Electrochemical and in situ SERS spectroelectrochemical investigations of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol monolayers at a silver electrode

Electrochemically anticorrosive behavior of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol (MTTL) self‐assembled monolayers (SAMs) on the silver electrode was studied by means of electrochemical impedance spectroscopy (EIS) and polarization measurements. The promising inhibition effect of the MTTL for silver had been affirmed. Results of surface‐enhanced Raman scattering (SERS) experiments indicated that the MTTL molecule in a tilted orientation was self‐assembled on the silver surface through S⁶ and N² atoms to form monolayers. An in situ electrochemical SERS experiment implied the changes of adsorption fashion of MTTL momolayers on the silver surface with the potential shifted to more negative direction. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for quantitative measurement of lactic acid at physiological concentration in human serum

Lactic acid is a simple and effective indicator for estimating physiological function. Rapid and sensitive detection of lactic acid is very useful in clinical diagnosis. However, the concentration of lactic acid in the physiological state is too low to be detected using traditional Raman spectroscopy. We applied silver colloidal nanoparticles‐mediated surface‐enhanced Raman spectroscopy (SERS) for rapid identification and quantification of lactic acid. The standard SERS spectra of lactic acid were defined and the 1395 cm⁻¹ band intensity was used for quantification from 0.3 to 2 mM (R² = 0.99). In clinical blood sample measurement, the ultrafiltration (cutoff value 5 kDa) can efficiently reduce background fluorescence to improve SERS performance. We established identical and optimal procedure by adjusting reaction time and volume ratio of serum and nanoparticles to obtain high SERS reproducibility. Finally, we showed that silver colloidal nanoparticles‐mediated SERS technique was successfully applied to detect lactic acid at physiological concentrations in the blood. Copyright © 2010 John Wiley & Sons, Ltd.     

Fabrication and characterization of SERS‐active silver clusters on glassy carbon

In this article, a novel technique for the fabrication of surface enhanced Raman scattering (SERS) active silver clusters on glassy carbon (GC) has been proposed. It was found that silver clusters could be formed on a layer of positively charged poly(diallyldimethylammonium) (PDDA) anchored to a carbon surface by 4‐aminobenzoic acid when a drop containing silver nanoparticles was deposited on it. The characteristics of the obtained silver clusters have been investigated by atomic force microscopy (AFM), SERS and an SERS‐based Raman mapping technique in the form of line scanning. The AFM image shows that the silver clusters consist of several silver nanoparticles and the size of the clusters is in the range 80–100 nm. The SERS spectra of different concentrations of rhodamine 6G (R6G) on the silver clusters were obtained and compared with those from a silver colloid. The apparent enhancement factor (AEF) was estimated to be as large as 3.1 × 10⁴ relative to silver colloid, which might have resulted from the presence of ‘hot‐spots’ at the silver clusters, providing a highly localized electromagnetic field for the large enhancement of the SERS spectra of R6G. The minimum electromagnetic enhancement factor (EEF) is estimated to be 5.4 × 10⁷ by comparison with the SERS spectra of R6G on the silver clusters and on the bare GC surface. SERS‐based Raman mapping technique in the form of line scanning further illustrates the good SERS activity and reproducibility on the silver clusters. Finally, 4‐mercaptopyridine (4‐Mpy) was chosen as an analyte and the lowest detected concentration was investigated by the SERS‐active silver clusters. A concentration of 1.6 × 10⁻¹⁰ M 4‐Mpy could be detected with the SERS‐active silver clusters, showing the great potential of the technique in practical applications of microanalysis with high sensitivity. Copyright © 2006 John Wiley & Sons, Ltd.     

Potential‐induced Raman behavior of individual (R)‐di‐2‐naphthylprolinol molecules on a Ag‐modified Ag electrode

The applicability of surface‐enhanced Raman spectroscopy is demonstrated to probe the adsorption behavior of individual molecules on a Ag electrode. High‐quality SERS spectra of (R)‐di‐2‐naphthylprolinol (DNP) were obtained from ultradilute solutions (10⁻¹² M ) on the Ag‐nanoparticle‐modified Ag electrode, which is attributed to the high electromagnetic (EM) effect of the SERS‐active system as well as to the strong adsorption and interaction of DNP molecules with Ag. The stable SERS spectra present remarkable potential dependence, which gives evidence for the behavior of individual DNP molecules on the Ag surface. Based on statistical analysis for the probability of DNP molecules located in ‘hot spots’, we propose an SERS mechanism for individual molecules in the electrode system, in combination with the hot‐spot model and orientation of the probe molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman and surface‐enhanced Raman studies of α‐aminophosphinic inhibitors of metalloenzymes

Here, we report the nature of new di‐α‐amino (L¹–L³) and α‐amino‐α‐hydroxyphosphinic (L⁴–L⁶) acids, which are considered potential inhibitors of the aminopeptidase N, adsorbed on a colloidal silver surface by means of surface‐enhanced Raman scattering (SERS) spectroscopy. In order to reveal the adsorption mechanism of these species from their SERS spectra, Fourier‐transform Raman (FT‐RS) spectra of these nonadsorbed molecules were measured. By examining the enhancement, shift in wavenumbers, and changes in breadth of the SERS bands due to the adsorption process, we revealed that the tilted compounds interact with the colloidal silver substrate mainly through the benzene ring, amino group, and phosphinic moiety in the following way. The benzene ring of L² and L³ is ‘standing up’ on the colloidal silver surface, and the C N bond is almost vertical to it, while the tilt angle between the O PO bond and this surface is greater than 45°. On the other hand, for L¹, L⁴, and L⁵, the aromatic ring and C N bond are arranged more or less tilted, and the tilt angle between the O PO bond and the silver substrate is smaller than 45°. The elongation of the bond to the benzene ring, the L⁶ case, produces an almost horizontal orientation of the benzene ring and the O PO bond on the silver nanoparticles. For these ligands, the complement inhibition IC₅₀ tested in vitro using porcine kidney leucine aminopeptidase was correlated mainly with the behavior of the O PO and C CH N fragments on the silver surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy of 4‐tert‐butylpyridine on a silver electrode

We report the observation of large surface‐enhanced Raman scattering (SERS) (10⁶) for 4‐tert‐butylpyridine molecules adsorbed on a silver electrode surface in an electrochemical cell with electrode potential set at − 0.5 V. A decrease in electrode potential to − 0.3 V was accompanied by a decrease in relative intensities of the vibrational modes. However, there were no changes in vibrational wavenumbers. Comparison of both normal solution Raman and SERS spectra shows very large enhancement of the intensities of a₁, a₂, and b₂ modes at laser excitation of 488 nm. Enhancement of the non‐totally symmetric modes indicates the presence of charge transfer as a contributor to the enhancement. Copyright © 2011 John Wiley & Sons, Ltd.     

pH‐dependent surface‐enhanced Raman scattering studies of N‐acetylalanine monolayers self‐assembled on a silver surface

Monolayers of N‐acetylalanine on a metallic surface can serve as a biocompatible functional interface to construct biosensors. In the present paper, the surface‐enhanced Raman scattering (SERS) spectra of N‐acetylalanine monolayers self‐assembled on a silver surface under different pH were recorded. Assignments of the obtained spectra were carried out by density functional theory (DFT) calculations (BLYP/6‐311G). On the basis of the SERS effect, the nature of adsorption of N‐acetylalanine on a silver surface was deduced. It can be concluded that the fully protonated N‐acetylalanine is adsorbed on the silver surface via the imine group together with the carboxylate group, while it anchored onto the surface not only through both the imine and the carboxylate groups but also through the amide group after being completely deprotonated in the basic solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Application of calixarene to high active surface‐enhanced Raman scattering (SERS) substrates suitable for in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater

The characteristics of the sol–gel matrix embedding Ag nanoparticles functionalized with 25,27‐dimercaptoacetic acid‐26,28‐dihydroxy‐4‐tert‐butylcalix[4]arene (DMCX) suitable for the in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater is presented. The DMCX‐functionalized silver nanoparticles were produced by the thermal reduction method in xerogel film. The silver colloid blocks were formed in the sol–gel matrix, with a diameter ranging from 50 to 120 nm. DMCX forming the monolayer on the silver nanoparticle surface contributes to the surface‐enhanced Raman scattering (SERS) activity due to the aggregation of silver nanoparticles and the preconcentration of PAH molecules within the zone of electromagnetic enhancement. When selected, PAH molecules e.g. pyrene and naphthalene were adsorbed onto the SERS substrate; Raman band positions of PAH were slightly shifted. A calibration procedure reveals that this type of SERS substrate has a limit of detection of 3 × 10⁻¹⁰ mol/l for pyrene and 13 × 10⁻⁹ mol/l for naphthalene in artificial seawater. The Raman signal response on a pyrene concentration change in artificial seawater was evaluated using a 671‐nm Raman setup with a flow‐through cell. This type of SERS substrate will be suitable for the in situ trace detection of pollutant chemicals in seawater. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering‐based approach for DNA detection at low concentrations via polyvinyl alcohol‐protected silver grasslike patterns

A simple method is demonstrated to detect DNA at low concentrations on the basis of surface‐enhanced Raman scattering (SERS) via polyvinyl alcohol‐protected silver grasslike patterns (PVA‐Ag GPs) grown on the surface of the common Al substrate. By the SERS measurements of sodium citrate and thymine, the PVA‐Ag GPs are shown to be an excellent SERS substrate with good activity, stability and reproducibility. With the use of the tested molecule of thymine, the enhancement factor of the PVA‐Ag GPs is up to ~1.4 × 10⁸. The PVA‐Ag GPs are also shown to be an excellent SERS substrate with good biocompatibility for DNA detection, and the detection limit is down to ~10⁻⁵ mg/g. Meanwhile, the assignations of the Raman bands and the adsorption behaviors of the DNA molecules are also analyzed. In this work, the geometry optimization and the wavenumber analysis of adenine–Ag and guanine–Ag complexes for the ground states are performed using density functional theory, B3LYP functional and the LanL2DZ basis set. The transition energies and the oscillator strengths of adenine–Ag and guanine–Ag for the lowest six singlet excited states were calculated by using the time‐dependent density functional theory method with the same functional and basis set. The results show that the charge transfer in the adenine–Ag and guanine–Ag complexes should be the chemical factor for the SERS of the DNA molecules. Lastly, this method may be employed in large‐scale preparation of substrates that have been widely applied in the Raman analysis of DNA because the fabrication process is simple and inexpensive. Copyright © 2011 John Wiley & Sons, Ltd.     

IR,Raman and SERS spectra of 3,5‐dinitrosalicylic acid

IR, Raman and surface enhanced Raman scattering (SERS) spectra of 3,5‐dinitrosalicylic acid (DNSA) were recorded and analysed. The vibrational wavenumbers were computed by the ab initio method using RHF/6–21G* basis and they were found to be in good agreement with the experimental values. The effect of the concentration dependence on the SERS intensity of the molecule was studied. The molecular plane assumes a tilted orientation with respect to the silver surface. Copyright © 2006 John Wiley & Sons, Ltd.     

Theoretical elucidation of the origin of surface‐enhanced Raman spectra of PCB52 adsorbed on silver substrates

To better understand experimentally observed surface‐enhanced Raman Scattering (SERS) of polychlorinated biphenyls (PCBs) adsorbed on nanoscaled silver substrates, a systematic theoretical study was performed by carrying out density functional theory and time‐dependent density functional theory calculations. 2,2′,5,5′‐tetrachlorobiphenyl (PCB52) was chosen as a model molecule of PCBs, and Ag_n (n = 2, 4, 6, and 10) clusters were used to mimic active sites of substrates. Calculated normal Raman spectra of PCB52–Ag_n (n = 2, 4, 6, and 10) complexes are analogical in profile to that of isolated PCB52 with only slightly enhanced intensity. In contrast, the corresponding SERS spectra calculated at adopted incident light are strongly enhanced, and the calculated enhancement factors are 10⁴ ~ 10⁵. Thus, the experimentally observed SERS phenomenon of PCBs supported on Ag substrates should correspond to the SERS spectra rather than the normal Raman spectra. The dominant enhancement in Raman intensities origins from the charge transfer resonance enhancement between the molecule and clusters. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct observation of surface‐enhanced Raman scattering in ZnO nanocrystals

We have been able to observe the surface‐enhanced Raman scattering (SERS) from 4‐mercaptopyridine (4‐Mpy) molecules adsorbed on ZnO nanocrystals, which display 10³ enhancement factors (EFs). An excitation wavelength‐dependent behavior is clearly observed. Another molecule BVPP is also observed to have surface‐enhanced Raman signals. The chemical enhancement is most likely responsible for the observed enhancement, since plasmon resonances are ruled out. The research is important not only for a better understanding of the SERS mechanism, but also for extension of the application of Raman spectroscopy to a variety of adsorption problems on a semiconductor surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of Pb2+ on L‐glutathione monolayers on a silver surface investigated by surface‐enhanced Raman scattering spectroscopy

Surface‐enhanced Raman scattering (SERS) spectroscopy was applied to observe reduced L ‐glutathione [L‐Glut(R)] molecules self‐assembled on a silver surface and the effect of Pb²⁺ on them. The adsorption structure suggests that the mercapto group of the L‐Glut(R) molecule is covalently bonded to the silver surface along with the imine group, amino group and entire carboxyl group in a perpendicular orientation after self‐reorganization. Results of SERS experiment show that Pb²⁺ influences the structure of L‐glutathione monolayers as a result of the binding reaction possibly occurring between Pb²⁺ and the carboxyl and the amino groups. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface enhanced Raman spectroscopic (SERS) behavior of substituted propenoic acids used in heterogeneous catalytic asymmetric hydrogenation

The strength and geometry of adsorption of substituted propenoic acids on silver surface were studied by means of surface enhanced Raman spectroscopy (SERS) using silver sol. Based on their SERS behavior, two classes of phenylpropenoic acids studied were distinguished. The first class of propenoic acids (atropic acid, (E)‐2,3‐diphenylpropenoic acid, (E)‐2‐(2‐methoxyphenyl)‐3‐phenylpropenoic acid, (E)‐2,3‐di‐(4‐methoxyphenyl)phenylpropenoic acid and (E)‐2‐(2‐methoxyphenyl)‐3‐(4‐fluorophenyl)propenoic acid) has shown strong charge transfer (CT) effect. We suggest bidentate carboxyl bonded species based on the SERS enhanced bands of νCOO⁻ around 1394 cm⁻¹ and νC―C of the ―C―COO⁻ moiety at 951 cm⁻¹. In these series the plane of the α‐phenyl group (γCH out‐of‐plane vibrations at 850–700 cm⁻¹) is almost parallel to the silver surface, while the β‐phenyl group is in tilted position depending on the type and the position of substituent(s) showing strong SERS enhanced bands of νCC + βCH (in‐plane mode) at 1075 cm⁻¹, νCC (ring breathing mode, in‐plane) at 1000 cm⁻¹ and γCCC (out‐of‐plane mode) around 401 cm⁻¹. The other class of propenoic acids (cinnamic acid, (E)‐2‐phenyl‐3‐(4‐methoxyphenyl)propenoic acid) has shown weak electromagnetic (EM) enhancement (CC bands is enhanced in cinnamic acid). In this case no significant carboxyl enhancement was observed, so we suggest that adsorbed species lie parallel to the surface. The two types of adsorption can be related to the dissociation ability of the carboxylic group. In the first case the carboxylic H dissociates, while in the second case it does not, as indicated also by the characteristic νCO band at 1686 cm⁻¹ in the FT‐Raman spectra of methanolic solutions. Copyright © 2015 John Wiley & Sons, Ltd.     

Adsorption of neurotensin‐family peptides on SERS‐active Ag substrates

Kinetensin (KN) and its amino acids 1–8 fragment ([des‐Leu⁹]KN), neuromedin N (NMN), and xenopsin (XP) and its two analogs (XP‐1 and XP‐2) belong to the neurotensin family of peptides and are known to stimulate the growth of human tumors. In this work, we report Fourier transform‐Raman and surface‐enhanced Raman scattering (SERS) studies of these peptides and discuss their structures, orientation, and mode of adsorption onto a highly specific, electrochemically roughened SERS‐active Ag electrode that is characterized by the formation of a 50–150 nm Ag island on its surface. We show that the investigated peptides bind preferentially to this surface by substantial electronic overlap between the metal surface and the π‐orbitals of the benzene rings of the Phe, Tyr, and Trp residues, which forces them to take parallel or almost parallel orientations with respect to the surface. In addition, the –CH₂–, –CNH₂, and –COO^‐ molecular fragments are involved in interactions with (binding to or in close proximity with) the Ag surface. The SERS data show that the adsorption modes in each of these cases are very similar. In addition, we show that the specific differences in the amino acid sequences do not significantly affect the orientation of the investigated peptides on the Ag substrate. This result implies that the N‐termini of the neurotensin‐family peptides do not influence the mode for adsorption onto the Ag substrates. Copyright © 2012 John Wiley & Sons, Ltd.     

Adsorption of 4,4′‐thiobisbenzenethiol on silver surfaces: surface‐enhanced Raman scattering study

Adsorption of 4,4′‐thiobisbenzenethiol (4,4′‐TBBT) on a colloidal silver surface and a roughened silver electrode surface was investigated by means of surface‐enhanced Raman scattering (SERS) for the first time, which indicates that 4,4′‐TBBT is chemisorbed on the colloidal silver surface as dithiolates by losing two H‐atoms of the S H bond, while as monothiolates on the roughened silver electrode. The different orientations of the molecules on both silver surfaces indicate the different adsorption behaviors of 4,4′‐TBBT in the two systems. It is inferred from the SERS signal that the two aromatic rings in 4,4′‐TBBT molecule are parallel to the colloidal silver surface as seen from the disappearance of ν_{C H} band (3054 cm⁻¹), which is a vibrational mode to be used to determine the orientation of a molecule on metals according to the surface selection rule, while on the roughened silver electrode surface they are tilted to the surface as seen from the enhanced signal of ν_{C H}. The orientation of the C‐S bond is tilted with respect to the silver surface in both cases as inferred from the strong enhancement of the ν_{C S}. SERS spectra of 4,4′‐TBBT on the roughened silver electrode with different applied potentials reveal that the enhancement of 4,4′‐TBBT on the roughened silver electrode surface may be related to the chemical mechanism (CM). More importantly, the adsorption of 4,4′‐TBBT on the silver electrode is expected to be useful to covalently adsorb metal nanoparticles through the free S H bond to form two‐ or three‐ dimensional nanostructures. Copyright © 2007 John Wiley & Sons, Ltd.     

Self‐assembled silver nanoparticle monolayer on glassy carbon: an approach to SERS substrate

In this paper, the fabrication of an active surface‐enhanced Raman scattering (SERS) substrate by self‐assembled silver nanoparticles on a monolayer of 4‐aminophenyl‐group‐modified glassy carbon (GC) is reported. Silver nanoparticles are attached to the substrate through the electrostatic force between the negatively charged silver nanoparticles and the positively charged 4‐aminophenyl groups on GC. The active SERS substrate has been characterized by means of tapping‐mode atomic force microscopy (AFM), indicating that large quantities of silver nanoparticles are uniformly coated on the substrate. Rhodamine 6G (R6G) and p‐aminothiophenol (p‐ATP) are used as the probe molecules for SERS, resulting in high sensitivity to the SERS response, with the detection limit reaching as low as 10⁻⁹ M . This approach is easily controlled and reproducible, and more importantly, can extend the range of usable substrates to carbon‐based materials for SERS with high sensitivity. Copyright © 2007 John Wiley & Sons, Ltd.     

Rapid and simple detection of sodium thiocyanate in milk using surface‐enhanced Raman spectroscopy based on silver aggregates

Surface‐enhanced Raman spectroscopy (SERS) was used for rapid detection of sodium thiocyanate in milk employing silver aggregates as active substrate. Silver nanoparticles were induced to silver aggregates by trichloroacetic acid (TCA). The limit of detection (LOD) for sodium thiocyanate was 10⁻² µg ml⁻¹ in water with an analytical enhancement factor of 5.4 × 10⁶. The silver aggregates represent good reproducibility and stability. Good linear relationship was obtained for sodium thiocyanate in milk at concentration ranges from 0.1 to 10 µg ml⁻¹ (R² = 0.995). Using TCA as protein precipitator, silver colloid would aggregate spontaneously when mixing with samples during SERS measurement without the need of additional aggregating agent. The simple pretreatment procedures and analytical methods are less time consuming (<10 min) and environmentally friendly, making the proposed method much practical for in situ detection of sodium thiocyanate in market milk. Copyright © 2014 John Wiley & Sons, Ltd.     

Novel highly sensitive Cu‐based SERS platforms for biosensing applications

Novel surface enhanced Raman spectroscopy (SERS) platforms have been prepared and used for the bacteria detection. Unlike typical, expensive SERS platforms prepared from gold or silver, the presented platforms are prepared using copper. A new, simple, cost‐efficient and fast high pressure method is used for platform fabrication, through the decomposition of copper hydride. The platform enhancement factors are verified using the malachite green isothiocyanate as a standard. The platforms exhibit extremely high SERS enhancement factors depending on pressure used for their preparation. The calculated enhancement factors have been found in the range between 1.5 × 10⁶ and 4.6 × 10⁷. The SERS spectra reproducibility is established both across a single platform and among different platforms. The average spectral correlation coefficient (Γ) has been calculated to be 0.82. Fully characterized SERS platforms have then been used for detecting Staphylococcus aureus bacteria. These novel platforms have great potential to become excellent tools for biological or medical diagnostics as an alternative to more common silver or gold SERS platforms. Copyright © 2015 John Wiley & Sons, Ltd.     

DFT study and quantitative detection by surface‐enhanced Raman scattering (SERS) of ethyl carbamate

Ethyl carbamate (EC), a potentially toxic compound, is found in alcoholic beverages and fermented foodstuff. A combined experimental and theoretical study of Raman on EC is reported in this work for the first time. The Raman bands observed for EC in solid phase are characteristic for the carbonyl group, C―C, C―H and N―H stretching and deformation vibrations. These spectral features coupled with a pKa study allowed establishing the neutral species of EC present in the aqueous solutions experimentally tested at different concentrations. In addition, by performing a density functional theory study in the gas phase, the calculated geometry, the harmonic vibrational modes, and the Raman scattering activities of EC were found to be in good agreement with our experimental data and helped establish the surface‐enhanced Raman scattering (SERS) behavior and EC adsorption geometry on the silver surfaces. The Raman peak at 1006 cm⁻¹, assigned to the υ_s(CC) + ω(CH) modes, the strongest and best reproducible peak in the SERS spectra, was used for a quantitative evaluation of EC. The limit of detection, which corresponds to a signal‐to‐noise ratio equal to 3, was found to be 2 × 10⁻⁷ M (17.8 µg l⁻¹). SERS spectra obtained by using hydroxylamine hydrochloride‐reduced silver nanoparticles provide a fast and reproducible qualitative and quantitative determination of EC in aqueous solution. Copyright © 2013 John Wiley & Sons, Ltd.