Growth and characterization of calcium hydrogen phosphate dihydrate crystals from single diffusion gel technique

Calcium hydrogen phosphate dihydrate (CaHPO₄·2H₂O, CHPD) a dissolved mineral in urine is known to cause renal or bladder stones in both human and animals. Growth of CHPD or brushite using sodium metasilicate gel techniques followed by light and polarizing microscopic studies revealed its structural and morphological details. Crystal identity by powder x‐ray diffraction confirmed the FT‐IR and FT‐Raman spectroscopic techniques as alternate methods for fast analysis of brushite crystals which could form as one type of renal stones. P‐O‐P asymmetric stretchings in both FT‐IR (987.2, 874.1 and 792 cm^‐1) and FT‐Raman (986.3 cm^‐1, 1057.6 cm^‐1 and 875.2 cm^‐1) were found as characteristics of brushite crystals. Differential Scanning Calorimetry (DSC) analysis revealed brushite crystallization purity using gel method by studying their endothermic peaks. This study incorporated a multidisciplinary approach in characterizing CHPD crystals grown in vitro to help formulate prevention or dissolution strategy in controlling urinary stone growth. Initial studies with 0.2 M citric acid ions as controlling agent in the nucleation of brushite crystals further support the presented approach. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth of ytterbium tartrate trihydrate crystals in silica and agar‐agar gels and their characterization

Single crystals of ytterbium tartrate trihydrate have been grown by gel method using silica and agar‐agar gels as media of growth. The medium of growth influences the morphology of grown crystals, silica gel yielding single and polycrystalline in the form of spherulites whereas agar‐agar gel leading to growth of single and twinned crystals. Materials grown as single crystals have been characterized by using optical and scanning electron microscopy (SEM), EDAX, XRD, FT‐IR, CHN and thermogravimetric techniques. The stoichiometry of the grown single crystals is suggested to be Yb(C₄H₄O₆) (C₄H₅O₆).3H₂O. The FT‐IR spectrum shows the presence of singly as well as doubly ionized tartrate ligands. Results of thermal analysis indicate that the material is thermally stable up to a temperature of 200 °C. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of highly ordered hBN in presence of group I/IIA carbonates by solid state reaction

This comprehensive study declares experimentally the effects of IA/IIA metal carbonates on the formation of hexagonal boron nitride (hBN) with the aid of the available experimental methods as regards Fourier transform infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (TEM). hBN is synthesized in the existence of the metal carbonates at the low temperature by modified O'Connor method. The experimental findings of FT‐IR and XRD investigations show that the addition of metal carbonates affects considerably the crystallization of hBN powder during the synthesis process. The presence of the high concentration level of the additions improves harshly the crystallinity. In this respect, the graphitization index deduced from the XRD patterns reduces with the enhancement in the amount of the dopant content. At the same time, the differentiation between the products is analyzed by the SEM surveys. According to the results, the materials synthesized by the Li₂CO₃ powder exhibit both the tubular form and rod‐like while the other samples prepared by the CaCO₃ chemical dopant display the homogeneous plates. Even, the TEM images confirm the nanowires and nanotubes structures such as multi‐walled cylindrical, bamboo nanotubes in all the materials studied in this work.     

Vanadium pentoxide nanobelts: One pot synthesis and its lithium storage behavior

In this paper, we report a synthesis, characterization and electrochemical properties of V₂O₅ nanobelts. V₂O₅ nanobelts have been prepared via hydrothermal treatment of commercial V₂O₅ in acidic (HCl/H₂SO₄) medium at relatively low temperature (160 °C). The hydrothermally derived products have been characterized by powder X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), Raman spectroscopy, X‐ray photo electron spectroscopy (XPS), UV‐Vis spectroscopy, Scanning/Transmission electron microscopy (SEM/TEM). XRD pattern of V₂O₅ nanobelts show an orthorhombic phase. From the FTIR spectrum, the peak observed at 1018 cm⁻¹ is characteristic of the stretching vibration mode of the terminal vanadyl, V = O. The UV‐Vis absorption spectrum of V₂O₅ nanobelts show maximum absorbance at 430 nm, which was blue‐shifted compared to that of bulk V₂O₅. TEM micrographs reveal that the products consist of nanobelts of 40‐200 nm in thickness and several tens of micrometers in length. The electrochemical analysis shows an initial discharge capacity of 360 mAh g⁻¹ and its almost stabilized capacity is reached to 250 mAh g⁻¹ after 55 cycles. A probable reaction mechanism for the formation of orthorhombic V₂O₅ nanobelts is proposed.     

Solvothermal preparation of graphite-like C3N4 nanocrystals

Graphite-like C₃N₄ nanocrystals were synthesized by the reaction of CCl₄ and NH₄Cl at 400°C without any catalyst. XRD and TEM examinations indicate that the average size of the crystals is about 11 nm with a good crystallinity, and CN and C–N bonds can be observed at 1617.95 and 1271.09 cm⁻¹, respectively, in the IR spectrum.     

Spectral studies of methyl‐p‐hydroxy benzoate: An organic nonlinear optical crystalline material

The single crystals of Methyl‐p‐Hydroxy Benzoate (MHB) were grown by solution growth technique and characterized by X‐ray diffraction (single crystal), density, melting point, UV‐Vis, FT‐IR and FT‐Raman techniques. Electron Paramagnetic Resonance (EPR) spectra of Cu²⁺: MHB were recorded and the spin Hamiltonian parameters were evaluated. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal growth of PZN‐PT single crystals and critical issues for higher piezoelectric coefficient

Single crystals of lead zinc niobate‐lead titanate (1‐x)Pb(Zn_1/3Nb_2/3)O₃–xPbTiO₃ for x = 8% and 9% have been grown by flux method using Lead Oxide (PbO) as flux. Low scan rate XRD has been carried out to investigate on the structural influence of the compositional variations in the grown crystals. Transmission spectra in the range of UV‐Vis‐Near IR and mid IR regions have been carried out to understand the distortions caused in the BO₆ octahedral lattice. Morphological aspects of as‐grown PZN‐PT crystals have also been investigated. Dielectric measurements clearly explained the dependence of T_c and diffusiveness with PT content. The values of P_r and E_cobtained from P‐E loops suggest the presence of ordered domain state in these PZN‐PT single crystals. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structural,thermal and optical characterizations of a NLO material: L‐alaninium oxalate

An organic electro‐optic and nonlinear optical (NLO) material, L‐alaninium oxalate, was synthesized by the standard method. The synthesized material was purified by repeated recrystallization. Single crystals were grown by the slow evaporation technique. The grown crystals were transparent and had optimum dimensions (20 × 3 × 2 mm³) and were characterized by single crystal XRD, FT‐NMR, FT‐IR, TGA‐DTA and UV‐Vis‐NIR techniques. The second harmonic generation (SHG) from the material was confirmed using Nd:YAG laser. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Near‐stoichiometric LiNbO3:ZrO2 single crystal growth by micro pulling down method

Crack‐free, rod‐shaped single crystals of undoped and 0.5, 0.7 and 1.0 mol% ZrO₂‐doped LiNbO₃ with a near‐stoichiometric composition were grown by the micro‐pulling down (μ‐PD) method. The structural properties of the grown crystals were examined by powder X‐ray diffraction (XRD). Electron probe micro analysis (EPMA) of the near‐stoichiometric LiNbO₃ single crystals revealed the homogeneous incorporation of Zr ions. The change in the refractive index and IR transmission spectra of the grown crystals were examined as a function of the Zr concentration. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and thermal characterization of methylammonium tetrachloro zincate (II) monohydrate crystals

Single crystals of methylammonium tetrachloro zincate (II) monohydrate were grown by slow evaporation of saturated aqueous solutions at room temperature. The grown crystals were colourless, bright and transparent. The crystals were characterized through elemental analysis, powder X‐ray diffraction, thermogravimetric (TG‐DTA) and low temperature differential scanning calorimetric (DSC) techniques. While the powder XRD pattern shows the crystallinity of the compound, the elemental analysis and the TG‐DTA confirm the stoichiometry of the compound. The low temperature DSC indicates first order structural phase transition at ‐8°C during heating cycle. The FTIR and far IR spectra of the compound show characteristic vibrational frequencies due to CH₃NH₃ and ZnCl₄^2‐ ions and other chemical bonds. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A new nonlinear optical crystal: Bi2O2(OH)(NO3)

The nonlinear optical (NLO) properties of Bi₂O₂(OH)(NO₃) crystals have been reported for the first time. Bi₂O₂(OH)(NO₃) crystals with dimensions of 1.3×1.2×0.1 mm³ have been grown by hydrothermal method, and the crystals characterized by X‐ray powder diffraction (XRD), SEM and IR. The measured second harmonic generation (SHG) effect of Bi₂O₂(OH)(NO₃) was about 7 times that of KDP. The mechanism responsible for the large SHG of Bi₂O₂(OH)(NO₃) was explained according to its structure. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth of barium oxalate crystals in agar–agar gel and their characterization

Single crystals of barium oxalate have been grown by gel method using agar‐agar gel as media of growth at ambient temperature. The optimum conditions were established by varying various parameters such as concentration of gel, concentration of reactant, gel setting time etc. Prismatic platy shaped transparent crystals were obtained. The grown crystals were characterized through powder X‐ray diffraction (XRD), Fourier transform infrared (FT‐IR) studies, Thermogravimetric (TGA) and Differential thermal analysis (DTA). The compound crystallizes under monoclinic structure with lattice parameters a = 6.6562 Å, b = 8.0464 Å, c = 2.8090 Å, β= 96.832°, and V = 149.38 ų. The FT‐IR spectrum indicates OH and carbonyl group along with the presence of metal‐oxygen bond. The TGA indicates 17.75% weight loss at 550°C from which the decomposition pattern is formulated. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth and characterization of Mn2+ doped calcium l‐tartrate crystals

Single crystals of Mn²⁺ doped calcium levo‐ tartrate tetrahydrate (CLTT) were grown by single diffusion gel growth technique in silica hydro‐gel media. The doping of Mn²⁺ was varied by mixing 0.001M, 0.005M, 0.01M, 0.05M, and 0.1M solutions of MnCl₂ with 1M CaCl₂ solution in equal volumes in the supernatant solutions. The actual amount of Mn²⁺ doping in CLTT crystals was estimated by ICP (Inductively Coupled Plasma) technique. The powder XRD of the samples suggested no significant change in the unit cell dimensions and the presence of any extra phase. The FT‐IR spectra indicated the presence of water molecule, O‐H bond, C‐O bond and carbonyl C=O bond. The EPR spectra confirmed the presence of Mn²⁺ ions in the crystals. The variation of the dielectric constant with temperature confirmed the earlier results of pure calcium tartrate crystals and indicated the ferroelectric nature of the doped crystals. As the amount of doping of Mn²⁺ increased the value of dielectric constant increased. The results are discussed. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of methylammonium tetrachlorocuprate (II) dihydrate crystals

Single crystals of methylammonium tetrachlorocuprate (II) dihydrate were obtained by slow evaporation method at room temperature. The crystals were characterized through powder XRD, thermogravimetric (TG‐DTA), low temperature DSC studies and FTIR and far IR spectra. While the powder XRD confirms the crystallinity of the compound, the TG and DTA studies confirm the formation of the compound in the stoichiometric ratio and the presence of two water molecules of crystallization. The low temperature DSC study indicates a thermal anomaly at ‐3°C. The ordering of CH₃NH₃ group at low temperature causes phase transitions in the compound. The IR spectra characterize the various chemical bonding and water molecules in the compound. Laser Raman spectral studies under progress would help understand the mechanism of phase transitions at low temperatures. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

PMA‐b‐PAA‐controlled synthesis of one‐dimensional CaCO3 superstructures

Crystallization of calcium carbonate (CaCO₃) crystals by a gas‐liquid diffusion method has been carried out in aqueous solution using a double‐hydrophilic block copolymer (DHBC) poly(maleic anhydride)‐b‐poly(acrylic acid) (PMA‐b‐PAA). The as‐prepared products were characterized with X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED), high‐resolution transmission electron microscopy (HRTEM) and infrared spectroscopic analysis (FT‐IR). Uniform one‐dimensional calcite micro/nanostructures with different morphologies are fabricated through an assembled process. The influence of PMA‐b‐PAA copolymer concentration on the morphology of calcite nano/microwires is investigated, which plays an important role in the morphological control of building blocks composed of one‐dimensional calcite crystals. The possible formation mechanism of one‐dimensional CaCO₃ crystals was discussed. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis by precipitation method and investigation of SnO2 nanoparticles

In this paper the synthesis of SnO₂ nanoparticles with average particle size up to about 70 nm using SnCl₂2H₂O and NH₄OH in 1‐botanol solution by the precipitation method is reported and the inhibition of sodium dodecyl sulphate (SDS) on the SnO₂ particle growth is investigated by soaking SnO₂precursor in the SDS solution for 24 h. The as‐prepared SnO₂and SDS modified‐SnO₂ powders, then, were calcined at different temperatures and the X‐ray powder diffraction (XRD) and Fourier transform infrared spectroscopy (FT‐IR) were used to characterize the output samples. The XRD results reveal that the structure of tin‐dioxide is tetragonal rutile and the as‐prepared SnO₂ nanoparticles grow with increasing the annealing temperature, while the SDS treatment prevents the particle growth under the same condition. Furthermore, the FT‐IR results indicate the formation of tin‐hydroxyl group which are then converted into tin‐dioxide with heat treatment. Further characterization of the samples by the transmission electron microscopy (TEM) and the photoluminescence (PL) spectroscopy was carried out. The room temperature PL spectra of SnO₂exhibits broad and strong peak attributed to the surface defects such as oxygen vacancies and intensity of which decreases with the increase in particle size. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal growth and characterization of PbI2‐AgI binary system

The crystals of the binary system PbI₂‐AgI (PIAI) were obtained by heating the mixture of individual PbI₂ (PI) and AgI (AI) placed at 30° angle in the horizontal tubular furnace of variable temperature zone. The crystals were characterized by powder XRD, TG/DTA, FT‐IR and SEM. The 3.37% weight loss in the sample after heating at 853 K is due to the presence of water molecules absorbed (3446 cm^–1) by the crystals during sintering and cooling process. The cell parameters of the crystal were determined using the powder X‐ray data. The PbI₂‐AgI crystallizes in monoclinic system a = 10.799 (±0.009), b = 7.492 (±0.004), c = 6.929(±0.004) Å and α = 90°, β = 108.04(±0.073) γ = 90°, V = 533.18 ų. The electrical conductivity measurements of the crystals showed a sudden change in the current value at the temperature range 385–393 K. The activation energy before and after the drift was found to be 0.49 and 0.35 eV respectively. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

FT‐IR spectroscopic and thermal studies on pure and impurity added calcium tartrate tetrahydrate crystals

Pure and impurity (strontium) added calcium tartrate tetrahydrate single crystals were grown by the gel method. The FT‐IR spectra of these crystals were recorded in the wavenumber range 400–4000 cm^–1. The thermograms of the grown crystals were recorded in the temperature range 50–900 °C. FT‐IR spectra reveals the presence of water molecules, O‐H bond, C‐O and carbonyl C=O bonds. The thermograms show that these crystals are thermally unstable and decompose into its oxide through many stages. DTA curve of the pure crystal shows three endothermic and one exothermic peaks. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effects of synthesis conditions on the yields and properties of HZSM‐5

In the SiO₂‐Al₂O₃‐TPAOH‐NH₄OH system through a two‐step procedure, the effects of synthesis parameters on the yields and properties of HZSM‐5 were studied. As the feeding n(SiO₂)/n(Al₂O₃) ratio increased, the yields of synthesized samples were between 11% and 14% while the crystallinity tended to decrease at the ratio > 300. At the ratio of 150, the yield was 13.7% and the ratio of actual yield to theoretical yield was 93%. The sample shaped ellipse‐like particles of 3 × 10⁻⁶ m. At the n(NH₃)/n(SiO₂) ratio of 1.5, the yield was 13.1% and the sample showed regular ellipse‐like particles of 2 × 10⁻⁶ m. Too high dosage of NH₄OH lowered the yield and the crystallinity. The addition of seed crystal favored the HZSM‐5 synthesis in high crystallinity. At the addition amount of 4%, the yield reached 13.9% and the sample shaped in spherical particles of 0.5 × 10⁻⁶ m. Synthesized HZSM‐5 with a surface area of 455 m²·g⁻¹ and intrinsic acidity showed highly catalytic activity toward the methanol conversion to olefins reaction.     

Enhancement of thermoelectric efficiency in vapor deposited Sb2Te3 and Sb1.8In0.2Te3 crystals

Pure and indium doped antimony telluride (Sb₂Te₃) crystals find applications in high performance room temperature thermoelectric devices. Owing to the meagre physical properties exhibited on the cleavage faces of melt grown samples, an attempt was made to explore the thermoelectric parameters of p‐type crystals grown by the physical vapor deposition (PVD) method. The crystal structure of the grown platelets (9 mm× 8 mm× 2 mm) was identified as rhombohedral by x‐ray powder diffraction method. The energy dispersive analysis confirmed the elemental composition of the crystals. The electron microscopic and scanning probe image studies revealed that the crystals were grown by layer growth mechanism with low surface roughness. At room temperature (300 K), the values of Seebeck coefficient S (⊥ c) and power factor were observed to be higher for Sb_1.8In_0.2Te₃ crystals (155 μVK⁻¹, 2.669 × 10⁻³ W/mK²) than those of pure ones. Upon doping, the thermal conductivity κ (⊥ c) was decreased by 37.14% and thus thermoelectric efficiency was improved. The increased figure of merit, Z = 1.23 × 10⁻³ K⁻¹ for vapour grown Sb_1.8In_0.2Te₃ platelets indicates that it could be used as a potential thermoelectric candidate.