Spectrophotometric determination of hyoscine butylbromide and famciclovir in pure form and in pharmaceutical formulations

A simple, rapid, and extractive spectrophotometric method was developed for the determination of hyoscine butylbromide (HBB) and famciclovir (FCV) in pure and pharmaceutical formulations. These methods are based on the formation of yellow ion-pair complexes between the basic nitrogen of the drug and four sulphonphthalein acid dyes, namely; bromocresol green (BCG), bromothymol blue (BTB), bromocresol purple (BCP) and bromophenol blue (BPB) in phthalate buffer of pH range (3.0-3.5). The formed complexes were extracted with chloroform and measured at 420, 412, 409 and 415nm for HBB and at 418, 412, 407 and 414nm for FCV using BCG, BTB, BCP and BPB, respectively. The analytical parameters and their effects on the reported systems are investigated. Beer's law was obeyed in the range 1.0-20mugmL(-1) with correlation coefficient (n=6)>/=0.9997. The molar absorptivity, Sandell sensitivity, detection and quantification limits were also calculated. The composition of the ion pairs was found 1:1 by Job's method in all cases and the conditional stability constant (K(f)) of the complexes have been calculated. The free energy changes (DeltaG) were determined for all complexes formed. The proposed methods have been applied successfully for the analysis of the studied drugs in pure and pharmaceutical formulations with percentage recoveries ranges from 99.84 to 100.26. The results were in good agreement with those obtained by the official methods.     

A new spectrophotometric method for the determination of finasteride in tablets

A simple, rapid, accurate, precise and sensitive colorimetric method for the determination of finasteride in tablets is described. The proposed methods are based on the formation of ion-pair complexes between the examined drug with bromophenol blue (BPB), bromocresol green (BCG) and bromothymol blue (BTB), which can be measured at the optimum lambda(max). Beer's law is obeyed in the concentration ranges 3.0-15.0, 3.0-15.0 and 5.0-20 microg/mL with BPB, BCG and BTB, respectively. The detection limits of FIN was found to be 1.16 microg/mL for BPB, 1.17 for BCG, 1.76 microg/mL for BTB. All the methods gave similar results and were validated for selectivity, linearity, precision and sensitivity. The proposed methods were directly and easily applied to the pharmaceutical preparation with accuracy, resulting from recovery experiments between 100.11 and 100.33% for BPB, 100.17 and 100.67% for BCG and 100.33 and 100.60% for BTB methods. The low relative standard deviation values indicate good precision and high recovery values indicate accuracy of the proposed methods. The proposed methods have been applied to the determination of drug in commercial tablets. Results obtained from the analysis of commercial preparations with the proposed methods are in good agreement with those obtained with the official HPLC method.     

Spectrophotometric Determination of Dextromethorphan Hydrobromide and Ketamine Hydrochloride in Pure and Dosage Forms

Three simple, sensitive and accurate spectrophotometric methods have been developed for the determination of dextromethorphan hydrobromide (DEX) and ketamine hydrochloride (KET) in dosage forms. These methods are based on the formation of ion‐pair complexes with bromocresol green (BCG), bromocresol purple (BCP), and bromophenol blue (BPB) in acidic medium. The coloured ion‐pair products are measured at 419, 409 and 417 nm for DEX and at 417, 408 and 416 nm for KET using BCG, BCP and BPB, respectively. Beer's law was obeyed in the range of 2.0–22 μg mL^?1 for DEX and 2.0–16 μg mL^?1 for KET. The composition of the ion‐pair was established by continuous variation and molar ratio methods. The proposed methods were applied successfully for the determination of DEX and KET in dosage forms applying the standard addition technique and compared statistically with the official methods. The molar absorptivity, Sandell sensitivity, detection and quantification limits were also calculated.     

Heteroassociation of the bromine-containing anions of sulfophthaleins in aqueous solution

The ability of bromine-containing anions of sulfophthalein dyes, such as bromophenol blue (BPB), bromocresol green (BCG), bromocresol purple (BCP), bromothymol blue (BTB), as well as non-substituted phenol red (PhR), to form heteroassociates in aqueous solution was investigated. Singly and doubly charged anions BPB, BCG, BCP, BTB, and PhR (HAn^-, An^2-) are capable of forming stable heteroassociates of composition Ct⁺•HAn^- and (Ct+)2•An^2- with cationic polymethine dyes (Ct+), such as pinacyanol and quinaldine red. The enthalpies of formation of the dye ions and heteroassociates were calculated by semiempirical methods, and the most probable structure of heteroassociates was determined.     

Spectrophotometric methods for the determination of the antidepressant drug paroxetine hydrochloride in tablets

Simple, sensitive, and accurate visible spectrophotometric methods are described for the determination of paroxetine hydrochloride (PA) in tablets. Among them, the first 3 methods are based on the ion-pair complexes of PA formed with bromothymol blue (BTB), bromophenol blue (BPB), and bromocresol green (BCG) in aqueous acidic buffers. The complex species extracted into chloroform were quantitatively measured at 414 nm with BTB and BCG and at 412 nm with BPB. Beer's law was obeyed over the concentration ranges of 2-20, 2-16, and 2-16 microg/mL, respectively. The fourth method described is based on a coupling reaction between PA and 7-chloro-4-nitrobenzofurazon (NBD-Cl) in borate buffer, pH 8.5, in which a yellow reaction product that was measured at 478 nm was formed. The Beer's law range for this method was 2-10 microg/mL. The last method developed describes the interaction of PA base, as an n-electron donor, with 7,7,8,8-tetracyanoquinodimethane (TCNQ), as a pi-acceptor, in acetonitrile to give blue-colored TCNQ- radical anion with absorption maxima at 750 and 845 nm. Measured at 845 nm, the absorbance-concentration plot was rectilinear over the range of 1.5-15 microg/mL. The new methods developed were successfully applied to the determination of PA in tablets without any interference from common tablet excipients. The results of the methods were in good agreement with those obtained with an official liquid chromatographic method. This report describes first colorimetric methods for the determination of PA.     

Sensitive extractive spectrophotometric methods for the determination of trazodone hydrochloride in pharmaceutical formulations

Two simple, rapid and sensitive extractive spectrophotometric methods have been developed for the assay of trazodone hydrochloride (TRH) in pure and pharmaceutical formulations. These methods are based on the formation of chloroform soluble ion-association complexes of TRH with bromothymol blue (BTB) and with bromocresol purple (BCP) in KCl-HCl buffer of pH 2.0 (for BTB) and in NaOAc-AcOH buffer of pH of 3.6 (for BCP) with absorption maximum at 423 nm and at 408 nm for BTB and BCP, respectively. Reaction conditions were optimized to obtain the maximum color intensity. The absorbance was found to increase linearly with increase in concentration of TRH, which was corroborated by the calculated correlation coefficient values (0.9996, 0.9945). The systems obeyed Beer's law in the range of 0.2-14.5 and 0.2-14.1 microg/ml for BTB and BCP, respectively. Various analytical parameters have been evaluated and the results have been validated by statistical data. No interference was observed from common excipients present in pharmaceutical formulations. The proposed methods are simple, accurate and suitable for quality control applications.     

Spectrophotometric quantification of fluoxetine hydrochloride: Application to quality control and quality assurance processes

Simple and rapid spectrophotometric methods have been developed for the microdetermination of fluoxetine HCl. The proposed methods are based on the formation of ion-pair complexes between fluoxetine and bromophenol blue (BPB), bromothymol blue (BTB), bromocresol green (BCG), and bromocresol purple (BCP) which can be measured at optimum λ_max. Optimization of reaction conditions was investigated. Beerșs law was obeyed in the concentration ranges of 0.5–8.0 μg mL⁻¹, whereas optimum concentration as adopted from the Ringbom plots was 0.7–7.7 μg mL⁻¹. The molar absorptivity, Sandell sensitivity, and detection limit were also calculated. The most optimal and sensitive method was developed using BCG. The correlation coefficient was 0.9988 (n = 6) with a relative standard deviation of 1.25, for six determinations of 4.0 μg mL⁻¹. The proposed methods were successfully applied to the determination of fluoxetine hydrochloride in its dosage forms and in biological fluids (spiked plasma sample) using the standard addition technique.     

Spectrophotometric determination of dopaminergic drugs used for Parkinson's disease, cabergoline and ropinirole, in pharmaceutical preparations

Simple and reproducible spectrophotometric methods have been developed for determination of dopaminergic drugs used for Parkinson's disease, cabergoline (CAB) and ropinirole hydrochloride (ROP), in pharmaceutical preparations. The methods are based on the reactions between the studied drug substances and ion-pair agents [methyl orange (MO), bromocresol green (BCG) and bromophenol blue (BPB)] producing yellow colored ion-pair complexes in acidic buffers, after extracting in dichloromethane, which are spectrophotometrically determined at the appropriate wavelength of ion-pair complexes. Beer's law was obeyed within the concentration range from 1.0 to 35 microg ml(-1). The developed methods were applied successfully for the determination of these drugs in tablets.     

UV–Second Derivative Spectrophotometric and Colorimetric Methods for the Determination,Validation and Thermogravimetric Analysis of New Oral Antidiabetic Pioglitazone in Pure and Pharmaceutical Preparations

Abstract

Three rapid, sensitive, and simple spectrophotometric methods have been developed for the determination of pioglitazone in pure and pharmaceutical preparations.

For the first method, UV-spectrophotometry, standard solutions were measured at 270.2 nm. The first method was linear from 5.0–20.0 µgmL^?1. The linearity was found to be 5.0–20.0 µgmL^?1. For the second method, the distances between two extremum values (peak-to-peak amplitudes), 272.0 and 287.4 nm were measured in the second order derivative-spectra of standard solutions. Calibration curves were constructed by plotting d² A/dλ² values against concentrations, 2.0–12.0 µgmL^?1 of pioglitazone standards in acetonitrile. The detection limits of pioglitazone were 0.10 and 0.16 µgmL^?1 for UV and derivative spectrophotometric methods, respectively. The third method was based on the formation of an ion association complex with bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB), and bromothymol blue (BTB). The assay was linear over the concentration range of 20.0–100.0 µgmL^?1 for BCG, 10.0–100.0 µgmL^?1 for BCP, 20.0–120.0 µgmL^?1 for BPB, and 10.0–100.0 µgmL^?1 for BTB. The detection limits of pioglitazone was found to be 0.14 µg mL^?1 for BCG, 0.32 for BCP, 1.24 µgmL^?1 for BPB, and 0.22 µgmL^?1 for BTB. The thermal analysis of the pioglitazone was studied by Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC) techniques. Enthalpy change of pioglitazone was found to be 85.16 J/g. The proposed methods were validated according to the ICH guidelines (1996) with respect to specificity, linearity, limits of detection and quantification, accuracy, precision, and robustness. The results demonstrated that the procedure is accurate, precise, specific, and reproducible (percent relative standard deviation <2%), while being simple and less time consuming. The three proposed methods have been successfully applied to the assay of pioglitazone in pure and in pharmaceutical preparations. The results compared with those obtained by an ultraviolet spectrophotometric method using t and F tests.     

Extraction-spectrophotometric determination of amprolium hydrochloride using bromocresol green, bromophenol blue and bromothymol blue

A new procedure for the determination of amprolium hydrochloride by reaction with bromocresol green (BCG), bromophenol blue (BPB) and bromothymol blue (BTB) has been developed. The method consists of extracting the yellow ion-pair formed into chloroform from aqueous medium. The ion-pairs have absorption maxima at 420, 410 and 415 nm with molar absorptivities of 3.64 × 10⁴, 3.12 × 10⁴ and 2.31 × 10⁴1 mol^–1 cm^–1 for BCG, BPB and BTB, respectively. The method obeys Beer's law over the concentration ranges 0.6–12.0, 0.12–8.8 and 1.2–11.3 ag/ml amprolium hydrochloride for BCG, BPB and BTB, respectively. The method is simple, precise (relative standard deviation 0.665–2.210%), accurate (recovery 97.8–100.8%) and easily applied for pharmaceutical quality assurance for amprolium hydrochloride in raw materials and in formulated veterinary soluble powder.     

秋水仙碱水解产物与某些酸性磺酞类染料相互作用的 共振瑞利散射光谱及其分析应用

在pH 2.9～4.6 Britton-Robinson (BR)缓冲溶液中, 秋水仙碱的水解产物(H-COL)能与溴酚蓝(BPB)、溴甲酚绿(BCG)、溴百里酚蓝(BTB)和百里酚蓝(TB)等酸性磺酞类染料(ASPD)反应形成1∶1的离子缔合物, 此时将引起共振瑞利散射(RRS)的急剧增强, 并产生新的RRS光谱. 秋水仙碱水解产物与溴酚蓝、溴甲酚绿、溴百里酚蓝和百里酚蓝形成离子缔合物的最大散射波长分别位于327, 311, 305和306 nm处. 散射增强(ΔI)与秋水仙碱浓度在一定范围内成正比, 不同体系对于秋水仙碱的检出限(3σ)分别为12.3, 15.1, 16.4和20.0 ng&#8226;mL－1 (TB). 研究了适宜的反应条件, 考察了共存物质的影响, 表明方法有较好的选择性. 基于秋水仙碱水解产物与酸性磺酞类染料离子缔合物的反应, 发展了一种较灵敏, 且简便、快捷测定秋水仙碱的新方法. 方法用于片剂、黄花、血清和尿样中秋水仙碱的测定, 获得了满意的结果.     

Extractive-spectrophotometric methods for determination of anti-Parkinsonian drug in pharmaceutical formulations and in biological samples using sulphonphthalein acid dyes

A simple, accurate and highly sensitive spectrophotometric methods are proposed for the rapid and accurate determination of amantadine HCl (AMD) using bromocressol green (BCG), bromophenol blue (BPB) and bromothymol blue (BTB). The developed methods involve formation of stable yellow colored chloroform extractable ion-associate complexes of the amino derivative (basic nitrogen) of the AMD with three sulphonphthalein acid dyes, namely; BCG, BPB and BTB, in acidic medium. The ion-associates exhibit absorption maxima at 415, 412 and 414 nm for BCG, BPB and BTB, respectively. AMD can be determined up to 1.5–16.5, 1.4–14.0 and 1.6–17 μg mL^?1, respectively. The effect of optimum conditions via acidity, reagent concentration, time, and solvent was studied. The stoichiometry of the reaction was found to be 1:1 in all cases. The low relative standard deviation values indicate good precision and high recovery values. These methods have been successfully applied for the assay of AMD in pharmaceutical formulations. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Extractive spectrophotometric methods for determination of zolmitriptan in tablets

Two simple and sensitive extractive spectrophotometric methods have been developed for determination of zolmitriptan (ZTP) in tablets. These methods are based on the formation of yellow ion-pair complexes between ZTP and tropaeolin OO (TPOO) and bromothymol blue (BTB) in citrate-phosphate buffer of pH 4.0 and 6.0, respectively. The formed complexes were extracted with dichloromethane and measured at 411.5 and 410 nm for TPOO and BTB, respectively. The best conditions of the reactions were studied and optimized. Beer's law was obeyed in the concentration ranges of 2-20 and 1.5-17 microg/mL with molar absorptivities of 1.42 x 10(4) and 1.60 x 10(4) L/mol/cm for the TPOO and BTB methods, respectively. Correlation coefficients were 0.9998 and 0.9999 for TPOO and BTB methods, respectively. Limits of detection of the TPOO and BTB methods were 0.341 and 0.344 microg/mL, respectively, and the limits of quantitation were 1.034 and 1.051 microg/mL, respectively. Sandell's sensitivity and stability constant were also calculated. The proposed methods have been applied successfully for the analysis of the drug in its dosage forms. No interference was observed from excipients present in tablets. Statistical comparison of the results with those obtained by a high-performance liquid chromatography method showed excellent agreement and indicated no significant differences in accuracy and precision.     

Spectrophotometric methods for sertraline hydrochloride and/or clidinium bromide determination in bulk and pharmaceutical preparations

A spectrophotometric procedure for the determination of sertraline hydrochloride (Sert) and/or clidinium bromide (Clid) in bulk sample and in dosage forms was developed. The purpose of this work was to develop a rapid, simple, inexpensive, precise, and accurate visible spectrophotometric method. The procedure is based on formation of an ion-pair complex by their reaction with bromocresol green (BCG), bromophenol blue (BPB), and bromothymol blue (BTB) in buffered aqueous solution at pH 3. The colored products are extracted into a polar solvent and measured spectrophotometrically at the optimum λ_max for each complex. Optimization of different experimental conditions is described. Regression analysis of Beer-Lambert plots showed good correlation in the concentration range of 1–30 μg mL⁻¹. The apparent molar absorptivity, Sandell sensitivity, detection and quantification limits were calculated. For more accurate analysis, Ringbom optimum concentration range of 2–27 μg mL⁻¹ was used. The developed methods were successfully applied for the determination of sertraline hydrochloride and clidinium bromide in bulk in pharmaceutical formulations without any interference from common excipients. The procedure has the advantage of being highly sensitive and simple for the determination of the studied drugs, weak UV-absorbing compounds.     

Extractive spectrophotometric methods for the assay of sildenafil citrate (Viagra) in pure form and in pharmaceutical formulations

Two simple and sensitive extractive spectrophotometric methods for the determination of sildenafil citrate (SC) are proposed. The methods are based on the formation of ion-association complexes of sildenafil citrate with bromocresol green (BCG, method A) and with chromoxane cyanine R (CCR, method B) in aqueous acidic buffer. The complex species, extractable to chloroform phase, were quantitatively measured at 415 and 460 nm for methods A and B, respectively. Beer's law was obeyed in the SC concentration range 1.25-25 mug ml(-1) with a limit of detection 0.16 mug ml(-1) and 1.5-60 mug ml(-1) with a limit of detection 0.18 mug ml(-1), respectively, for methods A and B. The methods have been successfully applied to the analysis of bulk drug and its tablets. No interference was observed from common pharmaceutical adjuvants.     

Two simple and rapid spectrophotometric methods for the determination of a new antihypertensive drug olmesartan in tablets

Two simple, rapid and reproducible spectrophotometric methods have been described for the assay of olmesartan (OLM) in pharmaceutical formulation. The methods are based on the formation of ion associates in the reactions between the studied drug substance and ion-pair agents [bromocresol green (BCG) and bromophenol blue (BPB)]. By the extraction with dichloromethane and chloroform, yellow-colored ion associates were formed in acidic medium and absorbances were measured at 409 (BCG) and 412 nm (BPB). Optimizations of the reaction conditions were performed. Beer’s law was obeyed within the concentration range from 1–40 μg/mL and 10–120 μg/mL, respectively, for BCG and BPB. The molar absorptivity, detection and quantification limits were also determined. The developed methods were applied successfully to the determination of this drug in tablets.     

Spectrophotometric determination of carbamazepine and mosapride citrate in pure and pharmaceutical preparations

Simple, rapid and sensitive spectrophotometric methods were developed for the determination of carbamazepine and mosapride citrate drugs in pure and pharmaceutical dosage forms. These methods are based on ion pair and charge transfer complexation reactions. The first method is based on the reaction of the carbamazepine drug with Mo(V)–thiocyanate in hydrochloric acid medium followed by an extraction of the coloured ion-pair with 1,2-dichloroethane and the absorbance of the ion pair was measured at 470 nm. The second method is based on the formation of ion-pairs between mosapride citrate and two dyestuff reagents namely bromothymol blue (BTB) and bromocresol green (BCG) in a universal buffer of pH 4 and 3, respectively. The formed ion-pairs are extracted with chloroform and methylene chloride and measured at 412 and 416 nm for BTB and BCG reagents, respectively. The third method is based on charge transfer complex formation between mosapride citrate (electron donor) and DDQ (π-acceptor reagent) and the absorbance of the CT complexes was measured at 450 nm. All the optimum conditions are established. The calibration graphs are rectilinear in the concentration ranges 10–350 for carbamazepine using Mo(V)–thiocyanate and 4–100, 4–60 and 10–150 μg mL^?1 for mosapride citrate using BTB, BCG and DDQ reagents, respectively. The Sandell sensitivity (S), molar absorptivity, correlation coefficient, regression equations and limits of detection (LOD) and quantification (LOQ) are calculated. The law values of standard deviation (0.04–0.09 for carbamazepine using Mo(V)–thiocyanate and 0.022–0.024, 0.013–0.018 and 0.013–0.020 for mosapride citrate using BTB, BCG and DDQ, respectively) and relative standard deviation (0.630–2.170 for carbamazepine using Mo(V)–thiocyanate and 0.123–1.43, 0.102–0.530 and 0.226–1.280 for mosapride citrate using BTB, BCG and DDQ, respectively) reflect the accuracy and precision of the proposed methods. The methods are applied for the assay of the two investigated drugs in pharmaceutical dosage forms. The results are in good agreement with those obtained by the official method.     

Liquid-liquid distribution of ion-associates of acidic dyes with quaternary ammonium counter-ions

Diprotic acid dyes [H(2)A: Bromophenol Blue (BPB), Bromochlorophenol Blue (BCPB), Bromocresol Purple (BCP), Bromocresol Green (BCG), Bromothymol Blue (BTB)] can be extracted as 1:1 ion-associates Q(+)HA(-) and 1:2 ion-associates (Q(+))(2)A(2-) with quaternary ammonium cations (Q(+)) into chloroform. The extraction constants (log K(ex)) of the 1:1 and 1:2 ion-associates have been determined. Linear relationships between log K(ex) and the number of methylene groups in the quaternary ammonium ions were observed; from the slope of the line, the contribution of a methylene group to log K(ex) was found to be 0.43-0.65. The extractability with alkyltrimethylammonium cations was larger than that with symmetrical tetra-alkylammonium cations, for both the 1:1 and 1:2 ion-associates. From the extraction constants obtained, the extractability of acidic dyes was in the order BTB > BCG > BPB > BCPB > BCP.     

Three Spectrophotometric Methods for the Determination of Oxomemazine Hydrochloride in Bulk and in Pharmaceutical Formulations Using Bromocresol Green,Congo Red,and Methyl Orange

Abstract

Three simple, sensitive, and highly accurate spectrophotometric methods have been developed for the determination of oxomemazine hydrochloride (OXO‐HCl) in bulk and in pharmaceutical formulations. These methods are based on the formation of yellow ion‐pair complexes between the examined drug and bromocresol green (BCG), congo red (CR), and methyl orange (MO) as reagents in universal buffer solution of pH 3.0, 5.5, and 3.5, respectively. The formed complexes were extracted with chloroform and measured at 413, 495, and 484 nm, respectively for the three systems. The best conditions of the reaction were studied and optimized. Beer's law was obeyed in the concentration ranges 2.0–18.0, 2.0–14.0, and 2.0–16.0 µg ml^?1 with molar absorptivity of 4.1×10⁴, 1.1×10⁴, and 3.5×10⁴ mol^?1cm^?1, for the BCG, CR, and MO methods, respectively. Sandell's sensitivity, correlation coefficient, detection, and quantification limits are also calculated. The proposed methods have been applied successfully for the analysis of the drug in pure and in its dosage forms. No interference was observed from common pharmaceutical excipients and additives. Statistical comparison of the results with those obtained by HPLC method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Spectrophotometric Determination of Trimethoprim in Pure Form and in Pharmaceutical Preparations using Bromothymol Blue,Bromocresol Green and Alizarin Red S

ABSTRACT

Simple, sensitive and selective methods for the determination of trimethoprim (TMP) in pure form and in pharmaceutical formulations are described. The methods are based on the reaction of TMP as a π-electron donor with bromothymol blue (BTB), bromocresol green (BCG) and alizarin red S (ARS) as electron acceptors. The coloured products are quantified spectrophotometrically at their corresponding λ_max.

Beer's law is obeyed in case of BTB in the range 2.9-23.2 μg/ml (CHCl₃), 2.9-20.0 μg/ml (CH₂Cl₂) and 5.0-29.0 μg/ml (ClC₆H₅), in the case of BCG 2.9-27.5 μg/ml (H₂O/alc.), 2.9-18.3 μg/ml (CHCl₃) and 2.9-20.3 μg/ml (CH₂Cl₂) and for ARS in the range 3.0-12.0 μg/ml in H₂O/alc medium.

The specific absorptivities, molar absorptivities, Sandell sensitivities, standard deviations and percent recoveries are evaluated. Application of the suggested methods to dosage forms is presented and compared with the pharmacopoeial method. The interference from additives and sulfa compounds, especially sulfamethoxazole, has been overcome by extraction into chloroform or methylene chloride.