High-performance liquid chromatographic determination of furfural and hydroxymethylfurfural in apple juices and concentrates

Summary A rapid and sensitive method for determining 2-furaldehyde (FUR) and 5-hydroxymethyl-2-furaldehyde (HMF) in apple juices and juice concentrates has been developed. The method for FUR and HMF involves the solid-liquid extraction of the juice by using a C-18 cartridge prior to reversed-phase separation with detection at 280 nm. The mobile phase was acetonitrile-water (8/92, v/v) at a flow rate of 1.0 ml/min. Recoveries from apple juices and juice concentrates spiked at different levels ranged from 94.1 to 104.0 (FUR) and 94.5 to 100.5 (HMF). The quantification limit for both, FUR and HMF, was 5 ppb.     

Confirmation of patulin and 5-hydroxymethylfurfural in apple juice by gas chromatography/mass spectrometry

A gas chromatographic/mass spectrometric (GC/MS) method was developed for the confirmation of patulin and 5-hydroxymethylfurfural (HMF) extracted from apple juice. The extraction is based on the official AOAC method for liquid chromatographic analysis. Juice extracts are quickly and easily derivatized with bis(trimethylsilyl)trifluoracetamide under mild conditions, and the trimethylsilyl ethers of the analytes are stable for at least several hours. The analytes are determined by GC/MS using an electron-impact source and selected ion monitoring of characteristic ions. For both analytes, the interassay differences between base-peak ratios for samples and standards were all <7.1% (absolute). The presence of patulin was confirmed at fortification levels of about 30-400 microg/L and naturally occurring levels of about 80-400 microg/L. The presence of HMF was also confirmed at levels < or = 2 mg/L. The proposed mass spectral fragmentation pathways of the analytes are presented.     

Liquid chromatographic method for determination of patulin in clear and cloudy apple juices and apple puree: collaborative study

A collaborative trial was conducted to validate the effectiveness of a liquid chromatographic (LC) procedure for determination of patulin in both clear and cloudy apple juices and apple puree. The test portion of clear apple juice was directly extracted with ethyl acetate; cloudy apple juice and apple puree were treated with pectinase enzyme before extraction. After back-extraction into sodium carbonate to remove interfering acidic compounds, the extract was dried and concentrated, and patulin was determined by LC with UV detection. Clear and cloudy apple juices, apple puree test samples naturally contaminated with patulin, and blank test samples for spiking with patulin were sent to 14 collaborators in 12 different European countries. Test portions of each of the 3 test sample types were spiked with patulin at 75 ng/g. Recoveries of patulin ranged from 80 to 92%. Based on the results for spiked test samples (blind pairs) and naturally contaminated test samples (blind pairs at 3 levels), the relative standard deviations for repeatability (RSDr) and reproducibility (RSDR) ranged from 8 to 35% and 11 to 36%, respectively. Although HORRAT values of <1.4 were obtained for all 3 matrixes at patulin levels ranging from 26 to 121 ng/g, better performance values (RSDr values 6-10% and RSDR values 11-25%) were obtained for clear and cloudy apple juice spiked above 50 ng/g, which is either the statutory limit or the advisory level for patulin contamination in apple juices in many countries.     

Solid-phase extraction method for patulin in apple juice and unfiltered apple juice.

Patulin, a mold metabolite, is commonly found in rotting apples. Some countries regulate patulin at levels ranging from 30 to 50 micrograms/L. Most analytical methods for patulin in apple juice include liquid-liquid partitions. A solid-phase extraction method has been developed for apple juice and unfiltered apple juice in the United States. A portion of the test sample (5 mL) was passed through a macroporous copolymer cartridge and was washed with 1 mL 1% sodium bicarbonate and then with 1 mL 1% acetic acid. Patulin was eluted with 3 mL 2% acetonitrile in anhydrous ethyl ether and was determined by reversed-phase liquid chromatography with UV detection at 276 nm. Recoveries ranged from 93 to 104% in test samples spiked at 20-100 micrograms/L.     

Determination of patulin by capillary gas chromatography of the heptafluorobutyrate derivative

Formation and capillary gas chromatography of patulin heptafluorobutyrate is reported for the first time. The derivative was identified by gas chromatography-mass spectrometry (M+ = 350). Electron-capture detector response for patulin heptafluorobutyrate was linear in the range 0.05 to 0.5 ng. This sensitive and reproducible derivatization technique was applied to the determination of patulin in apple juice by capillary gas chromatography-electron-capture detection. The overall method recovery averaged 84% and less than or equal to 10 micrograms/l could be detected.     

Determination of patulin in fruit juice and dried fruit samples by in-tube solid-phase microextraction coupled with liquid chromatography–mass spectrometry

A simple and sensitive method for the determination of patulin in fruit juice and dried fruit samples was developed using a fully automated method consisting of in-tube solid-phase microextraction (SPME) coupled with liquid chromatography–mass spectrometry (LC–MS). Patulin was separated within 5 min by high-performance liquid chromatography using a Synergi MAX-RP 80A column and water/acetonitrile (80/20, v/v) as the mobile phase. Electrospray ionization conditions in the negative ion mode were optimized for MS detection of patulin. The pseudo-molecular ion [M−H]⁻ was used to detect patulin in selected ion monitoring (SIM) mode. The optimum in-tube SPME conditions were 25 draw/eject cycles of 40 μL of sample using a Carboxen 1006 PLOT capillary column as an extraction device. The extracted patulin was readily desorbed from the capillary by passage of the mobile phase, and no carry-over was observed. Using the in-tube SPME LC–MS with SIM method, good linearity of the calibration curve (r = 0.9996) was obtained in the concentration range of 0.5–20 ng/mL using ¹³C₃-patulin as an internal standard, and the detection limit (S/N = 3) of patulin was 23.5 pg/mL. The in-tube SPME method showed >83-fold higher sensitivity than the direct injection method (10 μL injection volume). The within-day and between-day precision (relative standard deviations) were below 0.8% and 5.0% (n = 6), respectively. This method was applied successfully for the analysis of fruit juice and dried fruit samples without interference peaks. The recoveries of patulin spiked into apple juice were >92%, and the relative standard deviations were <4.5%. Patulin was detected at ng/mL levels in various commercial apple juice samples.     

Dispersive Liquid‐Liquid Microextraction Followed by HPLC‐DAD as an Efficient and Sensitive Technique for the Determination of Patulin from Apple Juice and Concentrate Samples

A simple and sensitive method based on dispersive liquid‐liquid microextraction (DLLME) in conjunction with high performance liquid chromatography‐diode array detection (HPLC‐DAD) has been developed for the quantitative analysis of patulin in apple juice and concentrate samples. The effect of extraction and disperser solvent (nature and volume), pH of sample solution, extraction time and extraction temperature was investigated. Under the optimal conditions the linear dynamic range of patulin was from 8.0 to 40.0 μg L^‐1 with a correlation coefficient of 0.9993 and a detection limit of 4.0 μg L^‐1. The relative standard deviation (RSD) was less than 5.9% (n = 5) and the recovery values were in the range of 94‐97%. Finally the proposed method was successfully applied for the analysis of patulin in apple juice and concentrate samples.     

A new solid-phase extraction and HPLC method for determination of patulin in apple products and hawthorn juice in China

A new solid‐phase extraction (SPE) pretreatment method using a home‐made polyvinylpolypyrrolidone‐florisil (PVPP‐F) column was developed for the analysis of patulin in apple and hawthorn products in China. Fifty samples (25 apple juices, 12 apple jams, and 13 hawthorn juices) were prepared using the new method and then analyzed by high performance liquid chromatography with diode array detection (HPLC‐DAD) on an Agela Venusil MP C₁₈ reversed‐phase column (4.6 mm × 250 mm, 5 μm). The cleanup results for all samples using home‐made PVPP‐F column were compared with those obtained using a MycoSep®228 AflaPat column. The correlation coefficient R (0.9998) fulfilled the requirement of linearity for patulin in the concentration range of 2.5–250 μg/kg. The limits of detection (LODs) and quantification (LOQs) of patulin were 3.99 and 9.64 μg/kg for PVPP‐F column, and 3.56 and 8.07 μg/kg for MycoSep®228 AflaPat column, respectively. Samples were spiked with patulin at levels ranging from 25 to 250 μg/kg, and recoveries using PVPP‐F and MycoSep®228 AflaPat columns were in the range of 81.9–100.9% and 86.4–103.9%, respectively. Naturally occurring patulin was found in 2 of 25 apple juice samples (8.0%) and 1 of 13 hawthorn juice samples (7.7%) at concentrations ranging from 12.26 to 36.81 μg/kg. The positive results were further confirmed by liquid chromatography electrospray ionization mass spectrometry (LC‐ESI‐MS).     

Rapid reversed-phase liquid chromatographic determination of patulin in apple juice

A rapid, simple and economical method using a limited amount of organic solvent is described for the determination of patulin in apple juice. The sample was extracted with ethyl acetate and the extract was cleaned up by extraction with sodium carbonate solution. Patulin was then determined by reversed-phase liquid chromatography using a MicroPak C₁₈ column and a variable-wavelength UV-Vis detector set at 276 nm. Patulin and 5-hydroxymethylfurfural were completely resolved by using water- acetonitrile (99:1, v/v) as the mobile phase at a flow-rate of 1.0 ml/min. The detection limit was <5 μg/1 and the recovery was 98%.     

Liquid chromatography/mass spectrometric determination of patulin in apple juice using atmospheric pressure photoionization

This paper describes a comparison between atmospheric pressure chemical ionization (APCI) and the recently introduced atmospheric pressure photoionization (APPI) technique for the liquid chromatography/mass spectrometric (LC/MS) determination of patulin in clear apple juice. A column switching technique for on-line extraction of clear apple juice was developed. The parameters investigated for the optimization of APPI were the ion source parameters fragmentor voltage, capillary voltage, and vaporizer temperature, and also mobile phase composition and flow rate. Furthermore, chemical noise and signal suppression of analyte signals due to sample matrix interference were investigated for both APCI and APPI. The results indicated that APPI provides lower chemical noise and signal suppression in comparison with APCI. The linear range for patulin in apple juice (correlation coefficient >0.999) was 0.2-100 ng mL(-1). Mean recoveries of patulin in three apple juices ranged from 94.5 to 103.2%, and the limit of detection (S/N = 3), repeatability and reproducibility were 1.03-1.50 ng mL(-1), 3.9-5.1% and 7.3-8.2%, respectively. The total analysis time was 10.0 min.     

Liquid chromatographic method for quantitation of patulin at 10 ng/mL in apple-based products intended for infants: interlaboratory study

An interlaboratory trial for the determination of patulin in apple juice and fruit puree was conducted, involving 17 participants representing a cross section of industry, official food control, and research facilities. Mean recoveries reported ranged from 74 (10 ng/g) to 62% (25 ng/g) for apple juice and from 72 (25 ng/g) to 74% (10 ng/g) for fruit puree. Based on results for spiked samples (blind pairs at 2 levels), as well as naturally contaminated samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) in juice ranged from 8.0 to 14.3% and in puree from 3.5 to 9.3%. The relative standard deviation for reproducibility (RSD(R)) in juice ranged from 19.8 to 39.5% and in puree from 12.5 to 35.2%, reflecting HORRAT values from 0.6 to 1.0 for juice and 0.4 to 0.9 for puree. The method showed acceptable within-laboratory and between-laboratory precision for each matrix, as required by current European legislation.     

Preparation and characterization of a molecularly imprinted polymer by grafting on silica supports: a selective sorbent for patulin toxin

A new molecularly imprinted polymer (MIP) has been prepared on silica beads using the radical “grafting from” polymerization method for selective extraction of minor contaminant mycotoxin of patulin (PTL). After the introduction of amino groups onto the silica surface with 3-aminopropyltriethoxysilane, azo initiator onto the silica surface was achieved by the reaction of surface amino groups with 4,4′-azobis(4-cyanopentanoic acid). The scale-up synthesis of MIP was then carried out in the presence of 6-hydroxynicotinic acid as template substitute, functional, and cross-linking monomers. The prepared sorbent was characterized using FT-IR spectroscopy, scanning electron microscopy, elemental analysis, and the adsorption–desorption selectivity, and the capacity characteristic of the polymer was investigated by a conventional batch adsorption test and Scatchard plot analysis. The results indicated that coated polymers had specific adsorption to PTL as compared with its co-occurring 5-hydroxymethyl-2-furaldehyde (hydroxymethylfurfural (HMF)), at the same bulk concentration for solution of PTL and HMF, the maximum absorbance in the solid-phase extraction (SPE) method to PTL were 93.97% or 0.654 μg/mg while to HMF they were 76.89% or 0.496 μg/mg. Scatchard analysis revealed that two classes of binding sites were formed in PTL-MIP with dissociation constants of 3.2 × 10⁻² and 5.0 × 10⁻³ mg/mL and the affinity binding sites of 8.029 and 1.364 mg/g, respectively. The recoveries of PTL were more than 90% for the developed MISPE and around 75% for the traditional liquid–liquid extraction in spiked apple juice samples. It was concluded that the method is suitable for the scale-up synthesis of PTL-MIP grafted on silica, and the polymer can be effectively applied as SPE coupled with high-performance liquid chromatography (HPLC) for the determination of PTL in apple juice or other related products.     

Determination of patulin in apple juice by liquid chromatography

A method was developed and validated in-house for the determination of patulin (PAT), a toxic mold metabolite, in apple juice. The sample was extracted with ethyl acetate-hexane and analyzed by liquid chromatography equipped with a C18 column and diode array detector. The mobile phase used for the quantification was water-ethanol, at a flow rate of 0.5 mL/min. The method showed a mean recovery of 84.8%, the relative standard deviation obtained in the precision study was <7.7%, the quantification and detection limits were 7 and 3 microg/L, respectively, and the linear range for PAT in apple juice was 2.6-650 microg/L. The ruggedness was evaluated by an intralaboratory experiment, in which 5 factors were studied, and only one was found to influence the observed results. The developed method is fast, practical, and simple; the solvents (except hexane) and reagents used were nontoxic. The results of the validation confirmed the efficiency of the method, which is sensitive enough to be used in studies required to quantify PAT in apple juice.     

Syringe-cartridge solid-phase extraction method for patulin in apple juice

A syringe-cartridge solid-phase extraction (SPE) method was developed for determination of patulin in apple juice. A 2.5 mL portion of test sample was passed through a conditioned macroporous SPE cartridge and washed with 2 mL 1% sodium bicarbonate followed by 2 mL 1% acetic acid. Patulin was eluted with 1 mL 10% ethyl acetate in ethyl ether and determined by reversed-phase liquid chromatography using a mobile phase consisting of 81% acetonitrile, 9% water, and 10% 0.05M potassium phosphate buffer, pH 2.4. Recoveries averaged 92% and the relative standard deviation was 8.0% in test samples spiked with 50 ng/mL patulin. The method appears to be applicable for monitoring apple juice samples to meet the U.S. Food and Drug Administration compliance action level of 50 microg/kg in an industrial quality assurance laboratory environment.     

Selective solid‐phase extraction using a molecularly imprinted polymer for the analysis of patulin in apple‐based foods

The aim of this work was to evaluate the use of a molecularly imprinted polymer as a selective solid‐phase extraction sorbent for the clean‐up and pre‐concentration of patulin from apple‐based food products. Ultra high pressure liquid chromatography coupled to ultraviolet absorbance detection was used for the analysis of patulin. The molecularly imprinted polymer was applied, for the first time, to the determination of patulin in apple juice, puree and jam samples spiked within the maximum levels specified by the European Commission No. 1881/2006. High recoveries (>77%) were obtained. The method was validated and found to be linear in the range 2–100 μg/kg with correlation coefficients greater than 0.965 and repeatability relative standard deviation below 11% in all cases. Compared with dispersive solid‐phase extraction (QuEChERS method) and octadecyl sorbent, the molecularly imprinted polymer showed higher recoveries and selectivity for patulin. The application of Affinisep molecularly imprinted polymer as a selective sorbent material for detection of patulin fulfilled the method performance criteria required by the Commission Regulation No. 401/2006, demonstrating the suitability of the technique for the control of patulin at low ppb levels in different apple‐based foods such as juice, puree and jam samples.     

Synthesis and evaluation of cyclodextrin-based polymers for patulin extraction from aqueous solutions

Patulin is a mycotoxin produced by fungi that contaminate fruits, juices, and other agricultural commodities. Sorption properties of polyurethane-beta-cyclodextrin polymers were evaluated for the ability to remove patulin from solutions, including apple juice. Freundlich isotherm analysis determined the polymers possess a degree of heterogeneity. Evaluation of the polymers by solid phase extraction analysis indicated patulin sorption is enhanced in aqueous environments. Polymers crosslinked with tolylene 2,4-diisocyanate were suitable for extraction of patulin from apple juice. Quantum chemical studies of the interactions of patulin and beta-cylcodextrin using the PM3 semi-empirical method infer patulin is capable of binding to the polymer in multiple modes. Certain of these bound complexes possess intermolecular hydrogen bond interactions between the primary hydroxyls of beta-cyclodextrin and patulin. These nanoporous cyclodextrin polymers exhibit favorable properties to assist the detection of patulin in aqueous solutions.     

Capillary gas chromatography/mass spectrometry with chemical ionization and negative ion detection for confirmation of identity of patulin in apple juice

Gas chromatography/mass spectrometry (GC/MS) with negative ion chemical ionization permits detection of underivatized patulin in apple juice extracts while minimizing co-extractive responses. The technique has been used with a variety of capillary columns in quadrupole, ion trap, and magnetic sector GC/MS instruments to confirm presumptive findings of patulin in apple juice at concentrations ranging from 68 to 3700 micrograms/L. The demonstrated ability to use any of these 3 mass spectrometers and several capillary columns to confirm the identity of patulin are significant strengths of the technique.     

Determination of patulin in apple juice by high-performance liquid chromatography-atmospheric pressure chemical ionization mass spectrometry

An HPLC-MS-MS method with selected reaction monitoring (SRM) for the determination of patulin in apple juice samples is described. Mass spectrometric detection was accomplished following atmospheric pressure chemical ionization (APCI) in both positive and negative ion modes. Collision induced dissociation (CID) of the protonated molecular ion led initially to the loss of H2O (fragment m/z 137). At higher energies CO is lost from both the protonated parent molecule (fragment m/z 127) and the dehydrated molecular ion (fragment m/z 109). In contrast, CID of the deprotonated molecular ion led initially to the fragment at m/z 109 corresponding to the loss of either CO2 or acetaldehyde, followed at higher CID energy by the loss of H2O (fragment m/z 135) and CO (fragment m/z 125) from the deprotonated molecular ion. Detection in the negative ion mode proved superior and a linear response was observed over the injected range from 6 to 200 ng patulin. Apple juice samples spiked with patulin between 10 and 135 microg/l were analyzed following liquid-liquid extraction with ethyl acetate and clean up with sodium carbonate. Utilizing reversed-phase HPLC with acetonitrile-water (10:90) at 0.5 ml/min, levels down to 10 microg/l were readily quantified and a detection limit of 4 microg/l was attainable at a signal-to-noise (SIN) ratio of 4. The MS data for the spiked samples compared well to the UV data and when plotted against each other displayed a correlation coefficient (R) of 0.99.     

Effects of organic acids,amino acids and ethanol on the radio-degradation of patulin in an aqueous model system

The effects of organic acids, amino acids, and ethanol on the radio-degradation of patulin by gamma irradiation in an aqueous model system were investigated. The patulin, dissolved in distilled water at a concentration of 50 ppm, was practically degraded by the gamma irradiation at the dose of 1.0 kGy, while 33% of the patulin remained in apple juice. In the aqueous model system, the radio-degradation of patulin was partially inhibited by the addition of organic acids, amino acids, and ethanol. The proportions of remaining patulin after irradiation with the dose of 1.0 kGy in the 1% solution of malic acid, citric acid, lactic acid, acetic acid, ascorbic acid, and ethanol were 31.4%, 2.3%, 31.2%, 6.1%, 50.8%, and 12.5%, respectively. During 30 days of storage, the remaining patulin was reduced gradually in the solution of ascorbic acid and malic acid compared to being stable in other samples. The amino acids, serine, threonine, and histidine, inhibited the radio-degradation of patulin. In conclusion, it was suggested that 1 kGy of gamma irradiation (recommended radiation doses for radicidation and/or quarantine in fruits) is effective for the reduction of patulin, but the nutritional elements should be considered because the radio-degradation effects are environment dependent.     

Rapid gas chromatography/mass spectrometry determination and confirmation of patulin in apple juice

A gas chromatography/mass spectrometry (GC/MS) method was developed for the quantitative determination and confirmation of patulin extracted from apple juice. Juice is alkalized and extracted with ethyl acetate-hexane, a portion concentrated under N2, then resolubilized in acetonitrile for simple derivatization with bis(trimethylsilyl)trifluoracetamide. Patulin was determined by GC/MS using an electron-impact source and selected ion monitoring of characteristic ions. Spike levels of 20-100 microg/L gave an average recovery of 86%, and 6 ions of sample and standard spectra matched within 10% absolute for confirmation. The limits of quantitation and detection were 10 and 3 microg/L, respectively.