Synthesis, structure, and conformation of aza[1n]metacyclophanes

N-Benzyl substituted aza[1n]metacyclophanes (n = 4, 6, 8, and 10) were prepared in overall 40% isolated yields via Pd-catalyzed aminations. Analyses of the reaction mixtures showed that aza[14]metacyclophane and the related polymer were the primary products ( approximately 60% overall yield); aza[1n]metacyclophanes up to n = 14 and linear oligomers with up to 20 nitrogen atoms (with at least three types of end groups) were detected. Macrocyclic structures for n = 4, 6, and 10 were confirmed by X-ray crystallography. 1,3-Alternate (D(2d)) and 1,3,5-alternate (S(6)) conformations in solution on NMR time scale at low temperatures were found for macrocycles with n = 4 and n = 6, respectively; the barrier for ring inversion was considerably lower for the larger macrocycle.     

Disilver(I) rectangular-shaped metallacycles: X-ray crystal structure and dynamic behavior in solution

Reaction of the ditopic semirigid ligand 1,2-bis(imidazolylmethyl)benzene (1,2-bImb) or the flexible ligand 1,4-bis(2-benzimidazolyl)butane (C4BIm) with AgX (X = ClO4-, BF4-, CF3CO2-) afforded five new complexes, namely, [Ag2(1,2-bImb)2](ClO4)2 (1), [Ag2(1,2-bImb)2](BF4)2 (2), [Ag2(1,2-bImb)2](CF3CO2)2.2CH3OH (3.2CH3OH), [Ag2(C4BIm)2](ClO4)2.2DMF (4.2DMF), and [Ag2(C4BIm)2](CF3CO2)2.2H2O (5.2H2O), all of which contain a centrosymmetric, rectangular-shaped cationic disilver(I) metallacycle [Ag2(L)2]2+. In 1-3, a pair of 1,2-bImb ligands takes on the syn conformation to connect two Ag(I) ions to give a compressed rectangle with a transannular Ag...Ag separation of 3.27-3.36 angstroms, whereas in 4 and 5, the pair of planar C4BIm ligands acts in the cis conformation to connect two Ag(I) ions to yield a normal rectangle with a transannular Ag...Ag separation of 7.67-7.91 angstroms. The anions form Ag...O or Ag...F weak interactions in 1-3 and O-H...O or N-H...O hydrogen bonds in 4 and 5 in crystal packing but exhibit no significant influence on the formation of the disilver(I) macrocycles. The solution structure and dynamic behavior of the complexes studied by electrospray ionization mass spectrometry, 1H NMR, and variable-temperature NMR indicated that the dynamic equilibrium between the [Ag2(L)2]2+ cation and the open-ring oligomers or other potential species occurs via solvent-assisted dissociative exchange. The metal-ligand exchange barrier was estimated to be 54.5 kJ mol(-1).     

单炔基桥联双杯[4]芳烃的合成与对溶剂分子的包合性能

对叔丁基杯[4]芳烃直接与1,4-二氯-2-丁炔反应,一步制备了单炔基单桥联双杯[4]芳烃和单炔基双桥联双杯[4]芳烃,并证实单桥联双杯[4]芳烃是双桥联双杯[4]芳烃的中间产物.经¹HNMR,¹³CNMR和ESI-MS分析证实了产物的结构.ESI-MS结果表明两种产物对DMF和H₂O有不同的包合能力.     

Polymer-bound 4-methylcoumarin/1-heptanoyl-5-fluorouracil photodimers: NMR elucidation of dimer structure

Heterodimers based on the polymer-bound chromophore 4-methylcoumarin and the prodrug 1-heptanoyl-5-fluorouracil, synthesized by photochemical [2 + 2]-cycloaddition are promising photoresponsive drug depots. Drug release experiments are one possibility to deliver proof of a successful reversible drug immobilization, whereas NMR spectroscopy is a potent tool for further structural characterization of these polymer-bound heterodimers. In case of the random copolymer poly(methyl methacrylate-co-7-(2'-methacryloyloxyethoxy)-4-methylcoumarin) three dimers have been identified of which the syn head-to-tail was the predominant one. In contrast, only the syn head-to-head dimer was formed in reasonable yield when the 4-methylcoumarin monofunctionalized pMMA was used as the base polymer. 1D and 2D NMR spectroscopic techniques combined with some theoretical calculations helped in successfully closing one major gap concerning polymer bound 4-methylcoumarin/1-heptanoyl-5-fluorouracil heterodimers that are of potential use in photoresponsive drug delivery devices.     

Metal-free and dicopper(II) complexes of Schiff base [2 + 2] macrocycles derived from 2,2'-iminobisbenzaldehyde: syntheses, structures, and electrochemistry

Three new bis-terdentate Schiff base [2 + 2] macrocycles (H(2)L(Et), H(2)L(Pr), and H(2)L(Bu)) have been prepared in high yields by 1:1 condensation of 2,2'-iminobisbenzaldehyde with 1,2-diaminoethane, 1,3-diaminopropane, and 1,4-diaminobutane, respectively. Metalation of these macrocycles yields the corresponding dicopper(II) acetate (1, 2, and 3) and tetrafluoroborate (4, 5, and 6) complexes. The structures of H(2)L(Et), H(2)L(Pr), H(2)L(Bu), [Cu(II)(2)L(i)(OAc)(2)]·solvents (where i is Et, Pr or Bu) and [Cu(II)(2)L(Pr)(DMF)(4)] (BF(4))(2)·0.5H(2)O are reported. Intramolecular hydrogen bonding is a feature of the metal-free macrocycles. The copper(II) centers in [Cu(II)(2)L(i)(OAc)(2)]·solvents are four coordinate, and the macrocycles have U-shaped (Et, Bu) or stepped (Pr) conformations. Complex 5 crystallizes with two dimethylformamide (DMF) molecules bound per five coordinate copper(II) center. Electrochemical studies revealed ligand based oxidations for all of the macrocycles and complexes. Complexes 1 and 2 undergo two quasi-reversible oxidations in DCM which are associated with the deposition of a visible film on the electrode after multiple scans in this oxidative region, suggestive of electropolymerization. Complexes 4-6, studied in MeCN, have Cu(II) → Cu(I) redox potentials at more positive potentials than for 1-3.     

Synthesis and Crystal Structure of a Two-dimensional Zinc(Ⅱ) Coordination Polymer:[Zn2(DTB)(DMF)4(H2O)2]n (DTM= 1,4-Dinitro-2,3,5,6-tetracarboxylatebenzene Tetravalent Anion; DMF = Dimethylformamide)

A two-dimensional coordination polymer [Zn2(DTB)(DMF)4(H2O)2]n has been synthesized by 1,4-dinitro-2,3,5,6-tetracarboxylatebenzenic acid and hydrate zinc perchlorate in the solutions of DMF and H2O. The crystal belongs to the triclinic system, space group P with a = 8.887(6), b = 9.225(6), c = 9.828(7)(°A), α = 85.249(11), β = 74.863(11), γ= 86.510(13)°, V = 774.4(9), Z = 1, C22H32N6O18Zn2, Mr = 799.28, Dc = 1.714 g/cm3, F(000) = 410 and μ= 1.639 mm-1. The structure was refined to R = 0.0539 and wR = 0.1161 for 1584 observed reflections (I ＞ 2б(I)). In the complex there exist two kinds of coordination environments for the zinc(Ⅱ) ions and a two-dimensional sheet is formed via the coordination of carboxylates and zinc(Ⅱ) ions.     

Synthesis and Crystal Structure of a Two-dimensional Zinc(II) Coordination Polymer: [Zn_2(DTB)(DMF)_4(H_2O)_2]_n (DTM= 1,4-Dinitro-2,3,5,6-tetracarboxylatebenzene Tetravalent Anion; DMF = Dimethylformamide)

1 INTRODUCTION For a long time much research interest has beenfocused on coordination polymers because they mayafford new materials with useful properties, such ascatalytic activity, microporosity, electrical conduc-tivity, non-linear optical activit…     

SYNTHESIS AND ELECTRO-OPTICAL PROPERTIES OF POLY(2-ETHYNYLPYRIDINIUMTOSYLATE) HAVING PROPAGYL SIDE CHAIN

Novel conjugated ionic polymer was prepared by the polymerization of 2-ethynylpyridine with propargyl tosylate in refluxing methyl alcohol. The polymerization proceeded well in homogeneous manner to give a relatively high yield of polymer. The resulting poly(2-ethynylpyridinium tosylate) having propargyl side chain [poly(EPT-P)] were hygroscopic and soluble in water, methyl alcohol, DMF, and DMSO. The inherent viscosities of the polymers were in the range of 0.08-0.29dL/g. Instrumental analyses using NMR, IR, and UV-visible spectroscopies and elemental analyses indicated that the resulting poly(EPT-P) have a conjugated ionic polymer backbone carrying N-propargyl-2-pyridinium tosylate. Thermal and electro-optical properties of the polymers were also studied.     

Multicomponent reactions of amino alcohols with CH2O and dithiols in the synthesis of 1,3,5-dithiazepanes and macroheterocycles

A series of new hydroxyl-substituted 1,3,5-dithiazepanes and N,N′-(2-hydroxyethyl)tetrathiadiazacycloalkanes were synthesized by the multicomponent reactions ₍MCRs) of amino alcohols with formaldehyde and α,ω-dithiols. The MCR with 1,2-dithiol proceeds via a (1+2+1)-cyclocondensation with selective formation of 1,3,5-dithiazepanes. Stereochemistry of the dithiazepane ring was determined by X-ray diffraction. The reaction with higher α,ω-dithiols (1,3-propane-, 1,4-butane-, 1,5-pentane-, 1,6-hexanedithiol and 2-[2-(2-sulfanyletoxy)ethoxy]-1-ethanethiol) yielded OH-substituted macroheterocycles as a result of (2+4+2)-cyclocondensation. The structure of the latter was determined by NMR spectroscopy, MALDI–TOF and electrospray ionization methods. The doubly charged ions like [M+2H]²⁺ are found in the ESI spectra of the macrocycles.     

一种新型Ni(Ⅱ)配位聚合物的合成、晶体结构和性质研究

溶剂热法合成了1个新配位聚合物{[Ni(C18H18N4O5)(DMF)]·(DMF}n.通过元素分析、红外光谱、热重以及X-射线单晶洐射对其进行了表征.该晶体为正交晶系,Pna21空间群.该化合物中,C18H18N4O5配体通过5个配位原子以及相邻的溶剂分子DMF上的1个配位原子与Ni(Ⅱ)原子配位,形成了1个扭曲的八面体配位构型.热重分析表明该化合物在140℃开始发生分解.     

Assignment of the relative configuration of spiro[4.5]decanes by 13C, 15N and 17O NMR

The relative configuration of 11 1,4-diazaspiro[4.5]decanes (1a-1j and 1m), 15 1,4-oxazaspiro[4.5]decanes (2a-2o) and 10 1,4-dioxaspiro[4.5]decanes (3a-3n) substituted at the 2-, 6-, 7- or 8-position by a methyl group or using the tert-butyl group as a model for the ananchomeric structure is reported. The relative stereochemistry was analyzed by 1H, 13C, 15N and 17O NMR and all isomers present were characterized spectroscopically. Compounds with a methyl group in the six-membered ring show a chair conformation preference with the methyl group in the equatorial position. Compounds with one or two nitrogens exhibit a tautomeric equilibrium between the imine-diazolidine forms, as demonstrated by IR and 13C NMR.     

Ring-opening polymerisation of silver-diphosphine [M2L3] coordination cages to give [M2L3]infinity coordination polymers

[M2L3] coordination cages and linear [M2L3]infinity polymers of the rigid, bridging diphosphines bis(diphenylphosphino)acetylene (dppa) and trans-1,2-bis(diphenylphosphino)ethylene (dppet) with silver(I) salts have been investigated in the solution and solid states. Unlike flexible diphosphines, 1:1 dppa/AgX mixtures do not selectively form discrete [Ag2(diphos)2(X)2] macrocycles; instead dynamic mixtures of one-, two- and three-coordinate complexes are formed. However, 3:2 dppa/AgX ratios (X = SbF6. BF4, O3SCF3 or NO3) do lead selectively to new [M2L3] triply bridged cage complexes [Ag2(dppa)3(X)2] 1a-d (X = SbF6 a, BF4 b, O3SCF3 c, NO3 d), which do not exhibit Ag-P bond dissociation at room temperature on the NMR time scale (121 MHz). Complexes la-d were characterised by X-ray crystallography and were found to have small internal cavities, helical conformations and multiple intramolecular aromatic interactions. The nucleophilicity of the anion subtly influences the cage shape: Increasing nucleophilicity from SbF6 (1a) through BF4 (1b) and O3SCF3 (1c) to NO3 (1d) increases the pyramidal distortion at the AgP3 centres, stretching the cage framework (with Ag...Ag distances increasing from 5.48 in 1a to 6.21 A in 1d) and giving thinner internal cavities. Crystal packing strongly affected the size of the helical twist angle, and no correlation between this parameter and the Ag-Ag distance was observed. When crystalline 1c was stored in its supernatant for 16 weeks, conversion occured to the isostoichiometric [M2L3]infinity coordination polymer [Ag(dppa)2Ag(dppa)(O3SCF3)2]infinity (1c'). X-ray crystallography revealed a structure with ten-membered Ag2(dppa)2 rings linked into infinite one-dimensional chains by a third dppa unit. The clear structural relationship between this polymer and the precursor cage 1c suggests a novel example of ring-opening polymerisation. With dppet, evidence for discrete [M2L3] cages was also found in solution, although 31P NMR spectroscopy suggested some Ag-P bond dissociation. On crystallisation, only the corresponding ring-opened polymeric structures [M2L3]infinity could be obtained. This may be because the greater steric bulk of dppet versus dppa destabilises the cage and favours the ring-opening polymerisation.     

Synthesis and ring size effect of macrocyclic ethynylhelicene oligomers

[reaction: see text] The cyclization of acyclic ethynylhelicene oligomers with decyl 3,5-diiodobenzoate under optimized conditions gave the corresponding optically active [n+n]cycloalkynes (n = 4-8) in high yields. Their structures were compared in terms of ring size by using (1)H NMR, UV-vis, and CD spectroscopies and vapor pressure osmometry (VPO). The UV-vis spectra exhibited an increase in absorbance in proportion to n. In contrast, the CD spectra of the macrocycles exhibited a large ring size effect, comparable Deltaepsilon values despite the increase in n and temperature-dependent properties of the [8+8]cycloalkyne. It was concluded that [4+4]cycloalkyne, [5+5]cycloalkyne, [6+6]cycloalkyne, and [7+7]cycloalkyne have rigid structures, while [8+8]cycloalkyne has a flexible structure.     

Synthesis,X-ray crystal structure,UV/visible linear and nonlinear (optical limiting) spectral properties of symmetrical and unsymmetrical porphyrazines with annulated 1,2,5-thiadiazole and 1,4-diamyloxybenzene moieties

Co-cyclization of 1,2,5-thiadiazole-3,4-dicarbonitrile and 3,6-diamyloxyphthalodinitrile in the presence of magnesium or lithium amylate in amyl alcohol leads to mixtures containing the Mg derivatives of the symmetrical species tetrakis(1,2,5-thiadiazolo)porphyrazine, (S(4))PzH(2), and tetrakis(1,4-diamyloxybenzo)porphyrazine, (A(4))PzH(2), and the low-symmetry macrocycles bearing peripheral 1,2,5-thiadiazole and 1,4-diamyloxybenzene rings in the ratio 1:3, 2:2 (cis and trans), and 3:1, that is, (SA(3))PzH(2), (S(2)A(2))PzH(2), (SASA)PzH(2), and (S(3)A)PzH(2), respectively. The basic Mg materials were converted to the corresponding free-base macrocycles by treatment with CF(3)COOH. The species were separated from the mixtures by chromatography, either as Mg complexes or demetalated materials. With results on (S(4))PzH(2) and (SA(3))PzH(2) in hand, including crystallographic work on the latter, a general chemical physical investigation has been carried out of all the symmetrical and unsymmetrical free-base macrocycles. The structures of the species (S(2)A(2))PzH(2) and (A(4))PzH(2). were elucidated by single-crystal X-ray crystallography. The effect of the progressive variation of the macrocyclic structure along the series, from the symmetrical (S(4))PzH(2) to its symmetrical partner (A(4))PzH(2) via the low-symmetry 3:1, 2:2 (cis and trans), and 1:3 macrocycles, was studied by IR, (1)H NMR, and UV/Vis linear and nonlinear (optical limiting) measurements. The results are interpreted on the basis of intra- and intermolecular interactions between the electron-deficient 1,2,5-thiadiazole and the electron-donating 1,4-diamyloxybenzene moieties.     

Manganese(III) Acetate Catalyzed Oxidative Radical Additions of α‐Dicarbonyl Compounds to 1‐ and 2‐Phenylcyclohepta‐1,3,5‐triene

Manganese(III) acetate catalyzed oxidative radical‐addition reactions of α‐dicarbonyl compounds such as methyl acetoacetate ( 6 ), acetylacetone ( 7 ), and dimedone ( 8 ) to the mixture of 1‐ and 2‐phenylcyclohepta‐1,3,5‐triene ( 4 and 5 ) were investigated (Scheme 1). The 1‐phenylcyclohepta‐1,3,5‐triene ( 4 ) formed mainly [2+3] and [4+3] dihydrofuran addition products derived from cycloheptatriene and [2+3] dihydrofuran addition products derived from the norcaradiene structure. The 2‐phenylcyclohepta‐1,3,5‐triene ( 5 ) formed mainly [6+3] dihydrofuran addition products derived from cycloheptatriene and [4+3] dihydrofuran addition products derived from the norcaradiene structure. The structures of isolated products were established by their spectroscopic data (IR, ¹H‐ and ¹³C‐NMR, MS, and elemental analysis) and comparison with literature data. The formation mechanism of the products is discussed.     

Efficient Cu(I) acetate‐catalyzed cycloaddition of multifunctional alkynes and azides: From solution to bulk polymerization

“Click” chemistry is an effective and commonly used technique in polymer chemistry for the synthesis and modification of polymers. In this study, the bulk polymerization of multifunctional alkynes and azides was achieved by the copper(I)‐catalyzed alkyne–azide 1,3‐dipolar cycloaddition. The influence of different catalyst systems on the polymerization kinetics of the “click”reaction were evaluated by differential scanning calorimetry. Surprisingly, Cu(I) acetate showed the most efficient catalytic behavior among the applied Cu(I) salts. The polymerization kinetics in solution were investigated by 1H NMR spectroscopy and size exclusion chromatography. According to the 1H NMR investigation the copper(I)‐catalyzed cycloaddition follows a second‐order kinetics with external catalysis. Additionally, the mechanical properties of the resulting polymers were investigated by depth sensing indentation. Thereby the polymerizations of the alkyne tripropargylamine with the azides 1,3‐bis(azidomethyl)benzene and 1,4‐bis(azidomethyl)benzene resulted in mechanical hard materials. Furthermore, the combination of the alkynes tripropargylamine and di(prop‐2‐yn‐1‐yl) isophorone dicarbamate and polymerization with 1,2‐bis(2‐azidoethoxy)ethane resulted in high indentation moduli. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 239–247     

Synthesis,characterization, and ring opening polymerization of poly(1,4‐cyclohexylenedimethylene terephthalate) cyclic oligomers

Cyclic oligomers of poly(1,4‐cyclohexylenedimethylene terephthalate) (PCT) were prepared by reaction of 1,4‐cyclohexanedimethanol (CHDM) with terephthaloyl chloride under diluted conditions and separated from the linear products by silica gel column at a yield of 23.7 wt %. Cyclic dimer, trimer, tetramer, pentamer, and hexamer were further separated by high performance liquid chromatography, and found to constitute 98% of the cyclics mixtures. The structures of PCT cyclics were confirmed by means of mass spectrometry, Fourier transform infrared, and ¹H NMR analysis. A series of experiments were carried out to study the effects of catalysts and cis/trans configuration of isomers of CHDM on the yield of cyclic oligomers. Ring opening polymerization of the cyclic oligomers was carried out by heating the sample mixtures at 310 °C for 30 min in the presence of antimony oxide. Polymerization was confirmed by inherent viscosity changes and infrared spectra of the resulting polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1828–1833, 2000     

Synthesis and ring‐opening polymerization of macrocyclic (arylene thioether ketone) oligomers

Macrocyclic (arylene thioether ketone) oligomers together with a linear poly(phenylene sulfide ketone) oligomer were synthesized by a one‐step reaction. The macrocycles and linear oligomer were fully characterized by ¹³C‐NMR, H‐NMR, matrix assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS), differential scanning calorimetry (DSC) and FT‐IR. Uncatalyzed, simultaneously ring‐opening polymerization (ROP) of the macrocycles and the mixture of macrocycles and linear oligomer were carried out under dynamic heating conditions. The ROP temperature of the macrocycles decreased upon mixing it with the linear oligomer. The ROP conditions and mechanism were investigated and discussed. The macrocycles and their mixture show potential applications in high temperature adhesives and sealants. Copyright © 2006 John Wiley & Sons, Ltd.     

ABCD 4‐miktoarm star quarterpolymers using click [3 + 2] reaction strategy

Two samples of ABCD 4‐miktoarm star quarterpolymer with A = polystyrene (PS), B = poly(ε‐caprolactone) (PCL), C = poly(methyl methacrylate) (PMMA) or poly(tert‐butyl acrylate) (PtBA), and D = poly(ethylene glycol) (PEG) were prepared using click reaction strategy (Cu(I)‐catalyzed Huisgen [3 + 2] reaction). Thus, first, predefined block copolymers of different polymerization routes, PS‐b‐PCL with azide and PMMA‐b‐PEG and PtBA‐b‐PEG copolymers with alkyne functionality, were synthesized and then these blocks were combined together in the presence of Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst in DMF at room temperature to give the target 4‐miktoarm star quarterpolymers. The obtained miktoarm star quarter polymers were characterized by GPC, NMR, and DSC measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1218–1228, 2008     

Synthesis of functional polymers with acetal-monosaccharide moieties

The polycondensation of methyl α-D-mannopyranoside ( 1 ) with 1,n-bis(formylphenoxy)alkanes ( 2 ), using acidic catalysts, leads to the formation of linear polymers and macrocyclic compounds. The structure of the polymer and macrocycles was determined by ¹H, ¹³C NMR spectroscopy and ESI-MS analysis.