FT‐Raman,FT‐IR spectra and DFT calculations on monomeric and dimeric structures of 5‐fluoro‐ and 5‐chloro‐salicylic acid

The experimental and theoretical study on the structures and vibrations of 5‐fluoro‐salicylic acid and 5‐chloro‐salicylic acid (5‐FSA and 5‐ClSA, C₇H₅FO₃ and C₇H₅ClO₃) is presented. The Fourier transform infrared spectra (4000–400 cm⁻¹) and the Fourier transform Raman spectra (4000–50 cm⁻¹) of the title molecules in the solid phase were recorded. The molecular structures, vibrational wavenumbers, infrared intensities, Raman intensities and Raman scattering activities were calculated for a pair of molecules linked by the intermolecular O H···O hydrogen bond. The geometrical parameters and energies of 5‐FSA and 5ClSA were obtained for all eight conformers/isomers from density functional theory (DFT) (B3LYP) with 6‐311++G(d,p) basis set calculations. The computational results identified the most stable conformer of 5‐FSA and 5‐ClSA as the C1 form. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The spectroscopic and theoretical results were compared with the corresponding properties for 5‐FSA and 5‐ClSA monomers and dimer of C1 conformer. The optimized bond lengths, bond angles and calculated wavenumbers showed the best agreement with the experimental results. Copyright © 2010 John Wiley & Sons, Ltd.     

Tunable n‐ and p‐type doping of single‐layer graphene by engineering its interaction with the SiO2 support

We report a technique to tune the excess charge concentration in single‐layer graphene from p‐ to n‐type up to densities of |n | ～ 1.2 × 10¹³ cm^–2, corresponding to a displacement electric field of ～2.5 V/nm. The tuning is achieved by engineering the interaction between graphene and the underlying Si/SiO₂ substrate with an amino group‐terminated self‐assembled monolayer, and subsequent rinsing in aqueous solutions at controlled pH. Raman spectroscopy and electrical measurements on treated graphene devices confirm the occurrence of doping. Interestingly, we found the field‐effect mobility not to be significantly affected by the procedure. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental and theoretical FT‐IR and FT‐Raman spectroscopic analysis of N1‐methyl‐2‐chloroaniline

In this work, the experimental and theoretical vibrational spectra of N1‐methyl‐2‐chloroaniline (C₇H₈NCl) were studied. FT‐IR and FT‐Raman spectra of the title molecule in the liquid phase were recorded in the region 4000–400 cm^?1 and 3500–50 cm^?1, respectively. The structural and spectroscopic data of the molecule in the ground state were calculated by using density functional method (B3LYP) with the 6‐311++G(d,p) basis set. The vibrational frequencies were calculated and scaled values were compared with experimental FT‐IR and FT‐Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. ¹³C and ¹H NMR chemical shifts results were compared with the experimental values. The optimized geometric parameters (bond lengths and bond angles) were given and are in agreement with the corresponding experimental values of aniline and p‐methyl aniline. Copyright © 2008 John Wiley & Sons, Ltd.     

Nanoscale C‐Rich SixC1−x Bus/Ring Waveguide Based Cross‐Wavelength Data Converter

The carbon‐rich silicon carbide (C‐rich Si_xC_1?x) micro‐ring channel waveguide with asymmetric core aspect is demonstrated for all‐optical cross‐wavelength pulsed return‐to‐zero on‐off keying (PRZ‐OOK) data conversion. Enhanced nonlinear optical Kerr switching enables 12‐Gbit per second data processing with optimized modulation depth. The inverse tapered waveguide at end‐face further enlarges the edge‐coupling efficiency, and the asymmetric channel waveguide distinguishes the polarization modes. To prevent data shape distortion, the bus/ring gap spacing is adjusted to control the quality factor (Q‐factor) of the micro‐ring. Designing the waveguide cross section at 500 × 350 nm² provides the C‐rich Si_xC_1?x channel waveguide to induce strong transverse electric mode (TE‐mode) confinement with a large Kerr nonlinearity of 2.44 × 10^?12 cm² W^?1. Owing to the trade‐off between the Q‐factor and the on/off extinction ratio, the optimized bus/ring gap spacing of 1400 nm is selected to provide a coupling ratio at 5–6% for compromising the modulation depth and the switching throughput. Such a C‐rich Si_xC_1?x micro‐ring with asymmetric channel waveguide greatly enhances the cross‐wavelength data conversion efficiency to favor its on‐chip all‐optical data processing applications for future optoelectronic interconnect circuits.     

Raman and surface‐enhanced Raman studies of α‐aminophosphinic inhibitors of metalloenzymes

Here, we report the nature of new di‐α‐amino (L¹–L³) and α‐amino‐α‐hydroxyphosphinic (L⁴–L⁶) acids, which are considered potential inhibitors of the aminopeptidase N, adsorbed on a colloidal silver surface by means of surface‐enhanced Raman scattering (SERS) spectroscopy. In order to reveal the adsorption mechanism of these species from their SERS spectra, Fourier‐transform Raman (FT‐RS) spectra of these nonadsorbed molecules were measured. By examining the enhancement, shift in wavenumbers, and changes in breadth of the SERS bands due to the adsorption process, we revealed that the tilted compounds interact with the colloidal silver substrate mainly through the benzene ring, amino group, and phosphinic moiety in the following way. The benzene ring of L² and L³ is ‘standing up’ on the colloidal silver surface, and the C N bond is almost vertical to it, while the tilt angle between the O PO bond and this surface is greater than 45°. On the other hand, for L¹, L⁴, and L⁵, the aromatic ring and C N bond are arranged more or less tilted, and the tilt angle between the O PO bond and the silver substrate is smaller than 45°. The elongation of the bond to the benzene ring, the L⁶ case, produces an almost horizontal orientation of the benzene ring and the O PO bond on the silver nanoparticles. For these ligands, the complement inhibition IC₅₀ tested in vitro using porcine kidney leucine aminopeptidase was correlated mainly with the behavior of the O PO and C CH N fragments on the silver surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering within silver‐nanoparticle‐decorated nanometric apertures

An analytical approach using enhanced Raman spectroscopy to record molecular vibrations and associated molecular images within nanometric apertures is presented, which can essentially rival or surpass its counterparts, i.e. fluorescence microscopy, by providing unique structure‐specific information forward to chemical identification and structure elucidation. Utilizing a precise nanolithographic technology and the following chemically electroless silver deposition procedure, we deliberately construct the large scale zero‐mode waveguide array in gold film with embossed silver nanostructures on the bottom of nanowells capable of acquiring enhanced Raman spectra with substantial sensitivity and high chemical fidelity. Two chemicals, aminothiophenol (4‐ATP) and Rhodamine 6G, respectively, are employed as molecular indicators to successfully demonstrate the capability of this analytical strategy by exhibiting high‐quality Raman spectra and 2D chemical‐specific images. With a high magnitude objective (60×), we enable to acquire Raman spectra from a single nanometric aperture and quantitatively determine a peak enhancement factor of 3.63 × 10⁵ for ATP, while 1.25 × 10⁶ to Rhodamine 6G, comparable with a regular nanoparticle‐based surface‐enhanced Raman spectroscopy‐active substrate. Overall, the compelling characteristics of this detection scheme highlight its privileges for interrogating the individual molecular behavior in extremely confined geometry and illustrating the chemical insights of trace components without any labeling reagent and extra sample preparation. Copyright © 2013 John Wiley & Sons, Ltd.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

DFT study and quantitative detection by surface‐enhanced Raman scattering (SERS) of ethyl carbamate

Ethyl carbamate (EC), a potentially toxic compound, is found in alcoholic beverages and fermented foodstuff. A combined experimental and theoretical study of Raman on EC is reported in this work for the first time. The Raman bands observed for EC in solid phase are characteristic for the carbonyl group, C―C, C―H and N―H stretching and deformation vibrations. These spectral features coupled with a pKa study allowed establishing the neutral species of EC present in the aqueous solutions experimentally tested at different concentrations. In addition, by performing a density functional theory study in the gas phase, the calculated geometry, the harmonic vibrational modes, and the Raman scattering activities of EC were found to be in good agreement with our experimental data and helped establish the surface‐enhanced Raman scattering (SERS) behavior and EC adsorption geometry on the silver surfaces. The Raman peak at 1006 cm⁻¹, assigned to the υ_s(CC) + ω(CH) modes, the strongest and best reproducible peak in the SERS spectra, was used for a quantitative evaluation of EC. The limit of detection, which corresponds to a signal‐to‐noise ratio equal to 3, was found to be 2 × 10⁻⁷ M (17.8 µg l⁻¹). SERS spectra obtained by using hydroxylamine hydrochloride‐reduced silver nanoparticles provide a fast and reproducible qualitative and quantitative determination of EC in aqueous solution. Copyright © 2013 John Wiley & Sons, Ltd.     

On the potential of Raman‐spectroscopy‐based carbonate mass spectrometry

The potential for using Raman spectroscopy to measure stable oxygen isotope ratios (¹⁸O/¹⁶O) in carbonates is evaluated by measuring the Raman spectra and isotope ratios of a suite of 60 synthesized, ¹⁸O‐enriched calcite crystals ranging in composition from natural abundance (0.2 mole‐% ¹⁸O) to 1.2 mole‐% ¹⁸O. We determined the Raman‐inferred isotopic ratios (R_Raman) by fitting curves to the ν₁ symmetric stretching peak at 1086 cm⁻¹ and the smaller satellite peak, associated with the ν₁ stretching mode of singly substituted carbonate groups (C¹⁶O₂¹⁸O) at 1065 cm⁻¹. The ratio of the two peak areas shows a 1:1 correspondence with the ¹⁸O/¹⁶O ratios derived from standard mass spectrometry methods, confirming that the relative intensities of the ν₁ symmetric stretching peaks is a direct measure of the isotopic ratio in the carbonates. The 1‐sigma uncertainties of the R_Raman values of the individual crystals were 0.00079 (384‰ PDB) and 0.00043 (210‰ PDB) for the four‐crystal sample means. This level of uncertainty is much too high to provide significant estimates of natural variability; however, there are multiple prospects for improving the accuracy and precision of the technique. Carbon isotope ratios in carbonates cannot be measured by our approach, but our results highlight the potential of Raman‐based isotope ratio measurement for C and other elements in minerals and organic compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Direct observation of p,p′‐dimercaptoazobenzene produced from p‐aminothiophenol and p‐nitrothiophenol on Cu2O nanoparticles by surface‐enhanced Raman spectroscopy

Surface‐enhanced Raman scattering of p‐aminothiophenol and p‐nitrothiophenol were obtained on the surface of Cu₂O nanoparticles, showing novel spectral changes with morphology‐dependent and time‐dependent characteristics. The measured Raman signals were believed to partly originate from the newly produced surface species p,p′‐dimercaptoazobenzene. The nature of surface chemisorption status during Raman measurement was investigated experimentally and theoretically via combined surface‐enhanced Raman scattering and density functional theory study, indicating that surface catalytic reaction of p‐aminothiophenol and p‐nitrothiophenol could take place on the surface of oxide nanostructures as well as coinage metal material. Copyright © 2013 John Wiley & Sons, Ltd.     

FT‐IR,FT‐Raman,SERS spectra and computational calculations of 4‐ethyl‐N‐(2′‐hydroxy‐5′‐nitrophenyl)benzamide

Fourier transform infrared (FT‐IR) and FT‐Raman spectra of 4‐ethyl‐N‐(2′‐hydroxy‐5′‐nitrophenyl)benzamide were recorded and analyzed. A surface‐enhanced Raman scattering (SERS) spectrum was recorded in silver colloid. The vibrational wavenumbers and corresponding vibrational assignments were examined theoretically using the Gaussian03 set of quantum chemistry codes. The red shift of the NH stretching wavenumber in the infrared spectrum from the computational wavenumber indicates the weakening of the NH bond resulting in proton transfer to the neighboring oxygen atom. The simultaneous IR and Raman activation of the CO stretching mode gives the charge transfer interaction through a π‐conjugated path. The presence of methyl modes in the SERS spectrum indicates the nearness of the methyl group to the metal surface, which affects the orientation and metal molecule interaction. The first hyperpolarizability and predicted infrared intensities are reported. The calculated first hyperpolarizability is comparable with the reported values of similar derivatives and is an attractive subject for future studies of nonlinear optics. Optimized geometrical parameters of the title compound are in agreement with reported structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Defect removal after low temperature annealing of boron implantations by emitter etch‐back for silicon solar cells

Ion implantation offers new possibilities for silicon solar cell production, e.g. single side doping that can be structured in‐situ with shadow masks. While phosphorus implantations can easily be annealed at low temperature, the annealing of boron implantations is challenging. In this study, we use low energy implantations of boron (1 keV and 5 keV) with a projected range of 5.6 nm and 21.2 nm that form defects causing charge carrier recombination after a low temperature anneal (950 °C, 30 min). An ozone‐based wet chemical etching step is applied to remove this near surface damage. With increasing chemical etch‐back the electrical quality (i.e. emitter saturation current density, J_0e) improves continuously. The calculated limit for J_0e was reached with an abrasion of 35 nm for 1 keV and 85 nm for 5 keV implantations, showing that the relevant defects causing charge carrier recombination are located very close to the surface, corresponding to the as‐implanted profile depth. This emitter etch‐back allows for the fabrication of defect free boron doping profiles with good sheet resistance uniformity (standard deviation <2%). With the resulting characteristics (sheet resistance <100 Ω/sq, surface doping concentration >5 × 10¹⁹ cm^–3, J_0e < 30 fA/cm²), these boron profiles are well suited for silicon solar cells. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Computational study on structures,thermochemical properties,and bond energies of disulfide oxygen (S–S–O)‐bridged CH3SSOH and CH3SS(=O)H and radicals

Cleavage of disulfide bonds is a common method used in linking peptides to proteins in biochemical reactions. The structures, internal rotor potentials, bond energies, and thermochemical properties (Δ_fH°, S°, and Cp(T)) of the S–S bridge molecules CH₃SSOH and CH₃SS(=O)H and the radicals CH₃SS?=O and C?H₂SSOH that correspond to H‐atom loss are determined by computational chemistry. Structure and thermochemical parameters (S° and Cp(T)) are determined using density functional Becke, three‐parameter, Lee–Yang–Parr (B3LYP)/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p). The enthalpies of formation for stable species are calculated using the total energies at B3LYP/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p), and the higher level composite CBS–QB3 levels with work reactions that are close to isodesmic in most cases. The enthalpies of formation for CH₃SSOH, CH₃SS(=O)H are ?38.3 and ?16.6 kcal mol^?1, respectively, where the difference is in enthalpy RSO–H versus RS(=O)–H bonding. The C–H bond energy of CH₃SSOH is 99.2 kcal mol^?1, and the O–H bond energy is weaker at 76.9 kcal mol^?1. Cleavage of the weak O–H bond in CH₃SSOH results in an electron rearrangement upon loss of the CH₃SSO–H hydrogen atom; the radical rearranges to form the more stable CH₃SS· = O radical structure. Cleavage of the C–H bond in CH₃SS(=O)H results in an unstable [CH₂SS(=O)H]* intermediate, which decomposes exothermically to lower energy CH₂ = S + HSO. The CH₃SS(=O)–H bond energy is quite weak at 54.8 kcal mol^?1 with the H–C bond estimated at between 91 and 98 kcal mol^?1. Disulfide bond energies for CH₃S–SOH and CH3S–S(=O)H are low: 67.1 and 39.2 kcal mol^?1. Copyright © 2011 John Wiley & Sons, Ltd.     

Multiple weak interaction‐assisted SERS detection platform for triadimefon

In this paper, a surface enhanced Raman spectra (SERS) detection platform for the widely used pesticide of triadimefon (TDF) is described. TDF is difficult to connect to the gold/silver SERS substrate, but the optical properties of the probe molecule 4‐mercaptobenzoic acid (4‐MBA), including the peak intensity and the peak position, are easily altered by the multiple weak interaction‐assisted SERS detection platform. The limit of detection (LOD) of this method is 1.0 × 10^‐9 M, and the linear range is from 1.0 × 10^‐6 M to 1.0 × 10^‐9 M. The linear region is from 1.0 × 10^‐6 M to 1.0 × 10^‐9 M, described by the equation y = 884.01x + 2.24 with a correlation coefficient (R²) of 0.9990. Interference of foreign metal ions with higher concentrations than common mineral water is too weak to the determination. Furthermore, physical insights into the phenomena and the detection mechanism were obtained and investigated theoretically. The preferential conformation of the complex and reduced density gradient (RDG) calculation results indicated that the interactions between TDF and 4‐MBA consisted of multiple weak interactions through two hydrogen bonds and one van der Waals interaction. The intermolecular interaction was negative for the charge transfer from the SERS substrate to the probe molecule; thus, the peak intensity decreased. TDF interacts directly with the carboxyl of the probe molecule and consequently has an effect on the ring vibrations. Copyright © 2014 John Wiley & Sons, Ltd.     

High‐mobility flexible thin‐film transistors with a low‐temperature zirconium‐doped indium oxide channel layer

Thin film transistors (TFTs) with zirconium‐doped indium oxide (ZrInO) channel layer were successfully fabricated on a flexible PEN substrate with process temperature of only 150 °C. The flexible ZrInO TFT exhibited excellent electrical performance with a saturation mobility of as high as 22.6 cm² V^–1 s^–1, a sub‐threshold swing of 0.39 V/decade and an on/off current ratio of 2.5 × 10⁷. The threshold voltage shifts were 1.89 V and ?1.56 V for the unpassivated flexible ZrInO TFT under positive and negative gate bias stress, respectively. In addition, the flexible ZrInO TFT was able to maintain the relatively stable performance at bending curvatures larger than 20 mm, but the off current increased apparently after bent at 10 mm. Detailed studies showed that Zr had an effect of suppress the free carrier generation without seriously distorting the In₂O₃ lattice. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Germanium – the superior dopant in n‐type GaN

We present an experimental study about the influence of Si and Ge doping in GaN with focus on the occurring strain levels and overall crystalline quality. Extremely high quality samples were examined by means of Raman spectroscopy, demonstrating effective, n‐type doping concentrations up to the 5 × 10¹⁹ cm^–3 regime. By studying the full width at half maximum (FWHM) of the E₂(high) Raman mode with rising doping concentration, Ge is approved as the by far superior dopant if compared to Si. Even elevated nominal Ge concentrations yield corresponding FWHM values of just 3 cm^–1, a most competitive value even for bare bulk GaN samples. At the same time, the biaxial, compressive stress that is introduced by such high Ge doping amounts to just 0.2 GPa, in clear contrast to the particular case of silicon. Here, even moderate doping levels lead to tensile stress up to 1 GPa and consequently to a serious degeneration of the overall crystal quality as approved by our Raman analysis. Additionally, the examined high doping concentrations enable the observation of longitudinal optical phonon plasmon (LPP) modes in the Raman spectra, which serve as a direct tool for the determination of the effective doping concentration. A careful analysis of the LPP coupling at cryogenic and room temperature yields within the error interval identical free carrier concentrations in all germanium doped samples, pointing towards an energetically shallow nature of the dopant. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Structural variation in a synchrotron‐induced contamination layer (a‐C:H) deposited on a toroidal Au mirror surface

A carbon layer deposited on an optical component is the result of complex interactions between the optical surface, adsorbed hydrocarbons, photons and secondary electrons (photoelectrons generated on the surface of optical elements). In the present study a synchrotron‐induced contamination layer on a 340 mm × 60 mm Au‐coated toroidal mirror has been characterized. The contamination layer showed a strong variation in structural properties from the centre of the mirror to the edge region (along the long dimension of the mirror) due to the Gaussian distribution of the incident photon beam intensity/power on the mirror surface. Raman scattering measurements were carried out at 12 equidistant (25 mm) locations along the length of the mirror. The surface contamination layer that formed on the Au surface was observed to be hydrogenated amorphous carbon film in nature. The effects of the synchrotron beam intensity/power distribution on the structural properties of the contamination layer are discussed. The I(D)/I(G) ratio, cluster size and disordering were found to increase whereas the sp²:sp³ ratio, G peak position and H content decreased with photon dose. The structural parameters of the contamination layer in the central region were estimated (thickness ? 400 Å, roughness ? 60 Å, density ? 72% of bulk graphitic carbon density) by soft X‐ray reflectivity measurements. The amorphous nature of the layer in the central region was observed by grazing‐incidence X‐ray diffraction.     

The mechanism of the homogeneous,unimolecular gas‐phase elimination kinetic of 1,1‐dimethoxycyclohexane: experimental and theoretical studies

The gas‐phase elimination of 1,1‐dimethoxycyclohexane yielded 1‐methoxy‐1‐cyclohexene and methanol. The kinetics were determined in a static system, with the vessels deactivated with allyl bromide, and in the presence of the free radical inhibitor cyclohexene. The working temperature was 310–360 °C and the pressure was 25–85 Torr. The reaction was found to be homogeneous, unimolecular, and follows a first‐order rate law. The temperature dependence of the rate coefficients is given by the following Arrhenius equation: log k(s^?1) = [(13.82 ± 0.07) – (193.9 ± 1.0)(kJ mol^?1)](2.303RT)^?1; r = 0.9995. Theoretical calculations were carried out using density functional theory (DFT) functionals B3LYP, MPW1PW91, and PBE with the basis set 6‐31G(d,p) and 6‐31G++(d,p). The calculated values for the energy of activation and enthalpy of activation are in reasonably good agreement with the experimental values using the PBE/6‐31G (d,p) level of theory. Both experimental results and theoretical calculations suggest a molecular mechanism involving a concerted polar four‐membered cyclic transition state. The transition state structure of methanol elimination from 1,1‐dimethoxycyclohexane is characterized by a significantly elongated C? O bond, while the C_β? H bond is stretched to a smaller extent, as compared to the reactant. The process can be described as moderately asynchronic with some charge separation in the TS. Copyright © 2010 John Wiley & Sons, Ltd.     

Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

Measurement of the third‐order nonlinear optical susceptibility χ(3) for the 1002‐cm–1 mode of benzenethiol using coherent anti‐Stokes Raman scattering with continuous‐wave diode lasers

The components of the third‐order nonlinear optical susceptibility χ⁽³⁾ for the 1002‐cm^–1 mode of neat benzenethiol have been measured using coherent anti‐Stokes Raman scattering with continuous‐wave diode pump and Stokes lasers at 785.0 and 852.0 nm, respectively. Values of 2.8 ± 0.3 × 10^–12, 2.0 ± 0.2 × 10^–12, and 0.8 ± 0.1 × 10^–12 cm·g^–1·s² were measured for the xxxx, xxyy, and xyyx components of |3χ⁽³⁾|, respectively. We have calculated these quantities using a microscopic model, reproducing the same qualitative trend. The Raman cross‐section σ_RS for the 1002‐cm^–1 mode of neat benzenethiol has been determined to be 3.1 ± 0.6 × 10^–29 cm² per molecule. The polarization of the anti‐Stokes Raman scattering was found to be parallel to that of the pump laser, which implies negligible depolarization. The Raman linewidth (full‐width at half‐maximum) Γ was determined to be 2.4 ± 0.3 cm^–1 using normal Stokes Raman scattering. The measured values of σ_RS and Γ yield a value of 2.1 ± 0.4 × 10^–12 cm·g^–1·s² for the resonant component of 3χ⁽³⁾. A value of 1.9 ± 0.9 × 10^–12 cm·g^–1·s² has been deduced for the nonresonant component of 3χ⁽³⁾. Copyright © 2011 John Wiley & Sons, Ltd.