The non-isothermal elastic dumbbell: A model for the thermal conductivity of a polymer solution

In a flowing polymeric liquid, molecular orientation will give rise to anisotropic conduction of heat. In this paper, a theory is presented relating the thermal conductivity tensor to the deformation history of the fluid. The basis of this theory is formed by the Hookean dumbbell. It is shown that the anisotropy of the thermal conductivity is proportional to the polymer contribution to the extra-stress tensor. This stress-thermal law makes it relatively simple to incorporate anisotropic heat conduction into the numerical simulation of a flowing polymeric liquid.     

A network theory for the thermal conductivity of an amorphous polymeric material

A model to relate the thermal conductivity tensor to the deformation of an amorphous polymeric material above the glass transition temperature is presented. The basis of the model is formed by the transient network theory for polymer melts. With this theory it is possible to calculate the average orientation of the macromolecular segments as a function of the history of the deformation. Combined with an expression which relates the thermal conductivity to the orientation of the molecules, this provides us with the information needed to calculate the heat conduction tensor. Despite the fact that the simplest possible network model is chosen, there is good agreement with the sparse, experimental results.     

Analysis of Taylor vortex flow by means of laser light scattering

Rheological measurements and light-scattering experiments were performed on dilute solutions of high molecular polystyrene. We are able to describe the orientation behavior of chain molecules under shear flow by means of light-scattering. Beyond that these investigations of light-scattering of flowing polymer solutions are an useful and suitable tool for detection and characterization of Taylor vortex formation. We can estimate the appearance of these hydrodynamic instabilities, which overlay the laminar main flow and we can observe a typical influence of the solvent power on it.Presented in part at the meeting of the Deutsche Rheologische Gesellschaft, Berlin, 13–15 May, 1991.     

New methods of determination of the molar weight distribution from rheological measurements

By assuming simplified hypotheses which result from the molecular analysis of Doi-Edwards, it is possible to propose rheological methods for characterizing molar weight distribution of entangled polymeric liquids. The generalized exponential distribution is especially concerned. Theoretical expressions of rheological parameters are derived, and their numerical values are calculated in special cases. A numerical method of discrimination and identification of these special distributions is proposed.     

Elastic recovery and polymer-polymer interactions

i) Elastic recovery in polymeric liquids is a cooperative phenomenon in the sense that individual polymer molecules undergoing retraction must interact with one another in order to generate recovery. Stress generated by polymer molecules under an externally imposed flow field may or may not be a cooperative phenomenon. We suggest that the ability to describe the large elastic recovery exhibited by many polymeric liquids furnishes a crucial test of the validity of methods used to model the interaction of a given polymer molecule with its neighbors. Temporary-junction network models appear to be capable of explaining observed recoveries. Elastic recovery cannot be explained by single-molecule-in-a-mean-field theories which involve no calculation of the effect of the single molecule on the mean field. ii) A Gaussian network theory equation for the change of volume with elongation for a cross-linked elastomer is generalized in order to allow the bulk compliance to depend on elongation. iii) It is proved that two classes of flow history, namely shear-free and shear, are constitutively independent in the sense that, for a given viscoelastic liquid of unknown constitutive equation, the behavior in one class cannot be predicted from rheological measurements (however extensive) made solely in the other class.Dedicated to Prof. Dr. J. Meissner on the occasion of his 60th birthday.     

Anisotropic conduction of heat in a flowing polymeric material

In this paper a theory is presented which relates the thermal conductivity tensor of an amorphous polymeric material to the history of deformation of the material. The basis of the theory is formed by the network theory for polymeric materials. It will be shown that the results obtained here are in good agreement with experimental results on rubber. The effect of anisotropic heat conduction on the flow of a polymeric material will be demonstrated by the simple example of viscous heating in shear flow.Presented at the Golden Jubilee Conference of the British Society of Rheology and Third European Rheology Conference, Edinburgh, 3–7 September, 1990.     

Ultrasonic investigation of interpenetrating networks of poly(methyl methacrylate) and polyurethane

Interpenetrating networks are the most recent development in polymeric blend materials. Due to the crosslinking of both the continuous and dispersed phases, a high degree of molecular mixing is achieved in these materials. Notwith-standing that poly(methyl methacrylate)-polyurethane (PMMA-PUR) interpene-trating and semi-interpenetrating networks have been extensively investigated by Meyer et al., ultrasonic relaxation technique has been applied here for the first time. These materials were found to be highly ultrasound absorbing.It is observed that ultrasonic absorption has a peak at a particular composition of PMMA-PUR interpenetrating network. The absorption coefficient increases with frequencyf. The absorption is of relaxational nature and is not due to the scattering of ultrasonic waves by the domains of the dispersed phase. At every composition of the interpenetrating network, the/f ² vs.f curve indicates the presence of a relaxation frequency below 2 MHz and that the absorption increases with the temperature at some compositions which indicates the presence of thermal relaxation. An attempt is made to relate the absorption with the relaxation of pendent groups of polyurethane in the continuous phase.     

The effect of dissolved polymers on the rheological properties of coating colours

Coating colours used for the coating of paper and board consist mainly of a mineral pigment, which is very often clay, a synthetic binder such as a styrenebutadiene latex, dispersion agents and water retention aids. The latter are often water soluble polymers. These polymers have a very strong influence on the rheological properties of the coating colours, both on the strain rate dependence of the apparent viscosity and on the viscoelasticity. The effects of two different grades of carboxymethylcellulose (CMC) and one grade of hydroxyethylcellulose (HEC), on the rheological properties at room temperature of a clay-based coating colour at pH 8, have been investigated. It is concluded that the high values of the dynamic modulus of the colours are due to interactions between the cellulose derivatives and the solid particles, i.e. mainly the clay particles. For HEC this interaction is associated with adsorption of the polymeric molecules on the clay particles. In the case of CMC, the adsorption is strongly retarded by the presence of the dispersant (a polyacrylate salt). It is suggested that the marked elasticity of the CMC-containing colour in addition to a possible polymer adsorption may be due to charge interactions and/or depletion flocculation. The effect of CMC and HEC on the water-retention properties of the colour is also discussed.     

Polymeric liquid sealing of a rotating shaft and rheological effects accompanying its functioning

A new type of contactless sealing of a rotating shaft based on use of normal stress effect developed on shearing in elastic polymeric liquids is reported. Physical phenomena accompanying sealing function, such as self-heating of a liquid, separation of polymer under strain from the walls by a water film, foaming of the polymer have been studied. The problem of polymer flow and of its self-heating between two coaxial disks has been considered; the problem serves as a basis for sealing calculations.     

Wall effects in the flow of flexible polymer solutions through small pores

Effective viscosities of dilute and semidilute flexible solutions flowing through small cylindrical pores were determined in the Newtonian regime for various pore diameters. The low viscosities relative to the bulk were associated with a depletion phenomenon due to a steric exclusion of macromolecules from the pore wall. Using a two-fluid flow model, the depletion layer thickness was determined and discussed as a function of polymer concentration, ionic strength, and molecular weight. This thickness, which was constant and close to the macromolecule gyration radius in dilute regime, was found to decrease rapidly with polymer concentration in the semidilute regime.     

Finite shear strain behavior of a crosslinking polydimethylsiloxane near its gel point

A power law distribution of relaxation times, large normal stress differences, and physical rupture of molecular network strands dominate the shear behavior of polymers at the gel point (critical gels). This is shown in a series of well-defined experiments with increasing magnitude of shear on a model-network polymer system consisting of a linear, telechelic, vinyl-terminated poly-dimethylsiloxane (PDMS) and a four-functional siloxane crosslinker. Stable samples were prepared by stopping the crosslinking reaction at different extents of reaction in the vicinity of the gel point (GP). The Gel Equation has been shown to be valid up to strains of about 2 when using a finite strain tensor. Larger strains have been found to disrupt the network structure of the crosslinking polymer, and introduce a mechanical delay to the gel point. A sample that was crosslinked beyond the gel point (p>p _c ) can be reduced from the solid state to a critical gel, or even to a viscoelastic liquid, depending on the magnitude of shear strain. As a consequence, the relaxation exponent of a critical gel created under the influence of shear is less than that of a quiescently crosslinked critical gel.     

Prediction of stress in a linear viscoelastic solid strained while cooling

A simplethermoelastic method is proposed, and justified, for predicting stresses arising during cooling of a linearviscoelastic solid. It is equivalent to representing the material by an array of spring-switch thermoelastic elements. The final stress resulting from an increment of strain is calculated using isochronal modulus data applying to the temperature at which the strain was applied, modified to accommodate temperature dependence of the limiting moduli. The method is exact for a material whose relaxation times and limiting moduli scale uniformly with change in temperature, with time-temperature shift factora _T obeying the Arrhenius equation, cooled such that reciprocal absolute temperature is linear in time. For other cooling sequences it is useful as an approximation. In particular, it assists the computational prediction of stresses arising during cooling in polymer processes.     

Some inverse problems in rheology leading to integral equations

Two inverse problems of the integral type, which are of the general importance to rheology, are discussed. The first of them is the possibility of calculating the molecular weight distribution (MWD) from the flow curve and the second one is the interrelation between creep and relaxation functions. It was shown that the first problem is incorrect and any solution is unstable in respect to minor experimental errors. It means that the general solution of this problem is impossible in principle and only estimations of the width of unimodal MWD can be received from the curvature of the flow curve. The possibility of the correct calculation of the creep function exists in case the relaxation curve being approximated by the sum of exponential members. But the approximation of the relaxation curve within the experimental accuracy is the necessary, but not sufficient condition for the correct solution of this integral inverse problem, because not every mode of approximation leads to the satisfactory prediction of creep function.Delivered as the Courtaulds Lecture at the Golden Jubilee Conference of the British Society of Rheology and Third European Rheology Conference, Edinburgh, 3–7 September, 1990.     

The effect of molecular weight distribution on the elongational properties of linear polymers

The elongational properties of a series of six polypropylene and two polystyrene samples have been studied at constant rate of strain. A Wagner-type constitutive equation has been used to fit the experimental data, and the shape of the damping function has been correlated with the polydispersity index of the samples. As the memory function or relaxation function of linear viscoelasticity may be derived from the molecular-weight distribution using either molecular or phenomenological models, it is therefore possible to calculate the stress growth function of a linear polymer in elongation from its molecular-weight distribution.     

A boundary element simulation of the unsteady motion of a sphere in a cylindrical tube containing a viscoelastic fluid

A boundary element method is used to simulate the unsteady motion of a sphere falling under gravity along the centreline of a cylindrical tube containing a viscoelastic fluid. The fluid is modelled by the upper-convected Maxwell constitutive equation. Results show that the viscoelasticity of the liquid leads to a damped oscillation in sphere velocity about its terminal value. The maximum sphere velocity, which occurs in the first overshoot, is approximately proportional to the square root of the Weissenberg number when the ratio of the sphere radius to the tube radius is sufficiently small. Particular attention is also paid to the wall effects. It is shown that a closer wall reduces the oscillatory amplitude of the sphere velocity but increases its frequency. The results suggest that the falling-ball technique, which is now widely used for viscosity measurement, might also be used for the determination of a relaxation time for a viscoelastic fluid.     

The role of short chain molecules for the rheology of polystyrene melts.

Atactic polystyrenes of narrow molar mass distribution with average molar masses larger than the critical molar massM _c were mixed with similar polystyrenes of molecular masses lower thanM _c . Linear viscoelastic melt properties of these binary blends were measured with a dynamic viscometer of the concentric cylinder type. One of the experimental findings is that the time-temperature shift factorsa _T are dependent on the composition of the samples. This can be understood, if free volume due to chain-ends is taken into account. A computer-fitted WLF-equation being modified in a proper way leads to the following results: At the glass-transition-temperature the fraction of free volume in polystyrene of infinite molar mass is only 0.015. At a temperature of 180 °C the mean value of the free volume at a chain end is 0.029 nm³ for the polystyrene investigated.     

Molecular interpretation of the behaviour of polyisobutylene in different solvents

The effects of solvent environment on the behaviour of a high molecular weight polyisobutylene dissolved in kerosene and various grades of poly-1-butene solvent mixtures are investigated. The dependence of various molecular parameters such as zero-shear viscosity, intrinsic viscosity, specific viscosity, relaxation time and molecular expansion factor, on the polymer concentration, type of solvent and solvent viscosity is studied in the vicinity of dilute and semidilute regions (near the critical concentrationc ^*). The dependence of these parameters on solvent environment follows qualitatively Zimm's molecular model. The dependence on the polymer concentration deviates from this dilute solution theory. The effects of temperature on the zero-shear viscosity and the Maxwell relaxation time are also presented for two PIB solutions.     

Elongational rheology of polyethylene melts — temporary network constitutive laws

The uniaxial elongational properties of various polyethylenes have been evaluated using an elongational rheometer and a melt-strength apparatus. It is possible to derive the data obtained in elongation from the distribution of relaxation times obtained from oscillatory shearing measurements (linear viscoelasticity), using a Wagner constitutive equation. The effects of the molecular parameters of the samples have been studied, in particular the effect of polydispersity on the shape of the damping function.     

The molecular theory of viscoelasticity for thermoplastic elastomer SBS (SIS) at large deformations

A microstructure model for SBS and SIS triblock copolymers with hard domains as multifunctional reinforcing fillers is proposed. Based on this model and proposed mechanism of large deformations, the probability distribution function of the end-to-end vector for each constituent chain and the free energy of deformation for the total networks was calculated by the combination of statistical thermodynamics and kinetics. A new molecular theory of non-linear visco-elasticity for SBS and SIS at large deformations is presented. It is successful in relating the viscoelastic state to molecular constitution by three important parameters (C ₁₀₀,C ₀₂₀, andC ₂₀₀) of the networks. The relations of stress to strain for four types of deformation, the elastic modulus and the constitutive equation for the stress relaxation were derived from this theory. It provides a theoretical foundation for studying the relationships of multiphase network structures and mechanical properties at large deformations. An excellent agreement between the theoretical relationships and experimental data from the experiments and the reference was obtained.Project supported by the National Natural Foundation of China