Fabrication of novel supramolecular hydrogels with high mechanical strength and adjustable thermosensitivity

An effective strategy was developed to fabricate the supramolecular hydrogels with high mechanical strength and adjustable thermosensitivity in aqueous systems, in which physical hydrogel precursors were first formed by the inclusion complexation of Pluronic F68/poly(epsilon-caprolactone) block copolymer end-capped with acryloyl groups with alpha-cyclodextrin (alpha-CD) and subsequently in situ UV photo-cross-linking was carried out. In this way, strong supramolecular hydrogels with elastic moduli greater than 100 000 Pa could be created, which is an order of magnitude higher than that previously achieved with related supramolecular hydrogels. Moreover, the stimuli-responsive property of these hydrogels could be tailored by changing the molar feed ratio of alpha-CD to the macromer. By X-ray diffraction and thermogravimetric analyses, the polypseudorotaxane structure of the inclusion complexes in as-obtained hydrogels was confirmed.     

Effect of guest hydrophobicity on water sorption behavior of oligomer/alpha-cyclodextrin inclusion complexes

Cyclomaltohexaose (alpha-cyclodextrin, alpha-CD) can form inclusion complexes (ICs) with polymer molecules in the columnar crystal structure in which alpha-CD molecules stack to form a molecular tube. Complementary water vapor sorption and wide-angle X-ray diffractomery (WAXD) were performed on oligomer/alpha-CD ICs to determine their structures and stabilities. To discern the effect of guest molecule hydrophobicity on water adsorption isotherms, polyethylene glycol (PEG, MW = 600 g/mol) and hexatriacontane (HTC) guests were used. Sorption isotherms for PEG/alpha-CD IC are similar to those obtained for pure alpha-CD and PEG, suggesting the presence of dethreaded PEG in the sample. WAXD collected before and after water vapor sorption of PEG/alpha-CD IC indicated a partial conversion from columnar to cage crystal structure, the thermodynamically preferred structure for pure alpha-CD, due to dethreading of PEG. This behavior does not occur for HTC/alpha-CD IC. Sorption isotherms collected at 20, 30, 40, and 50 degrees C allowed the calculation of the isosteric heats of adsorption and the integral entropies of adsorbed water which are characterized by minima that indicate the monolayer concentration of water in the ICs.     

Preparation and characterization of polypseudorotaxanes based on block-selected inclusion complexation between poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) triblock copolymers and alpha-cyclodextrin

A series of new polypseudorotaxanes were synthesized in high yields when the middle poly(ethylene oxide) (PEO) block of poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEO-PPO) triblock copolymers was selectively recognized and included by alpha-cyclodextrin (alpha-CD) to form crystalline inclusion complexes (ICs), although the middle PEO block was flanked by two thicker PPO blocks, and a PPO chain had been previously thought to be impenetrable to alpha-CD. X-ray diffraction studies demonstrated that the IC domains of the polypseudorotaxanes assumed a channel-type structure similar to the necklace-like ICs formed by alpha-CD and PEO homopolymers. Solid-state CP/MAS (13)C NMR studies showed that the alpha-CD molecules in the polypseudorotaxanes adopted a symmetrical conformation due to the formation of ICs. The compositions and stoichiometry of the polypseudorotaxanes were studied using (1)H NMR, and a 2:1 (ethylene oxide unit to alpha-CD) stoichiometry was found for all polypseudorotaxanes although the PPO-PEO-PPO triblock copolymers had different compositions and block lengths, suggesting that only the PEO block was closely included by alpha-CD molecules, whereas the PPO blocks were uncovered. The hypothesis was further supported by the differential scanning calorimetry (DSC) studies of the polypseudorotaxanes. The glass transitions of the PPO blocks in the polypseudorotaxanes were clearly observed because they were uncovered by alpha-CD and remained amorphous, whereas the glass-transition temperatures increased, because the molecular motion of the PPO blocks was restricted by the hard crystalline phases of the IC domains formed by alpha-CD and the PEO blocks. The thermogravimetric analysis (TGA) revealed that the polypseudorotaxanes had better thermal stability than their free components due to the inclusion complexation. Finally, the kinetics of the threading process of alpha-CD onto the copolymers was also studied. The findings reported in this article suggested interesting possibilities in designing other cyclodextrin ICs and polypseudorotaxanes with block structures.     

Supramolecular hydrogels induced rapidly by inclusion complexation of poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) block copolymers with alpha-cyclodextrin in aqueous solutions

On the basis of the synthesis of water-soluble poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL) block copolymers, the supramolecular hydrogels were fabricated rapidly in aqueous solutions by their inclusion complexation with alpha-cyclodextrin. X-ray diffraction (XRD) analyses confirmed the supramolecular self-assemblies of alpha-cyclodextrin threaded onto amphiphilic PCL-PEG-PCL block copolymers. The resulting hydrogels display a high degree of elasticity, with the storage modulus (G') greater than the loss modulus (G') over the entire range of frequency. Moreover, their viscosity greatly diminished as they were sheared. By controlling the molecular weight of the PEG component in the block copolymers and the content of the block copolymer, their rheological properties could be modulated. Such hydrogel materials have the potential to be used as tissue engineered scaffolds, biosensors in the human body, and carriers for controlled drug delivery.     

Two-phase channel structures based on alpha-cyclodextrin-polyethylene glycol inclusion complexes

Wide-angle X-ray scattering observations of alpha-cyclodextrin (CD)-poly(ethylene glycol) (PEG) inclusion complexes (ICs) have shown for the first time that two crystalline columnar modifications (forms I and II) are produced in the process of their formation. This was made possible by precise azimuthal X-ray diffraction scanning of oriented IC samples. Form I is characterized by CDs threaded onto PEG chains and arranged along channels in the order head-to-head/tail-to-tail, while form II is formed by unbound CDs also arranged into columns in a head-to-tail and also possibly a head-to-head/tail-to-tail manner, probably as a result of template crystallization on the form I IC crystals. It was shown that similar structural peculiarities are inherent for channel structures based on ICs obtained with PEG with a wide range of molecular weights (MWs). The characteristic feature of ICs based on PEG, especially with MW > 8000, is the presence of unbound polymer in the composition of the complex. The amount of unbound PEG was shown to rise with increasing MW of PEG, resulting in greater imperfections in the IC crystalline structure. The polyblock structure of ICs based on alpha-CD and PEG was therefore proposed.     

A Supramolecular Hydrogel Based on Polyglycerol Dendrimer‐Specific Amino Group Recognition

Dendrimer‐based supramolecular hydrogels have gained attention in biomedical fields. While biocompatible dendrimers were used to prepare hydrogels via physical and/or chemical crosslinking, smart functions such as pH and molecular control remain undeveloped. Here, we present polyglycerol dendrimer‐based supramolecular hydrogel formation induced by a specific interaction between the polyglycerol dendrimer and an amino group of glycol chitosan. Gelation was achieved by mixing the two aqueous solutions. Hydrogel formation was controlled by varying the polyglycerol dendrimer generation. The hydrogel showed pH‐dependent swelling; strongly acidic conditions induced degradation via dissociation of the specific interaction. It also showed unique l ‐arginine‐responsive degradation capability due to competitive exchange of the amino groups of glycol chitosan and l ‐arginine. These polyglycerol dendrimer‐based supramolecular characteristics allow multimodal application in smart biomaterials.     

Supramolecular and biomimetic polypseudorotaxane/glycopolymer biohybrids: synthesis, glucose-surfaced nanoparticles, and recognition with lectin

A new class of supramolecular and biomimetic glycopolymer/poly(epsilon-caprolactone)-based polypseudorotaxane/glycopolymer triblock copolymers (poly(D-gluconamidoethyl methacrylate)-PPR-poly(D-gluconamidoethyl methacrylate), PGAMA-PPR-PGAMA), exhibiting controlled molecular weights and low polydispersities, was synthesized by the combination of ring-opening polymerization of epsilon-caprolactone, supramolecular inclusion reaction, and direct atom transfer radical polymerization (ATRP) of unprotected D-gluconamidoethyl methacrylate (GAMA) glycomonomer. The PPR macroinitiator for ATRP was prepared by the inclusion complexation of biodegradable poly(epsilon-caprolactone) (PCL) with alpha-cyclodextrin (alpha-CD), in which the crystalline PCL segments were included into the hydrophobic alpha-CD cavities and their crystallization was completely suppressed. Moreover, the self-assembled aggregates from these triblock copolymers have a hydrophilic glycopolymer shell and an oligosaccharide threaded polypseudorotaxane core, which changed from spherical micelles to vesicles with the decreasing weight fraction of glycopolymer segments. Furthermore, it was demonstrated that these triblock copolymers had specific biomolecular recognition with concanavalin A (Con A) in comparison with bovine serum albumin (BSA). To the best of our knowledge, this is the first report that describes the synthesis of supramolecular and biomimetic polypseudorotaxane/glycopolymer biohybrids and the fabrication of glucose-shelled and oligosaccharide-threaded polypseudorotaxane-cored aggregates. This hopefully provides a platform for targeted drug delivery and for studying the biomolecular recognition between sugar and lectin.     

Rotaxanes and pseudorotaxanes with Fe-, Pd- and Pt-containing axles. Molecular motion in the solid state and aggregation in solution

This article reviews our recent studies on structure and properties of rotaxanes and pseudorotaxanes with Fe-, Pd- and Pt-containing complexes as the axle component. Electrochemical oxidation of ferrocenylmethylamine in the presence of a hydrogen radical precursor induces formal protonation of the amino group and produces a pseudorotaxane of the resulting ammonium species with a crown ether. Single crystals of the ferrocene-containing pseudorotaxane undergo a thermal crystalline phase transition accompanied by changes in the optical properties of the crystals. X-Ray crystallographic studies of the low- and high-temperature phases revealed different intermolecular interactions and orientations of the aromatic rings in the crystalline state depending on the temperature. End-capping of the ferrocene-containing [2]pseudorotaxane using a cross-metathesis reaction yields [2]rotaxane under mild conditions. A rotaxane having a platinum-carboxylate complex as its axle is converted into related organic and inorganic rotaxanes by partial dissociation of the Pt-O bond. An N-alkylbipyridinium forms [3]pseudorotaxane with alpha-cyclodextrin (alpha-CD), and it reacts with platinum and palladium complexes to form the corresponding [5]rotaxanes containing four alpha-cyclodextrin moieties. Complexes without alpha-CD components form micelles in aqueous solution, while the addition of alpha-CD causes degradation of the micelles and the formation of rotaxanes.     

Guest-free self-assembly of alpha-cyclodextrins leading to channel-type nanofibrils as mesoporous framework

Guest-free alpha-cyclodextrin self-assembly (alpha-CD-SA) was successfully obtained through a simple treatment such as sonication of alpha-CD in a specific solvent. From wide-angle X-ray diffraction (WAXD), it was found that the crystalline structure of alpha-CD changed upon increasing the treatment time, resulting in alpha-CD-SA in which the alpha-CDs were closely packed in the vertical direction and hexagonally aligned in the horizontal direction (what is called as "channel structure"). In particular, these structures were developed only in tetrahydrofuran (THF) as a specific solvent. In addition, it was found by inclusion experiment and field-emission scanning electron microscopy (FE-SEM) that propionic acid was able to be included into the channel of alpha-CD-SA and that alpha-CD-SA had alpha-CD bundles with a fibril-like shape, respectively. These results demonstrate that the alpha-CD-SA consists of nanofibril-like alpha-CD bundles with cylindrical nanopores open at least at one end, resulting from the dispersion of alpha-CD molecules by sonication in THF and the subsequent re-formation of strong hydrogen bonding between the alpha-CDs with the aid of THF (so-called "slow recrystallization"). Interestingly, it was observed from FE-SEM and nitrogen adsorption-desorption measurement that the alpha-CD-SA had a wormhole-like mesopore with inkbottle shape (average desorption pore size = ca. 25 nm). This mesoporous structure was considered to be attributed to the formation of a mesoporous framework by the disordered aggregation of the nanofibril-like alpha-CD bundles.     

Surface properties of inclusion complexes between alpha-cyclodextrin and poly(ethylene oxide)

The surface properties of the supramolecular inclusion complex (IC) obtained from the threading of alpha-cyclodextrin (alpha-CD) onto poly(ethylene oxide) (PEO) free in solution are studied. The complexes were characterized by IR, (1)H NMR spectroscopy, and thermal analysis. The variation of the interfacial tension, gamma(int), with inclusion complex (IC) concentration and temperature were determined. The results were compared with those found for PEO under the same conditions. alpha-CD does not present surface activity. To quantify the adsorption process of IC and PEO in aqueous medium, the Gibbs equation was used. The driving force for adsorption of IC at the air/aqueous interface seems to arise from an enthalpic contribution. The wettability of the alpha-CD, PEO, and IC films with two liquids was determined by static contact angle measurements. The hydrophobicity degree was estimated. IC is more hydrophobic than PEO and alpha-CD.     

Crystallization on heating and complex phase behavior of alpha-cyclodextrin solutions

Solutions composed of alpha-cyclodextrin (alpha-CD), water, and various methylpyridines, in particular, 4-methylpyridine (4MP), undergo reversible liquid-solid transitions upon heating, the crystalline solid phases undergoing further phase transformations at higher temperatures. This unusual behavior has been characterized by an ensemble of measurements, including solubility, differential scanning calorimetry, quasielastic neutron scattering, as well as x-ray powder diffraction. For the alpha-CD/4MP system five crystalline phases have been identified. The unit cell parameters and corresponding changes with temperature indicate a scenario for the crystallization process. A simple model is proposed that mimics the observed disorder-order transition.     

Multistimuli‐Responsive,Moldable Supramolecular Hydrogels Cross‐Linked by Ultrafast Complexation of Metal Ions and Biopolymers

A new type of multistimuli‐responsive hydrogels cross‐linked by metal ions and biopolymers is reported. By mixing the biopolymer chitosan (CS) with a variety of metal ions at the appropriate pH values, we obtained a series of transparent and stable hydrogels within a few seconds through supramolecular complexation. In particular, the CS–Ag hydrogel was chosen as the model and the gelation mechanism was revealed by various measurements. It was found that the facile association of Ag⁺ ions with amino and hydroxy groups in CS chains promoted rapid gel‐network formation. Interestingly, the CS–Ag hydrogel exhibits sharp phase transitions in response to multiple external stimuli, including pH value, chemical redox reactions, cations, anions, and neutral species. Furthermore, this soft matter showed a remarkable moldability to form shape‐persistent, free‐standing objects by a fast in situ gelation procedure.     

Study on the supramolecular systems of 5-(2-hydroxy phenyl)-10,15,20-tris (4-methoxy phenyl) porphyrin with cyclodextrins

In neutral phosphate buffer solutions of pH 7.4, the inclusive complexation of 5-(2-hydroxy phenyl)-10,15,20-tris(4-methoxy phenyl) porphyrin (o-HTPP) with alpha-cyclodextrin (alpha-CD), beta-CD, heptakis (2,3,6-tri-O-methyl)-beta-CD (TM-beta-CD), SBE-beta-CD, HP-beta-CD and gamma-CD has been examined by means of UV-vis and fluorescence spectroscopy. The formation of inclusion complexes has been confirmed on the base of changes of spectroscopy properties. The o-HTPP forms 1:2 inclusion complexes with TM-beta-CD and 1:1 inclusion complexes with the other five cyclodextrins. The formation constants (K) of o-HTPP for the formation of the inclusion complexes have been estimated from the absorbance and fluorescence intensity changes in neutral phosphate buffer solutions. The K value (2.89x10(7)), which is the formation constant for the formation of the 1:2 inclusion supramolecular, is nearly 10(4) times than those of the 1:1 inclusion complexes. Compared to the other five cyclodextrins, the strongest inclusion ability of TM-beta-CD can be explained that the hydrogen bond plays significant role in the inclusion process. UV-vis experiments also showed that the cavity of TM-beta-CD causes the transform of the state of o-HTPP. In addition (1)H NMR data and 2D-ROSEY NMR spectra support the inclusion conformation of the o-HTPP-CD supramolecular system, indicating the interaction mechanism of inclusion processes.     

Inclusion complex formation between alpha-cyclodextrin and biodegradable aliphatic polyesters

Inclusion complexes (ICs) between alpha-cyclodextrin (alpha-CD) and three kinds of biodegradable aliphatic polyesters with different sequence lengths of the monomeric repeating units poly(3-hydroxypropionate) [P(3HP)], poly(4-hydroxybutyrate) [P(4HB)] and poly(epsilon-caprolactone)(PCL) were prepared by mixing a solution of alpha-CD with that of the polymer, followed by stirring. The ICs were obtained as insoluble precipitates and characterized by FT-IR, WAXD and DSC. All measurements showed that the polymer chains of all three kinds of polyester were included into the alpha-CD cavity and formed ICs with different stoichiometries. WAXD patterns and thermal analysis indicated that these ICs possessed a channel structure and the crystallization of the polyester chains was suppressed upon inclusion into the alpha-CD cavity.     

Face-selective [2]- and [3]rotaxanes: kinetic control of the threading direction of cyclodextrins

New [2]- and [3]pseudorotaxanes containing alpha-cyclodextrin (alpha-CDs) molecules as rotors and alkyl pyridinium derivatives as axles were prepared by a slipping process. The inclusion behavior of these rotaxanes was investigated by using one- and two-dimensional NMR spectroscopy. The methyl group at the 2-position of the pyridinium moiety at the end of each axle molecule was found to control the rates of threading of the alpha-CD onto the axle molecules. alpha-CD can approach axle molecules from a particular direction to form inclusion complexes. Axle molecules that contain a 2-methylpyridinium moiety at one end and a bulky stopper at the other end can regulate the direction of approach to give a [2]pseudorotaxane such as 2 b-alpha-CD. A [3]pseudorotaxane in which two alpha-CD molecules are arranged facing in the same direction at two stations of the tetracationic axle molecule was also obtained. These face-selective behaviors are dominated by kinetic processes rather than thermodynamic processes.     

Effects of solvent,casting temperature,and guest/host stoichiometries on the properties of shape memory material based on partial α‐CD‐PEG inclusion complex

A series of supramolecular inclusion complex (IC) films were formed by threading α‐cyclodextrin (α‐CD) molecules over poly(ethylene glycol) (PEG), according to the designed ratio of α‐CD/PEG. Because of containing α‐CD‐PEG inclusion crystallites as physical crosslinks and uncovered PEG crystallites as “switch phase”, the resulting supramolecular α‐CD‐PEG partial ICs displayed a shape memory effect. The properties of the materials were investigated by ¹H‐NMR, X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and swelling measurement. It was found that the casting temperature, solvent, and the ratio of α‐CD‐PEG inclusion/PEG had great influence on the formation and properties of α‐CD‐PEG partial ICs. The modes of complexes on different conditions were proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 951–957, 2010     

Threading-unthreading equilibrium in solution of molecular nanotubes and linear flexible polymer chains

Using the Flory-Huggins lattice model, we investigate the threading-unthreading equilibrium in a solution of linear flexible polymer chains and molecular nanotubes formed by covalently bonding the ringlike molecules, such as cyclodextrins (CDs). It is found that the threading-unthreading equilibrium depends on the temperature and the molar concentrations of the ringlike molecules and polymer chain segments but is independent of the polymer chain length, which agrees with the experimental observations. By fitting the experimental data of alpha-CD and poly(ethylene glycol) (PEG), the inclusion energy between alpha-CD and PEG, which includes the conformation energy loss of PEG resulted from the inclusion, is calculated to be approximately -20.45 kJ/mol per PEG unit.     

Synthesis of poly(epsilon-lysine)-grafted dextrans and their pH- and thermosensitive hydrogelation with cyclodextrins.

To give pH sensitivity to a thermoreversible supramolecular-structured hydrogel system, poly(epsilon-lysine) (PL), as a cationic polymer, was grafted to dextran and used for inclusion complexation with alpha-cyclodextrins (alpha-CDs). The synthesized graft copolymer was characterized by 1H NMR spectroscopy, and the hydrogel formation was confirmed by X-ray diffraction and solid-state 13C NMR analysis. The hydrogelation was induced from a phase-separated structure of hydrated dextrans and hydrophobically aggregated inclusion complexes in buffer solution at pH 10.0. The prepared hydrogels showed thermoreversible gel-sol transitions as well as pH-sensitive phase transitions, which were recorded by the changes in UV/Vis transmittance. A rapid phase transition from gel to sol was observed upon decreasing the pH value to 4.0, which resulted from the dissociation process between the protonated guest polymer and alpha-CDs. The stimuli-responsive physical properties of the hydrogels were improved by modulating the degree of substitution of the grafted PL and the combination with alpha-CDs.     

Thermodynamic and kinetic characterization of host-guest association between bolaform surfactants and alpha- and beta-cyclodextrins

The thermodynamics and kinetics of formation of host-guest complexes between a series of bolaform surfactants of type C n Me 6 (2+)2Br (-) ( n = 8, 10, and 12) and alpha-cyclodextrin and beta-cyclodextrin were studied with the aid of isothermal titration calorimetry (ITC) at 298.15 and 308.20 K. The association constant, the enthalpy, and the entropy of formation were determined. The obtained thermodynamic parameters are compared with parameters for the micelle formation of a related cationic surfactant. The difference in magnitude and sign between the parameters of the alpha-CD and beta-CD complexes is discussed based on the curvature of the cavity of the CD. We suggest that the water molecules inside the alpha-CD cavity are not able to maintain their hydrogen bond network. Upon complex formation these water molecules are expelled and reform their hydrogen bond network. The situation is different in the larger beta-CD cavity where water has the possibility of a more extensive hydrogen bonding. The kinetics for alpha-CD is slow, associated with high activation energies for both association and dissociation of the complex. The rates increased with a decrease in the number of methylene groups in the hydrocarbon chain. The slow kinetics is argued to originate from the fact that the charged headgroup needs to be pushed through a relative nonpolar cavity. A comparison is made with the Born energy.     

Nitrosation of 2-acetylcyclohexanone. 2. Reaction in water in the absence and presence of cyclodextrins

The kinetic study of the nitrosation of the enol of 2-acetylcyclohexanone (ACHE) has been performed in aqueous acid media in the absence and presence of alpha- and beta-cyclodextrin. The reaction is first-order with respect to both reactants concentration: [nitrite] and [ACHE]; but, unexpectly, the dependence of both [H(+)] or [X(-)] (X(-) = Cl(-), Br(-), or SCN(-)) is not simple first-order. The experimental findings have been explained on the basis of a reaction mechanism that considers the formation of a chelate-nitrosyl complex intermediate in steady-state. Addition of both alpha-cyclodextrin (alpha-CD) or beta-cyclodextrin (beta-CD) diminishs strongly the observed rate constant, k(o), measured either for enol-nitrosation or for enol-ketonization reactions. In the case of beta-CD, the inhibition effect is explained through the formation of nonproductive inclusion complexes between the enol (EH) and beta-CD of 1:1 stoichiometry. Nevertheless, the quantitative interpretation of k(o)-[alpha-CD] profiles requires the assumption that the inclusion complexes formation of both 1:1 (EH/alpha-CD) and 1:2 (EH/alpha-CD(2)) stoichiometries. In the case of enol-ketonization, the EH/alpha-CD complex is nearly as reactive as the uncomplexed enol.