Contribution to the tin‐rich region of the Sn‐Zn‐Ti system

The tin‐rich region of the system Sn‐Zn‐Ti system has been studied by diffusion couples, differential scanning calorimetry and electron microprobe analyses. Ternary eutectic reaction occurs at 193.7°C near to the binary tin‐zinc eutectic point and titanium content less than 0.9 at.% Ti. Three ternary compounds with approximate formulae: Ti₈Sn₅Zn₂ to Ti₅Sn₃Zn, TiSn₄Zn₅ and Ti₂Sn₄Zn₃ have been observed. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Glass formation of Ti–Ni–Sn ternary alloys correlated with TiNi–Ti3Sn pseudo binary eutectics

Glass-forming ability (GFA) of Ti–Ni–Sn ternary alloys was investigated. Applying recent models based on atomic size ratio and efficient packing, the composition favoring the glass formation is predicted. Our experiments indicate that the optimized glass-forming composition is located at Ti₅₆Ni₃₈Sn₆, with the critical thickness of complete glass formation approaching 100 μm for the melt-spun ribbons. The Ti₅₆Ni₃₈Sn₆ metallic glass exhibits a sizable supercooled liquid region (ΔT_x) of about 35 K and a reduced glass transition temperature (T_rg) of 0.52. We demonstrate that the glass formation of the Ti₅₆Ni₃₈Sn₆ alloy correlates with the (L → TiNi + Ti₃Sn) pseudo binary eutectic reaction in Ti–Ni–Sn ternary system, which has an invariant temperature and composition at ～1370 K and ～Ti₅₈Ni₃₄Sn₈, respectively. With respect to Sn-free Ti–Ni binary alloys, the GFA is enhanced for the Ti–Ni–Sn ternary alloys, but the improvement is limited possibly due to changes in the crystalline phases competing with glass formation.     

Effects of Sn addition on the glass forming ability and crystallization behavior in Ni-Zr-Ti-Si alloys

The effect of Sn substitution for Si on the glass forming ability (GFA) and crystallization behavior has been studied in Ni₅₉Zr₂₀Ti₁₆Si_5 − xSn_x (x=0, 3, 5) alloys. A bulk amorphous Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ alloy with diameter up to 3 mm can be fabricated by injection casting. Partial substitution of Si by Sn in Ni₅₉Zr₂₀Ti₆Si_5 − xSn_x alloys improves the glass forming ability. The improved GFA of the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ alloy is can be explained based on the lowering of liquidus temperature. The crystallization sequence becomes completely different with addition of Sn. The amorphous Ni₅₉Zr₂₀Ti₁₆Si₅ alloy crystallizes via precipitation of only a cubic NiTi phase in the first crystallization step, whereas the amorphous Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ alloy crystallizes via simultaneous precipitation of orthorhombic Ni₁₀(Zr,Ti)₇ and cubic NiTi phases. Addition of Sn in the Ni₅₉Zr₂₀Ti₁₆Si₅ alloy suppresses the formation of the primary cubic NiTi phase. The bulk amorphous Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ alloy exhibits high compressive fracture strength of about 2.7 GPa with a plastic strain of about 2%.     

One‐step fabrication of SnxTi1‐xO2 rutile‐type core‐shell microspheres and their electrochemical properties

Sn_xTi_1‐xO₂ core‐shell microspheres were synthesized through a simple one‐step hydrothermal method. The structural and morphologic properties were unambiguously characterized, and the electrochemical performance of the Sn_xTi_1‐xO₂ microspheres was determined by cyclic voltammetry. The possible formation mechanism of Sn_xTi_1‐xO₂ microspheres was also proposed.     

Application of diffusion couple technique for the determination of the Ti‐Bi‐Sn phase diagram

The system Ti‐Bi‐Sn has been investigated by solid/liquid diffusion couples at 500, 600, 700 and 800°C. A non‐negligible solubility of Sn into solid Bi is found. Diffusion layers of the recently revealed ternary compound Ti₃BiSn have been observed, thus its existence has been confirmed. Data about the homogeneity ranges of the binary end‐system compounds have been obtained. The assessed growth constants of the diffusion layers are comprised in the interval 10^‐12 –10^‐14 m².s^‐1. The phases participating in the hypothetical ternary eutectic reaction, probably are: (Bi), (Sn), Liquid and Ti₂Sn₃. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The effect of Sn addition on the glass-forming ability of Cu-Ti-Zr-Ni-Si metallic glass alloys

The effect of Sn substitution for Ni on the glass-forming ability was studied in Cu₄₇Ti₃₃Zr₁₁Ni_8−xSn_xSi₁ (x=0,2,4,6,8) alloys by using thermal analysis and X-ray diffractometry. With increasing x from 0 to 8, the glass transition temperature, T_g, of melt-spun Cu₄₇Ti₃₃Zr₁₁Ni_8−xSn_xSi₁ alloys increased gradually from 720 to 737 K. On the other hand, the crystallization temperature, T_x, increased from 757 K at x=0 to 765 K at x=2, being nearly same with further increase of x. Partial substitution of Ni by Sn in Cu₄₇Ti₃₃Zr₁₁Ni₈Si₁ promotes the glass formation. Both amorphous Cu₄₇Ti₃₃Zr₁₁Ni_8−xSn_xSi₁ alloys prepared by melt spinning and injection casting showed similar crystallization process during continuous heating in DSC. Temperature range of undercooled liquid region exhibits good correlation with the critical diameter for the formation of an amorphous phase in injection casting.     

Synthesis and improved electrochemical performance of LiCo1‐xSnxO2 (x= 0 to 0.1) powders

Layered intercalation compounds LiCo_1‐xSn_xO₂ (x= 0 to 0.1) have been prepared using a simple combustion route method. X‐ray diffraction patterns and Laser Raman spectrum suggest that the synthesized materials had the R‐3m structure. Scanning electron images show that particles are well‐crystallized with a size distribution in the range of 50‐100 nm. The room temperature electrical conductivity of the sample increased with Sn content. For LiCo_1‐xSn_xO₂(x = 0, 0.01, 0.03, 0.05 and 0.1), the first discharge capacity increased with increase in Sn content. Among these samples, LiCo_0.95Sn_0.05O₂had produced the best performance of all others with a stable reversible capacity of 186 mAhg^‐1 after 30 cycles. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of hexagonal ferrites BaFe12‐2xZnxTixO19 (0 ≤ x ≤ 2) by thermal decomposition of freeze‐dried precursors

Substituted barium hexaferrites, BaFe_12‐2xZn_xTi_xO₁₉ (0 ≤ x ≤ 2), have been synthesized by thermal decomposition of freeze‐dried acetate precursors. Decomposition and phase formation were investigated by means of thermal analysis, XRD and IR spectroscopy. The initially amorphous decomposed precursor reacts to the substituted hexaferrite via a spinel‐like maghemite (γ‐Fe₂O₃) and Zn/Ti containing spinel ferrites. The synthesis method allows a decrease of the reaction temperature and time, necessary for producing a single phase hexaferrite. At relative low reaction temperatures, the substitution rate x shows remarkable differences at different iron sublattices. For x ≤ 0,8 this selective substitution results in an increase of magnetization as x grows. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis,physical properties,and atomic structure of niobium-doped RbTiOPO<Subscript>4</Subscript> crystals

Single crystals of solid solutions Rb_1?xTi_1?xNb_xOPO₄(RTP: Nb) were grown and the temperature dependences of their dielectric and nonlinear optical properties and electric conductivity were studied. The maximum possible niobium content in these crystals is close to x = 0.1. The niobium impurities decelerate growth of {100} faces, and crystals take a plate-like habit. With increasing doping level, ferroelectric phase transitions diffuse and their temperature decreases. A specific feature of the dielectric properties of RTP: Nb crystals is the appearance of a broad relaxation maximum ε₃₃ in the temperature range 200–600°C caused by the formation of vacancies in the rubidium cation sublattice. The intensity of second-harmonic generation under laser irradiation decreases with increasing niobium content. The atomic structure of a crystal with x = 0.01 is studied and it is established that niobium substitutes for titanium only in Ti(1) positions.     

Effects of Nb on the formation of icosahedral quasicrystalline phase in Ti-rich Ti-Zr-Ni-Cu-Be glassy forming alloys

As-cast (Ti₄₀Zr₂₅Ni₈Cu₉Be₁₈)_100−xNb_x (0 ? x ? 5) (Ф3) glassy forming alloys were investigated in order to clarify the role of Nb on the formation of icosahedral quasicrystalline phase (I-phase) in Ti-rich Ti-Zr-Ni-Cu-Be glassy system. It is found that an I-phase is formed in Ti-Zr-Ni-Cu-Be glassy alloy by addition of Nb element; however, the nucleation rate of I-phase increases, whereas the grain growth rate decreases with increasing Nb content. Moreover, with increasing Nb content, the thermal stability against crystallization increases, while the temperature range of stability of the I-phase decreases.     

Role of oxygen vacancies in the coloration of 0.65Pb(Mg1/3Nb2/3)O3‐0.35PbTiO3 single crystals

The coloration and oxygen vacancies in 0.65Pb(Mg_1/3Nb_2/3)O₃‐0.35PbTiO₃ (PMN‐PT(65/35)) (starting composition) single crystals grown by a so‐called modified Bridgman technique were investigated in this paper. Light yellow and dark brown colored crystals were generally observed for the typical as‐grown PMN‐PT(65/35) single crystals. X‐ray diffraction results demonstrated that they were both of pure perovskite structure, but good electric properties were only obtained for the light yellow crystal. X‐ray photoelectron spectroscopy (XPS) was used to investigate the electronic structure of its components. The O 1s photoelectron spectra of the dark brown colored crystals located at the higher binding energy side, which meant the existence of the more oxygen vacancies. It accordingly led to the formation of the low valence cations associated with the coloration of the crystals, which is also testified by the obtained X‐ray photoelectron spectra of Ti and Nb. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Soft‐Mode Spectroscopy in Fe:KTa1‐xNbxO3 Crystals

Fe‐doped potassium tantalite niobate, Fe:KTa_1‐xNb_xO₃ (Fe:KTN), crystallizes with x = 0.48 and a perovskite‐type structure in tetragonal system with point group 4mm, conforming space group P4mm. The paraelectric‐ferroelectric structural transition of the Fe:KTN is studied by Raman scattering investigations. A condensed soft lattice vibrational mode at the phase transition has been analyzed. It originates from the symmetric O2/O3‐Nb/Ta‐O3/O2 in‐plane bending of the Nb/TaO₆ group. The soft optical phonon mode concerns the extraordinary transverse optical phonons propagating along the [110] direction. The Raman spectra measured reflect the crystal disorder. Curie temperature measured by two methods is within 353 and 356.5 K.     

Diffusion couple studies of the Ti‐Bi‐Zn system

The system Ti‐Bi‐Zn has been investigated using diffusion couples consisting of solid Ti and liquid (Bi+Zn) phase. The diffusion paths at 400, 500, 700 and 800 °C have been traced by means of electron microprobe analyses. The growth constants of the diffusion layers are roughly assessed. The phase diagram data obtained in this investigation are compared with previous studies of equilibrated alloys. The existence of the ternary compound TiBiZn has been confirmed. The formation of another phase with approximate formulae Ti₄Bi₃Zn to Ti₉Bi₇Zn₄ has been observed at high temperatures. The latter compound as well as the ternary extension of the Ti_XBi_Y (X ≈ 5, Y ≈ 6) phase react easily with air. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structure and properties of Ni60(Nb100−xTax)34Sn6 bulk metallic glass alloys

Refractory bulk metallic glasses and bulk metallic glass composites are formed in quaternary Ni-Nb-Ta-Sn alloy system. Alloys of composition Ni₆₀(Nb_100−xTa_x)₃₄Sn₆ (x = 20, 40, 60, 80) alloys were prepared by injection-casting the molten alloys into copper molds. Glassy alloys are formed in the thickness of half mm strips. With thicker strips (e.g., 1 mm), Nb₂O₅ and Ni₃Sn phases and the amorphous phase form an in situ composite. Glass transition temperatures, crystallization temperatures, and ΔT_x, defined as T_x1 − T_g (T_x1: first crystallization temperature, T_g: glass transition temperature) of the alloys increase dramatically with increasing Ta contents. These refractory bulk amorphous alloys exhibit high Young’s modulus (155-170 GPa), shear modulus (56-63 GPa), and estimated yield strength (3-3.6 GPa).     

Amorphous Ni59Nb40Pt(1−x)Yx (Y = Sn,Ru; x = 0%, 0.4%) modified carbon paste electrodes and their role in the electrochemical methanol deprotonation and CO oxidation process

This work presents the electrochemical response to methanol deprotonation and CO oxidation in acid media (HClO₄) of different compositional amorphous alloys obtained by ball milling technique. These powders with compositions Ni₅₉Nb₄₀Pt_(1−x)Y_x (x = 0%, 0.4% atm, Y = Sn, Ru ) are used as modified carbon paste electrodes (MCPEs), and mainly as anodes. Concerning the reactivity towards methanol electro-oxidation, the current density is drastically decreased with the presence of tin, susceptible to the potential range, followed by the Ni₅₉Nb₄₀Pt₁ and Ni₅₉Nb₄₀Pt_0.6Ru_0.4 alloys, however DEMS studies demonstrates that the electrodes of compositions Ni₅₉Nb₄₀Pt _0.6Ru_0.4 and Ni₅₉Nb₄₀Pt_0.6Ru_0.2Sn_0.2 show the best tolerance to CO produced by methanol deprotonation, giving rise to more negative onset potential values for the CO₂ production, although the voltammograms for the stripping of a CO monolayer clearly show that, the electrode that possesses a better tolerance to CO adsorbed on the surface of the electrode is Ni₅₉Nb₄₀Pt_0.6Sn_0.4, decreasing the onset potential values 281 mV and 158 mV with respect to the Ni₅₉Nb₄₀Pt₁ and Ni₅₉Nb₄₀Pt_0.6Ru_0.4, respectively. The catalytic activity of the former electrode might be attributed to an adsorbed state of CO unique in this alloy.     

Precipitation of intermetallic phase in Zn‐Ti alloy single crystals

Pure and 0.14 at.%Ti alloyed Zn single crystals have been grown by the Bridgman technique. The alloyed crystal exhibits a sheet‐like precipitation structure parallel to the basal plane of the hexagonal solid solution Zn‐Ti matrix. The tetragonal precipitates are intermetallic compounds of Zn₁₆Ti composition. They are needle‐shaped with the needle axis peferentially aligned along the <a> axis. The approximate orientation relationship between precipitate and matrix is (0001)<11$\bar 2$ 0>_Matrix||(010)[001]_Zn16Ti. To study the influence of alloying on the mechanical properties, the critical resolved shear stress for basal slip has been measured in compression at different temperatures and strain rates. It is shown that the critical resolved shear stress can be very well explained by theories of solid solution and precipitation hardening. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and crystal growth of sillenite phases in the Bi2O3 ‐ TiO2 ‐ Nb2O5 system

The synthesis of Bi₂O₃‐Nb₂O₅ sillenite phase (BNbO) and the solubility of this phase with Bi₁₂TiO₂₀ was investigated by solid‐state reaction synthesis and niobium doped Bi₁₂TiO₂₀ (BTO:Nb) crystals were grown by the Top Seeded Solution Growth (TSSG) technique. The structures of polycrystalline compounds were checked by X‐ray powder diffraction method at room temperature. The correct composition of the sillenite phase stabilized with niobium was determined as Bi₁₂[Nb_0.17Bi_0.83]O_19.7 (BNbO) with unit cell parameter a = 10.261(2) Å. The system BTO‐BNbO is poorly soluble, but niobium doped BTO crystals were grown from the liquid composition 10Bi₂O₃ : xTiO₂ : (1‐x)/2 Nb₂O₅, with x = 0.95 and 0.90. A niobium concentration limit in the liquid phase is established in order to grow BTO:Nb with good crystalline quality. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of indium content and rapid solidification on microhardness and micro‐creep of Sn‐Zn eutectic lead free solder alloy

The Sn‐Zn alloys have been considered as lead‐free solders. In this paper, the effect of 0.0, 0.5, 1.0, 1.5 and 2.0 wt.% Indium as ternary additions on melting temperature, structure, microhardness and micro‐creep of the Sn‐9Zn lead‐free solders were investigated. It is shown that the alloying additions of Indium to the Sn‐Zn binary system result in a suppression of the melting point to 187.9 °C. From x‐ray diffraction analysis, a new intermetallic compound phase, designated β‐In₃Sn is detected. The formation of an intermetallic compound phase causes a pronounced increase in the electrical resistivity and mechanical strength. Also, an interesting connection between dynamic Young's modulus and the axial ratio (c/a) of the unit cell of the β‐Sn was found in which Young's modulus increases with increasing the axial ratio (c/a). The ternary Sn‐9Zn‐xIn exhibits creep resistance superior to Sn‐9Zn binary alloy. The better creep resistance of the ternary alloy is attributed to solid solution effect and precipitation of In₃Sn in the Sn matrix. The addition of small amounts of In is found to refine the effective grain size and consequently, improves hardness. The 89%Sn‐9%Zn‐2%In alloy is a lead‐free solder designed for possible drop‐in replacement of Pb‐Sn solders. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

On Magnetic Properties and Thermal Stability of Fe(M)‐Si‐B (M = V,Ni, Cu,Nb, Mo,Pd, Ag) Amorphous Alloys

Experimental results are presented regarding the variation of the atomic magnetic moment, the Curie temperature and the crystallization temperature of Fe_78‐cM_cSi₉B₁₃ (M = V, Nb, Mo) and Fe_75‐cM_cSi₉B₁₆ (M = Ni, Cu, Pd, Ag) amorphous alloys. Efforts were made to explain qualitatively the phenomena, based on the behavior of the amorphous alloys when various admixtures substitute Fe atoms.     

Substitution effects on ferroelectric,leakage current and anti‐fatigue characteristic of Bi4‐xSbxTi3O12 thin films

Bi_4‐xSb_xTi₃O₁₂ (BSTO) (x = 0, 0.03, 0.04, 0.05, 0.06 and 0.07) thin films have been fabricated on Pt/Ti/SiO₂/Si substrates by sol‐gel method. The effects of various Sb³⁺ content on microstructure and ferroelectric properties of systems are investigated. XRD show that Bi_4‐xSb_xTi₃O₁₂ (x≠0) thin films prefer (117) orientation. The substitution Sb³⁺ for Bi³⁺ reduces the grain size of the film surface. Compared to the BTO (x = 0) film, Bi_4‐xSb_xTi₃O₁₂ films display exciting electric properties. Especially when x = 0.04, the film Bi_3.96Sb_0.04Ti₃O₁₂ has achieved the max 2Pr value of 87μC/cm². This film also has a better anti‐fatigue characteristic, which can be up to 10¹⁰ switching cycles without fatigue. The leakage current density improved with J = 8×10⁻⁸ A/cm².