Crystal Structure Study of Co(II) Complexes with 2,2′-(1,4-Ethylenedioxyl) Dibenzoic Acid-[Co · L · (H2O)3]n · nH2O· 0.2 nH2O

The structure ofS the title complex [Co. L. (H₂O)₃]_n. nH₂O. 0.2 nH₂O has been established by single crystal X-ray diffraction. Crystals of the complex are monoclinic, space group C2/c with cell constants α = 45.29(4), b=10.631(6), c = 8.015(6) Å, β = 90.65(8)°, Z = 8, D_c = 1.489 g. cm⁻³ The structure was solved and refined to R =0.0478 (wR = 0.0577). In the chain structure, Co(II) ions are hexacoordinated by 0 atoms in an octahedral arrangement. CoO₆ octahedra share corners (bridged) through O atoms of water, with each L^2--ligand binding two adjacent Co atoms.     

Structural features of a new [Fe(nicotinamide)2(H2O)4]·[Fe(H2O)6]·(SO4)2·2H2O complex

A new nicotinamide complex of Fe(II) cation was prepared by reaction between ferrous sulfate and nicotinamide in aqueous solution. The complex was characterized on the basis of elemental analysis, FT IR and UV–VIS spectroscopy, electrochemistry (cyclic voltammetry) and X–ray crystallography. The complex consists of the molecular composition of [Fe(nicotinamide)₂(H₂O)₄]· [Fe(H₂O)₆]·(SO₄)₂·2H₂O. The complex crystallizes in the monoclinic space group P 2₁/c [a = 12.862(3), b = 7.110(3), c = 16.382(3) Å; β = 95.79(2)°]. It has been proven that nicotinamide is coordinated to Fe(II) through the nitrogen atom of its heterocyclic ring. © 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim     

Preparation and characterisation of Ag incorporated Al2O3 nanocomposite films obtained by sol‐gel method

Sol‐gel route has been applied for a deposition of the thin films of aluminum oxide and Ag embedded in Al₂O₃ films. The films are spin‐coated on Si and quartz substrates with the film thickness of 120 nm. XRD analysis has been used for the determination of the film structure. FTIR spectroscopy is applied for studying vibrational properties of the obtained coatings. Optical characterization is done by UV‐VIS spectroscopy. The formation of Ag nanoparticles has been confirmed by XRD and optical data. The sol‐gel process is found to be useful technology for incorporation of Ag nanoparticles in the metal oxide matrices. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

*Ir4+ ion‐free 12CaO·7Al2O3 single crystal grown by the CZ method

Ir⁴⁺ ion‐free 12CaO•7Al₂O₃ (C12A7) single crystals that were colorless and transparent have been grown by the CZ method under 0.5% oxygen‐containing nitrogen atmospheres for the first time. Powder X‐ray diffraction patterns and X‐ray single‐crystal diffraction were used to investigate the microstructure and quality of the C12A7 single crystal. The results show that the crystal was a C12A7 single crystal with tetragonal symmetry. The content of Ir⁴⁺ in the C12A7 single crystal was tested by ICP along with visible‐light transmittance. There was no Ir⁴⁺ in the C12A7 crystal grown in a 0.5% oxygen‐containing nitrogen atmosphere. Contents of Ir⁴⁺ in C12A7 crystal grown under 1% and 2% oxygen‐containing nitrogen atmospheres were 500 ppm and 400 ppm, respectively. The microstructure of C12A7 single crystal was determined by the content of oxygen in the growth process: the occurrence of bubbles and color increase when the content of oxygen is increased. Bubbles and color decrease when the oxygen content is lowered, bubbles disappeared and the color of C12A7 turns into transparent when the content of oxygen is 0.5%, the C12A7 phase decomposed when the content of oxygen was lower than 0.5%. So, the content of oxygen was responsible for the bubbles, color and cracking, and these also can be limited by controlling the content of oxygen.     

Hydrothermal synthesis and formation of 4ZnO·B2O3·H2O whiskers via a new route

4ZnO·B₂O₃·H₂O whiskers were prepared from 2ZnO·3B₂O₃·3.5H₂O under hydrothermal process at 160 °C for 10 h. The synthesized product was characterized by XRD, SEM, TG‐DSC and FT‐IR. SEM results showed that the synthesized 4ZnO·B₂O₃·H₂O whiskers' length was about 3–10 μm and the diameter was 0.2–0.3 μm. Further study on the whiskers' growth process and mechanism showed that the formation of the whiskers went through three stages and the morphology of 4ZnO·B₂O₃·H₂O changed from irregular particles to rod‐like structures and finally to whiskers. The variation of the morphology of the 4ZnO·B₂O₃·H₂O whisker with the concentration of the starting material was investigated. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and crystal structure of [CuCl(phen)2]3H3V10O28 · 7 H2O

The new compound, [CuCl(phen)₂]₃H₃V₁₀O₂₈ · 7 H₂O, was prepared by reaction of an aqueous KVO₃ solution (pH 3) with an aqueous solution of CuSO₄ · 5 H₂O in which 1,10‐phenanthroline (phen) and KCl were added. The crystal structure of the compound was determined, and the proton position in H₃V₁₀O₂₈^3– were calculated by the bond length/bond number method and also determined from difference electron density map. The protons are bound to colinearly arranged μ–OV₂ and μ–OV₃ groups which is the common protonation type in trihydrogen decavanadates. The structure crystallizes in P1 space group symmetry. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structure,growth and optical properties of Zn0.24Ni0.76(SO4)·7H2O single crystal

A new crystalline complex zinc nickel sulfate heptahydrate (ZNSH) has been prepared. The crystal structure was investigated by x‐ray single crystal diffraction method and the empirical formula is Zn_0.24Ni_0.76(SO₄)·7H₂O. The ZNSH crystal belongs to the orthorhombic space group P2₁2₁2₁ with cell parameters a = 6.7742(14) Å, b = 11.748(2) Å, c = 12.009(2) Å. The deep‐green ZNSH single crystal with dimension of 30 × 25 × 25 mm³ has been grown by the cooling solution method. The constituent ratio of ZNSH crystal grown from various compounding solutions at temperature range 40‐50 °C is approximate invariant. The crystal absorption spectra with theoretical analysis are reported. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of Ca on HoPO4·nH2O (n = 1 and 2) crystallization from phosphoric acid solution

Ca‐substituted holmium phosphate, isomorphic with tetragonal form of HoPO₄·H₂O was synthesized by crystallization from boiling phosphoric acid (2 M H₃PO₄) solution containing 0.02M of Ho and 0–0.2 M of Ca. Calcium concentration, higher than 0.2 M Ca in solution resulted in biphasic solid crystallization: tetragonal HoPO₄·H₂O and orthorhombic HoPO₄·2H₂O. Ca incorporation in the solid according to substitution mechanism: Ca²⁺ + H⁺ ↔ Ho³⁺ was limited to ∼3 wt.% and was coupled with simultaneous incorporation of HPO₄²⁻. Ca for Ho substitution caused an expansion of the tetragonal unit cell of HoPO₄·H₂O, resulted from differences in the ionic radii (r_Ca > r_Ho). Effects of thermal treatment at 900 °C were as follows: (i) the orthorhombic admixture of HoPO₄·2H₂O re‐crystallized into tetragonal anhydrous HoPO₄, (ii) Ca–at first dissolved in crystal structure of HoPO₄·H₂O was expelled from it during re‐crystallization to form Ca(PO₃)₂, and that was associated with a contraction of the unit cell; a ‐ and c‐ axes went down to the level of Ca‐free anhydrous tetragonal form of HoPO₄. (iii) HPO₄²⁻ present in the solids as prepared underwent condensation according to reaction 2HPO₄²⁻ → P₂O₇⁴⁻ + H₂O. Scanning electron micrographs revealed significant changes in size and morphology of the crystals ranging from spherical globules of HoPO₄·H₂O formed in Ca‐free H₃PO₄ with increasing diameter in the presence of lower Ca concentration to rod‐like crystals organized in bundles resembling the “scheaf of wheat”, while crystallized from phosphoric acid solution with higher than 0.2 M Ca.     

Structural and mechanical properties of KН2PО4 single crystals with embedded nanoparticles and organic molecules

Single crystals of KDP crystals with embedded Urea molecules and TiO₂ nanoparticles have been grown from aqueous solution by the temperature lowering method. The effect of the organic molecules and nanoparticles on the structural and mechanical properties has been studied. It has been observed that addition of Urea molecules improves laser induced damage threshold and mechanical strength of the crystal, while TiO₂ nanoparticles have the opposite effect. The structure and composition of KDP:Urea crystal are studied by three‐crystal X‐ray diffraction analysis, which reveals the existence of a correlation between the increase of the microhardness value and the change of the crystal lattice parameter. The surface features of KDP:TiO₂ crystals are analyzed by scanning electron microscopy that reveals the presence of quasi‐equidistant growth bands caused by capture of the nanoparticles. It is shown that the rise of TiO₂ nanoparticles concentration up to 10⁻⁴ wt.% and higher resulted in 3‐fold reduction of the laser damage threshold of KDP:TiO₂ relative to pure KDP in [001] and [100] crystallographic directions. It is found that microhardness and fracture toughness decrease at the nanoparticles concentration of 10⁻³ wt.% due to crack formation at crystal lattice discontinuities. The grown crystals also have been subjected to dielectric studies.     

Synthesis of radial‐like ZnO structure by hydrothermal method with ZnSO4·7H2O and Zn(CH3COO)2·2H2O as zinc sources

Radial‐like ZnO structures were prepared using zinc sulfate (ZnSO₄·7H₂O) and zinc acetate [Zn(CH₃COO)₂·2H₂O] as zinc sources by a facile template‐free hydrothermal method in this paper. Structural and optical properties of radial‐like ZnO structures are characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV‐vis spectrophotometer and photoluminescence measurement (PL). It has been found that the distinct surface morphologies of radial‐like ZnO structures grown by different zinc sources. Slim radial‐like ZnO with a hexagonal wurtzite structure is grown by using ZnSO₄·7H₂O as zinc sources, whereas coarse radial‐like ZnO with zincite structure is achieved by zinc acetate. The UV‐vis absorption spectra of them both display an obvious and significant absorption in the ultraviolet region. The room temperature PL spectra of ZnO structures grown by two different zinc sources possess a common feature that consists of a strong ultraviolet (UV) peak and visible emission band.     

Electron paramagnetic resonance of Gd3+ in Eu2Zn3(NO3)12·24H2O single crystals

Electron paramagnetic resonance of Gd³⁺ in Eu₂Zn₃(NO₃)₁₂·24H₂O single crystals is studied at ≈9.45 GHz and at 298 and 77 K. Gd³⁺ substitutes for the Eu³⁺ site. In addition to the allowed fine structure lines, forbidden transitions (ΔM = ±2,±3,±4,±5) are observed. The superposition model is applied to the zero‐field splitting parameter b₂⁰. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

高温高速流场条件下蓝宝石材料对红外成像影响分析

蓝宝石是一种性能优良的红外窗口材料,文章结合某高速飞行器应用要求设计了高温高速流场条件下蓝宝石对红外成像影响试验,分析了蓝宝石对红外成像影响结果,提出了对各种影响的校正方法,为高速飞行器红外成像制导技术应用研究提供了技术基础.     

Synthesis and characterization of single crystals of the layered copper hydroxide acetate Cu2(OH)3(CH3COO)·H2O

Single‐crystals of the layered copper hydroxide acetate Cu₂(OH)₃(CH₃COO)·H₂O were synthesized by heating copper acetate solution at 60 °C. The standard synthesis of the title compound based on slow titration of copper acetate solution with NaOH yielded materials with worse morphology and an additional phase present. The obtained products were characterized with powder X‐ray diffraction, high temperature powder X‐ray diffraction, scanning electron microscopy and infrared spectroscopy. The crystal structure was determined from single‐crystal X‐ray diffraction data, collected both at 120 K and at 293 K. The title compound crystallizes in the monoclinic botallackite‐type layered structure, space group P 2₁, with the lattice parameters a = 5.5776(3) Å, b = 6.0733(2) Å, c = 18.5134(8) Å, β = 91.802(4)° and a = 5.5875(4)Å, b = 6.0987(4) Å, c = 18.6801(10)Å, β = 91.934(5)° for 120 K and for 293 K, respectively. Acetate groups and water molecules are interlayered between corrugated sheets of edge‐sharing CuO6 octahedra exhibiting strong distortion resulted from the Jahn‐Teller effect. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Unidirectional growth of α‐NiSO4·6H2O crystal by Sankaranarayanan–Ramasamy (SR) method

Large cylindrical [001] direction α‐nickel sulphate hexahydrate crystal with 20 mm diameter and 140 mm length was grown from an aqueous solution by uniaxially solution‐crystallization method of Sankaranarayanan–Ramasamy (SR). The grown crystal was examined by X‐ray diffraction, UV‐Vis‐NIR spectroscopy and TGA/DTA analysis methods.     

Studies on fabrication of urchin‐like WO3·H2O hollow spheres and their photocatalytic properties

Urchin‐like tungsten oxide hydrate (WO₃ · H₂O) hollow spheres were successfully synthesized via a self‐sacrifice template method at low temperature. The effects of reaction parameters on the preparation were studied in solution. The growth mechanism was also proposed on the basis of experimental results. In addition, the acid amount and temperature have important effects on size control of the as‐obtained samples. The achieved nanoarchitectures have typical diameters of 4–6 μm with nanoflakes of several nanometers at surface. Crystal structure, morphology, and composition of final nanostructures were characterized by X–ray diffraction (XRD) and scanning electron microscopy (SEM). Degradation experiments of organic contaminant were also performed on samples of hollow spheres and walnut‐like structures under visible‐light illumination. Hollow sphere sample exhibited better photocatalytic capability than walnut‐like sample. Possible mechanism was studied for WO₃ · H₂O assisted photocatalytic degradation of organic contaminant under visible light.     

Synthesis and crystal structure of a new inorganic – organic complex: (4‐ClC7H6NH3)9[Nd(P6O18)2]·9H2O

Single crystals of (4‐ClC₇H₆NH₃)₉[Nd(P₆O₁₈)₂]·9H₂O were synthesized in aqueous solution. This compound crystallizes in a triclinic P1 unit‐cell, with a = 14.898(6), b = 18.049(7), c = 20.695(6)Å, α = 102.04(3), β = 100.49(3), γ = 98.82(3)°, V = 5245(4) ų and Z = 2. The crystal structure has been solved and refined to R = 0.043 (Rw = 0.061) for 20420 observed reflections. The atomic arrangement of the title compound can be described as infinite layers built by complex of Neodyme [Nd(P₆O₁₈)₂] and nine water molecules. The organic cations are located in the space delimited by the successive inorganic layers. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Equilibrium coefficients of co‐crystallization of M2+ ions with MgSeO4·6H2O and their dependences on various physicochemical factors

Equilibrium co‐crystallization coefficients of low amounts of M²⁺ions (M²⁺ = {Ni²⁺, Cu²⁺, Co²⁺, Zn²⁺, Mn²⁺, Cd²⁺}) with MgSeO₄·6H₂O at 25 °C have been determined. Their values are comprised in the range: 0.058 (for Cd) < k_eq < 1.57 (for Co) and depend on some physicochemical and crystal chemical properties of both: co‐crystallizing salts (MSeO₄·nH₂O) and co‐crystallizing ions (M²⁺). These dependences are sometimes such strong, that they make it possible to derive simple formulae permitting estimation of k_eq coefficients at average error not exceeding 17%. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Some features of thermo‐activated structural transformation of biogenic and synthetic Mg‐containing apatite with β‐tricalcium‐magnesium phosphate formation

Temperature transformation of biogenic and synthetic Mg‐containing apatite with β‐tricalcium‐magnesium phosphate (β‐TCMP) formation was investigated by X‐ray diffraction. Samples were annealed in air at the temperature range from 600 to 1200 °C at intervals 100 °C and cooled down to room temperature. The appearance of β‐TCMP was ascertained in samples annealed at 800 °C. As revealed, the relative amount of β‐TCMP increases and Mg concentration in this phase decreases as the annealing temperature is raised. While this, the replacement degree of Ca by Mg in the β‐TCMP lattice is the annealing temperature function and does not depend either on sample origin (biogenic/synthetic) or on initial Mg concentration. The results of present work together with other investigation data testify to a high thermally activated mobility of Mg both in structure of Mg‐containing apatites and in the structure of β‐TCMP formed after thermal decomposition. Obtained data can be used for new biomaterials design with varied prolongation of Mg released into the living biological tissue. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)