, with 50% (w/v) glucose as substrate. The specific productivity of the immobilized bilayer glucose isomerase was 223 g dry D-glucose/g dry immobilized enzyme per day.     

Immobilization of ß-Galactosidase on Benzoquinone-Activated Bead-Cellulose1

ß-galactosidase from Escherichia coli was immobilized on porous bead cellulose by a benzoquinone coupling method. Optimum conditions for activation and coupling were investigated, and the kinetic parameters of the immobilized enzyme described. The binding capacity was 15.6mg/g of wet conjugate, corresponding to 109 mg/g dry matrix. A saturation activity of 4100 U/g dry cellulose beads was achieved. The apparent Michaelis constant of the immobilized ß-galactosidase at pH 7.6 for orthonitrophenylgalactopyranoside was 2.4 x 10-3 mol/liter, as compared to 2.4 x 10-4 mol/liter of the native enzyme. The stability of benzoquinone-activated bead cellulose and of immobilized ß galactosidase were also determined.     

漆酶在纳米金溶胶/多重壁碳纳米管复合载体上固定方法的比较及粒子尺寸效应

以纳米金溶胶（NGS）和多重壁碳纳米管（MWCNTs）的共混物(NGS/MWCNTs)作为固定漆酶的载体,研究了3种固定漆酶方法在酶固定量、比活力上的差异。 研究了不同的固定方法对固定酶热稳定性和重复使用性及纳米金溶胶颗粒粒径对酶固定量和固定酶动力学参数的影响。 实验结果表明,NGS/MWCNTs具有良好的固定漆酶能力和高固酶比活力,NGS/MWCNTs（NGS粒径37 nm）通过简单物理吸附法固定漆酶的量和固酶的比活力最高,分别可达33.80 mg/g和9.433 U/mg。 在NGS-MWCNTs上采用化学键合方法固定的漆酶在70 ℃放置2 h后仍然保持初始活力的75％,重复使用20次后仍保持初始活力的70％。 纳米金溶胶粒子越小（24 nm）,底物和固定漆酶间亲和力越好（KM=0.027 mmol/L）,表观速率常数越大。     

Immobilization of <Emphasis Type="Italic">Escherichia coli</Emphasis> novablue γ-glutamyltranspeptidase in Ca-alginate-<Emphasis Type="Italic">k</Emphasis>-carrageenan beads

The recombinant Escherichia coli gamma-glutamyltranspeptidase (EcGGT) was immobilized in Ca-alginate-kappa-carrageenan beads. Effects of alginate concentration, amount of loading enzyme, and bead size on the entrapped activity were investigated. Optimum alginate concentration for EcGGT immobilization was found to be 2% (w/v). Using a loading enzyme concentration of 1.5 mg/g alginate, maximum enzyme activity was observed. With increase in bead size from 1.9 to 3.1 mm, the immobilization efficiency was decreased significantly because of mass transfer resistance. Thermal stability of the free EcGGT was increased as a result of the immobilization. Ca-alginate-kappa-carrageenan-EcGGT beads were suitable for up to six repeated uses, losing only 45% of their initial activity. Upon 30 days of storage the preserved activity of free and immobilized enzyme were found as 4% and 68%, respectively. The synthesis of L: -theanine was performed in 50 mM Tris-HCl buffer (pH 10) containing 25 mM L: -glutamine, 40 mM ethylamine, and 1.5 mg EcGGT/g alginate at 40 degrees C for 12 h, and a conversion rate of 27% was achieved.     

Immobilization of peroxidase on SiO2 surfaces with the help of a dendronized polymer and the avidin-biotin system

Horseradish peroxidase (HRP) is immobilized in three easy steps on SiO(2) surfaces with the help of a polycationic second generation dendronized polymer (denpol) and the biotin-avidin system. This stepwise immobilization process is monitored and quantitatively analyzed with the transmission interferometric adsorption sensor. Partially biotinylated denpol is first adsorbed onto SiO(2) , followed by addition of avidin and then of biotinylated HRP. Denpols in their molecular structure combine properties of polymers as well as dendrimers which are found to be of clear advantage for this type of non-covalent enzyme immobilization. With respect to the reproducibility of the adsorption process and with respect to the stability of the adsorbed polymer layer, the denpol is superior to α-poly-D-lysine which is used as a reference polymer. Furthermore, HRP immobilized with the denpol on commercial glass slides remains considerably more active upon storage as compared to HRP immobilized with the help of α-poly-D-lysine with a similar number of repeating units. The ease of the denpol-mediated HRP immobilization and the high stability of the immobilized enzyme are promising for bioanalytical applications.     

Enhanced and selective adsorption of mercury ions on chitosan beads grafted with polyacrylamide via surface-initiated atom transfer radical polymerization

Enhanced and selective removal of mercury ions was achieved with chitosan beads grafted with polyacrylamide (chitosan-g-polyacrylamide) via surface-initiated atom transfer radical polymerization (ATRP). The chitosan-g-polyacrylamide beads were found to have significantly greater adsorption capacities and faster adsorption kinetics for mercury ions than the chitosan beads. At pH 4 and with initial mercury concentrations of 10-200 mg/L, the chitosan-g-polyacrylamide beads can achieve a maximum adsorption capacity of up to 322.6 mg/g (in comparison with 181.8 mg/g for the chitosan beads) and displayed a short adsorption equilibrium time of less than 60 min (compared to more than 15 h for the chitosan beads). Coadsorption experiments with both mercury and lead ions showed that the chitosan-g-polyacrylamide beads had excellent selectivity in the adsorption of mercury ions over lead ions at pH < 6, in contrast to the chitosan beads, which did not show clear selectivity for either of the two metal species. Mechanism study suggested that the enhanced mercury adsorption was due to the many amide groups grafted onto the surfaces of the beads, and the selectivity in mercury adsorption can be attributed to the ability of mercury ions to form covalent bonds with the amide. It was found that adsorbed mercury ions on the chitosan-g-polyacrylamide beads can be effectively desorbed in a perchloric acid solution, and the regenerated beads can be reused almost without any loss of adsorption capacity.     

Immobilization and Properties of Lipase from Candida rugosa on Electrospun Nanofibrous Membranes with Biomimetic Phospholipid Moities

Reported here is a protocol to fabricate a biocatalyst with high enzyme loading and activity retention, from the conjugation of electrospun nanofibrous membrane having biomimetic phospholipid moiety and lipase. To improve the catalytic efficiency and activity of the immobilized enzyme, poly（acrylonitrile-co-2-methacryloyloxyethyl phosphorylcholine）s（PANCMPCs） were, respectively, electrospun into nanofibrous membranes with a mean diameter of 90 nm, as a support for enzyme immobilization. Lipase from Candida rugosa was immobilized on these nanofibrous membranes by adsorption. Properties of immobilized lipase on PANCMPC nanofibrous membranes were compared with those of the lipase immobilized on the polyacrylonitrile（PAN） nanofibrous and sheet membranes, respectively. Effective enzyme loading on the nanofibrous membranes was achieved up to 22.0 mg/g, which was over 10 times that on the sheet membrane. The activity retention of immobilized lipase increased from 56.4% to 76.8% with an increase in phospholipid moiety from 0 to 9.6%（molar fraction） in the nanofibrous membrane. Kinetic parameter Km was also determined for free and immobilized lipase. The Km value of the immobilized lipase on the nanofibrous membrane was obviously lower than that on the sheet membrane. The optimum pH was 7.7 for free lipase, but shifted to 8.3-8.5 for immobilized lipases. The optimum temperature was determined to be 35 ℃ for the free enzyme, but 42-44℃ for the immobilized ones, respectively. In addition, the thermal stability, reusability, and storage stability of the immobilized lipase were obviously improved compared to the free one.     

The separation of GMP from milk whey using the modified chitosan beads

The cationic property of chitosan was used to adsorb glycomacropeptide (GMP) molecules from milk whey proteins. β-cyclodextrin was immobilized to native chitosan beads by cross-linking with 1,6-hexamethylene diisocyanate (HMDI). The resultant modified beads (CS-HMDI-BCD) presented superior adsorption affinity and capacity towards GMP. At pH 3.0, 90.23% of GMP was adsorbed with a maximum adsorption capacity corresponding to 12.87 mg of sialic acid/g-adsorbent. Desorption experiments showed that the modified beads could be regenerated and used in many cycles without significant decreases in the capacity and selectivity.     

A novel adsorbent for protein chromatography: supermacroporous monolithic cryogel embedded with Cu2+-attached sporopollenin particles

The aim of this study is to prepare supermacroporous cryogels embedded with Cu(2+)-attached sporopollenin particles (Cu(2+)-ASP) having large surface area for high protein adsorption capacity. Supermacroporous poly(2-hydroxyethyl methacrylate) (PHEMA)-based monolithic cryogel column embedded with Cu(2+)-ASP was prepared by radical cryo-copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N,N'-methylene-bis-acrylamide (MBAAm) as cross-linker directly in a plastic syringe for affinity purification of human serum albumin (HSA). Firstly, Cu(2+) ions were attached to sporopollenin particles (SP), then the supermacroporous PHEMA cryogel with embedded Cu(2+)-ASP was produced by free radical polymerization using N,N,N',N'-tetramethylene diamine (TEMED) and ammonium persulfate (APS) as initiator/activator pair in an ice bath. Embedded particles (10 mg) in PHEMA-based cryogel column were used in the adsorption/desorption of HSA from aqueous solutions. Optimum conditions of adsorption experiments were performed at pH 8.0 phosphate buffer, with flow rate of 0.5 mL/min, and at 5°C. The maximum amount of HSA adsorption from aqueous solution was very high (677.4 mg/g SP) with initial concentration 6 mg/mL. It was observed that HSA could be repeatedly adsorbed and desorbed to the embedded Cu(2+)-ASP in PHEMA cryogel without significant loss of adsorption capacity.     

Surface area of pretreated lignocellulosics as a function of the extent of enzymatic hydrolysis

Partially purified S1 nuclease was bound through its carbohydrate moiety to Con A-Sepharose containing increasing amounts of lectin. The retention of activity was high, varying essentially from 75% on the "low lectin" matrix (1 mg Con A/mL of Sepharose), to no detectable activity on the "high lectin" matrix (8 mg Con A/mL of Sepharose). However, approximately 50% activity could be restored in "high lectin" matrix when the coupling was carried out in the presence of glucose, suggesting that the loss of activity on the "high lectin" matrix is caused by conformational changes brought about by the multiple attachment of the enzyme to the matrix. Interaction of Con A with S1 nuclease was used to predict the nature of carbohydrate moiety and its location with respect to the active site of the enzyme. Immobilization resulted in an increase in the optimum temperature, pH, and temperature stabilities, but it did not affect the pH optimum. A marginal increase in the apparent Km was observed. The bound enzyme also showed enhanced stability toward 8 M urea. On repeated use, the bound enzyme retained more than 80% of its initial activity after 6 cycles. These results are discussed taking into consideration the factors affecting immobilized enzymes. In addition, the potential use of immobilized S1 nuclease as an analytical tool is discussed.     

Immobilization of Urease on (HEMA/IA) Hydrogel Prepared by Gamma Radiation

In the present study, the copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) were synthesized by gamma radiation induced radical polymerization, in order to examine the potential use of these hydrogels in immobilization of Citrullus vulgaris urease. Gelation and Swelling properties of PHEMA and copolymeric P (HEMA/IA) hydrogels with different IA contents (96.5/3.5, 94.4/5.6 and 92.5/7.5 mol) were studied in a wide pH range. Initial studies of so-prepared hydrogels show interesting pH sensitivity in swelling and immobilization. C. vulgaris urease was immobilized on HEMA/IA (92.5/7.5) at 6 kGy with 41.3% retention of activity. The properties of free and immobilized urease were compared. Immobilized urease maintained a higher relative activity than free urease at both lower and higher pH levels, indicating that the immobilized urease was less sensitive to pH changes than the free urease. The K_m value of the immobilized urease was approximately 2 times higher than that of the free urease. Temperature stability was improved for immobilized enzyme. The free form exhibited a loss about 80% of activity upon incubation for 15 min at 80°C. The influence of various heavy metal ions at the concentration of l mM was improved after enzyme immobilization. The immobilization of C. vulgaris urease on HEMA/IA (92.5/7.5) at 6 kGy showed a residual activity of 47 % after 4 reuses.     

吸附-纤维素覆膜联合固定化酶

以食品工业中常用的木瓜蛋白酶为模式酶, 建立了吸附-纤维素覆膜联合固定化酶方法. 通过对吸附载体类别、 纤维素种类及溶剂、 保护剂种类及其浓度、 干燥方式及时间等的优化, 得到最佳的吸附-纤维素覆膜联合固定化酶工艺. 以硅藻土或HPD-417(大孔树脂)作为吸附载体, 甲基纤维素(分子量40000~50000)丙酮溶液作为覆膜溶液, 加入6%(质量分数)的聚乙二醇或麦芽糖作为覆膜保护剂, 于4 ℃干燥9 h, 制得固定化木瓜蛋白酶, 硅藻土吸附-纤维素覆膜固定化酶酶活回收率达到96.50%, HPD-417吸附-纤维素覆膜固定化酶酶活回收率达到93.92%. 对吸附-纤维素覆膜固定化酶的性质进行了研究, 发现纤维素覆膜后固定化酶具有良好的热稳定性, 于80 ℃下保存12 h后, 固定化酶活残余率仍然能保持90%左右; 在pH=4.5~9.5的范围内, 固定化酶的稳定性较好; 连续使用9次后, 固定化酶活残余率仍能保持95%左右.     

A novel support for antibody purification: Fatty acid attached chitosan beads

Linoleic acid attached chitosan beads [poly(LA-Ch)] (1.25 μm in diameter) are obtained by the formation of amide linkages between linoleic acid and chitosan. Poly(LA-Ch) beads are characterized by FTIR, TEM, and swelling studies. Poly(LA-Ch) beads are used for the purification of immunoglobulin-G (IgG) from human plasma in a batch system. The maximum IgG adsorption is observed at pH 7.0 for HEPES buffer. IgG adsorption onto the plain chitosan beads is found to be negligible. Adsorption values up to 136.7 mg/g from aqueous solutions are obtained by poly(LA-Ch) beads. IgG adsorption saw an increase as a result of increasing temperature. Higher amounts of IgG are adsorbed from human plasma (up to 390 mg/g) with a purity of 92%. The adsorption phenomena appeared to follow a typical Langmuir isotherm. It is observed that IgG could be repeatedly adsorbed and desorbed without significant loss when we take into account the adsorption amount. It is concluded that the poly(LA-Ch) beads allowed one-step purification of IgG from human plasma.