Pigment identification and decoration analysis of a 5th century Chinese lacquer painting screen: a micro‐Raman and FTIR study

To investigate the pigments and decoration applied to a wood‐based lacquer painting screen from the tomb of Si‐ma Jin‐long, Shanxi Province, central China, made by Chinese craftsmen in the 5th century, a combination of micro‐Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), wavelength dispersive X‐ray fluorescence (WDXRF), and microscopic examination was used. The obtained results are as follows: (1) the black, yellow, and red colors are identified as carbon black, orpiment and realgar, and cinnabar, respectively, by using micro‐Raman spectroscopy. The FTIR result shows that the white pigment filled in the leaves is not lead white, as assumed in the literature, but gypsum. Whether lead white was used at other locations remains unanswered and requires more samples for further work; (2) the thickness of each discernable pigment layer, as observed under the microscope, is approximately equal and the differences among them are small, suggesting a superfine painting skill; besides, a noticeable smooth interface between wood and the red grounding substance indicates that a polishing process might have been applied before the painting; (3) the red background was proved to contain cinnabar, but further FTIR analyses found no evidence for the presence of Chinese wood oil; and (4) the most interesting finding, rarely reported before, is that white grains of different sizes are found in both pigment layers and the grounding substance, which are perhaps an intentional addition. Further, in situ XRF and Raman analyses indicate that they are sourced from hydroxyapatite, coming probably from the intentional addition of animal bone ash to the lacquer. But how such a process could be finished and what purpose it served have not yet been answered. Copyright © 2009 John Wiley & Sons, Ltd.     

Non‐invasive approach in the study of polychrome terracotta sculptures: employment of the portable XRF to investigate complex stratigraphy

In the field of conservation science, in situ non‐invasive analytical techniques are widely used to investigate polychrome surfaces as frescoes, mural or easel paintings. Indeed, these techniques allow achieving information on materials composition and they often reduce the micro‐sampling. In this work, in situ non‐invasive techniques have been used to study a complex system, terracotta polychrome sculptures. The presence of the priming, the numerous painted layers and the ground layer spread on a porous material substrate are the main features of these sculptures; therefore, their study requires a scientific approach based on results obtained by different analytical techniques. In order to evaluate potentialities and limitations of the non‐invasive approach to this complex case, the results of energy‐dispersive X‐ray fluorescence (EDXRF), spectrophotometry and optical microscopy have been compared with the data achieved by laboratory analytical investigation as optical and scanning electron microscopy, energy‐dispersive X‐ray microanalysis and Raman spectroscopy. In particular, XRF data collected on several polychrome terracotta are here re‐examined on the basis of the results obtained by laboratory techniques. Even if, in some cases, portable XRF may induce to a wrong interpretation of the stratigraphy, it can be considered a suitable instrument for a preliminary diagnostic campaign of terracotta polychrome sculptures. Copyright © 2011 John Wiley & Sons, Ltd.     

A novel combinative Raman and SEM mapping method for the detection of exfoliation of graphite in electrodes at very positive potentials

The random exfoliation at very positive potentials (>5 V vs Li/Li⁺) of graphite (used as a conductive component in positive electrodes of lithium‐ion batteries) was investigated with in situ Raman microscopy and post mortem scanning electron microscopy (SEM). A novel semiautomated computational method for the data analysis of both characterization methods was developed to correlate Raman and SEM information with good lateral resolution, in order to locate exfoliated graphite particles. Proof is given that the exfoliating particles detected via the semiautomatic in situ Raman microscopy mappings correctly describes exfoliated areas, as confirmed via post mortem SEM pictures. Copyright © 2011 John Wiley & Sons, Ltd.     

Leucine pools in Escherichia coli biofilm discovered by Raman imaging

In structured communities of bacteria known as biofilms, a variety of biomolecules have been shown to play a unique role as signals and/or regulators in biofilm formation. Here, we report that high levels of the amino acid leucine (leucine pool) were detected, for the first time, within microcolonies in a 30‐h‐old Escherichia coli biofilm by Raman imaging. Localization of leucine revealed by multifrequency Raman images indicates leucine accumulation during the early stage of the E. coli biofilm formation, which may have resulted from physiological environment‐specific metabolic adaptation. We demonstrate that our label‐free Raman imaging method provides a useful platform for directly identifying still unknown natural products produced in biofilms as well as for visualizing heterogeneous distributions of biofilm constituents in situ. Copyright © 2011 John Wiley & Sons, Ltd.     

Information‐theoretic chemometric analyses of Raman data for chemical reaction studies

A methodology of multivariate chemometric techniques based on the information‐theoretic approach was applied for elucidating chemical reaction information from a Raman data array R _m×ν that arises from in situ reaction monitoring. This reaction‐induced dynamic dataset R _m×ν can be contaminated by random cosmic ray spikes found in the midst of characteristic spectral variations associated with the disappearance or emergence of Raman active reactants, intermediates and products. Such spurious cosmic spikes were identified and removed using a novel and fast numerical approach based on maximum and minimum spectral entropy principles while preserving the genuine reaction‐induced spectral variations. Subsequently, the band‐target entropy minimization (BTEM) algorithm, a minimum spectral entropy based self‐modeling curve resolution technique, was applied to recover the pure component spectra of Raman active chemical species. Information gain through the chemometric analyses was calculated using information entropies with base 2 logarithm. This sequence of information‐theoretic chemometric analyses (or transinformations) was successfully tested on the reaction spectral data obtained from alcoholysis of acetic anhydride, which contains four Raman active chemical species. It is envisioned that this series of multivariate statistical analyses will be useful in chemical reaction studies and process analytical technology (PAT) applications that utilize in situ Raman spectroscopy to monitor transient dynamic changes in chemical concentrations, and also in Raman microscopy/imaging data containing spatial variations. Copyright © 2010 John Wiley & Sons, Ltd.     

A large‐solid‐angle X‐ray Raman scattering spectrometer at ID20 of the European Synchrotron Radiation Facility

An end‐station for X‐ray Raman scattering spectroscopy at beamline ID20 of the European Synchrotron Radiation Facility is described. This end‐station is dedicated to the study of shallow core electronic excitations using non‐resonant inelastic X‐ray scattering. The spectrometer has 72 spherically bent analyzer crystals arranged in six modular groups of 12 analyzer crystals each for a combined maximum flexibility and large solid angle of detection. Each of the six analyzer modules houses one pixelated area detector allowing for X‐ray Raman scattering based imaging and efficient separation of the desired signal from the sample and spurious scattering from the often used complicated sample environments. This new end‐station provides an unprecedented instrument for X‐ray Raman scattering, which is a spectroscopic tool of great interest for the study of low‐energy X‐ray absorption spectra in materials under in situ conditions, such as in operando batteries and fuel cells, in situ catalytic reactions, and extreme pressure and temperature conditions.     

Discrimination of carotenoid and flavonoid content in petals of pansy cultivars (Viola x wittrockiana) by FT‐Raman spectroscopy

Fourier Transform Raman spectroscopy (FT‐Raman) has been applied for the non‐destructive in‐situ analysis of pigments on differently colored flower petals of pansy cultivars (Viola x wittrockiana). The main target of the present study was to investigate how far the Raman mapping technique through FT‐Raman spectroscopy and cluster analysis of the Raman spectra is a potential method for the direct, in‐situ discrimination of flavonoids (flavonols against anthocyanins) and of carotenoids occurring in flowers, using intact and differently colored flower petal of Viola x wittrockiana for this case study. In order to get more information about the reliability of the direct in‐situ flavonoid detection by the Raman method, pigments extracts of the petals were separated by thin‐layer chromatography (TLC) and investigated by Raman spectroscopy. Hierarchical cluster analysis (HCA) of the Raman spectra from reference pigments (carotenoids, anthocyanins and flavonols), from areas of the flower petals, and from the TLC extracts allowed discriminating the various pigments, in particular flavonoids (flavonols against anthocyanins) and carotenoids. With a two‐dimensional Raman mapping technique, which provides a chemical image of the sample under investigation, we determined by cluster analysis the distribution of carotenoids, anthocyanins and flavonols from the outer layer of the petals, and by integrating through suitable spectral regions selected as characteristic markers for particular pigments their relative concentration could approximately be determined. We found a satisfactory correlation between the patterns seen on the visible images and the patterns on the chemical images obtained by Raman mapping. Copyright © 2011 John Wiley & Sons, Ltd.     

Phase-contrast X-ray imaging of the gas diffusion layer of fuel cells

The understanding of and in situ observation of the transport and distribution of water in carbon‐paper gas diffusion layers (GDLs) using non‐destructive imaging techniques is critical for achieving high performance in polymer electrolyte fuel cells (PEFCs). To investigate the behavior of water in GDLs of PEFCs, phase‐contrast X‐ray imaging via X‐ray interferometric imaging (XII) and diffraction‐enhanced imaging (DEI) were performed using 35 keV X‐rays. The XII technique is useful for the radiographic imaging of GDLs and in situ observations of water evolution processes in operating PEFCs. DEI provides a way for tomographic imaging of GDLs in PEFCs. Because high‐energy X‐rays are applicable to the imaging of both carbon papers and heavy materials, which make up PEFCs, phase‐contrast X‐ray imaging techniques have proven to be valuable for investigation of GDLs.     

In situ Raman microscopy applied to large Central Asian paintings

Procedures and versatile Raman instruments are described for the non‐destructive in situ analysis of pigments in large paintings. A commercial Raman microscope is mounted on a gantry for scanning paintings with dimensions exceeding 1 m². Design principles and the physical implementation of the set‐up are outlined. Advantages/disadvantages and performance of the gantry‐based instrument are compared with those of a mobile Raman probe, attached to the same Raman microscope. The two set‐ups are applied to Central Asian thangka paintings. The utility of the gantry‐mounted Raman microscope is demonstrated on a 19th century Buddhist painting from Buriatia, South Siberia. Surprisingly, three arsenic‐based pigments, i.e. orpiment, realgar, and pararealgar, are found all in the same painting. Pararealgar is used for painting the numerous yellow areas. Realgar is admixed with red lead for adjusting its orange tint. Finally, orpiment is blended with Prussian blue for producing green. Traditional malachite is used in addition as a non‐adulterated green pigment. The mobile Raman probe was employed for examining a Tibetan painting of the 18th century from Derge monastery in the Kham area of Sichuan. The highly unique painting could be dated well and its origin accurately located. In fact, the painter's workshop, where the thangka has been executed, is shown in great detail on the painting itself. The painter's palette of this thangka matches the canonical set of pigments used in Tibet for more than 10 centuries. Copyright © 2009 John Wiley & Sons, Ltd.     

In situ diagnostics of catalytic materials using tunable confocal Raman spectroscopy

A new Raman spectroscopic setup for in situ characterization of catalytic materials based on a tunable laser system and a confocal Raman microscope is described. The laser excitation wavelength is variable over a broad range from deep ultraviolet (UV) to near‐infrared allowing for targeted use of Raman diagnostics for catalyst characterization. By utilization of resonance effects, the sensitivity of the method can be strongly increased. The potential of the setup is illustrated by new in situ Raman results on dispersed vanadium oxide catalysts obtained at 217.5 and 280 nm UV laser excitation. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of Al content on the structure of Al‐substituted goethite: a micro‐Raman spectroscopic study

The characterization of X‐ray diffraction, X‐ray fluorescence, and field emission scanning electron microscope were used to confirm the successful preparation of Al‐substituted goethite with different Al content. The micro‐Raman spectroscopy was utilized to investigate the effect of Al content on the goethite lattice. The results show that all the feature bands of goethite shifted to high wavenumbers after the occurrence of Al substitution for Fe in the structure of goethite. The shift of wavenumber shows a good linear relationship as a function of increasing Al content especially for the band at 299 cm⁻¹ (R² = 0.9992). The in situ Raman spectroscopy of thermally treated goethite indicated that the Al substitution not only hinders the transformation of goethite, but also retarded the crystallization of thermally formed hematite. All the results indicated that Raman spectrum displayed an excellent performance in characterizing Al‐substituted goethite, which implied the promising application in other substituted metal oxides or hydroxides. Copyright © 2013 John Wiley & Sons, Ltd.     

In situ monitoring of solid‐state transition of p‐aminobenzoic acid polymorphs using Raman spectroscopy

The purpose of this study is to investigate the mechanism of solid‐state polymorphic transition of p‐aminobenzoic acid (PABA) using in situ Raman spectroscopy measurement. The polymorphic transition experiments were conducted on a micro quartz vessel mounted on a microscope, hot and cold stage, under isothermal conditions. The temperature was precisely controlled by a standalone temperature controller equipped with liquid nitrogen cooling system. The Raman spectroscopy probe was positioned on the surface of the solid sample in the micro vessel. The polymorphic transition progression was in situ monitored and recorded by Raman spectroscopy. Based on the polymorphic transition rate resulted from the quantitative analysis of Raman spectra, the mechanism of solid‐state polymorphic transition of PABA was examined by various empirical kinetic models. An Arrhenius analysis was also performed to calculate activation energies from 134.7 kJ mol⁻¹ to 137.7 kJ mol⁻¹ for the transition. The results demonstrated that in situ Raman spectroscopy is a valuable and accurate technique to probe polymorphic transition process. Copyright © 2009 John Wiley & Sons, Ltd.     

Application of Surface‐Enhanced Raman Scattering for ex Situ and in Situ Investigations of Polythiophene Derivatives

Polythiophene derivative films have been synthesized on electrochemically roughened silver, gold, and copper electrodes by anodic oxidation of the corresponding monomers. Surface‐enhanced Raman scattering (SERS) analyses of these coatings led to high‐quality spectra with high signal‐to‐noise ratios. In contrast with platinum, the use of SERS‐active metals allowed the observation of important changes in the positions, widths, and relative intensities of the Raman bands during the polymer doping‐dedoping process. In situ SERS investigations revealed that the modifications in the spectral features, when the polymer oxidation degree is progressively increased, are due to a transition from the aromatic to the quinoid structure and to an increase of structural defects along the polymer chains. Moreover, in the case of soluble polyalkylthiophene films, SERS analyses were also carried out using colloidal silver solutions. Despite the very low polymer concentration and the mild experimental conditions used in these experiments, a large amplification of the Raman signal took place. Two other methods for obtaining polybithiophene–silver composite films are reported. In these cases, thanks to the silver particles, the polymer displays a SERS effect, which greatly improves the signal‐to‐noise ratio of the Raman spectra, thus allowing a much better vibrational analysis of both doped and undoped states.     

The first in situ Raman spectroscopic study of San rock art in South Africa: procedures and preliminary results

Southern Africa has a rich heritage of hunter‐gatherer, herder and farmer rock art traditions made by using both painted and engraved techniques. Until now, there have been only a handful of studies on the chemical analysis of the paint, as all previous types of analysis required the removal of pigment samples from the sites a practice which has been avoided. Raman spectroscopy is an ideal techniques to analyse the paint non‐destructively and also offers the possibility of in situ work with portable instruments. This article describes the procedures and reports the preliminary results of the first in situ Raman spectroscopic study of rock art in South Africa (also a first worldwide), where we, first, evaluate the capability of a Raman portable instrument in very difficult conditions, second, analyse the paints in order to contribute to a better knowledge of the technology used and, third, evaluate the possible contribution of in situ analyses in conservation studies. The paintings from two different rock art sites were studied. The instrument proved to be highly suitable for in situ analyses in physically very challenging conditions. Most of the pigments and alteration products previously detected under laboratory conditions were identified, thereby giving information on both the pigments and conservation state of the paintings. A layered structure of alteration products and pigment was identified in situ for the first time by controlling the laser power, thereby obtaining the same results as in mapping experiments of cross sections of paint. Copyright © 2010 John Wiley & Sons, Ltd.     

In‐situ spectroscopic assessment of the conservation state of building materials from a Palace house affected by infiltration water

The built Heritage constantly suffers different deterioration processes caused by the action of external agents, being one of the main consequences of the formation of soluble salts. These salts appear as efflorescences or subefflorescences that by hydration and dehydration cycles and/or dissolution processes producing crystallization of salts within the pores may promote internal fractures and material loss. The assessment of building material conservation on a 15^th century Palace house, located close to the Urola river (Azpeitia, Basque Country, North of Spain), has been performed by in‐situ characterization of pathologies on sandstone, mortar and limestone affected by infiltration waters. Portable Raman and X‐ray fluorescence spectrometers have been used to characterize the bulk materials as well as the salts present along the different walls of the Palace. The in‐situ analysis by those portable equipments has been complemented with laboratory measurements on selected samples, taken close to the spots analysed by the portable instruments. Different carbonates (natrite, termonatrite, natron, calcite and gaylussite), oxides (hematite, limonite and rutile), feldspar (orthoclase) and silicates (quartz) have been identified as original compounds. Furthermore, nitrates (niter, nitrocalcite and nitratine) and sulphates (gypsum and thenardite) have been found as decaying compounds permitting to establish the degradation processes of the attack produced by the infiltration waters on the different building materials. Moreover, the study revealed that certain materials used in a previous restoration produced new degradation processes, evidencing the importance of a proper selection of the materials to be used in the interventions. Copyright © 2013 John Wiley & Sons, Ltd.     

Pigment analysis of Portuguese portrait miniatures of 17th and 18th centuries by Raman Microscopy and SEM‐EDS

Seventeen Portuguese miniature portraits on copper support from the Évora Museum collection (Portugal) were analyzed in situ and nondestructively by Raman microscopy (RM), SEM‐EDS, and stereomicroscopy. This work constitutes a great breakthrough in the study of miniature paintings from the 17^th and 18^th centuries, since the chemical information known about this unique kind of paintings are still scarce, and in particular, this exclusive collection was never been subjected to any physicochemical study. In this work, each portrait was examined in detail in order to characterize the pigments palette used by the miniaturists. The μ‐Raman analysis, in particular, guaranteed an exceptional visualization and good individual identification of small grains of pigments and other constituents of the pictorial layer. Using this technique, 19 compounds were identified, including bluish black covellite, a pigment rarely found in oil paintings. SEM‐EDS was used as an important complementary technique to confirm the chemical nature of some pigments and to identify shell gold (gold dust) in some portraits. Overall, the pigments identified in this large set of old paintings are broadly consistent with those mentioned in the painting treatises of that time or reported in other more modern bibliographic sources. Copyright © 2014 John Wiley & Sons, Ltd.     

In vivo study on the protection of indole‐3‐carbinol (I3C) against the mouse acute alcoholic liver injury by micro‐Raman spectroscopy

Micro‐Raman spectroscopy (MRS) was utilized for the first time to evaluate the effect of indole‐3‐carbinol (I3C) on acute alcoholic liver injury in vivo. In situ Raman analysis of tissue sections provided distinct spectra that can be used to distinguish alcoholic liver injury as well as ethanol‐induced liver fibrosis from the normal state. Sixteen mice with liver diseases including acute liver injury and chronic liver fibrosis, and eight mice with normal liver tissues, and eight remedial mice were studied employing the Raman spectroscopic technique in conjunction with biomedical assays. The biochemical changes in mouse liver tissue when liver injury/fibrosis occurs such as the loss of reduced glutathione (GSH), and the increase of collagen (α‐helix protein) were observed by MRS. The intensity ratio of two Raman peaks (I₁₄₅₀/I₆₆₆) and in combination with statistical analysis of the entire Raman spectrum was found capable of classifying liver tissues with different pathological features. Raman spectroscopy therefore is an important candidate for a nondestructive in vivo screening of the effect of drug treatment on liver disease, which potentially decreases the time‐consuming clinical trials. Copyright © 2008 John Wiley & Sons, Ltd.     

Correction for the effect of soil moisture on in situ XRF analysis using low‐energy background

X‐ray fluorescence (XRF) analyses are affected by many matrix and geometrical factors that, generally, are possible to handle in laboratory conditions. However, when in situ analyses are considered, constraints in the measurement conditions make more difficult to handle some factors, such as moisture, affecting the measurement accuracy. Efforts have been made to correct some of the effects by inserting some steps in the sample preparation process. The problem is that each step added in this process, aiming a better precision and accuracy, makes the in situ measurement harder and longer to accomplish, influencing negatively the intrinsic advantages of the in situ measurement. In this work, we propose a method to correct the effect of soil moisture on in situ XRF analysis using low‐energy background. The method demands a simple calibration, after which a long drying procedure is not necessary before measuring the samples. Copyright © 2012 John Wiley & Sons, Ltd.