A high‐throughput method for controlled hot‐spot fabrication in SERS‐active gold nanoparticle dimer arrays

We present a high‐throughput method for fabricating large arrays of surface‐enhanced Raman scattering (SERS) active gold dimers. Using a large‐area/low‐cost nanopatterning method in conjunction with a meniscus force deposition technique, we were able to create large arrays of uniformly spaced nanoclusters comprising two 60‐nm gold nanospheres. Raman measurements of a thiophenol monolayer deposited on smaller scale arrays of aligned dimers yielded enhancement factors as high as 10⁹. Polarization‐controlled measurements show spectral peak heights to be 10–100 times smaller when the incident beam is polarized perpendicularly to the dimer axis, confirming that the measured enhancements arise from the ‘hot spots’ between the two nanospheres. Copyright © 2009 John Wiley & Sons, Ltd.     

Fabrication and characterization of SERS‐active silver clusters on glassy carbon

In this article, a novel technique for the fabrication of surface enhanced Raman scattering (SERS) active silver clusters on glassy carbon (GC) has been proposed. It was found that silver clusters could be formed on a layer of positively charged poly(diallyldimethylammonium) (PDDA) anchored to a carbon surface by 4‐aminobenzoic acid when a drop containing silver nanoparticles was deposited on it. The characteristics of the obtained silver clusters have been investigated by atomic force microscopy (AFM), SERS and an SERS‐based Raman mapping technique in the form of line scanning. The AFM image shows that the silver clusters consist of several silver nanoparticles and the size of the clusters is in the range 80–100 nm. The SERS spectra of different concentrations of rhodamine 6G (R6G) on the silver clusters were obtained and compared with those from a silver colloid. The apparent enhancement factor (AEF) was estimated to be as large as 3.1 × 10⁴ relative to silver colloid, which might have resulted from the presence of ‘hot‐spots’ at the silver clusters, providing a highly localized electromagnetic field for the large enhancement of the SERS spectra of R6G. The minimum electromagnetic enhancement factor (EEF) is estimated to be 5.4 × 10⁷ by comparison with the SERS spectra of R6G on the silver clusters and on the bare GC surface. SERS‐based Raman mapping technique in the form of line scanning further illustrates the good SERS activity and reproducibility on the silver clusters. Finally, 4‐mercaptopyridine (4‐Mpy) was chosen as an analyte and the lowest detected concentration was investigated by the SERS‐active silver clusters. A concentration of 1.6 × 10⁻¹⁰ M 4‐Mpy could be detected with the SERS‐active silver clusters, showing the great potential of the technique in practical applications of microanalysis with high sensitivity. Copyright © 2006 John Wiley & Sons, Ltd.     

Immune recognition construct plasmonic dimer for SERS‐based bioassay

We have first time demonstrated the construction of a plasmonic gold dimer model for bioassays based on immune recognition with surface‐enhanced Raman scattering (SERS). To induce a strong plasmonic coupling effect, a dimer of gold nanoparticles (NPs) with a Raman label located between adjacent NPs is assembled through specific recognition in biological systems. One promising application for this model is the provision of a new type of in situ self‐calibrated and reliable SERS platform where biotinylated molecules can selectively be trapped by streptavidin and placed in the gap enhanced plasmonic field, which may enable the development of powerful, biospecific recognition‐based SERS assays. The capabilities of the dimeric constructions for analytical applications were demonstrated through the use of the SERS technique to detect biotin at very low concentrations. Additionally, the spatial SERS radiation for the gold dimer assembled on the silicon slide was simulated using the finite‐difference time‐domain method; this simulation demonstrated the distribution of the electric field as well as the utility of the proposed system, thereby introducing potential uses of bio‐specific recognition as well as opportunities for the construction of plasmonically coupled nanostructures and bioassay applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface enhanced Raman scattering of nano diamond using visible‐light‐activated TiO2 as a catalyst to photo‐reduce nano‐structured silver from AgNO3 as SERS‐active substrate

In this work, we demonstrate nano‐structured silver particles photo‐reduced from silver nitride (AgNO₃) solution using visible‐light‐activated titanium dioxide (TiO₂), which can be a convenient and effective substrate for surface enhanced Raman spectroscopy (SERS) observation. Visible‐light‐activated carbon‐containing TiO₂ nanoparticles are applied to photo‐reduce and form nano‐structured silver from AgNO₃ upon visible‐light illumination. Photo‐reduced nano‐structured silver is used as an active substrate for SERS studies of TiO₂ as well as nano diamond and TiO₂. The photo reduction of AgNO₃ and SERS observation can be obtained by simultaneously using the same visible laser excitation. The coexistence of the anatase phase with small admixture of the rutile phase in the TiO₂ can be observed using SERS. The carbon structure in the carbon‐containing TiO₂ was determined to be sp² type carbon bonding by SERS. Copyright © 2009 John Wiley & Sons, Ltd.     

Adsorption of neurotensin‐family peptides on SERS‐active Ag substrates

Kinetensin (KN) and its amino acids 1–8 fragment ([des‐Leu⁹]KN), neuromedin N (NMN), and xenopsin (XP) and its two analogs (XP‐1 and XP‐2) belong to the neurotensin family of peptides and are known to stimulate the growth of human tumors. In this work, we report Fourier transform‐Raman and surface‐enhanced Raman scattering (SERS) studies of these peptides and discuss their structures, orientation, and mode of adsorption onto a highly specific, electrochemically roughened SERS‐active Ag electrode that is characterized by the formation of a 50–150 nm Ag island on its surface. We show that the investigated peptides bind preferentially to this surface by substantial electronic overlap between the metal surface and the π‐orbitals of the benzene rings of the Phe, Tyr, and Trp residues, which forces them to take parallel or almost parallel orientations with respect to the surface. In addition, the –CH₂–, –CNH₂, and –COO^‐ molecular fragments are involved in interactions with (binding to or in close proximity with) the Ag surface. The SERS data show that the adsorption modes in each of these cases are very similar. In addition, we show that the specific differences in the amino acid sequences do not significantly affect the orientation of the investigated peptides on the Ag substrate. This result implies that the N‐termini of the neurotensin‐family peptides do not influence the mode for adsorption onto the Ag substrates. Copyright © 2012 John Wiley & Sons, Ltd.     

SERS‐based assays for sensitive detection of modafinil

In this paper, we proposed two sensitive surface‐enhanced Raman spectroscopy assays for the determination of modafinil in urine matrix. In the first assay, modafinil was extracted by solid phase extraction and determined after sandwiching with silver nanoparticles. In the second assay, modafinil was extracted by non‐specific interaction with magnetic gold nanoparticles and determined by sandwiching with magnetic gold and silver nanoparticles. The non‐specific magnetic extraction does not require any analyte specific agent like antibody, aptamer, or molecularly imprinted polymer, therefore, the cost and complexity of the assay is very low. Both assays are capable for application to urine samples with the detection limits under the minimum required performance limit of modafinil. The assays were validated in terms of accuracy, precision, detection limits, and ranges. Copyright © 2015 John Wiley & Sons, Ltd.     

Fabrication of NIR‐Excitable SERS‐Active Composite Particles Composed of Densely Packed Au Nanoparticles on Polymer Microparticles

A simple fabrication method is demonstrated for surface‐enhanced Raman scattering (SERS)‐active plasmonic nanoballs, which consisted of Au nanoparticles (NPs) and core–shell polystyrene and amino‐terminated poly(butadiene) particles, by heterocoagulation and Au NP diffusion. The amount of Au NPs introduced into the core–shell particles increases with the concentration of Au NPs added to the aqueous dispersion of the core–shell particles. When the amount of Au NPs increases, closely packed, three‐dimensionally arranged and close‐packed Au NPs arrays are formed in the shells. Strong SERS signals from para‐mercaptophenol adsorbed onto composite particles with multilayered Au NPs arrays are obtained by near‐infrared (NIR) light illumination.     

Au@SiO2 core/shell nanoparticle assemblage used for highly sensitive SERS‐based determination of glucose and uric acid

The use of Au@SiO₂ core/shell nanoparticle (NP) assemblage with highly sensitive surface‐enhanced Raman scattering (SERS) was investigated for the determination of glucose and uric acid in this study. Rhodamine 6G dye molecules were used to evaluate the SERS enhancement factor for the synthesized Au@SiO₂ core/shell NPs with various silica shell thicknesses. The enhancement of SERS signal from Rhodamine 6G was found to increase with a decrease in the shell thickness. The core/shell assemblage with silica layer of 1–2 nm over a Au NP of ~36 nm showed the highest SERS signal. Our results show that the SERS technique is able to detect glucose and uric acid within wide concentration ranges, i.e. 20 ng/dL to 20 mg/dL (10⁻¹²–10⁻³ M) and 16.8 ng/dL to 2.9 mg/dL (10⁻¹¹–1.72 × 10⁻⁴ M), respectively, with associated lower detection limits of ~20 ng/dL (~1.0 × 10⁻¹² M) and ~16.8 ng/dL (~1.0 × 10⁻¹¹ M). Our work offers a low‐cost route to the fabrication of agile sensing devices applicable to the monitoring of disease progression. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of molecules adsorbed on Co‐doped ZnO nanoparticles

Transition‐metal‐doped semiconductor nanoparticles (NPs) have been well studied for their optical and catalytic properties but seldom studied by surface‐enhanced Raman scattering (SERS). In this paper, transition‐metal‐doped semiconductor NPs are investigated for their SERS property. Four groups of Co‐doped (0.5, 1, 3, and 5%) ZnO (Co ZnO) NPs and pure ZnO NPs were synthesized and studied. When 4‐mercaptobenzoic acid was used as probing molecule, significant SERS signals were obtained on all the five samples. Moreover, it is very interesting to observe a relationship between the Co‐doping concentration and enhancement of the SERS signals. SERS intensities first increase with doping concentration (up to 1%), and then decrease with further increase in doping concentration (up to 5%). Charge transfer (CT) is considered to be the main contribution to this phenomenon. Different CT ratios from substrates to molecules seem to induce different intensities of the SERS signals. In our experiments, the crystalline defects of Co ZnO NPs caused by the Co dopant affect the CT ratios. A possible mechanism of CT from the valance band of Co ZnO NPs to the lower unoccupied molecular orbital of the molecules via energy of the surface states is suggested. X‐ray photoelectron spectra, UV vis spectra, and Raman spectra were used to characterize the structure and defects in Co ZnO NPs. Copyright © 2011 John Wiley & Sons, Ltd.     

A potential commercial surface‐enhanced Raman scattering–active substrate: stability and usability

In this article, a surface‐enhanced Raman scattering (SERS)–active substrate with great stability and usability is reported. It is composited with a two‐dimensional ordered array of Ag spherical caps and an aluminum coating. The ordered aluminum template formed during the synthesis of anodic aluminum oxide film was used as the patterned matrix. After sputtering a Ag layer and then peeling off the aluminum template, the patterned structure was replicated on Ag layer. The aluminum template could serve as a coating that protected Ag from being oxidized. Ultraviolet‐visible reflection measurement was performed to monitor the adsorption process of probing molecules. Taking 4‐mercaptopyridine as probing molecules, SERS spectra were investigated. Comparing with the ordinary Ag film, the patterned Ag layer exhibited better SERS activity. The convenience for preparing, storing, and using makes it a promising candidate for SERS application in the fast field analysis. Copyright © 2012 John Wiley & Sons, Ltd.     

Potential‐induced Raman behavior of individual (R)‐di‐2‐naphthylprolinol molecules on a Ag‐modified Ag electrode

The applicability of surface‐enhanced Raman spectroscopy is demonstrated to probe the adsorption behavior of individual molecules on a Ag electrode. High‐quality SERS spectra of (R)‐di‐2‐naphthylprolinol (DNP) were obtained from ultradilute solutions (10⁻¹² M ) on the Ag‐nanoparticle‐modified Ag electrode, which is attributed to the high electromagnetic (EM) effect of the SERS‐active system as well as to the strong adsorption and interaction of DNP molecules with Ag. The stable SERS spectra present remarkable potential dependence, which gives evidence for the behavior of individual DNP molecules on the Ag surface. Based on statistical analysis for the probability of DNP molecules located in ‘hot spots’, we propose an SERS mechanism for individual molecules in the electrode system, in combination with the hot‐spot model and orientation of the probe molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Photonic nanojet‐mediated SERS technique for enhancing the Raman scattering of a few molecules

We report a two‐step enhancement of Raman scattering signal (η) of a few dye molecules. In the first step, high‐quality surface‐enhanced Raman scattering (SERS) substrates have been used. The SERS substrates were fabricated by direct current sputtering of Au followed by thermal annealing. The role of thermal annealing of the SERS substrates and numerical aperture of Raman microscopic objective lens on the enhancement has been studied for optimizing the enhancement in the SERS technique. In the second step, the value of η obtained with conventional SERS technique has been improved significantly with the help of photonic nanojet (PNJ) of an optical microsphere (PNJ‐mediated SERS technique). The signal to noise ratio and reproducibility of the experimental results have been found to be very high. Based on our theoretical simulations on PNJ, a few suitable parameters have been proposed for obtaining better enhancement using this technique. To the best of our belief, this report will enable the SERS community to improve η value with ease. Copyright © 2016 John Wiley & Sons, Ltd.     

Destabilization of Thiolated Gold Clusters for the Growth of Single‐Crystalline Gold Nanoparticles and Their Self‐Assembly for SERS Detection

Thiolate‐protected gold nanoclusters with high chemical stability are exploited extensively for fundamental research and utility in chosen applications. Here for the first time, the controlled destabilization of extraordinarily stable thiolated gold clusters for the growth of single‐crystalline gold nanoparticles (AuNPs) is demonstrated, which was achieved simply via the oxidation of surface‐protecting thiolates into disulfides by hydrogen peroxide under basic condition. By combining with our experimental observations over the entire destabilization and growth process, the new growth mechanism from clusters to AuNPs is revealed by density functional theory (DFT) calculations. It is found that the size of AuNPs decreases with the increase of hydrogen peroxide concentration due to the generation of more nuclei at the higher hydrogen peroxide concentrations. In addition, the preparation of AuNPs is tuned by changing the concentration of hydrogen peroxide, and they are self‐assembled into microspheres via an evaporation‐mediated process, which can induce strong plasmonic coupling between adjacent AuNPs for ultrasensitive surface‐enhanced Raman scattering detection. The present work demonstrates a facile route to functionalize and engineer AuNPs via controlling the reaction conditions and the ratio of precursors, and thus bring new possibilities for using more clusters as precursors to construct novel nano/microstructures for various applications.     

Measurement of the absolute Raman scattering cross section of the 1584‐cm−1 band of benzenethiol and the surface‐enhanced Raman scattering cross section enhancement factor for femtosecond laser‐nanostructured substrates

The absolute Raman scattering cross section (σ_RS) for the 1584‐cm⁻¹ band of benzenethiol at 897 nm (1.383 eV) has been measured to be 8.9 ± 1.8 × 10⁻³⁰ cm² using a 785‐nm pump laser. A temperature‐controlled, small‐cavity blackbody source was used to calibrate the signal output of the Raman spectrometer. We also measured the absolute surface‐enhanced Raman scattering cross section (σ_SERS) of benzenethiol adsorbed onto a silver‐coated, femtosecond laser‐nanostructured substrate. Using the measured values of 8.9 ± 1.8 × 10⁻³⁰ and 6.6 ± 1.3 × 10⁻²⁴ cm² for σ_RS and σ_SERS respectively, we calculate an average cross‐section enhancement factor (EF) of 0.8 ± 0.3 × 10⁶. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of solid substrate on the SERS‐based immunoassay: a comparative study

A comparative study of the solid substrates used in surface‐enhanced Raman scattering (SERS) based immunoassay is made in this paper. Five different substrates were prepared and divided into two groups with and without SERS activity. They are (1) a poly‐L ‐lysine slide, (2) a glutaraldehyde (GA)‐aminosilane slide, (3) a substrate assembled with silver nanoparticles, (4) a substrate assembled with silver nanoparticles and functionalized with GA–aminosilane and (5) a substrate assembled with gold nanoparticles, of which the first two are substrates are without SERS activity and the latter three are with SERS activity because of the existence of the metallic nanoparticles. The SERS experimental results show that the immunoassay performed on an SERS‐active substrate is more effective than that employing the inactive substrate. Among the inactive substrates, the GA–aminosilane slide with a better ability for antibody immobilization leads to a more sensitive immunoassay than the poly‐L ‐lysine slide. Moreover, for SERS‐based immunoassay, the substrate with assembled silver nanoparticles has an advantage of higher SERS enhancement capacity over the substrate assembled with gold nanoparticles. This work indicates that SERS‐active substrates play important and positive roles in sensitive SERS‐based immunoassay. Copyright © 2010 John Wiley & Sons, Ltd.     

Silica‐overcoated substrates for detection of proteins by surface‐enhanced Raman spectroscopy

Ag film over nanosphere (AgFON) substrates for surface‐enhanced Raman spectroscopy (SERS) are shown to be ineffective for the detection of proteins in phosphate buffer solution (PBS) because of the decomposition of the substrate resulting in a total loss of SERS activity. However, modification of these substrates with SiO₂ overlayers overcomes this problem. The SiO₂ overlayers are produced by filtered arc deposition (FAD) and are characterised by atomic force microscopy (AFM). Their porosity is examined using Raman spectroscopy and the detection of cytochrome c and bovine serum albumin in PBS is successfully demonstrated. These findings show promise for the detection of proteins in biologically relevant conditions using Ag‐based SERS substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

A hybrid substrate for surface‐enhanced Raman scattering spectroscopy: coupling metal nanoparticles to strong localised fields on a micro‐structured surface

Electromagnetic coupling between localised plasmons on metal nanoparticles and the strong localised fields on a micro‐structured surface is demonstrated as a means to increase the enhancement factor in surface‐enhanced Raman scattering (SERS) spectroscopy. Au nanoparticles of diameter 20 nm were deposited on a micro‐structured Au surface consisting of a periodic array of square‐based pyramidal pits (Klarite). The spectra of 4‐aminothiophenol (4‐ATP) were compared before and after deposition of Au nanoparticles on the micro‐structured surface. The addition of Au nanoparticles is shown to provide significantly higher signal intensities, with improvements of the order of ∼10³ per molecule compared with spectra obtained from the micro‐structured substrate alone. This hybrid approach offers promise for combining nanoparticles with micro‐ and nano‐structured surfaces in order to design SERS substrates with higher sensitivities. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of ultrathin and compact Au@MnO2 nanoparticles for shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS)

Shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS) based on Au@SiO₂ or Au@Al₂O₃ nanoparticles (NPs) shows great potential to break the long‐standing limitations of substrate and surface generality of surface‐enhanced Raman scattering (SERS). However, the shell of SiO₂ or Al₂O₃ can easily be dissolved in alkaline media, which limits the applications of SHINERS in alkaline systems. Besides that, the synthesis of Au@SiO₂ NPs can be further simplified and Au@Al₂O₃ NPs be replaced by other NPs that are more amenable for mass production. In an attempt to make SHINERS NPs available in any systems practically, we report the synthesis of ultrathin and compact Au@MnO₂ NPs. The shell thickness of MnO₂ can be controlled down to about 1.2 nm without any pinhole. SHINERS based on such Au@MnO₂ NPs exhibits much higher Raman enhancement effect than Au@SiO₂ NPs and can be applied in alkaline systems in which Au@SiO₂ or Au@Al₂O₃ NPs cannot be applied. Copyright © 2011 John Wiley & Sons, Ltd.     

Understanding tip‐enhanced Raman spectra of biological molecules: a combined Raman,SERS and TERS study

Although conventional Raman, surface‐enhanced Raman (SERS) and tip‐enhanced Raman spectroscopy (TERS) have been known for a long time, a direct, thorough comparison of these three methods has never been carried out. In this paper, spectra that were obtained by conventional Raman, SERS (on gold and silver substrates) and TERS (in ‘gap mode’ with silver tips and gold substrates) are compared to learn from their differences and similarities. Because the investigation of biological samples by TERS has recently become a hot topic, this work focuses on biologically relevant substances. Starting from the TER spectra of bovine serum albumin as an example for a protein, the dipeptides Phe–Phe and Tyr–Tyr and the tripeptide Tyr–Tyr–Tyr were investigated. The major findings were as follows. (1) We show that the widely used assumption that spectral bands do not shift when comparing SER, TER and conventional Raman spectra (except due to binding to the metal surface in SERS or TERS) is valid. However, band intensity ratios can differ significantly between these three methods. (2) Marker bands can be assigned, which should allow one to identify and localize proteins in complex biological environments in future investigations. From our results, general guidelines for the interpretation of TER spectra are proposed. Copyright © 2012 John Wiley & Sons, Ltd.