Capsule‐like α‐Fe2O3 nanoparticles: Synthesis,characterization, and growth mechanism

Uniform capsule‐like α‐Fe₂O₃ particles were synthesized via a simple hydrothermal method, employing FeCl₃ and CH₃COONa as the precursors and sodium dodecyl sulfate (SDS) as soft template. X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy were used to characterize the structure of synthesized products. Some factors influencing the formation of capsule‐like α‐Fe₂O₃ particles were systematically investigated, including different kinds of surfactants, the concentration of SDS, and reaction times. The investigation on the evolution formation reveals that SDS was critical to control the morphology of final products, and a possible five‐step growth mechanism was presented by tracking the structures of the products at different reaction stages.     

Room‐temperature synthesis and characterization of cross‐like Pr2(C2O4)3·10H2O micro‐particles

Cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles were synthesized through a simple precipitation method at room temperature. The products were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FESEM), thermogravimetry–differential thermal analysis (TG‐DTA) and photoluminescence (PL). The possible formation mechanism of the cross‐like Pr₂(C₂O₄)₃·10H₂O micro‐particles was discussed, and Pr₆O₁₁ with similar morphology was obtained by calcining the oxalate precursor. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Rapid synthesis of dendrite‐ and platelet‐like α‐Fe2O3 via a hydrothermal oxidation route

Dendrite and platelet‐like α‐Fe₂O₃ microcrystals were synthesized by the oxidation reaction of K₄Fe(CN)₆and NaClO₃ through a simple hydrothermal method. The structures and morphologies of the as‐prepared samples were characterized in detail by X‐ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The experiment results show that NaOH played an important role in controlling the morphology of the final products. The possible mechanism was discussed to elucidate the formation of different morphologies of the α‐Fe₂O₃ microstructures. Besides, the magnetic property of the dendrite α‐Fe₂O₃ microstructure was characterized by a vibrating sample magnetometer (VSM). (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electrospinning synthesis and photocatalytic property of CaFe2O4/MgFe2O4 heterostructure for degradation of tetracycline

CaFe₂O₄/MgFe₂O₄ nanowires with heterostructure had been successfully synthesized by electrospinning method. The obtained samples were systematically characterized by scanning electron microscopy (SEM), X‐Ray diffraction (XRD), UV–Vis diffuse reflectance spectra (UV‐Vis DR) and Environment scanning electron microscopy (ESEM). The novel CaFe₂O₄/MgFe₂O₄ nanowires exhibit an enhanced photocatalytic activity for degrading of tetracycline (TC) under visible light. Compared with bare CaFe₂O₄ or MgFe₂O₄ samples, the prepared CaFe₂O₄/MgFe₂O₄ (Ca:Mg:Fe = 3:2:10) composited nanowires show the best photocatalytic performance with a degradation efficiency of 40% after 150 min reaction time. This enhancement is attributed to the heterostructure of CaFe₂O₄/MgFe₂O₄ nanowires, which effectively repress the recombination of photo‐generated electrons and holes. Based on heterostructure and energy band positions, the enhancement of mechanism under visible‐light enhances the photocatalytic activity.     

A study of the growth process of Co3O4 microcrystals synthesized via a hydrothermal method

Pure Co₃O₄ microcrystals were prepared by a hydrothermal method from Co(NO₃)₂·6H₂O and urea solution, and the effect of thermal treatment time on the growth of Co₃O₄ microcrystals was studied by X‐ray diffraction (XRD), scanning electron microscopy (SEM), Raman and UV‐Vis absorption spectra. The results show that with the thermal treatment time increases from 2 h to 12 h, the shape of as‐prepared Co₃O₄ microcrystals changes from the hedgehog sphere‐like to the as‐cubic one that were stacked by lots of lamella, and finally cubes, and then longer time treatment will only lead to the size growth and agglomeration of particles. In conclusion, the cubic Co₃O₄ microcrystals of uniform size (∼6 μm) are synthesized via a 12‐h thermal treatment. Moreover, the synthesis mechanism has been studied.     

Synthesis,characterization and electrical properties of hybrid Zn2GeO4–ZnO beaded nanowire arrays

We report the syntheses of vertically aligned, beaded zinc germinate (Zn₂GeO₄)/zinc oxide (ZnO) hybrid nanowire arrays via a catalyst-free approach. Vertically aligned ZnO nanowire is used as a lattice matching reactive template for the growth of Zn₂GeO₄/ZnO nanowire. The morphology and structure of the as-prepared samples were characterized using X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). TEM studies revealed the beaded microstructures of the Zn₂GeO₄/ZnO nanowire. The thickness and microstructures of crystalline beads could be easily controlled by tuning the growth duration and temperature. The photoluminescence spectrum of the Zn₂GeO₄/ZnO nanowires is composed of two peaks, i.e., the ultraviolet (UV) peak and the defect peak. For longer treatment duration of the samples, both the UV and defect peak intensities decrease dramatically. One application of the as-prepared Zn₂GeO₄/ZnO nanowire is to use the nanowire as template for the growth of three-dimensionally (3D) aligned, high-density ZnO nanobranches en route to hierarchical structure. The study of field emission properties of the as-prepared samples revealed the low turn-on voltage and high current density electron emission from the 3D ZnO nanobranches as compared to the ZnO nanowires and Zn₂GeO₄/ZnO nanowires. Furthermore, the electrical transport behavior of single hybrid nanowire device indicates the formation of back-to-back Schottky barriers (SBs) formation at the contacts and its application in white-light response has been demonstrated.     

Structural,Raman, and photoluminescence properties of double‐shelled coaxial nanocables of In2O3 core with ZnO and AZO shells

We synthesized In₂O₃/ZnO/Al‐doped ZnO (AZO) core‐double shell nanowires, in which the inner shell (ZnO) and the outer shell (AZO) have been subsequently deposited on the core In₂O₃ nanowires. With their one‐dimensional morphology being preserved, the X‐ray diffraction (XRD), lattice‐resolved transmission electron microscopy (TEM) image, selected area electron diffraction, and Raman spectrum coincidentally revealed that the shell was comprised of hexagonal ZnO phase. In addition, TEM‐EDX investigation revealed the presence of Al elements in the shell region. The thermal annealing at 700 °C did not significantly change the nanowire morphology, however, the XRD spectrum indicated that the ZnO phase was crystallized by the annealing. PL spectrum of the 700 °C‐annealed In₂O₃/ZnO/AZO core‐double shell nanowires was comprised of three Gaussian bands at approximately 2.1 eV, 2.4 eV, and 3.0 eV, respectively. The integrated intensities of 2.1 eV‐, 2.4 eV‐, and 3.0 eV‐bands were decreased by the thermal annealing. This study will pave the road to the preparation and applicaition of double‐shelled nanowires. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

α‐Fe2O3 nanospindles loaded with ZnO nanocrystals: Synthesis and improved gas sensing performance

ZnO/α‐Fe₂O₃ nanocomposites were fabricated through a two‐step hydrothermal method. The morphology and composition of the as‐synthesized products were characterized by X‐ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The gas sensing properties of the fabricated products were investigated towards ethanol, acetone, propanol, isopropanol, formaldehyde, chloroform and so on. The results demonstrated that the ZnO/α‐Fe₂O₃ nanocomposites exhibited excellent sensing properties and showed remarkably higher sensing responses and much lower optimum operating temperature compared to individual ZnO and α‐Fe₂O₃. In addition, the ZnO/α‐Fe₂O₃ nanocomposites have some selectivity for ethanol, propanol and isopropanol. The possible gas sensing mechanism was also proposed. Our studies demonstrate that our fabricated materials could be widely used in the future.     

Facile solvothermal synthesis,growth mechanism and thermoelectric property of flower‐like Bi2Te3

Hierarchical flower‐like Bi₂Te₃ was synthesized through a facile solvothermal method. The crystal structure and morphology of the as‐prepared samples were characterized by X‐ray diffraction (XRD), filed emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and high resolution TEM. The reaction parameters such as reaction time, the amount of glucose, concentration of NaOH and the reaction temperature were systematically investigated. Based on the FESEM observations, a possible mechanism defined as a self‐assembly process accompanied by anisotropic growth mechanism was proposed. Moreover, the thermoelectric properties were measured at the temperature range of 300–600 K. The hierarchical flower‐like Bi₂Te₃ presented good thermoelectrical properties. The maximum ZT value reached up to 0.6 at 600 K, which was higher than that of Bi₂Te₃ nanoparticles.     

Hydrothermal synthesis of porous octahedral Cu microcrystals and their application as hydrogen peroxide sensors

The novel porous octahedral Cu microcrystals were synthesized successfully by a simple one‐step hydrothermal reduction method based on TEA technique. The X‐ray diffraction (XRD) patterns reveal that Cu microcrystals have octahedral crystalline phase and high purity. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies represent that Cu microcrystals have a porous structure on their surface and polycrystalline structure. The asprepared porous Cu structures exhibited good ectrocatalytic activity in response to H₂O₂ reduction and can be used as H₂O₂ sensor. Furthermore, the possible formation mechanism of the POCu was proposed.     

Zr‐doped CeO2 Hollow slightly‐truncated nano‐octahedrons: One‐pot synthesis,characterization and their application in catalysis of CO oxidation

Zirconium‐doped ceria hollow slightly‐truncated nano‐octahedrons (HTNOs) (Ce_1‐xZr_xO₂) were synthesized by a one‐pot, facile hydrothermal method. The morphology and crystalline structure were characterized with powder X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and the high resolution transmission electron microscopy (HRTEM). The composition and chemical valence on the surface of the as‐prepared Ce_1‐xZr_xO₂ powders were detected by X‐ray photoelectron spectroscopy (XPS) and energy dispersive spectrometry (EDS). The surface area and pore size distribution of as‐obtained Zr‐doped ceria HTNOs were measured by N₂ adsorption‐desorption measurement. Mechanisms for the growth of Zr‐doped ceria HTNOs are proposed as both oriented attachment and Ostwald ripening process and the formation of the hollow structure is strongly dependent on the addition of Zr⁴⁺ ions. Furthermore, the as‐obtained Zr‐doped ceria HTNOs revealed superior catalytic activity and thermal stability toward CO oxidation compared to pure ceria. It may provide a new path for the fabrication of inorganic hollow structures on introducing alien metal ions.     

Controllable synthesis and field emission properties of In2O3 nanostructures

Large‐scale In₂O₃ nanorods, nanocubes and nanowires have been successfully synthesized by chemical vapor deposition route under atmospheric pressure. The structures and morphologies were characterized by x‐ray diffraction (XRD), scanning election microscopy (SEM) and high‐resolution transmission electron microscopy (HRTEM). The growth mechanisms of these In₂O₃ nanostructures were analyzed in detail based on the experimental results. Field‐emission measurements of these nanostructures demonstrated that nanorods with rectangular cross‐section possessed good performance with a turn‐on field of 2.47 Vμm^–1 and a field enhancement factor of 4597. The room‐temperature photoluminescence (PL) spectrum of the In₂O₃ nanostructure showed UV emission centered at about 396 nm and visible emissions located at 541 and 623 nm. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of strontium chloroborate whiskers

Single crystalline strontium chloroborate (Sr₂B₅O₉Cl) whiskers with uniform diameter have been synthesized by a facile route based on the calcination of precursor. The precursor was prepared by the sedimentation reaction between SrCl₂ and Na₂B₄O₇ aqueous solution. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared spectrum (FT‐IR). An optimal synthesis temperature for preparing Sr₂B₅O₉Cl whiskers was obtained, and the possible formation process was also presented.     

Preparation of shuttle‐like Sb2S3 nanorod‐bundles via a solvothermal approach under alkaline condition

Uniform shuttle‐like Sb₂S₃ nanorod‐bundles were synthesized via a polyvinylpyrrolidone (PVP) assisted solvothermal approach under alkaline condition, using antimony chloride (SbCl₃) and thiourea (CH₄N₂S, Tu) as the starting materials in ethanol. The phase structure, composition and morphology of the product were characterized by means of X‐ray diffraction (XRD), energy dispersive X‐ray spectrometry (EDS), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy (HRTEM). XRD and EDS results confirm that the synthesized Sb₂S₃ nanorod‐bundles have an orthorhombic structure and an atomic ratio of 3:2 for S:Sb. TEM and HRTEM results show that the shuttle‐like Sb₂S₃ bundles are composed of nanorods with a size distribution of 20‐40 nm and growing along c‐axis. Furthermore, experiments under different reaction conditions were carried out and the mechanism for the growth of nanorod‐bundles was discussed (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and properties of α‐Fe2O3 nanorods

We report synthesis of α‐Fe₂O₃ (hematite) nanorods by reverse micelles method using cetyltrimethyl ammonium bromide (CTAB) as surfactant and calcined at 300 °C. The calcined α‐Fe₂O₃ nanorods were characterized by X‐ray diffraction (XRD), high‐resolution scanning electron microscopy (HRSEM), transmission electron microscopy (TEM), energy dispersive spectrometer (EDS), fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometer (VSM). The result showed that the α‐Fe₂O₃ nanorods were hexagonal structure. The nanorods have diameter of 30‐50 nm and length of 120‐150 nm. The weak ferromagnetic behavior was observed with saturation magnetization = 0.6 emu/g, coercive force = 25 Oe and remanant magnetization = 0.03 emu/g. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hydrothermal synthesis of anatase flower‐like nanostructures for photocatalytic degradation of dye

Flower‐like hierarchical nanostructures of titanium dioxide (TiO₂) have been synthesized in large scale by a facile and controlled hydrothermal and after annealing process. The morphologies of flower‐like hierarchical nanostructures are formed by self‐organization of several tens of radially distributed thin flakes with a thickness of several nanometers holding a larger surface area. The materials are characterized by Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The ultraviolet photocatalytic degradation of R6G dyes has been studied over this flower‐like hierarchical nanostructures and the activity is compared with that of commercial P25 TiO₂ under same conditions. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Micelle-assisted hydrothermal synthesis of the uniform Co3O4 nanorods and its chemoluminescence properties of CO oxidation

Uniform Co₃O₄ nanorods were prepared by a micelle-assisted hydrothermal method. The samples were characterized by scanning electron microscopy (SEM), energy disperse spectra (EDS), transmission electron microscopy (TEM), selected area electron diffraction (ED), X-ray diffraction (XRD), and N₂ adsorption. The chemoluminescence and catalytic oxidation properties of CO and CH₄ over Co₃O₄ nanorods were investigated. The results showed that the micelles played a key role in the formation of uniform nanorods, that the nanorods with a high crystallinity were obtained after being treated hydrothermally, and that the nanorods showed a higher chemoluminescence (CL) intensity of CO oxidation and a higher activity for CH₄ combustion than the bulk one. The adopted ‘one-pot’ synthesis is a facile method, since no further annealing at high temperatures is needed.     

Solvothermal synthesis and good electrochemical property of pinetree like Bi2S3

Hierarchical pinetree like Bi₂S₃ was synthesized through a facile solvothermal route in the mixture of deionized water and tetrahydrofuran. The phase composition, morphology, and structure of the as‐prepared Bi₂S₃ products were characterized by using various techniques including X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). It was found that the pinetree like Bi₂S₃ structures were composed of numerous assembled nanosheets, which had uniform morphology with the mean width and length of about 110 nm and 15 μm, respectively. Furthermore, the electrochemical property of the obtained pinetree like Bi₂S₃ was investigated. The pinetree like Bi₂S₃ presented both the high electrochemical hydrogen storage and electrochemical Li intercalation performance.     

Controllable synthesis of hierarchical strontium molybdate by sonochemical method

Large‐scale chrysanthemum‐like strontium molybdate (SrMoO₄) with hierarchical structure has been successfully synthesized via a facile and fast ultrasound irradiation approach at room temperature. By varying the experimental conditions, SrMoO₄ with different morphologies, such as spindles, peanuts, spheres, and rods, can be obtained. The products are characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected‐area electron diffraction (SAED). The influent parameters including concentration, pH value, and surfactants have been investigated. A possible growth mechanism is proposed and the shape evolution of the products is characterized. The as‐prepared chrysanthemum‐like SrMoO₄ particles are used as the precursor for electrorheological fluid and their electrorheological property is investigated.     

Low temperature synthesis of spindle‐like ZnO nanostructures under microwave irradiation

A simple and general microwave route is developed to synthesize nanostructured ZnO using Zn(acac)₂·H₂O (acac = acetylacetonate) as a single source precursor. The reaction time has a great influence on the morphology of the ZnO nanostructures and an interesting spindle‐like nanostructure is obtained. The microstructure and morphology of the synthesized materials are investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). It is found that all of them with hexagonal wurtzite phase are of single crystalline structure in nature. Ultraviolet–visible (UV‐vis) absorption spectra of these ZnO nanostructures are investigated and a possible formation mechanism for the spindle‐like ZnO nanostructures is also proposed.