Dual Electrospun Supramolecular Polymer Systems for Selective Cell Migration

Dual electrospinning can be used to make multifunctional scaffolds for regenerative medicine applications. Here, two supramolecular polymers with different material properties are electrospun simultaneously to create a multifibrous mesh. Bisurea (BU)‐based polycaprolactone, an elastomer providing strength to the mesh, and ureido‐pyrimidinone (UPy) modified poly(ethylene glycol) (PEG), a hydrogelator, introducing the capacity to deliver compounds upon swelling. The dual spun scaffolds are modularly tuned by mixing UPyPEG hydrogelators with different polymer lengths, to control swelling of the hydrogel fiber, while maintaining the mechanical properties of the scaffold. Stromal cell derived factor 1 alpha (SDF1α) peptides are embedded in the UPyPEG fibers. The swelling and erosion of UPyPEG increase void spaces and released the SDF1α peptide. The functionalized scaffolds demonstrate preferential lymphocyte recruitment proposed to be created by a gradient formed by the released SDF1α peptide. This delivery approach offers the potential to develop multifibrous scaffolds with various functions.     

海藻酸盐/壳聚糖衍生物复合抗菌纤维

通过溶液纺丝法制备海藻酸盐/羧甲基壳聚糖（CMC）共混纤维,并用红外光谱,X射线衍射和扫描电镜对共混纤维进行了表征.结果表明：共混体系中的两种组分之间存在着较强的相互作用,有良好的相容性.当ωCMC=0.30时,共混纤维的干态抗张强度达到最大值,13.8cN/tex.当ωCMC=0.10时,纤维的干态断裂伸长率可达23.1%.纤维的湿态抗张强度和断裂伸长率随着CMC含量的增加而降低.CMC的引入,可显著提高纤维的吸水率.用壳聚糖季铵盐对纤维进行处理,可赋予纤维抗菌性.     

Melt Processing of Chitosan‐Based Fibers and Fiber‐Mesh Scaffolds for the Engineering of Connective Tissues

We report the production of chitosan‐based fibers and chitosan fiber‐mesh structures by melt processing (solvent‐free) to be used as tissue‐engineering scaffolds. The melt‐based approach used to produce the scaffolds does not change their main characteristics, including the surface roughness and microporosity. The porosity, pore size, interconnectivity and mechanical performance of the scaffolds are all within the range required for various tissue‐engineering applications. Biological assessments are performed in direct‐contact assays. Cells are able to colonize the scaffold, including the inner porous structure. The cells show high indices of viability in all of the scaffold types.

     

Conductive macroporous composite chitosan-carbon nanotube scaffolds

Multiwalled carbon nanotubes (MWCNTs) were used as doping material for three-dimensional chitosan scaffolds to develop a highly conductive, porous, and biocompatible composite material. The porous and interconnected structures were formed by the process of thermally induced phase separation followed by freeze-drying applied to an aqueous solution of 1 wt % chitosan acetic acid. The porosity was characterized to be 97% by both mercury intrusion porosimetry measurements and SEM image analysis. When MWCNTs were used as a filler to introduce conductive pathways throughout the chitosan skeleton, the solubilizing hydrophobic and hydrophilic properties of chitosan established stable polymer/MWCNT solutions that yielded a homogeneous distribution of nanotubes throughout the final composite matrix. A percolation theory threshold of approximately 2.5 wt % MWCNTs was determined by measurement of the conductivity as a function of chitosan/MWCNT ratios. The powder resistivity of completely compressed scaffolds also was measured and was found to be similar for all MWCNT concentrations (0.7-0.15 Omega cm powder resistivity for MWCNTs of 0.8-5 wt %) and almost five times lower than the 20 k Omega cm value found for pure chitosan scaffolds.     

Composite Fiber Spun Mat Synthesis and In Vitro Biocompatibility for Guide Tissue Engineering

Composite scaffolds are commonly used strategies and materials employed to achieve similar analogs of bone tissue. This study aims to fabricate 10% wt polylactic acid (PLA) composite fiber scaffolds by the air-jet spinning technique (AJS) doped with 0.5 or 0.1 g of zirconium oxide nanoparticles (ZrO₂) for guide bone tissue engineering. ZrO₂ nanoparticles were obtained by the hydrothermal method and characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). SEM and fourier-transform infrared spectroscopy (FTIR) analyzed the synthesized PLA/ZrO₂ fiber scaffolds. The in vitro biocompatibility and bioactivity of the PLA/ZrO₂ were studied using human fetal osteoblast cells. Our results showed that the hydrothermal technique allowed ZrO₂ nanoparticles to be obtained. SEM analysis showed that PLA/ZrO₂ composite has a fiber diameter of 395 nm, and the FITR spectra confirmed that the scaffolds’ chemical characteristics are not affected by the synthesized technique. In vitro studies demonstrated that PLA/ZrO₂ scaffolds increased cell adhesion, cellular proliferation, and biomineralization of osteoblasts. In conclusion, the PLA/ZrO₂ scaffolds are bioactive, improve osteoblasts behavior, and can be used in tissue bone engineering applications.     

Preparation and mechanical properties of poly(chitosan‐g‐DL‐lactic acid) fibrous mesh scaffolds

DL ‐lactic acid was grafted onto chitosan to produce poly(chitosan‐g‐DL ‐lactic acid)(PCLA) without using a catalyst. These PCLAs were then spun into filaments and further fabricated into fibrous mesh scaffolds using an improved wet‐spinning technique. The diameter of filaments in different scaffolds could vary from a few micrometers to several tens of micrometers. The scaffolds exhibited various pore sizes ranging from about 20 µm to more than 200 µm and different porosities up to 80%. The several main processing conditions were optimized for obtaining the desired scaffolds with well‐controlled structures. The tensile and compressive mechanical properties of the mesh scaffolds in both dry and hydrated states were mainly examined. Significantly improved tensile strength and modulus, enhanced compressive modulus, and stress as well as the dimensional stability for these mesh scaffolds in their hydrated state were observed. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and characterization of collagen/chitosan poly (ethylene glycol)/nanohydroxyapatite composite scaffolds

Porous three‐dimensional collagen/chitosan scaffolds combined with poly (ethylene glycol) (PEG) and hydroxyapatite were obtained through a freeze‐drying method. Physical cross‐linking was examined by dehydrothermal treatment. The prepared materials were characterized by different analyses, eg, scanning electron microscopy (SEM), measurements of porosity and swelling, mechanical properties, and resistance to enzymatic degradation. The porosity of scaffolds and their swelling ratio decreased with the addition of hydroxyapatite. Moreover, after exposure to collagenase, the collagen/chitosan matrices containing PEG showed much faster degradation rate than matrices with the addition of hydroxyapatite. The results indicated that the addition of hydroxyapatite led to improvement of stiffness. The highest degree of porosity and swelling were demonstrated by collagen/chitosan/PEG matrices without hydroxyapatite.     

Synthesis and electrospinning of ε-polycaprolactone-bioactive glass hybrid biomaterials via a sol-gel process

Strategies of bone tissue engineering and regeneration rely on bioactive scaffolds to mimic the natural extracellular matrix (ECM) as templates onto which cells attach, multiply, migrate, and function. For this purpose, hybrid biomaterials based on smart combinations of biodegradable polymers and bioactive glasses (BGs) are of particular interest, since they exhibit tailored physical, biological, and mechanical properties, as well as predictable degradation behavior. In this study, hybrid biomaterials with different organic-inorganic ratios were successfully synthesized via a sol-gel process. Poly(ε-caprolactone) (PCL) and tertiary bioactive glass (BG) with a glass composition of 70 mol % SiO(2), 26 mol % CaO, and 4 mol % of P(2)O(5) were used as the polymer and inorganic phases, respectively. The polymer chains were successfully introduced into the inorganic sol while the networks were formed. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analyses (TGA), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX) were used to investigate the presence of different chemical groups, structural crystallinity, thermal property, elemental composition, and homogeneity of the synthesized hybrid biomaterials. Identification of chemical groups and the presence of molecular interaction by hydrogen bonding between the organic and inorganic phases was confirmed by FTIR. The XRD patterns showed that all PCL/BG hybrids (up to 60% polymer content) were amorphous. The TGA study revealed that the PCL/BG hybrid biomaterials were thermally stable, and good agreement was observed between the experimental and theoretical organic-inorganic ratios. The SEM/EDX results also revealed a homogeneous elemental distribution and demonstrated the successful incorporation of all the elements in the hybrid system. Finally, these synthesized hybrid biomaterials were successfully electrospun into 3D scaffolds. The resultant fibers have potential use as scaffolds for bone regeneration.     

Morphology and characterization of 3D micro-porous structured chitosan scaffolds for tissue engineering

This research studies the morphology and characterization of three-dimensional (3D) micro-porous structures produced from biodegradable chitosan for use as scaffolds for cells culture. The chitosan 3D micro-porous structures were produced by a simple liquid hardening method, which includes the processes of foaming by mechanical stirring without any chemical foaming agent added, and hardening by NaOH cross linking. The pore size and porosity were controlled with mechanical stirring strength. This study includes the morphology of chitosan scaffolds, the characterization of mechanical properties, water absorption properties and in vitro enzymatic degradation of the 3D micro-porous structures. The results show that chitosan 3D micro-porous structures were successfully produced. Better formation samples were obtained when chitosan concentration is at 1–3%, and concentration of NaOH is at 5%. Faster stirring rate would produce samples of smaller pore diameter, but when rotation speed reaches 4000 rpm and higher the changes in pore size is minimal. Water absorption would reduce along with the decrease of chitosan scaffolds’ pore diameter. From stress–strain analysis, chitosan scaffolds’ mechanical properties are improved when it has smaller pore diameter. From in vitro enzymatic degradation results, it shows that the disintegration rate of chitosan scaffolds would increase along with the processing time increase, but approaching equilibrium when the disintegration rate reaches about 20%.     

Effect of Chemical Modifications of Fibers on Tensile Properties of Epoxy Hybrid Composites

Treatment of oil palm empty fruit bunch (EFB) and jute fibers is carried out by using 2-hydroxy ethyl acrylate (2-HEA) to increase the interfacial bonding of fibers with the epoxy matrix. Fourier transform-infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to measure the change of surface composition of the fibers after treatment. Modified oil palm and jute fibers were used as reinforcements for epoxy matrix to fabricate hybrid composites by the hand lay-up technique. Tensile and morphological properties of hybrid composites were studied, and tensile properties of hybrid composites prepared from chemically treated oil palm/jute fibers were found to be better than those of untreated hybrid composites. SEM micrographs disclose that interfacial bonding between fiber and matrix significantly improved in the hybrid composites. Developed hybrid composites can be exploited as alternative materials for development of automotive and structural components instead of synthetic fiber–reinforced polymer composites.     

Chemical characterization and ultrastructure study of pulp fibers

Understanding the ultrastructure and chemical characterization of pulp fibers is highly important in utilizing wood as a raw material in a wide scope of applications, such as forest biomass-based biorefineries and low-cost renewable materials. The observation of the ultrastructure is not possible without advanced microscopy and spectroscopy techniques. Therefore, this study focuses on exploring the ultrastructure of pulp fibers with helium ion microscopy (HIM) and scanning electron microscopy (SEM). For the analysis of chemical characterization in the pulp fibers, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) were performed. For these studies, the pulp fiber samples were obtained mainly from three different wood species, i.e. spruce, birch and eucalyptus. They were received in the never dried state and dried with a critical point drier (CPD) to minimize pore collapse. The spectroscopy results showed a strong signal from crystalline cellulose and confirmed the absence of lignin after Kraft pulping and bleaching. However, with XPS about 2% of lignin was detected in eucalyptus pulp. The results obtained with the microscopy techniques are compared and indicating the nanofibril size, shape, surface roughness as well as their orientation in pulp fibers. To our knowledge, this is the first time that HIM is applied to study the ultrastructure of pulp fibers and compared against more conventional microscopy and spectroscopy techniques. The main differences between HIM and SEM were found to be related to the focusing and magnification. The individual nano- and microfibrils as well as their bundles were more easily visible with HIM than with SEM. Also, with HIM it was possible to get the total area in focus at once which was not the case with SEM. The increased understanding of the ultrastructure and chemical composition of wood pulp enhance the development of novel wood-based products and processes for their manufacture.     

The Effects of Demineralization Process on Diameter,Tensile Properties and Biodegradation of Chitosan Fiber

Chitosan fiber is one of the potential fibers that can be used as absorbable monofilament suture in biomedical application. In chitosan synthesis, aside from deproteination and deacetylation, demineralization is a crucial step where the major minerals within crustacean shells are removed. This demineralization process is carried out with two parameters, i.e. time and temperature. This research studies the influence of demineralization time on the diameter, tensile properties and biodegradability of chitosan fibers. Chitosan was synthesized from shrimp shells using 1 × 2 h and 3 × 2 h demineralization process. Chitosan fibers were produced by means of wet spinning. The chemical properties of chitosan fibers were characterized by means of Fourier Transform Infrared (FTIR) spectroscopy and X-Ray Diffractometry (XRD) technique. Physical properties characterization was carried out to measure the fibers’ diameter, density and viscosity. Tensile properties were evaluated by means of tensile test. The results were compared to standard of absorbable suture from the United States Pharmacopoeia (USP). Furthermore, in vitro degradation testing was also performed for analyzing biodegradation properties. Chitosan fibers were successfully made with diameter and maximum tensile force of chitosan fibers in a range of 364 - 460 μm and 5.6 - 8.3 N, respectively. The results of this research pointed that adding demineralization time would increase the diameter of chitosan fiber. However, the degradation occurred in prolonged demineralization process broke the bonds within the fiber which lead to a decrease in fiber's density. It is due to the degradation of chitosan occurred during extended demineralization process, which leads to degree of crystallinity reduction. Extensive demineralization process has been found to lower fibers’ tensile strength from 80.4 MPa to 38.4 MPa (52.2%), but increase their biodegradability by 17% and maximum elongation from 6.9% to 16.2% (136%). Despite that extensive demineralization process lowered chitosan fiber's tensile strength, both fibers made could still fit the standard for synthetic absorbable suture from USP number 0 and 1.     

In vitro biocompatibility of electrospun hexanoyl chitosan fibrous scaffolds towards human keratinocytes and fibroblasts

With the ability to form a submicron-sized fibrous structure with interconnected pores mimicking the extracellular matrix (ECM) for tissue formation, electrospinning was used to fabricate ultra-fine fiber mats of hexanoyl chitosan (H-chitosan) for potential use as skin tissue scaffolds. In the present communication, the in vitro biocompatibility of the electrospun fiber mats was evaluated. Indirect cytotoxicity evaluation of the fiber mats with mouse fibroblasts (L929) revealed that the materials were non-toxic and did not release substances harmful to living cells. The potential for use of the fiber mats as skin tissue scaffolds was further assessed in terms of the attachment and the proliferation of human keratinocytes (HaCaT) and human foreskin fibroblasts (HFF) that were seeded or cultured on the scaffolds at different times. The results showed that the electrospun fibrous scaffolds could support the attachment and the proliferation of both types of cells, especially for HaCaT. In addition, the cells cultured on the fibrous scaffolds exhibited normal cell shapes and integrated well with surrounding fibers. The obtained results confirmed the potential for use of the electrospun H-chitosan fiber mats as scaffolds for skin tissue engineering.     

HPMC crosslinked chitosan/hydroxyapatite scaffolds containing Lemongrass oil for potential bone tissue engineering applications

The chitosan (CS), hydroxypropyl methyl cellulose (HPMC), hydroxyapatite (HAp and Lemon grass oil (LGO) based scaffolds was prepared by freeze gelation method. The composite formation was confirmed by FTIR (Fourier-transform infrared spectroscopy) analysis and surface morphology was evaluated by SEM (Scanning Electron Microscopy) analysis. The mechanical strength, biodegradation, swelling, porosity and antibacterial activity were evaluated on the basis of LGO contents. The scaffold structure was porous and the mechanical strength was enhanced as a function of LGO contents. The scaffold properties analysis revealed the biodegradation nature and swelling behavior of CS-HPMC-HAp-LGO was also affected significantly as a function of LGO contents. The cytotoxicity of CS-HPMC-HAp-LGO was studied against MC3T3-E1 cells and based on cell viability, no toxic sign was observed. The antimicrobial activity was evaluated against S. aureus and CS-HPMC-HAp-LGO scaffolds showed promising activity, which was varied as a function of LGO contents. The findings revealed that the CS-HPMC-HAp-LGO are biocompatible and have potential for bone tissue engineering.     

PDMS 2D optical lens integrated with microfluidic channels: principle and characterization

In this paper, the fabrication and characterization of PDMS 2D-optical lenses are reported. These lenses are designed in order to improve the performance of fluorescent spectroscopy detection performed on a portable chip using optical fibers. The fabrication process of the PDMS layer is first detailed, and the patterns are then checked with a SEM. By comparing various interfacial structures, it is shown that the beam properties of the light coming out from the fiber can be modified depending on the lens curvature radius. As a consequence, for a constant dye concentration, the use of such lenses can increase the intensity of fluorescent response close to the fiber or far from the fiber, compared to the same design with a flat interface. This excitation improvement corresponding to a stronger response from the dye then consequently leads to around three times higher sensitivity of the on-chip detection method for fluorescent spectroscopy.     

壳聚糖/聚乙烯醇共混超细纤维的制备及紫外光交联研究

用静电纺丝法制备壳聚糖/聚乙烯醇的共混超细纤维,采用扫描电镜考察了纺丝液浓度、共混物配比、喷丝口内径对纤维形貌的影响.此外,为减少壳聚糖/聚乙烯醇纤维膜的溶胀变形,在上述体系中加入可光交联的单体二缩三乙二醇双甲基丙烯酸酯(TEGDMA)、引发剂2-羟基-2-甲基-1苯基丙酮(1173),对电纺纤维进行紫外光交联.结果表明,当壳聚糖与聚乙烯醇质量比为8:2的共混体系中加入占混合溶液质量分数4%的TEGDMA、0.12%的1173作为交联剂时,所得的无纺布纤维直径比较均一,平均约为200 nm,经光交联处理后其耐水性能得到提高.     

Electrospun poly(ethylene oxide)/chitosan nanofibers with cellulose nanocrystals as support for cell culture of 3T3 fibroblasts

Chitosan/poly(ethylene oxide) (PEO) (5:1) nanofibers with cellulose nanocrystals (CNCs) were produced using an electrospinning technique. The addition of CNCs to the chitosan/PEO solutions allowed the production of uniform fibers (without beads) with a high proportion of chitosan. The fiber diameters were influenced by the concentration of CNCs in the chitosan/PEO solutions. The solutions containing 10% (w/w) of CNCs produced thinner fibers compared to solutions containing 5% (w/w) of CNCs. Thermogravimetric analysis indicated that the nanofibers were thermally stable, despite the CNCs having an effect on the PEO decomposition. Results from the cell assay in cultures of 3T3 fibroblasts indicated that the chitosan/PEO nanofibers (with 10% CNCs) promoted cell attachment with changes in the cytoskeletal organization. The results obtained in this work highlight the favorable effect of CNCs in electrospinning of chitosan/PEO. As expected, the influence of nanofibers on 3T3 fibroblasts F-actin and β-tubulin network revealed alterations in cytoskeleton, leading to changes in cell morphology and spreading.     

Banana fiber-reinforced biodegradable soy protein composites

Banana fiber, a waste product of banana cultivation, has been used to prepare banana fiber reinforced soy protein composites. Alkali modified banana fibers were characterized in terms of density, denier and crystallinity index. Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) were also performed on the fibers. Soy protein composites were prepared by incorporating different volume fractions of alkali-treated and untreated fibers into soy protein isolate (SPI) with different amounts of glycerol (25%–50%) as plasticizer. Composites thus prepared were characterized in terms of mechanical properties, SEM and water resistance. The results indicate that at 0.3 volume fraction, tensile strength and modulus of alkali treated fiber reinforced soy protein composites increased to 82% and 963%, respectively, compared to soy protein film without fibers. Water resistance of the composites increased significantly with the addition of glutaraldehyde which acts as cross-linking agent. Biodegradability of the composites has also been tested in the contaminated environment and the composites were found to be 100% biodegradable.     

Preparation and characterization of new materials based on silk fibroin,chitosan and nanohydroxyapatite

Abstract

In this paper, a series of porous nanohydroxyapatite/silk fibroin/chitosan (nHA/SF/CTS) scaffolds were successfully prepared using the freeze-drying method. The biomaterials were characterized by attenuated total reflection Fourier transform infrared spectroscopy, and mechanical testing and thermogravimetric analysis. Moreover, studies of porosity, pore size, swelling properties and in vitro degradation test were performed. Research has proved that micro-structure, porosity, water adsorption and compressive strength were greatly affected by the components’ concentration, in particular the content of silk fibroin. SEM observations showed that the scaffolds of nHA/SF/CTS are highly porous, with pore size in wide range from 25 to 300?µm which is suitable for cell growth. nHA/SF/CTS scaffolds have sufficient mechanical integrity to resist handling during implantation and in vivo loading. Both, the compressive modulus and compressive strength of the scaffold, decrease with the increase in silk fibroin content.     

Effectiveness of silane monomer and gamma radiation on chitosan films and PCL-based composites

Chitosan films were prepared by casting from its 1% (w/w) solution. Tensile strength (TS) and tensile modulus (TM) of chitosan films were found to be 30 MPa and 450 MPa, respectively. Silane monomer (3-aminopropyl tri-methoxysilane) (0.25%, w/w) was added into the chitosan solution (1%, w/w) and films were casted. Then films were exposed to gamma radiation (5–25 kGy) and mechanical properties were investigated. It was found that at 10 kGy, the values of TS and TM were improved significantly. Silane grafted chitosan film reinforced poly(caprolactone) (PCL)-based tri-layer composites were prepared by compression molding. Silane improved interfacial adhesion between chitosan and PCL in composites. Surface of the films was investigated by scanning electron microscope (SEM) and found better morphology for silane grafted films.