Detection of melamine in liquid milk using surface‐enhanced Raman scattering spectroscopy

Melamine, a nitrogen‐rich chemical, has recently caused enormous economic losses to the food industry due to the cases of milk products adulterated by melamine. This has led to an urgent need of rapid and reliable methods for detection of melamine in food. In this study, surface‐enhanced Raman scattering (SERS) spectroscopy was used to detect melamine in liquid milk. The sample preparation with liquid milk is very easy; it has to be only diluted with double‐distilled water followed by centrifugation. By using a silver colloid, at least a 10⁵‐fold enhancement of the Raman signal was achieved for the measurement of melamine. The limit of detection by this method was 0.01 µg ml⁻¹ for melamine standard samples. Based on the intensity of the Raman vibrational bands normalised to that of the band at 928 cm⁻¹ (CH₂), an external standard method was employed for quantitative analysis. The linear regression square (R²) of the curve was 0.9998; the limit of quantitation using this approach was 0.5 µg ml⁻¹ of melamine in liquid milk; the relative standard deviation was ≤10%; and recoveries were from 93 to 109%. The test results for SERS were very precise and as good as those obtained by liquid chromatography/tandem mass spectrometry. The method was simple, fast(only needs about 3 min), cost effective, and sensitive for the detection of melamine in liquid milk samples. Therefore, it is more suitable for the field detection of melamine in liquid milk. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of calixarene to high active surface‐enhanced Raman scattering (SERS) substrates suitable for in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater

The characteristics of the sol–gel matrix embedding Ag nanoparticles functionalized with 25,27‐dimercaptoacetic acid‐26,28‐dihydroxy‐4‐tert‐butylcalix[4]arene (DMCX) suitable for the in situ detection of polycyclic aromatic hydrocarbons (PAHs) in seawater is presented. The DMCX‐functionalized silver nanoparticles were produced by the thermal reduction method in xerogel film. The silver colloid blocks were formed in the sol–gel matrix, with a diameter ranging from 50 to 120 nm. DMCX forming the monolayer on the silver nanoparticle surface contributes to the surface‐enhanced Raman scattering (SERS) activity due to the aggregation of silver nanoparticles and the preconcentration of PAH molecules within the zone of electromagnetic enhancement. When selected, PAH molecules e.g. pyrene and naphthalene were adsorbed onto the SERS substrate; Raman band positions of PAH were slightly shifted. A calibration procedure reveals that this type of SERS substrate has a limit of detection of 3 × 10⁻¹⁰ mol/l for pyrene and 13 × 10⁻⁹ mol/l for naphthalene in artificial seawater. The Raman signal response on a pyrene concentration change in artificial seawater was evaluated using a 671‐nm Raman setup with a flow‐through cell. This type of SERS substrate will be suitable for the in situ trace detection of pollutant chemicals in seawater. Copyright © 2012 John Wiley & Sons, Ltd.     

DFT study and quantitative detection by surface‐enhanced Raman scattering (SERS) of ethyl carbamate

Ethyl carbamate (EC), a potentially toxic compound, is found in alcoholic beverages and fermented foodstuff. A combined experimental and theoretical study of Raman on EC is reported in this work for the first time. The Raman bands observed for EC in solid phase are characteristic for the carbonyl group, C―C, C―H and N―H stretching and deformation vibrations. These spectral features coupled with a pKa study allowed establishing the neutral species of EC present in the aqueous solutions experimentally tested at different concentrations. In addition, by performing a density functional theory study in the gas phase, the calculated geometry, the harmonic vibrational modes, and the Raman scattering activities of EC were found to be in good agreement with our experimental data and helped establish the surface‐enhanced Raman scattering (SERS) behavior and EC adsorption geometry on the silver surfaces. The Raman peak at 1006 cm⁻¹, assigned to the υ_s(CC) + ω(CH) modes, the strongest and best reproducible peak in the SERS spectra, was used for a quantitative evaluation of EC. The limit of detection, which corresponds to a signal‐to‐noise ratio equal to 3, was found to be 2 × 10⁻⁷ M (17.8 µg l⁻¹). SERS spectra obtained by using hydroxylamine hydrochloride‐reduced silver nanoparticles provide a fast and reproducible qualitative and quantitative determination of EC in aqueous solution. Copyright © 2013 John Wiley & Sons, Ltd.     

On‐site detection of phosgene agents by surface‐enhanced Raman spectroscopy coupled with a chemical transformation approach

Phosgene and its analogs are greatly harmful to the public health, environmental safety and homeland security as widely used industrial substances with extremely high toxicity. In order to rapidly evaluate the emergency risk caused by these chemicals, a new highly sensitive method based on surface‐enhanced Raman spectroscopy (SERS) technique for measurement of phosgene agents was developed for the first time. Coupled with a chemical transformation approach, the highly toxic phosgene was conveniently converted to a SERS‐sensitive probe, i.e. iodine (I₂), with low toxicity or non‐toxicity. The characteristic SERS peak in 459 cm⁻¹ was used for quantitation and was presumed as a formation of triiodide anion (I₃⁻), which was induced in an iodide (I⁻)‐aggregation Au NPs system. The total measurement can be completed in ~20 min with the limits of detection of ~60 µg/l (phosgene) and ~30 µg/l (diphosgene), respectively, on a portable Raman spectrometer. This work is the first report of SERS measurement on phosgene and diphosgene in a quantitative level. This method is expected to meet the requirements of on‐site detection of phosgene agents, promote emergency responses and raise more opportunities for the portable SERS applications. Copyright © 2015 John Wiley & Sons, Ltd.     

The utilization of silver salts of aromatic thiols as core materials of SERS‐based molecular sensors

Silver salts of aromatic thiols are one class of organic–inorganic heterostructured materials, showing peculiar photoreaction characteristics. When an argon ion laser is exposed to silver benzenethiolate (AgBT), for instance, its Raman spectrum changes over time, eventually becoming the same as the surface‐enhanced Raman scattering (SERS) spectrum of benzenethiol on a roughened Ag substrate. AgBT and its analogs can thus be used as a core material of molecular sensors operating via SERS; we demonstrate this specifically, by monitoring the SERS peaks of BT, in which biotinylated AgBT selectively recognizes streptavidin molecules down to concentrations of 10⁻¹¹ g ml⁻¹ (i.e. ∼0.2 pM ). Since numerous silver thiolates can be used as the core material, multiple bioassays are readily accomplished using the present methodology. Copyright © 2008 John Wiley & Sons, Ltd.     

Rapid detection of a foreign protein in milk using IMS–SERS

A method for rapid detection of foreign protein contamination in complex food matrices is critically needed. Here we present a novel method that combines immunomagnetic separation (IMS) and surface‐enhanced Raman scattering (SERS) to detect ovalbumin (OVA), an egg white protein, added into whole milk. IMS was used to specifically capture the OVA out of the milk. Then SERS was applied to analyze the IMS eluate using silver dendrites as the substrate. Two SERS sample preparation methods, namely solution based and substrate based, were used to prepare the IMS eluate for SERS analysis. Results show both methods were able to detect 1 µg OVA in 1 ml milk (1 part per million). Based on the results of principal component analysis and partial least‐squares analysis, solution SERS was more capable of quantitative analysis, while substrate SERS was more sensitive for qualitative analysis. The total analytical time for IMS–SERS was less than 20 min, which satisfied the requirement of rapid detection in a milk processing facility. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectra of benzoic acid enhanced by the silver nanoparticles of various sizes

Using sodium borohydride as the reducing agent and polyvinyl pyrrolidone (PVP, MW = 10 000) as the stabilizer, we obtained silver nanoparticles of various diameters (8–78 nm) from silver nitrate aqueous solutions in the concentration range from 0.001 to 0.1 M. The surface‐enhanced Raman scattering (SERS) from benzoic acid's ring‐breathing mode at 1003 cm⁻¹ was detected from its dilute solutions (∼10⁻² M) doped with these silver nanoparticles under 488‐nm laser excitation. The observed size dependences of SERS intensities fit quite well with those calculated by Schatz's theoretical model for spherical silver nanoparticles. The only exception occurred with the smallest particles (8 nm), possibly due to the failure of Maxwell's electromagnetic theory used in this model. Copyright © 2009 John Wiley & Sons, Ltd.     

Self‐assembled silver nanoparticle monolayer on glassy carbon: an approach to SERS substrate

In this paper, the fabrication of an active surface‐enhanced Raman scattering (SERS) substrate by self‐assembled silver nanoparticles on a monolayer of 4‐aminophenyl‐group‐modified glassy carbon (GC) is reported. Silver nanoparticles are attached to the substrate through the electrostatic force between the negatively charged silver nanoparticles and the positively charged 4‐aminophenyl groups on GC. The active SERS substrate has been characterized by means of tapping‐mode atomic force microscopy (AFM), indicating that large quantities of silver nanoparticles are uniformly coated on the substrate. Rhodamine 6G (R6G) and p‐aminothiophenol (p‐ATP) are used as the probe molecules for SERS, resulting in high sensitivity to the SERS response, with the detection limit reaching as low as 10⁻⁹ M . This approach is easily controlled and reproducible, and more importantly, can extend the range of usable substrates to carbon‐based materials for SERS with high sensitivity. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of N‐acetylneuraminic acid on silver nanoparticle surface

N‐Acetylneuraminic acid (sialic acid, Neu5Ac) has recently gained interest as a potential marker for a variety of pathophysiological processes, although no Raman study has been reported for this important biomolecule. In this paper, the vibrational properties of Neu5Ac were studied by means of Raman, surface‐enhanced Raman scattering (SERS), and density functional theory calculations. By adsorption of Neu5Ac on silver nanoparticle surface, strongly enhanced Raman intensities are obtained, allowing easy measurement of small amounts of aqueous Neu5Ac (10 µl of a 10⁻⁷ m solution) utilizing low laser power and short exposure time. The mechanism of adsorption of Neu5Ac on the silver surface is discussed on the basis of the experimental and theoretical results. This study demonstrates that SERS can provide an effective tool for development of a label‐free, rapid, and sensitive optical platform for identification of Neu5Ac. Copyright © 2014 John Wiley & Sons, Ltd.     

Fabrication of periodical Ag–Au compound nanostructure films with controllable Ag nanoparticle aggregate patterns: a study on surface‐enhanced Raman scattering

The Ag–Au compound nanostructure films with controllable patterns of Ag nanoparticle (NP) aggregates were fabricated. A strategy of two‐step synthesis was employed toward the target products. Firstly, the precursor Au NP (17 nm) films were synthesized as templates. Secondly, the Ag NPs (45 nm) were deposited on the precursor films. Three types of Ag NP aggregates were obtained including discrete Ag NPs (discrete type), necklace‐like Ag NP aggregates (necklace type), and huddle‐like Ag NP aggregates (huddle type). The surface‐enhanced Raman scattering (SERS) property was studied on these nanostructures by using the probing molecule of rhodamine 6G under the excitation laser of 514.5 nm. Interestingly, the different types of samples showed different enhancement abilities. A statistical method was employed to assess the enhancement. The relative enhancement factor for each Ag NP was estimated quantitatively under the ratio of 1 : 25 : 18 for the discrete‐type, necklace‐type, and huddle‐type samples at the given concentration of 10⁻⁸ mol/l. This research shows that the enhancement ability of each Ag NP is dependent on the aggregate morphology. Moreover, the different enhancement abilities displayed different limit detection concentrations up to 10⁻⁸, 10⁻¹¹, and 10⁻⁹ mol/l, separately. The understanding of the relationship between the defined nanostructures and the SERS enhancement is very meaningful for the design of new SERS substrates with better performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for quantitative measurement of lactic acid at physiological concentration in human serum

Lactic acid is a simple and effective indicator for estimating physiological function. Rapid and sensitive detection of lactic acid is very useful in clinical diagnosis. However, the concentration of lactic acid in the physiological state is too low to be detected using traditional Raman spectroscopy. We applied silver colloidal nanoparticles‐mediated surface‐enhanced Raman spectroscopy (SERS) for rapid identification and quantification of lactic acid. The standard SERS spectra of lactic acid were defined and the 1395 cm⁻¹ band intensity was used for quantification from 0.3 to 2 mM (R² = 0.99). In clinical blood sample measurement, the ultrafiltration (cutoff value 5 kDa) can efficiently reduce background fluorescence to improve SERS performance. We established identical and optimal procedure by adjusting reaction time and volume ratio of serum and nanoparticles to obtain high SERS reproducibility. Finally, we showed that silver colloidal nanoparticles‐mediated SERS technique was successfully applied to detect lactic acid at physiological concentrations in the blood. Copyright © 2010 John Wiley & Sons, Ltd.     

SERS intensity optimization by controlling the size and shape of faceted gold nanoparticles

In this work, we experimentally investigated the surface‐enhanced Raman spectroscopy (SERS) activity of faceted gold nanoparticles, which have been theoretically predicted to yield giant enhancements. Glycine was used to determine the SERS activity as a function of pH and ionic strength and to estimate the corresponding enhancement factor (EF). By optimizing the synthesis conditions of the flat prismatic nanoparticles, it was possible to control their size and shape. We demonstrate that the maximum SERS intensity increases with the edge length of the triangle, reaching a maximum EF of ∼10¹³ for 1.9 µm triangles (the largest tested). The corresponding glycine detection limit was as low as 10⁻¹² M , close to the single‐molecule threshold. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy coupled with dendritic silver nanosubstrate for detection of restricted antibiotics

Surface‐enhanced Raman spectroscopy (SERS) coupled with dendritic silver nanosubstrates was used in this study for rapid detection and characterization of restricted antibiotics. Dendritic silver nanosubstrates were prepared through a simple replacement reaction and stored in deionized water for months. SERS methods with near‐IR excitation at 785 nm using silver nanosubstrates were evaluated for detection of three restricted antibiotics (i.e. enrofloxacin, ciprofloxacin, and chloramphenicol) prepared in standard solutions. SERS was capable of identifying and characterizing three antibiotics quickly and accurately. Silver dendrites exhibit satisfactory and consistent performance with an analytical enhancement factor of ∼10⁴. The limit of detection and limit of quantification for antibiotics could reach the level of 20 ppb. Silver dendrites can be kept in deionized water for up to 6 months with no signs of degradation in SERS performance. These results demonstrate a great potential of using SERS coupled with silver dendrites for rapid detection, classification, and quantification of chemical contaminants. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering‐based approach for DNA detection at low concentrations via polyvinyl alcohol‐protected silver grasslike patterns

A simple method is demonstrated to detect DNA at low concentrations on the basis of surface‐enhanced Raman scattering (SERS) via polyvinyl alcohol‐protected silver grasslike patterns (PVA‐Ag GPs) grown on the surface of the common Al substrate. By the SERS measurements of sodium citrate and thymine, the PVA‐Ag GPs are shown to be an excellent SERS substrate with good activity, stability and reproducibility. With the use of the tested molecule of thymine, the enhancement factor of the PVA‐Ag GPs is up to ~1.4 × 10⁸. The PVA‐Ag GPs are also shown to be an excellent SERS substrate with good biocompatibility for DNA detection, and the detection limit is down to ~10⁻⁵ mg/g. Meanwhile, the assignations of the Raman bands and the adsorption behaviors of the DNA molecules are also analyzed. In this work, the geometry optimization and the wavenumber analysis of adenine–Ag and guanine–Ag complexes for the ground states are performed using density functional theory, B3LYP functional and the LanL2DZ basis set. The transition energies and the oscillator strengths of adenine–Ag and guanine–Ag for the lowest six singlet excited states were calculated by using the time‐dependent density functional theory method with the same functional and basis set. The results show that the charge transfer in the adenine–Ag and guanine–Ag complexes should be the chemical factor for the SERS of the DNA molecules. Lastly, this method may be employed in large‐scale preparation of substrates that have been widely applied in the Raman analysis of DNA because the fabrication process is simple and inexpensive. Copyright © 2011 John Wiley & Sons, Ltd.     

Nanoflower-like Ag/AAO SERS platform with quasi-photonic crystal nanostructure for efficient detection of goat serum

An effective SERS-based detection method has been developed to quantitatively diagnose the goat serum which overcomes the problem of diffusion limitation in traditional heterogeneous immunoassay. In this work, the ultra-sensitive silver/anodic aluminum oxide (Ag/AAO) SERS platform was explored via magnetron sputtering which can precisely control the sample morphology and intergap distances. Results indicated that the localized surface plasmon resonance (LSPR) effect was sharply strengthened as the sub-10 nm nanogaps generated and the enhancement factor (EF) for crystal violet (CV) was calculated to be 3.677 × 10⁷. This novel Ag/AAO substrate with substantial “hot spots” exhibited high SERS sensitivity which could obtain extremely low limits of detection (LOD) of 10⁻¹² M for CV. Importantly, this SERS platform was employed to detect goat serum and reached a LOD at 1 ng/μl. As a nondestructive detection technique, our SERS-based methodology required small sample quantity which expected to achieve more biomolecular detection.     

Fabrication and characterization of SERS‐active silver clusters on glassy carbon

In this article, a novel technique for the fabrication of surface enhanced Raman scattering (SERS) active silver clusters on glassy carbon (GC) has been proposed. It was found that silver clusters could be formed on a layer of positively charged poly(diallyldimethylammonium) (PDDA) anchored to a carbon surface by 4‐aminobenzoic acid when a drop containing silver nanoparticles was deposited on it. The characteristics of the obtained silver clusters have been investigated by atomic force microscopy (AFM), SERS and an SERS‐based Raman mapping technique in the form of line scanning. The AFM image shows that the silver clusters consist of several silver nanoparticles and the size of the clusters is in the range 80–100 nm. The SERS spectra of different concentrations of rhodamine 6G (R6G) on the silver clusters were obtained and compared with those from a silver colloid. The apparent enhancement factor (AEF) was estimated to be as large as 3.1 × 10⁴ relative to silver colloid, which might have resulted from the presence of ‘hot‐spots’ at the silver clusters, providing a highly localized electromagnetic field for the large enhancement of the SERS spectra of R6G. The minimum electromagnetic enhancement factor (EEF) is estimated to be 5.4 × 10⁷ by comparison with the SERS spectra of R6G on the silver clusters and on the bare GC surface. SERS‐based Raman mapping technique in the form of line scanning further illustrates the good SERS activity and reproducibility on the silver clusters. Finally, 4‐mercaptopyridine (4‐Mpy) was chosen as an analyte and the lowest detected concentration was investigated by the SERS‐active silver clusters. A concentration of 1.6 × 10⁻¹⁰ M 4‐Mpy could be detected with the SERS‐active silver clusters, showing the great potential of the technique in practical applications of microanalysis with high sensitivity. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of indium–silver bimetallic nanocomposites for surface-enhanced Raman scattering

We report on the synthesis of indium–silver bimetallic nanocomposites by chemical reduction method under atmospheric condition and their activity for surface-enhanced Raman scattering (SERS). It is found that the indium–silver bimetallic nanocomposites have better SERS activity with larger enhancement factors (EF) than pure silver nanoparticles with similar size. The SERS EF can reach 10⁷ for 4-mercaptobenzoic acid and 10⁹ for crystal violet and rhodamine 6G adsorbed on the nanocomposites and the detection limits can be at least down to 10^?7 and 10^?10 M, respectively. The results demonstrate that the indium–silver bimetallic nanocomposites are promising as SERS substrate for a myriad of chemical and biological sensing applications.     

Novel highly sensitive Cu‐based SERS platforms for biosensing applications

Novel surface enhanced Raman spectroscopy (SERS) platforms have been prepared and used for the bacteria detection. Unlike typical, expensive SERS platforms prepared from gold or silver, the presented platforms are prepared using copper. A new, simple, cost‐efficient and fast high pressure method is used for platform fabrication, through the decomposition of copper hydride. The platform enhancement factors are verified using the malachite green isothiocyanate as a standard. The platforms exhibit extremely high SERS enhancement factors depending on pressure used for their preparation. The calculated enhancement factors have been found in the range between 1.5 × 10⁶ and 4.6 × 10⁷. The SERS spectra reproducibility is established both across a single platform and among different platforms. The average spectral correlation coefficient (Γ) has been calculated to be 0.82. Fully characterized SERS platforms have then been used for detecting Staphylococcus aureus bacteria. These novel platforms have great potential to become excellent tools for biological or medical diagnostics as an alternative to more common silver or gold SERS platforms. Copyright © 2015 John Wiley & Sons, Ltd.     

Uric acid detection by means of SERS spectroscopy on dried Ag colloidal drops

Uric acid concentration in human bodily fluids is an important marker for disorders such as gout, pre‐eclamsia or cardiovascular disease. However, currently used methods for its detection either lack sensitivity or require sophisticated, bulky and expensive equipment. In this work, we show that by using surface‐enhanced Raman scattering spectroscopy (SERS) on dried Ag colloidal drops and with 1064 nm excitation, concentrations of uric acid in aqueous solutions down to 10⁻⁶ M can be detected. Such sensitivity is sufficient for medical applications as concentration of uric acid in various bodily fluids are in the range of 10⁻³–10⁻⁴ M. Drying of the colloidal drops is known to result in the formation of ‘coffee‐ring’ structures that allow obtaining high enhancements but poor reproducibility. Here, the formation of the structures was avoided by choosing aluminum oxide as a base substrate and by controlling environment conditions. Despite the fact that variations of signal enhancement from sample to sample prevent quantitative analysis from being performed, the results of this work imply that strict control of sample preparation conditions could lead to obtaining reproducible SERS enhancements. Results of density functional theory calculations of uric acid tautomer – five‐atom silver cluster complexes performed for the first time show that the differences between Raman and SERS spectra of uric acid can be mainly explained by tautomerization of the molecule and its bonding to the silver surface. Assignment of spectral bands is important for correct SERS signal interpretation and detection of uric acid in biological fluids in the future studies. Copyright © 2016 John Wiley & Sons, Ltd.     

Rapid atto‐molar level detection of surface‐enhanced Raman spectroscopy technique based on glycidyl methacrylate–ethylene dimethacrylate (GMA–EDMA) porous material

A novel miniature device for rapid ultra‐sensitive surface‐enhanced Raman scattering (SERS) detection was developed in the present study. The device was made of a syringe, a piece of filter, and a Teflon tube. Therefore, it was with advantages of simplicity, miniaturization, and easy operability. The tube was filled in advance with the glycidyl methacrylate‐ethylene dimethacrylate powder porous material which has been proved to increase the sensitivity of normal SERS dramatically, then the mixture solution containing the analyte, silver colloid, and NaCl solution passed through the porous material by the action of the syringe. SERS signals were collected from the surface of the material. Rhodamine 6G (R6G), p‐aminothiophenol (PATP), and thiabendazole (TBZ) were employed as the probe molecules in the present work. R6G at microlitre‐scale can be detected at an extremely low concentration of 10^–18 mol/l, and the relative standard deviation of spot to spot is 14.16% at the intensity of the band at 609 cm⁻¹. The concentrations of PATP and TBZ that can be detected with the method are 10⁻¹¹ mol/l and 1.3 × 10⁻⁶ mol/l, respectively. This method not only has achieved the ultra‐sensitive detection of dye and pesticide but also realized the simple, rapid, and small sample quantity requirement detection, and it is of great potential use for lots of analytes. Copyright © 2013 John Wiley & Sons, Ltd.