Facile morphology‐controlled hydrothermal synthesis of flower‐like self‐organized ZnO architectures

Flower‐like self‐organized crystalline ZnO architectures were obtained through a facile and controlled hydrothermal process. As‐synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), X‐ray diffraction (XRD), electron diffraction and UV‐Vis spectroscopy. XRD and electron diffraction results confirmed the obtained materials are pure wurtzite ZnO. The effects of different ratios of starting materials and solvent on the morphologies of ZnO hydrothermal products were also evaluated by SEM observations. It is suggested that the use of water, rather than ethanol as the solvent, as well as employing a precursor of Zn(Ac)₂ and 2NaOH (v/v) in hydrothermal reactions are responsible for the generation of specific flower‐like self‐assembled ZnO structures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Morphology‐photocatalytic properties‐growth mechanism for ZnO nanostructures via microwave‐assisted hydrothermal synthesis

ZnO nanostructures with various morphologies including rod‐like, sheet‐like, needle‐like and flower‐like structures were successfully synthesized via a fast and facile microwave‐assisted hydrothermal process. Reaction temperature, reaction time and the addition of NaOH were adjusted to obtain ZnO with different morphologies. Scanning electron microscopy(SEM), transmission electron microscope(TEM), X‐ray diffraction (XRD) and ultraviolet spectrophotometer (UV) were used to observe the morphology, crystal structure, ultraviolet absorption and photocatalytic activity of the obtained ZnO. The results indicated that growth rate of ZnO nanostructure along [001] direction was more sensitive to temperature compared with those along [101] and [100] directions. The competition between anionic surfactant and OH⁻ played an important role in the formation of ZnO with various morphologies. Flower‐like ZnO had better ultraviolet absorption property and excellent photocatalytic activity than ZnO in the other morphologies. On the basis of the above results, a possible growth mechanism for the formation of ZnO nanostructures with different morphologies was described.     

Low temperature hydrothermal growth and optical properties of ZnO nanorods

Well‐faceted hexagonal ZnO nanorods have been synthesized by a simple hydrothermal method at relative low temperature (90°C) without any catalysts or templates. Zinc oxide (ZnO) nanorods were grown in an aqueous solution that contained Zinc chloride (ZnCl₂, Aldrich, purity 98%) and ammonia (25%). Most of the ZnO nanorods show the perfect hexagonal cross section and well‐faceted top and side surfaces. The diameter of ZnO nanorods decreased with the reaction time prolonging. The samples have been characterized by X‐ray powder diffraction (XRD) and scanning electron microscopy (SEM) measurement. XRD pattern confirmed that the as‐prepared ZnO was the single‐phase wurtzite structure formation. SEM results showed that the samples were rod textures. The surface‐related optical properties have been investigated by photoluminescence (PL) spectrum and Raman spectrum. Photoluminescence measurements showed each spectrum consists of a weak band ultraviolet (UV) band and a relatively broad visible light emission peak for the samples grown at different time. It has been found that the green emission in Raman measurement may be related to surface states. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Shape‐controlled synthesis of ZnO architectures

Several ZnO nanoarchitectures have been selectively prepared through hydrothermal method including urchin‐shaped, flower‐shaped, butterfly‐shaped, and cacti‐shaped microstructures. The influence of reaction temperature and the concentration of amphiphilic copolymer on the morphologies and shapes of ZnO samples have been studied. The samples were characterized using XRD, TEM, and SEM. It was found that ZnO nanorods or their assemblies were fabricated at higher temperature, whereas ZnO nanosheet architectures were produced at lower temperature. These flower‐shaped architectures possess high BET surface area of 27.43 m²/g. Room temperature UV‐VIS and PL spectra of the as‐obtained ZnO nanoarchitectures have been examined. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Cuprous oxide microcrystals via hydrothermal approach: morphology evolution and photocatalytic properties

Cuprous oxide (Cu₂O) microcrystals with various morphologies were prepared under mild hydrothermal condition. The samples were characterized by means of XRD, SEM, and UV/DRS. The morphology of the as‐prepared Cu₂O microcrystals typically had cubic symmetry and the morphology evolution from radial, six hollow branches to truncated octahedra (again cubic) were realized by adding acetic acid. The peak relative intensity of XRD pattern shows that the exposed planes of samples is consistent with their morphology. A possible growth mechanism of Cu₂O microcrystals is also proposed. The behavior of adsorption and photocatalysis of Cu₂O microcrystals was investigated by degrading methyl orange (MO) in aqueous solution. The results show that the as‐prepared Cu₂O radial six hollow branches microcrystals with exposed {110} planes have higher degradation efficiency to methyl orange (MO) than cubic ones with exposed {100} planes and truncated octahedral with exposed {111} planes microcrystals.     

Relationship between morphology and structure of shape‐controlled CeO2 nanocrystals synthesized by microwave‐assisted hydrothermal method

The influence of synthesis conditions on morphology and structure of CeO₂ nanocrystals prepared by microwave‐assisted hydrothermal method were studied by XRD, TEM, Raman spectroscopy and photoluminescence measurements. Decisive effect of the OH^‐/Ce³⁺ molar ratio in the reaction mixture on the size and shape of CeO₂ nanocrystals was established and explained. Rise of the concentration of OH^‐ groups at the surface of growing CeO₂ nanocrystals promotes shape transformation from irregular (spheroidal) to cube and enables oriented attachment mode of particle growth. I was found that the unit cell parameter and intensity of Ce³⁺ defect related band in the luminescence and Raman spectra in ceria nanoparticles increase as follows: irregular shape nanocrystals < large cube < small primary cube shape particles. The reason is growing contribution of total subsurface volume under {100} faces, exposed by ceria nanocubes, where enhanced concentration of Ce³⁺ and oxygen vacancies occur.     

Facile synthesis of pencil‐like ZnO nanostructures at low temperature

Pencil‐like ZnO nanostructure was synthesized by directly oxidizing granular Zn films, which was thermal deposited in a nitrogen atmosphere from Zn powder in a horizontal tube furnace. The formation of the pencil‐like structure, including a hexagonal rod and a sharp tip with diameter about 60 nm, highly depend on the thickness of the initial zinc film and the temperature of the oxidizing process. ZnO nanorods were formed in a relatively low temperature, while thicker zinc film was apt to form a dense ZnO film with tubular structures. The different structured ZnO materials showed distinguishing optical properties which indicate the intrinsic defects forming in the different growth conditions. The pencil‐like ZnO structures exhibit a relatively strong green emission attributed to the high concentrations of oxygen vacancies and its taper tip has great prospects in field‐emission devices.     

Low temperature synthesis of spindle‐like ZnO nanostructures under microwave irradiation

A simple and general microwave route is developed to synthesize nanostructured ZnO using Zn(acac)₂·H₂O (acac = acetylacetonate) as a single source precursor. The reaction time has a great influence on the morphology of the ZnO nanostructures and an interesting spindle‐like nanostructure is obtained. The microstructure and morphology of the synthesized materials are investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). It is found that all of them with hexagonal wurtzite phase are of single crystalline structure in nature. Ultraviolet–visible (UV‐vis) absorption spectra of these ZnO nanostructures are investigated and a possible formation mechanism for the spindle‐like ZnO nanostructures is also proposed.     

Low‐temperature preparation of bismuth ferrite microcrystals by a sol‐gel‐hydrothermal method

Well‐crystallized pure perovskite bismuth ferrite (BiFeO₃) powders with various morphologies have been synthesized by a novel sol‐gel‐hydrothermal route for the first time, which combined the conventional sol‐gel process and the hydrothermal method. The as‐prepared samples were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), differential thermal analysis (DTA) and ferroelectric test system. The results revealed that the compositions, morphological and dimensional changes in bismuth ferrite samples synthesized by sol–gel–hydrothermal method strongly depend on the concentrations of mineralizer. Ferroelectric hysteresis loops are displayed in the BiFeO₃ samples. The bismuth ferrites were hydrothermally synthesized at as low a temperature as 180 °C, which is comparatively lower than that synthesized by the normal sol–gel route. The formation mechanism of the bismuth ferrite crystalline was also discussed. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and growth mechanism of ZnO rod‐like nanostructures by a microwave‐assisted low‐temperature aqueous solution route

A zinc oxide (ZnO) nanoarray (rod‐like nanostructure) was successfully synthesized through a low‐temperature aqueous solution and microwave‐assisted synthesis using zinc nitrate hexahydrate (Zn(NO₃)₂·6H₂O) and hexamethylenetetramine (HMTA) as raw materials, and using FTO glass as substrate. The effects of parameters in the preparation process, such as solution concentration, reaction temperature and microwave power, on the morphology and microstructure of ZnO nanoarray were studied. Phase structure and morphology of the products were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The results indicated that hexagonal wurtzite structure ZnO nanoarray with good crystallization could be prepared through a low‐temperature solution method. When the concentration of the mixed solution was 0.05 M, the reaction temperature was 95 °C, and the reaction time was 4 h, high‐density ZnO regular nanorods of 200 nm diameter were obtained. A possible mechanism with different synthesis methods and the influence of microwave processing are also proposed in this paper.     

Unique morphologies of zinc oxide synthesized by thermal decomposition and co‐precipitation routes: Ultraviolet absorption and luminescence characteristics

Two facile and efficient methods, to synthesize zinc oxide (ZnO) particles with different morphologies, have been reported here. Thermal decomposition route yielded micron sized irregular shaped ZnO particles. While co‐precipitation method rendered transparent flakes which then transformed to hexagonal discs with relatively more uniform size and shape. These hexagonal discs were further converted to the cone type morphology when hexamethylenetetramine was added in the precursor solution. However, spherical type ZnO nanoparticles were obtained by incorporating polyvinyl alcohol during co‐precipitation strategy. XRD confirmed the formation of wurtzite structure in all the samples. FTIR spectroscopy revealed the presence of ZnO characteristic peaks. Moreover, 3‐D directional growths and the presence of UV‐Vis broadband multi‐absorption peaks, and green to orange photoluminescence emissions confirmed the potential application of the synthesized ZnO particles in various piezoelectric and luminescence applications.

     

辅助水热法制备不同形貌的柱状ZnO微晶

本文采用乙醇辅助水热法制备得到了柱状ZnO微晶.得到的微晶形貌多样,有单脚、三脚、四脚、五脚、六脚以及多脚状,并以"骨架+支架"模型进行解释.X射线衍射分析结果表明产物为纯的六方相纤锌矿结构,扫描电子显微镜(SEM)观察表明产物具有单晶属性.本文还研究了ZnO的室温光谱性能.     

EDTA‐assisted synthesis of rose‐like ZnO architectures

Rose‐like ZnO nanostructures were prepared by a low‐temperature solution route with assistance of ethylenediaminetetraacetic acid disodium (EDTA‐2Na). The morphology of ZnO nanostructures was found to change from nanowire arrays to rose‐ and tower‐like architectures with increasing the molar ratio of EDTA‐2Na/Zn²⁺. Also, the shape evolution of ZnO nanostructures with time was observed from flat nanosheets to wrinkled nanosheets and to rose‐like nanostructures. EDTA‐2Na as a strong complexing agent was found to play a key role in the shape evolution. Photoluminescence spectra show that the rose‐like ZnO architectures have more defects than the nanowire arrays. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ionic liquid‐assisted hydrothermal synthesis of γ‐Al2O3hierarchical nanostructures

The boehmite (Al₂O₃·H₂O) hierarchical nanostructure with spindle‐like morphology has been successfully synthesized via ionic liquid‐assisted hydrothermal synthetic method under mild condition using an ionic liquid 1‐butyl‐3‐dimethylimidazolium bromide ([Bmim][Br]) as a template. The proposed formation mechanism has been investigated and the hydrogen bond‐co‐π–π stack mechanism is used to be responsible for the present formation of the precursor hierarchical nanostructure. The γ‐Al₂O₃ hierarchical nanostructure was obtained by calcining the as‐synthesized precursor at 500 °C for 2 h, preserving the same morphology. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Vapour‐phase growth,purification and large‐area deposition of ZnO tetrapod nanostructures

Large‐yield zinc oxide (ZnO) nanosized tetrapods have been obtained by a standard vapour‐phase growth technique to which a few modifications have been added, such as the separation of the Zn source evaporation region from the Zn oxidation region inside the reactor setup. This modification allows to keep the growth conditions constant and continuous for a long time, thus favouring the obtainment of large amounts of ZnO tetrapod nanostructures. As some contaminations usually occur due to metallic Zn particles and/or different ZnO nanostructures, including not completely reacted ZnO_1‐x solid phases, they can be removed by a three‐step “purification” procedure as described in the article. Further to that, a deposition method from suitable liquid suspensions is also reported, which allows to produce homogeneous distributions of ZnO tetrapods on large substrate areas. The proposed procedures are expected to be particularly appropriate for a large production of samples for device use. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

PbS microcrystals with a magic‐square‐like structure prepared by a simple hydrothermal method

PbS microcrystals with a magic‐square‐shaped structure were successfully fabricated via a simple hydrothermal route, employing (CH₃COO)₂Pb and Na₂S₂O₃ as the lead and sulfur source without the assistance of any surfactant or template. S₂O₃^2‐ ions acted not only a supplier of S^2‐ ions but also a coordinating reagent. The formation of the above morphology was the direct result of the coordination between thiosulfate ions and lead ions. Researches indicated that the different synthetic approach could influence the morphology of the final product. A possible formation mechanism was suggested. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of dendritic‐like CdS by hydrothermal method and its photocatalytic performance

In this article, dendritic‐like CdS has been prepared by a hydrothermal method using thiourea as the sulfur source, and the effects of experimental conditions on the morphologies of CdS have been investigated. The performances of CdS have been analyzed by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and the fluorescence and photodegradation properties of CdS have also been investigated. The XRD result indicates that the dendritic‐like CdS are of hexagonal phase and they are highly crystallized. Also, the FESEM results show that the ratio of raw material affects the yield of CdS, the reaction time affects the morphology of CdS. The best morphology of CdS is dendritic structures and the length is about 6 μm. The fluorescence spectrum shows three peaks at 470 nm, 513 nm and 547 nm, which indicates that the dendritic‐like CdS mainly emits green and blue fluorescence. Moreover, the dendritic‐like CdS exhibits good photocatalytic activity and its photodegradation rate to methylene blue can reach 92%. The growth mechanism for the formation of CdS with dendritic structure is also described.     

Structure and optical properties of Mg‐doped ZnO nanoparticles by polyacrylamide method

Mg‐doped ZnO (Mg_xZn_1‐xO) nanoparticles with precise stoichiometry are synthesized through polyacrylamide polymer method. Calcination of the polymer precursor at 650 °C gives particles of the homogeneous solid solution of the (Mg_xZn_1‐xO) system in the composition range (x < 0.15). ZnO doping with Mg causes shrinkage of lattice parameter c. The synthesized Mg_xZn_1‐xO nanoparticles are typically with the diameter of 70–85 nm. Blue shift of band gap with the Mg‐content is demonstrated, and photoluminescence (PL) from ZnO has been found to be tunable in a wide range from green to blue through Mg doping. The blue‐related PL therefore appeared to be caused by energetic shifts of the valence band and/or the conduction band of ZnO. Mg_xZn_1‐xO nanoparticles synthesized by polyacrylamide‐gel method after modified by polyethylene glycol surfactant have a remarkable improvement of stability in the ethanol solvent, indicating that these MZO nanoparticles could be considered as the candidate for the application of solution–processed technologies for optoelectronics at ambient temperature conditions.     

Growth characteristics of ultra long double-ended acicular ZnO synthesized by a hydrothermal process

Double-ended acicular ZnO structure can be synthesized via a hydrothermal process with tetramethylammonium hydroxide and zinc acetate as precursors and polyvinyl alcohol (PVA) as a structure-directing agent. The as-prepared ZnO products show the well crystalline wurtzite structure with growth direction along [0 0 0 1]. For the first time, PVA is found to be employed as a reservoir of Zn²⁺ ions in the present study, and can control the concentration of Zn²⁺ in reaction solution, and the acicular morphology can be formed at the two ends of the 1-D ZnO structure, due to the effect of secondary growth that occurs as the sufficient concentration of Zn²⁺ ions chelated by PVA releasing to the reaction solution. Furthermore, the size of the 1-D ZnO structure can be tuned by different amounts of PVA addition.