Palladium-catalyzed carbonylation of aryl tosylates and mesylates

A general protocol for the palladium-catalyzed carbonylation of aryl tosylates and mesylates to form esters has been developed using a catalyst system derived from Pd(OAc)2 and the bulky, bidentate dcpp ligand. The system operates under mild conditions: atmospheric CO pressure and temperatures of 80-110 degrees C. A broad substrate scope has been demonstrated allowing carbonylation of electron-rich, electron-poor, and heterocyclic tosylates and mesylates, and the reaction shows wide functional group tolerance.     

NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Magnesiation of electron-rich aryl bromides and their use in nickel-catalyzed cross-coupling reactions

Electron-rich aryl bromides are rapidly converted to the corresponding lithium triarylmagnesiates with (n-Bu)3MgLi, which undergo efficient nickel-catalyzed Kumada-Corriu cross-coupling reactions with a variety of aryl and alkenyl bromides, chlorides, tosylates, and triflates.     

One-pot primary aminomethylation of aryl and heteroaryl halides with sodium phthalimidomethyltrifluoroborate

A one-pot primary aminomethylation of aryl halides, triflates, mesylates, and tosylates via Suzuki-Miyaura cross-coupling reactions with sodium phthalimidomethyltrifluoroborate followed by deamidation with ethylenediamine is reported.     

Decarboxylative Aminomethylation of Aryl‐ and Vinylsulfonates through Combined Nickel‐ and Photoredox‐Catalyzed Cross‐Coupling

A mild approach for the decarboxylative aminomethylation of aryl sulfonates by the combination of photoredox and nickel catalysis through C?O bond cleavage is described for the first time. A wide range of aryl triflates as well as aryl mesylates, tosylates and alkenyl triflates afford the corresponding products in good to excellent yields.     

Two-step, one-pot Ni-catalyzed neopentylglycolborylation and complementary Pd/Ni-catalyzed cross-coupling with aryl halides, mesylates, and tosylates

Two-step, one-pot neopentylglycolborylation of aryl iodides and bromides catalyzed by NiCl2(dppe) and NiCl2(dppp) is reported. Electron-rich and electron-deficient aryl neopentylglycolboronates were efficiently cross-coupled with aryl iodides, bromides, chlorides, mesylates, and tosylates by exploiting complementary Pd/Ni and Ni/Ni catalysis. The borylation route was further extended to a three-step, one-pot synthesis of biaryls via in situ Ni-catalyzed borylation and Pd-mediated cross-coupling.     

Nickel-catalyzed C-H/C-O coupling of azoles with phenol derivatives

The first nickel-catalyzed C-H bond arylation of azoles with phenol derivatives is described. The new Ni(cod)(2)/dcype catalytic system is active for the coupling of various phenol derivatives such as esters, carbamates, carbonates, sulfamates, triflates, tosylates, and mesylates. With this C-H/C-O biaryl coupling, we synthesized a series of privileged 2-arylazoles, including biologically active alkaloids. Moreover, we demonstrated the utility of the present reaction for functionalizing estrone and quinine.     

N-Heterocyclic Carbene-Palladium(II)-1-Methylimidazole Complex-Catalyzed Suzuki-Miyaura Coupling of Aryl Sulfonates with Arylboronic Acids

A well-defined NHC-Pd(II)-Im complex 1 was found to be an effective catalyst for the Suzuki-Miyaura coupling of aryl sulfonates including tosylates and phenylsulfonates with arylboronic acids, giving the desired coupling products in good to high yields. Acceptable yields can also be achieved even by using the less reactive mesylates as the substrates. It is worthy of noting here that this is the first example of NHC-Pd(II) complex-catalyzed Suzuki-Miyaura coupling of aryl sulfonates with arylboronic acids, enriching an inexpensive, convenient, and alternative method for the synthesis of biaryl compounds.     

Copper‐Catalyzed Reductive Cross‐Coupling of Nonactivated Alkyl Tosylates and Mesylates with Alkyl and Aryl Bromides

A copper‐catalyzed reductive cross‐coupling reaction of nonactivated alkyl tosylates and mesylates with alkyl and aryl bromides was developed. It provides a practical method for efficient and cost‐effective construction of aryl–alkyl and alkyl–alkyl C?C bonds with stereocontrol from readily available substrates. When used in an intramolecular fashion, the reaction enables convenient access to various substituted carbo‐ or heterocycles, such as 2,3‐dihydrobenzofuran and benzochromene derivatives.     

Comparison of arylboron-based nucleophiles in Ni-catalyzed Suzuki-Miyaura cross-coupling with aryl mesylates and sulfamates

The efficiency of arylboron-based nucleophiles, boronic acid, potassium trifluoroborate, neopentylglycolboronate, and pinacol boronate in nickel-catalyzed Suzuki-Miyaura cross-coupling reactions with the two C-O electrophiles, mesylates, and sulfamates was compared. Arylboronic acid is the most reactive and most atom-economic of the four boron species studied. Arylpotassium trifluoroborate cross-couples efficiently only in the presence of water. In the absence of water, aryl neopentylglycolboronate is more efficient, less expensive, and more atom-economic than aryl pinacolboronate.     

trans-Chloro(1-naphthyl)bis(triphenylphosphine)nickel(II)/PCy3 catalyzed cross-coupling of aryl and heteroaryl neopentylglycolboronates with aryl and heteroaryl mesylates and sulfamates at room temperature

trans-Chloro(1-naphthyl)bis(triphenylphosphine)nickel(II) complex/PCy(3) system has been successfully applied as catalyst for the Suzuki-Miyaura cross-coupling of aryl and heteroaryl neopentylglycolboronates with aryl and heteroaryl mesylates and sulfamates in THF at room temperature. This cross-coupling reaction tolerates various functional groups, including keto, imino, ester, ether, and cyano. Together with the nickel-catalyzed, one-pot, two-step neopentylglycolborylation, this bench stable and inexpensive Ni(II)-based catalyst can be utilized as an alternative to Ni(COD)(2)/PCy(3) to provide an inexpensive, robust, and convenient synthesis of biaryl and heterobiaryl compounds.     

Transition metal σ-complexes in organic synthesis. 4. Cross coupling of allyl esters and allyl aryl sulfones with organotitanium compounds in the presence of palladium complexes

Conclusions The reactions of organotitanium compounds PhTi(OPr-i)₃ and MeTi(OPr-i)₃ with allyl acetates, allyl phenyl ethers, allyl aryl sulfones, and allylic tosylates and mesylates are catalyzed by Pd complexes and lead to the formation of cross-coupling products.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 2159–2166, September, 1988.     

Cobalt co-catalysis for cross-electrophile coupling: diarylmethanes from benzyl mesylates and aryl halides

The nickel-catalyzed cross-coupling of aryl halides with alkyl radicals derived from alkyl halides has recently been extended to couplings with carbon radicals generated by a co-catalyst. In this study, a new co-catalyst, cobalt phthalocyanine (Co(Pc)), is introduced and demonstrated to be effective for coupling substrates not prone to homolysis. This is because Co(Pc) reacts with electrophiles by an S_N2 mechanism instead of by the electron-transfer or halogen abstraction mechanisms previously explored. Studies demonstrating the orthogonal reactivity of (bpy)Ni and Co(Pc), applying this selectivity to the coupling of benzyl mesylates with aryl halides, and the adaptation of these conditions to the less reactive benzyl phosphate ester and an enantioconvergent reaction are presented.     

Highly efficient nickel/phosphine catalyzed cross-couplings of diarylborinic acids with aryl tosylates and sulfamates

<正>4-Methoxy-4′-methylbiphenyl(3aa) [1] MeO White solid(0.324 g, 82% from aryl tosylate, 0.356 g, 90% from aryl sulfamate); m.p. 111–112 °C; 1H NMR(400 MHz,CDCl3) δ 7.50(d, J = 8.4 Hz, 2H), 7.44(d, J = 8.0 Hz, 2H), 7.21(d, J = 8.0 Hz, 2H), 6.95(d, J = 8.8 Hz, 2H), 3.82(s, 3H), 2.37(s, 3H); 13 C NMR(100 MHz, CDCl3) δ 159.0, 138.0, 136.4, 133.8, 129.5, 128.0, 126.6, 114.2, 55.4, 21.1. 4,4′-Dimethylbiphenyl(3ab) [1] White solid(0.320 g, 88% from aryl tosylate, 0.346 g, 95% from aryl sulfamate); m.p. 122–123 °C; 1H NMR(400 MHz,CDCl3) δ 7.47(d, J = 8.0 Hz, 4H), 7.22(d, J = 8.0 Hz, 4H), 2.37(s, 6H); 13 C NMR(100 MHz, CDCl3) δ 138.4, 136.8, 129.5, 126.9, 21.2.     

Nickel‐Catalyzed Mizoroki–Heck Reaction of Aryl Sulfonates and Chlorides with Electronically Unbiased Terminal Olefins: High Selectivity for Branched Products

Achieving high selectivity in the Heck reaction of electronically unbiased alkenes has been a longstanding challenge. Using a nickel‐catalyzed cationic Heck reaction, we were able to achieve excellent selectivity for branched products (≥19:1 in all cases) over a wide range of aryl electrophiles and aliphatic olefins. A bidentate ligand with a suitable bite angle and steric profile was key to obtaining high branched/linear selectivity, whereas the appropriate base suppressed alkene isomerization of the product. Although aryl triflates are traditionally used to access the cationic Heck pathway, we have shown that, by using triethylsilyl trifluoromethanesulfonate, we can effect a counterion exchange of the catalytic nickel complex, such that cheaper and more stable aryl chlorides, mesylates, tosylates, and sulfamates can be used to yield the same branched products with high selectivity.     

Generation of Organozinc Reagents by Nickel Diazadiene Complex Catalyzed Zinc Insertion into Aryl Sulfonates

The generation of arylzinc reagents (ArZnX) by direct insertion of zinc into the C−X bond of ArX electrophiles has typically been restricted to iodides and bromides. The insertions of zinc dust into the C−O bonds of various aryl sulfonates (tosylates, mesylates, triflates, sulfamates), or into the C−X bonds of other moderate electrophiles (X=Cl, SMe) are catalyzed by a simple NiCl₂–1,4-diazadiene catalyst system, in which 1,4-diazadiene (DAD) stands for diacetyl diimines, phenanthroline, bipyridine and related ligands. Catalytic zincation in DMF or NMP solution at room temperature now provides arylzinc sulfonates, which undergo typical catalytic cross-coupling or electrophilic substitution reactions.     

Palladium-catalyzed amination of aryl and heteroaryl tosylates at room temperature

Mild palladium-catalyzed aminations of aryl tosylates and the first aminations of heteroaryl tosylates are described. In the presence of the combination of L2Pd(0) (L = P(o-tol)3) and the hindered Josiphos ligand CyPF-t-Bu, a variety of primary alkylamines and arylamines react with both aryl and heteroaryl tosylates at room temperature to form the corresponding secondary arylamines in high yields with complete selectivity for the monoarylamine. These reactions at room temperature occur in many cases with catalyst loadings of 0.1 mol % and 0.01 mol % in one case, constituting the most efficient aminations of aryl tosylates by nearly 2 orders of magnitude. This catalyst is made practical by the development of a convenient method to synthesize the L2Pd(0) precursor. This complex is stable to air as a solid. In contrast to conventional relative rates for reactions of aryl sulfonates, the reactions of aryl tosylates are faster than parallel reactions of aryl triflates, and the reactions of aryl tosylates are faster than parallel or competitive reactions of aryl chlorides.     

Oxidative addition of aryl tosylates to palladium(0) and coupling of unactivated aryl tosylates at room temperature

Aryl tosylates are attractive substrates for Pd-catalyzed cross-coupling reactions, but they are much less reactive than the more commonly used aryl triflates. We report the oxidative addition of aryl tosylates to Pd(PPF-t-Bu)[P(o-tolyl)3] and to Pd(CyPF-t-Bu)[P(o-tolyl)3] at room temperature to produce the corresponding palladium(II) aryl tosylate complexes. In the presence of added bromide ions, arylpalladium(II) bromide complexes were formed. The rate of oxidative addition was accelerated by addition of either coordinating or weakly coordinating anions, and the reactions were faster in more polar solvents. The mild conditions for oxidative addition allowed for the development of Pd-catalyzed Kumada couplings and amination reactions of unactivated aryl tosylates at room temperature. The catalysts for these mild couplings of aryl tosylates were generated from palladium precursors and the sterically hindered Josiphos-type ligands that induced oxidative addition of aryl tosylates to Pd(0) at room temperature.     

Ligation state of nickel during CO bond activation with monodentate phosphines

The oxidative addition of phenolic electrophiles at Ni(0) in the presence of monodentate phosphine ligands was studied with both dispersion-free and dispersion-containing DFT methods. With the popular bulky ligand PCy₃, consideration of dispersion has a striking effect on the predicted ligation state of nickel during oxidative addition of aryl sulfamates. Dispersion-containing methods such as M06L indicate a clear preference for a bis-phosphine ligated transition state (TS), while dispersion free methods like B3LYP strongly favor a mono-phosphine ligated TS. This discrepancy in predicted ligation state is also found with small phosphines (PMe₃) in combination with some aryl electrophiles (carbamates, acetates, pivalates, chlorides), but a bis-PMe₃-ligated TS is predicted regardless of dispersion for other electrophiles (sulfamates, mesylates, tosylates). DFT calculations that include dispersion also offer a possible explanation for the observed poor efficacy of P^tBu₃ as a ligand in Ni-catalyzed cross-coupling reactions.     

2,2-Bis(methoxy- and ethoxy-NNO-azoxy)propane-1,3-diol sulfonates

2,2-Bis(alkoxy-NNO-azoxy)propane-1,3-diols react with sulfonyl chlorides and trifluoromethanesulfonic anhydride in the presence of bases affording previously unknown methane-, trifluoromethane-, benzene and toluenesulfonates (sulfonic esters) of 2-bis(methoxy- and ethoxy-NNO-azoxy)propane-1,3-diols. The triflates are thermally less stable than mesylates, benzenesulfonates, and tosylates of the corresponding diols.