A study on methanol steam reforming to CO2 and H2 over the La2CuO4 nanofiber catalyst

The La₂CuO₄ crystal nanofibers were prepared by using single-walled carbon nanotubes as templates under mild hydrothermal conditions. The steam reforming of methanol (SRM) to CO₂ and H₂ over such nanofiber catalysts was studied. At the low temperature of 150 °C and steam/methanol=1.3, methanol was completely (100%, 13.8 g/h g catalyst) converted to hydrogen and CO₂ without the generation of CO. Within the 60 h catalyst lifespan test, methanol conversion was maintained at 98.6% (13.6 g/h g catalyst) and with 100% CO₂ selectivity. In the meantime, for distinguishing the advantage of nanoscale catalyst, the La₂CuO₄ bulk powder was prepared and tested for the SRM reaction for comparison. Compared with the La₂CuO₄ nanofiber, the bulk powder La₂CuO₄ showed worse catalytic activity for the SRM reaction. The 100% conversion of methanol was achieved at the temperature of 400 °C, with the products being H₂ and CO₂ together with CO. The catalytic activity in terms of methanol conversion dropped to 88.7% (12.2 g/h g catalyst) in 60 h. The reduction temperature for nanofiber La₂CuO₄ was much lower than that for the La₂CuO₄ bulk powder. The nanofibers were of higher specific surface area (105.0 m²/g), metal copper area and copper dispersion. The in situ FTIR and EPR experiments were employed to study the catalysts and catalytic process. In the nanofiber catalyst, there were oxygen vacancies. H₂-reduction resulted in the generation of trapped electrons [e] on the vacancy sites. Over the nanofiber catalyst, the intermediate H₂CO/HCO was stable and was reformed to CO₂ and H₂ by steam rather than being decomposed directly to CO and H₂. Over the bulk counterpart, apart from the direct decomposition of H₂CO/HCO to CO and H₂, the intermediate H₂COO might go through two decomposition ways: H₂COO=CO+H₂O and H₂COO=CO₂+H₂.     

Ti-Si composite oxide-supported cobalt catalysts for CO2 hydrogenation

In the present work, different silica-based supported cobalt (Co) catalysts were synthesized and used for CO2 hydrogenation for methanation. Different supports, such as SSP, MCM-41, TiSSP and TiMCM were used to prepare Co catalysts with 20 wt% Co loading. The supports and catalysts were characterized by means of N2 physisorption, XRD, SEM/EDX, XPS, TPR and CO chemisorption. It is found that after calcination of catalysts, Ti is present in the form of anatase. The introduction of Ti plays important roles in the properties of Co catalysts by:(i) facilitating the reduction of Co oxides species which are strongly interacted with support, (ii) preventing the formation of silicate compounds, and (iii) inhibiting the RWGS reaction. Based on CO2 hydrogenation, the CoTiMCM catalyst exhibites the highest activity and stability.     

On the hydrogenation of CO and CO2 over copper/zirconia and palladium/zirconia catalysts

Summary Zirconia-supported hydrogenation catalysts were obtained by activation of the amorphous precursors Cu₇₀Zr₃₀ and Pd₂₅Zr₇₅ under CO₂ hydrogenation conditions. Catalysts of comparable compositions prepared by co-precipitation and wet impregnation of zirconia with copper- and palladium salts, respectively, served as reference materials. The catalyst surfaces under reaction conditions were investigated by diffuse reflectance FTIR spectroscopy. Carbonates, formate, formaldehyde, methylate and methanol were identified as the pivotal surface species. The appearance and surface concentrations of these species were correlated with the presence of CO₂ and CO as reactant gases, and with the formation of either methane or methanol as reaction products. Two major pathways have been identified from the experimental results. i) The reaction of CO₂/H₂-mixtures on Cu/zirconia and Pd/zirconia primarily yields surface formate, which is hydrogenated to methane without further observable intermediates. ii) The catalytic reaction between CO and hydrogen yields -bonded formaldehyde, which is subsequently reduced to methylate and methanol. Interestingly, there is no observable correlation between absorbed formaldehyde or methylate on the one hand, and gas phase methane on the other hand. The reactants, CO₂ and CO, can be interconverted catalytically by the water gas shift reaction. The influence of the metals on this system of coupled reactions gives rise to different product selectivities in CO₂ hydrogenation reactions. On zirconia-supported palladium catalysts, surface formate is efficiently reduced to methane, which consequently appears to be the principal CO₂ hydrogenation product. In contrast, there is a favorable reaction pathway on copper in which CO is reduced to methanol without C-O bond cleavage; surface formate does not participate significantly in this reaction. In CO₂ hydrogenations on copper/zirconia, methanol can be obtained as the main product, from a sequence of the reverse water gas shift reaction followed by CO reduction.     

红外光谱电化学研究金电极表面上CO2的还原

以碳酸丙烯酯(PrC)为溶剂,高氯酸四丁基胺(TBAP)为电解质,利用电化学及红外光谱电化学开展了金电极上二氧化碳的还原研究。运用现场红外光谱跟踪电化学还原过程反应物及产物的生成和消失。红外光谱电化学循环伏吸法表明,在消耗CO2的同时,金电极上有CO的产生,且伴随有碳酸根的形成。结合电化学和光谱电化学结果,提出了一种电还原机理:在非水介质中,CO2电还原过程中生成了中间体CO2.-,随后CO2.-分别以两个途径进行还原,其一是直接被还原成CO,其二是与CO2结合生成C2O4.-而后歧化成CO以及CO32-。两个反应同时进行,且第一个反应是可逆过程。     

单原子Ge助剂修饰Cu(111)晶面上CO2加氢制甲醇的机理研究

针对CO₂热催化转化制甲醇过程中CO₂吸附、活化较困难及副产物较多的问题,提出采用单原子Ge助剂修饰Cu(111)晶面的解决思路,通过密度泛函理论(DFT)计算研究了CO₂在Ge-Cu(111)晶面上加氢合成甲醇的反应机理。结果表明,单原子Ge助剂的电子调控增加了与其相邻的 Cu 原子的电子云密度,使 CO₂分子在含 Ge 活性界面上的吸附能力显著增强:CO₂在 Ge-Cu(111)晶面上的吸附能约为Cu(111)晶面的1.5倍,约为Pd改性Cu(111)晶面的2.4倍,进而使逆水煤气变换(RWGS)反应路径速控步骤的活化能降低了近 20 kJ·mol^-1,同时衍生出 3条生成甲醇的 RWGS新路径;此外,Ge-Cu(111)晶面上甲酸盐路径由于速控步骤活化能大幅上升而被禁阻,进而CO及烃类等副产物选择性大幅降低,Ge-Cu(111)晶面上CO₂加氢制甲醇选择性升高。     

单原子Ge助剂修饰Cu(111)晶面上CO2加氢制甲醇的机理研究

针对CO₂热催化转化制甲醇过程中CO₂吸附、活化较困难及副产物较多的问题,提出采用单原子Ge助剂修饰Cu (111)晶面的解决思路,通过密度泛函理论(DFT)计算研究了CO₂在Ge-Cu(111)晶面上加氢合成甲醇的反应机理。结果表明,单原子Ge助剂的电子调控增加了与其相邻的Cu原子的电子云密度,使CO₂分子在含Ge活性界面上的吸附能力显著增强：CO₂在Ge-Cu(111)晶面上的吸附能约为Cu (111)晶面的1.5倍,约为Pd改性Cu(111)晶面的2.4倍,进而使逆水煤气变换(RWGS)反应路径速控步骤的活化能降低了近20 kJ·mol^-1,同时衍生出3条生成甲醇的RWGS新路径;此外,Ge-Cu(111)晶面上甲酸盐路径由于速控步骤活化能大幅上升而被禁阻,进而CO及烃类等副产物选择性大幅降低,Ge-Cu(111)晶面上CO₂加氢制甲醇选择性升高。     

Pt/TiO2催化剂上CO氧化反应动力学研究

利用沉积沉淀法制备了Pt/TiO₂催化剂, 将其在不同温度下焙烧, 以得到不同颗粒尺寸的Pt. 并将这些样品用于CO催化氧化反应以及反应动力学研究. 结果表明: 焙烧温度对催化剂有明显影响, Pt 颗粒尺寸随着焙烧温度的升高而增加; 与此同时, CO催化活性随焙烧温度的升高呈先增加后降低的趋势, 其中, 400℃焙烧的样品表现出最高的催化活性. 反应动力学结果表明, 催化剂上CO氧化反应表观速率方程为r=5.4×10^-7p_CO^0.17p_O2^0.36,说明在该催化剂上CO氧化遵循Langmuir-Hinshelwood机理. 同时, 对催化剂进行了CO化学吸附红外光谱和O₂化学吸附表征. 结果表明, 随着焙烧温度的升高, 催化剂上CO和O₂吸附量均呈现先升高后降低的趋势, 这与反应结果和反应动力学方程一致, 说明反应受到催化剂表面上CO和O₂吸附浓度的影响. 而在400℃焙烧的催化剂上, CO和O₂吸附量均最高, 因此其反应活性也最好. 这可能是焙烧过程影响了Pt 和TiO₂之间的相互作用引起的.     

H2-induced CO adsorption and dissociation over Co/Al2O3 catalyst

The activation of adsorbed CO is an important step in CO hydrogenation. The results from TPSR of pre-adsorbed CO with H2 and syngas suggested that the presence of H2 increased the amount of CO adsorption and accelerated CO dissociation. The H2 was adsorbed first, and activated to form H＊ over metal sites, then reacted with carbonaceous species. The oxygen species for CO2 formation in the presence of hydrogen was mostly OH^＊, which reacted with adsorbed CO subsequently via CO^＊＋OH^＊ → CO2^＊＋H^＊; however, the direct CO dissociation was not excluded in CO hydrogenation. The dissociation of C-O bond in the presence of H2 proceeded by a concerted mechanism, which assisted the Boudourd reaction of adsorbed CO on the surface via CO^＊＋2H^＊ → CH^＊＋OH^＊. The formation of the surface species （CH） from adsorbed CO proceeded as indicated with the participation of surface hydrogen, was favored in the initial step of the Fischer-Tropsch synthesis.     

Theoretical study on the reaction mechanism of (CH3)3CO+CO

The reaction mechanism of (CH₃)₃CO with CO has been theoretically investigated using density-functional theory (DFT) calculations at B3LYP/6-31G* level. In order to get more reliable energy values the single-point energy is evaluated at CCSD (T)/6-31++G** level. The results show that the reaction is multi-channel and the reaction of (CH₃)₃CO radical with CO mostly produces (CH₃)₃C + CO₂. The reaction could play a role in eliminating air pollution.     

New process of low-temperature methanol synthesis from CO/CO2/H2 based on dual-catalysis

A new process of low-temperature methanol synthesis from CO/CO₂/H₂ based on dual-catalysis has been developed. Some alcohols, especially 2-alcohol, were found to have high catalytic promoting effect on the synthesis of methanol from CO hydrogenation. At 443 K and 5 MPa, the synthesis of methanol could process high effectively, resulting from the synergic catalysis of Cu/ZnO solid catalyst and 2-alcohol solvent catalyst. The primary results showed that when 2-butanol was used as reaction solvent, the one-pass average yield and the selectivity of methanol, in 40 h continuous reaction at temperature as low as 443 K and 5 MPa, were high up to 46.51% and 98.94% respectively. The catalytic activity was stable and the reaction temperature was 80 K or so lower than that in current industry synthesis process. This new process hopefully will become a practical method for methanol synthesis at low temperature.     

Pt/MOx(M=Ni,Fe,Co,Ce)催化剂上CO氧化反应中抗H2O与CO2的性能研究

我们研究了4种负载型Pt催化剂（1Pt/NiO、1Pt/FeO_x、1Pt/Co₃O₄和Pt/CeO₂）上不同反应条件下CO氧化活性及抗H₂O和CO₂性能.发现反应气氛中CO₂的加入与CO形成了竞争吸附,并在催化剂表面形成了碳酸盐物种堵塞了活性位,从而导致催化剂失活.反应气氛中H₂O的加入对1Pt/CeO₂催化剂的活性有所抑制,但对1Pt/FeO_x、1Pt/NiO和1Pt/Co₃O₄催化剂的活性却有促进作用.在1Pt/FeO_x和1Pt/CeO₂催化剂上的分步反应实验和动力学研究表明,尽管H₂O的加入在两种催化剂上均与CO形成了竞争吸附,但在1Pt/FeO_x催化剂上H₂O在载体表面解离形成的羟基更易与CO反应,开辟了新的反应途径,从而提高了反应性能.此外,H₂O的加入能有效分解该催化剂上的碳酸盐物种,从而保持了其稳定性.     

基于密度泛函理论对等离子体中H/CO2相互作用的第一性原理研究

深入理解辐照条件下氢同位素与CO₂反应的微观机制,可为聚变堆氘氚燃料循环工艺的优化设计提供数据支撑。基于此,采用第一性原理计算研究了等离子体放电条件下H₂和CO₂的微观反应机制,研究了不同温度和氢同位素效应对反应过程的影响。通过内禀反应坐标（IRC）算法结合反应过渡态获得4条初始反应路径,并对比研究了生成产物CH₄及CH₃OH的2条路径在热力学上的容易程度,以及不同氢同位素对各个反应的影响。研究发现,氚的自发衰变或等离子体中的高能电子都会诱导氢同位素与CO₂发生反应,形成CO、H₂O、CH₄及CH₃OH等产物;在高能电子诱导CO₂的离解后,由4条初始反应路径组成的复杂反应可以自持发生,且该复杂反应中存在2种倾向;升高反应温度对CO₂转化为有机物（CH₄和CH₃OH）具有一定的促进作用。     

Syngas production in a novel perovskite membrane reactor with co-feed of CO2

Partial oxidation of methane（POM） co-fed with CO₂ to syngas in a novel catalytic BaCo_0.6Fe_0.2Ta_0.2O_3-δ oxygen permeable membrane reactor was successfully reported.Adding CO₂ to the partial oxidation of methane reaction not only alters the ratio of CO/H₂,but also increases the oxygen permeation flux and CH₄ conversion.Around 96%CH₄ conversion with more than 93%CO₂ conversion and 100%CO selectivity is achieved,which shows an excellent reaction performance.A steady oxygen permeation flux of 15 mL/（cm² min） is obtained during the 100-h operation,which shows good stability as well.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO_2负载型催化剂,并将其用于CO2加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%(质量百分数)时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO2的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

CO Hydrogenation over Re-Co Bimetallic Catalysts Supported over SiO2, Al2O3 and NaY Zeolite

The promotion of rhenium on the reduction of Co²⁺ ions in cobalt based samples prepared by various methods, such as, sol/gel technique, incipient wetness impregnationof Al₂O₃ and NaY, has been investigated in the CO hydrogenation. Among the samples the reducibility of the sol/gel, Re-Co/Al₂O₃ and Re-Co/NaY(IM) were the highest compared to Re-Co/NaY (IE) [8]. In addition to facilitating reduction of Co²⁺ ions, the rhenium increased the rate of reaction and the formation ofC₅₊ hydrocarbons at 10 bar pressures. The samples pretreated in various manner, revealed an about five fold increase in activity and an increase in the chain length in the NaYsupported sample while the activity and selectivity changed in various way in the sol/gel prepared samples. Simultaneously, rhenium increased the amount of olefins of low carbon numbers.In the mechanism the rhenium provides an action preventing fast deactivation of cobalt.     

CrOx/SiO2催化剂上丙烷在CO2气氛中脱氢反应的研究

采用XRD、UV-vis DRS、ESR和微分吸附量热等技术,考察了铬担载量分别为2.5、5和10wt%的CrO_x/SiO₂催化剂的结构、表面性质和氧化还原性能。结果表明,催化剂表面上存在多种Cr的氧化态和聚集形式。随着Cr担载量从2.5wt%到10wt%的逐渐增大,催化剂表面占主导地位的Cr物种由CrO₃单体转为多聚CrO₃和Cr₂O₃晶相。在CO₂气氛中催化剂对丙烷转化率和丙烯选择性的大小顺序为2.5wt%CrO_x/SiO₂>5wt%CrO_x/SiO₂>10wt%CrO_x/SiO₂,反应过程中的原位ESR和UV-visDRS测定结果表明,催化剂表面的反应活性中心为Cr⁵⁺,Cr⁵⁺可由催化剂预处理过程中Cr³⁺的氧化及丙烷反应过程中CrO₃单体的还原产生,在反应中CO₂可使Cr³⁺重新氧化为Cr⁵⁺.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO₂负载型催化剂,并将其用于CO₂加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%（质量百分数）时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO₂的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

Mo_2C/γ-Al_2O_3催化剂上苯加氢反应的原位红外光谱研究

采用程序升温反应法制备了钝化态、还原钝化态和新鲜态Mo2C/γ-Al2O3催化剂,结合原位红外光谱表征技术和反应性能评价,考察、比较了三种催化剂苯加氢反应活性.原位红外光谱结果表明,新鲜态Mo2C/γ-Al2O3催化剂在室温就显示了较好的苯加氢反应活性,表现了类贵金属的催化活性.CO吸附在反应前后新鲜态Mo2C/γ-Al2O3催化剂上的对比结果表明,低价态的Mo位(Moδ+(0δ2))是苯加氢反应活性中心.三种催化剂的反应活性结果表明,新鲜态Mo2C/γ-Al2O3催化剂反应活性最好,催化剂寿命最长,失活之后在500°C下H2处理即可恢复原有活性.     

Effect of conversion of NO2 into no on the catalytic reduction of NO2 with C3H6 in excess O2

During the reduction of NO₂ by C₃H₆ in O₂ over alumina-supported Au, Rh and Pt it was found that three parallel reactions take place,i.e., reduction of NO₂ to N₂ and N₂O, partial decomposition of NO₂ to NO and oxidation of C₃H₆ to CO and CO₂. In the absence of C₃H₆, the NO₂→NO+O₂ reaction reaches a fast equilibrium on Rh and Pt but not on Au and γ-Al₂O₃. Addition of C₃H₆ to the NO₂+O₂ mixture leads to the formation of NO above equilibrium conversion levels.     

CO2 reforming of methane over zirconia-supported nickel catalysts, II. Thermogravimetric analysis

Thermogravimetric analysis has been used to study carbon deposition during the CO₂ reforming of methane over Ni/ZrO₂ catalysts. The carbon deposits form on the reduced catalyst at a very fast rate during temperature-programmed surface reaction of reforming, and reach a steady state below 973 K. So, the amount of deposited carbon remains constant on the catalyst during the reaction at 973 K. A relationship between the amount of deposited carbon and the activity reveals that the initially formed carbon acts as a reaction intermediate and reacts with CO₂ to produce CO.