Cellulases and Xylanases Production by <Emphasis Type="Italic">Penicillium echinulatum</Emphasis> Grown on Sugar Cane Bagasse in Solid-State Fermentation

To investigate the production of cellulases and xylanases from Penicillium echinulatum 9A02S1, solid-state fermentation (SSF) was performed by using different ratios of sugar cane bagasse (SCB) and wheat bran (WB). The greatest filter paper activity obtained was 45.82 ± 1.88 U gdm⁻¹ in a culture containing 6SCB/4WB on the third day. The greatest β-glucosidase activities were 40.13 ± 5.10 U gdm⁻¹ obtained on the third day for the 0SCB/10WB culture and 29.17 ± 1.06 U gdm⁻¹ for the 2SCB/8WB culture. For endoglucanase, the greatest activities were 290.47 ± 43.57 and 276.84 ± 15.47 U gdm⁻¹, for the culture 6SCB/4WB on the fourth and fifth days of cultivation, respectively. The greatest xylanase activities were found on the third day for the cultures 6SCB/4WB (36.38 ± 5.38 U gdm⁻¹) and 4SCB/6WB (37.87 ± 2.26 U gdm⁻¹). In conclusion, the results presented in this article showed that it was possible to obtain large amounts of cellulases and xylanases enzymes using low-cost substrates, such as SCB and WB.     

Gene Cloning,Overexpression, and Characterization of a Xylanase from <Emphasis Type="Italic">Penicillium</Emphasis> sp. CGMCC 1669

A xylanase-encoding gene, xyn11F63, was isolated from Penicillium sp. F63 CGMCC1669 using degenerated polymerase chain reaction (PCR) and thermal asymmetric interlaced (TAIL)-PCR techniques. The full-length chromosomal gene consists of 724 bp, including a 73-bp intron, and encodes a 217 amino acid polypeptide. The deduced amino acid sequence of xyn11F63 shows the highest identity of 70% to the xylanase from Penicillium sp. strain 40, which belongs to glycosyl hydrolases family 11. The gene was overexpressed in Pichia pastoris, and its activity in the culture medium reached 516 U ml⁻¹. After purification to electrophoretic homogeneity, the enzyme showed maximal activity at pH 4.5 and 40°C, was stable at acidic buffers of pH 4.5–9.0, and was resistant to proteases (proteinase K, trypsin, subtilisin A, and α-chymotrypsin). The specific activity, K _m, and V _max for oat spelt xylan substrate was 7,988 U mg⁻¹, 22.2 mg ml⁻¹, and 15,105.7 μmol min⁻¹ mg⁻¹, respectively. These properties make XYN11F63 a potential economical candidate for use in feed and food industrial applications.     

Cloning of a Heat-Stable Chitin Deacetylase Gene from <Emphasis Type="Italic">Aspergillus nidulans</Emphasis> and its Functional Expression in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A gene encoding chitin deacetylase was cloned by polymerase chain reaction from Aspergillus nidulans. Sequencing result showed 40% homology to the corresponding gene from Colletotrichum lindemuthianum. The complete gene contains an open reading frame of 747 nucleotides encoding a sequence of 249 amino acid residues. The chitin deacetylase gene was subcloned into a pET28a expression vector and expressed in Escherichia coli BL21 and then purified by metal affinity chromatography using a His-bind column. The purified chitin deacetylase demonstrated an activity of 0.77 U ml⁻¹ for the glycol chitin substrates, and its specific activity was 4.17 U mg⁻¹ for it. The optimal temperature and pH of the purified enzyme were 50 °C and 8.0, respectively. When glycol chitin was used as the substrate, K _m was 4.92 mg ml⁻¹, and K _cat showed 6.25 s⁻¹, thus the ratio of K _cat and K _m was 1.27 ml s⁻¹ mg⁻¹. The activity of chitin deacetylase was affected by a range of metal ions and ethylenediaminetetraacetic acid.     

Characterization of a Thermostable Family 1 Glycosyl Hydrolase Enzyme from <Emphasis Type="Italic">Putranjiva roxburghii</Emphasis> Seeds

A 66-kDa thermostable family 1 Glycosyl Hydrolase (GH1) enzyme with β-glucosidase and β-galactosidase activities was purified to homogeneity from the seeds of Putranjiva roxburghii belonging to Euphorbiaceae family. N-terminal and partial internal amino acid sequences showed significant resemblance to plant GH1 enzymes. Kinetic studies showed that enzyme hydrolyzed p-nitrophenyl β-d-glucopyranoside (pNP-Glc) with higher efficiency (K _cat/K _m = 2.27 × 10⁴ M⁻¹ s⁻¹) as compared to p-nitrophenyl β-d-galactopyranoside (pNP-Gal; K _cat/K _m = 1.15 × 10⁴ M⁻¹ s⁻¹). The optimum pH for β-galactosidase activity was 4.8 and 4.4 in citrate phosphate and acetate buffers respectively, while for β-glucosidase it was 4.6 in both buffers. The activation energy was found to be 10.6 kcal/mol in the temperature range 30–65 °C. The enzyme showed maximum activity at 65 °C with half life of ~40 min and first-order rate constant of 0.0172 min⁻¹. Far-UV CD spectra of enzyme exhibited α, β pattern at room temperature at pH 8.0. This thermostable enzyme with dual specificity and higher catalytic efficiency can be utilized for different commercial applications.     

High Level Expression of an Acid-Stable Phytase from <Emphasis Type="Italic">Citrobacter freundii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

To obtain a high level expression of phytase with favorable characteristics, a codon-optimized phytase gene from Citrobacter freundii was synthesized and transferred into Pichia pastoris. Small-scale expression experiments and activity assays were used to screen positive colonies. After purified by Ni²⁺–NTA agarose affinity column, the characterizations of the recombinant phytase were determined. The recombinant phytase (r-phyC) had two distinct pH optima at 2.5 and 4.5 and an optimal temperature at 50 °C. It retained more than 80% activity after being incubated under various buffer (pH 1.5–8.0) at 37 °C for 1 h. The specific activity, Km, and Vmax values of r-phyC for sodium phytate were 2,072 ± 18 U mg⁻¹, 0.52 ± 0.04 mM, and 2,380 ± 84 U mg⁻¹ min⁻¹, respectively. The enzyme activity was significantly improved by 1 mM of K⁺, Ca²⁺, and Mg²⁺. These characteristics contribute to its potential application in feed industry.     

Banana Peel: A Potential Substrate for Laccase Production by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> VkJ2.4.5 in Solid-State Fermentation

In solid-state fermentation, among various solid supports evaluated, banana peel was found to be an ideal support and resulted into higher levels of laccase (6281.4 ± 63.60 U l⁻¹) along with notable levels of manganese peroxidase production (1339.0 ± 131.23 U l⁻¹) by Aspergillus fumigatus VkJ2.4.5. Maximum levels of laccase was achieved under derived conditions consisting of 80% of moisture level, 6 days of incubation period, 6% inoculum level, and an aeration level of 2.5 l min⁻¹. A column-tray bioreactor was designed to scale up and economize the enzyme production in three successive cycles of fermentation using the same fungal biomass. Thermal and pH stability profiles revealed that enzyme was stable up to 50°C and at varying pH range from 5–9 for up to 2 h. The apparent molecular weight of laccase was found to be 34 ± 1 kDa. MALDI-TOF/TOF analysis of the protein showed significant homology with maximum identity of 67% to other laccases reported in database.     

Co-cultured production of lignin-modifying enzymes with white-rot fungi

Co-cultivation was a potential strategy in lignocellulolytic biodegradation with producing high activity enzymes due to their synergistic action. The objective of this study was to investigate the rarely understood effects of co-culturing of two white-rot fungi on lignin-modifying enzymes (LMEs) production. Six species, Bjerkandera adusta, Phlebia radiata, Pleurotus ostreatus, Dichomitus squalens, Hypoxylon fragiforme and Pleurotus eryngii, were cultured in pairs to study the production of LMEs. The paired hyphal interaction observed showed that P. eryngii is not suitable for co-growth. The use of agar plates containing dye RBBR showed elevated decolourisation at the confrontation zone between mycelia. Laccase was significantly stimulated only in the co-culture of P. radiata with D. squalens under submerged cultivation; the highest value was measured after 4 days of incubation (120 U mg⁻¹). The improved productions of MnP and LiP were simultaneously observed at the co-culture of P. ostreatus and P. radiata (MnP = 800 nkat L⁻¹ after 4 days of incubation; LiP = 60 nkat L⁻¹ after 7 days of incubation), though it was not a good producer of laccase. P. ostreatus appeared to possess specific potential to be used in co-cultured production of LMEs. The phenotype of LMEs production was not only dependent on the species used but also regulated by different nutritions available in the culture medium. The present data will provide evidence for illustrating the regulatory roles of C/N on LMEs production under the co-cultures’ circumstances.     

Simultaneous measurement of endogenous cortisol,cortisone, dehydroepiandrosterone,and dehydroepiandrosterone sulfate in nails by use of UPLC–MS–MS

Steroid hormone concentrations are mostly determined by using different body fluids as matrices and applying immunoassay techniques. However, usability of these approaches may be restricted for several reasons, including ethical barriers to invasive sampling. Therefore, we developed an ultra-performance LC–MS–MS method for high-throughput determination of concentrations of cortisol, cortisone, dehydroepiandrosterone (DHEA), and DHEA sulfate (DHEAS) in small quantities of human nails. The method was validated for linearity, limits of detection and quantification, recovery, intra and interassay precision, accuracy, and matrix effect. Samples from 10 adult women were analyzed to provide proof-of-principle for the method’s applicability. Calibration curves were linear (r ² > 0.999) in the ranges 10–5000 pg mg⁻¹ for cortisol, cortisone, and DHEAS, and 50–5000 pg mg⁻¹ for DHEA. Limits of quantification were 10 pg mg⁻¹ for cortisol, cortisone, and DHEAS, and 50 pg mg⁻¹ for DHEA. The sensitivity and specificity of the method were good, and there was no interference with the analytes. Mean recovery of cortisol, cortisone, DHEA, and DHEAS was 90.5%, 94.1%, 84.9%, and 95.9%, respectively, with good precision (coefficient of variation <14% for all analytes) and accuracy (relative error (%) −8.3% to 12.2% for all analytes). The median (pg mg⁻¹, range) hormone concentrations were 69.5 (36–158), 65 (32–133), 212 (50–1077), and 246 (115–547) for cortisol, cortisone, DHEA, and DHEAS, respectively. This method enables measurement of cortisol, cortisone, DHEA, and DHEAS in small quantities of human nails, leading to the development of applications in endocrinology and beyond.     

Keratinase Production by Endophytic <Emphasis Type="Italic">Penicillium</Emphasis> spp. Morsy1 Under Solid-State Fermentation Using Rice Straw

Among all endophytic keratinolytic fungal isolates recovered from marine soft coral Dendronephthya hemprichii, Penicillium spp. Morsy1 was selected as the hyperactive keratinolytic strain under solid substrate fermentation of different agriculture and poultry wastes. The optimization of extraction process, physicochemical parameters affecting the keratinase production in solid-state fermentation, and the purified keratinase parameters were studied. Maximum keratinase activity (1,600 U g⁻¹, initial dry substrate) was recovered from moldy bran with 0.1% Tween 80. The optimized production conditions were rice straw as carbon source, pH of medium 6, growth temperature 26 °C, initial moisture content of 80% (v/w), inoculum size of 10⁵ spores ml⁻¹, and an average particle size of the substrate 0.6 mm (3,560 U g⁻¹, initial dry substrate after 5 days of fermentation). Two types of keratinase (Ahm1 and Ahm2) were purified from the culture supernatant through ammonium sulfate precipitation, DEAE-Sepharose, and gel filtration chromatography. Enzyme molecular weights were 19 kDa (Ahm1) and 40 kDa (Ahm2). The kinetic parameters of purified keratinases were optimized for the hydrolysis of azokeratin by Ahm1 (pH 7.0–8.0, stable in pH range of 6.0 to 8.0 at 50 °C) and Ahm2 enzymes (pH 10.0–11.0, stable in pH range of 6.0 to 11.0 at 60–65 °C). Whereas inhibitors of serine (phenylmethylsulfonyl fluoride) and cysteine (iodoacetamide) proteases had minor effects on both Ahm1 and Ahm2 activity, both keratinases were strongly inhibited by chelating agents EDTA and EGTA. These findings suggest that serine and cysteine residues are not involved in the catalytic mechanisms, and they are metalloproteases.     

Catalytic and Thermodynamic Characterization of Endoglucanase (CMCase) from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cmc-1

Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg⁻¹ protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol⁻¹ at optimum temperature (55 °C), and its temperature quotient (Q ₁₀) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V _max for CMC hydrolysis was 854 U mg⁻¹ protein and K _m was 20 mg CMC ml⁻¹. The turnover (k _cat) was 356 s⁻¹. The pK _a1 and pK _a2 of ionisable groups of active site controlling V _max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol⁻¹, ΔG* = 64.57 kJ mol⁻¹ and ΔS* = −195.05 J mol⁻¹ K⁻¹, respectively. Activation energy for irreversible inactivation ‘E _a(d)’ of the endoglucanase was 378 kJ mol⁻¹, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol⁻¹, 111.36 kJ mol⁻¹ and 833.06 J mol⁻¹ K⁻¹, respectively.     

Production of Thermophilic Endo-β-1,4-xylanases by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> FBSPE-05 Using Agro-industrial By-products

In the present paper, endo-β-1,4-xylanase production by Aspergillus fumigatus was evaluated in solid-state fermentation using low-cost substrates such as sugarcane bagasse (SCB), brewer’s spent grain (BSG), and wheat bran (WB). The partial characterization of the crude enzyme was also performed. In the experimental conditions, the highest levels of endo-β-1,4-xylanase production by A. fumigatus FBSPE-05 occurred within 8 days incubation when using SCB/liquid medium at 1:2 ratio (219.5 U g⁻¹) and 4 days incubation when using WB/liquid medium at 1:1 ratio (215.6 U g⁻¹). Crude enzyme from this last condition was used to enzyme characterization, showing best enzyme activity at 60 °C and pH 6.0, which suggests a thermophilic endoxylanase. The crude enzyme retained 73% of its activity after 1 h at 60 °C, and zymogram has shown three bands of endo-β-1,4-xylanase activity, with different molecular masses. A. fumigatus FBSPE-05 was able to grow and produce good levels of endo-β-1,4-xylanase using agro-industrial by-products, making this strain worthy for further investigation. To our knowledge, this is the first study reporting the use of SCB and/or BSG as sole substrates for endoxylanase production by solid-state fermentation using A. fumigatus.     

A Novel endo-1,4-β-Mannanase from <Emphasis Type="Italic">Bispora antennata</Emphasis> with Good Adaptation and Stability over a Broad pH Range

An endo-β-1,4-mannanase encoding gene, man5, was cloned from Bispora antennata CBS 126.38, which was isolated from a beech stump. The cDNA of man5 consists of 1,299 base pairs and encodes a 432-amino-acid protein with a theoretical molecular mass of 46.6 kDa. Deduced MAN5 exhibited the highest amino acid sequence identity of 58% to a β-mannanase of glycoside hydrolase family 5 from Aspergillus aculeatus. Recombinant MAN5 was expressed in Pichia pastoris and purified to electrophoretic homogeneity. The specific activity of the final preparation towards locust bean gum was 289 U mg⁻¹. MAN5 showed optimal activity at pH 6.0 and 70 °C and had good adaptation and stability over a broad range of pH values. The enzyme showed more than 60% of peak activity at pH 3.0–8.0 and retained more than 80% of activity after incubation at 37 °C for 1 h in both acid and alkaline conditions (pH 4.0–11.0). The K _m and V _max values were 1.33 mg ml⁻¹ and 444 μmol min⁻¹ mg⁻¹ and 1.17 mg ml⁻¹ and 196 μmol min⁻¹ mg⁻¹ for locust bean gum and konjac flour, respectively. Of all tested metal ions and chemical reagents, Co²⁺, Ni²⁺, and β-mercaptoethanol enhanced the enzyme activity at 1 mM, whereas other chemicals had no effect on or partially inhibited the enzyme activity. MAN5 was highly resistant to acidic and neutral proteases (trypsin, α-chymotrypsin, collagenase, subtilisin A, and proteinase K). By virtue of the favorable properties of MAN5, it is possible to apply this enzyme in the paper and food industries.     

Screening of Pectinase-Producing Microorganisms with Polygalacturonase Activity

The aim of this work was to perform the screening of microorganisms, previously isolated from samples of agro-industrial waste and belonging to the culture collection of our laboratory, able to produce polygalacturonases (PG). A total of 107 microorganisms, 92 newly isolated and 15 pre-identified, were selected as potential producers of enzymes with PG activity. From these microorganisms, 20 strains were able to synthesize PG with activities above 3 U mL⁻¹. After the kinetic study, the enzyme activity was increased up to 13 times and the microorganism identified as Aspergillus niger ATCC 9642 and the newly isolated W23, W43, and D2 (Penicillium sp.) after 24 h of fermentation led to PG activities of 30, 41, 43, and 45 U mL⁻¹, respectively. The RAPD analysis demonstrated that the selected strains differs genetically, indicating that no duplication of strains among them in the experiments for polygalacturonases production was verified.     

Cloning of a New Xylanase Gene from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. TN119 Using a Modified Thermal Asymmetric Interlaced-PCR Specific for GC-Rich Genes and Biochemical Characterization

A bacterial strain, Streptomyces sp. TN119, was isolated from the gut of Batocera horsfieldi larvae and showed xylanolytic activity. A degenerate primer set was designed based on the base usage of G and C in Actinobacteria xylanase-coding sequences belonging to the glycosyl hydrolases family 10 (GH 10), and used to clone the partial xylanase gene from Streptomyces sp. TN119. A modified thermal asymmetric interlaced (TAIL)-PCR specific for high-GC genes, named GC TAIL-PCR, was developed to obtain the full-length xylanase gene (xynA119; 1089 bp). Rich in GC content (67.8%), xynA119 encodes a new GH 10 xylanase (XynA119), which shares highest identity (48.8%) with an endo-1,4-β-xylanase from Cellulosimicrobium sp. HY-12. Recombinant XynA119 was expressed in Escherichia coli BL21 (DE3) and purified to electrophoretic homogeneity. The enzyme showed maximal activity at pH 6.5 and 60 °C, was stable at pH 4.0 to 10.0 and 50 °C, was resistant to most chemicals (except for Cu²⁺, Mn²⁺, Ag⁺, Hg²⁺ and SDS) and trypsin, and produced simple products. The specific activity, K _m, V _max, and k _cat using oat-spelt xylan as substrate were 57.9 U mg⁻¹, 1.0 mg ml⁻¹, 74.8 μmol min⁻¹ mg⁻¹, and 49.2 s^–1, respectively.     

Cloning,Expression, and Characterization of a Wide-pH-Range Stable Phosphite Dehydrogenase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. K in <Emphasis Type="Italic">Escherichia coli</Emphasis>

A phosphite dehydrogenase gene (ptdhK) consisting of 1,011-bp nucleotides which encoding a peptide of 336 amino acid residues was cloned from Pseudomonas sp. K. gene ptdhK was expressed in Escherichia coli BL21 (DE3) and the corresponding recombinant enzyme was purified by metal affinity chromatography. The recombinant protein is a homodimer with a monomeric molecular mass of 37.2 kDa. The specific activity of PTDH-K was 3.49 U mg⁻¹ at 25 °C. The recombinant PTDH-K exhibited maximum activity at pH 3.0 and at 40 °C and displayed high stability within a wide range of pHs (5.0 to 10.5). PTDH-K had a high affinity to its natural substrates, with K _m values for sodium phosphite and NAD of 0.475 ± 0.073 and 0.022 ± 0.007 mM, respectively. The activity of PTDH-K was enhanced by Na⁺, NH₄⁺, Mg²⁺, Fe²⁺, Fe³⁺, Co²⁺, and EDTA, and PTDH-K exhibited different tolerance to various organic solvents.     

Simultaneous and sensitive determination of procaine and its metabolite for pharmaceutical quality control and pharmacokinetic research by using a graphite paste electrode

A simple, rapid, sensitive, and accurate method for simultaneous electrochemical determination of procaine and its metabolite (p-aminobenzoic acid, PABA) for pharmaceutical quality control and pharmacokinetic research was developed using a graphite paste electrode. The differential pulse voltammetric results revealed that procaine and p-aminobenzoic acid, respectively, showed well-defined anodic oxidation peaks on a carbon paste electrode with a current peak separation of 155 mV at a scan rate of 100 mV s⁻¹. This well separation of the current peaks for these two compounds in voltammetry enables us to simultaneously determine them. Good linearity (r > 0.998) between oxidation peak current and concentration was obtained in the range of 5.0 × 10⁻⁷–5.0 × 10⁻⁵ M for procaine and 5.0 × 10⁻⁷–2.0 × 10⁻⁵ M for PABA in pH 4.50 acetate buffer solution. The detection limit for both analytes is 5 × 10⁻⁸ M (S/N = 3:1). The present voltammetric method has been successfully used to determine trace p-aminobenzoic acid in procaine hydrochloride injection and procaine in plasma with a linear relationship of current to its concentration ranging from 1.0 × 10⁻⁶ to 5.0 × 10⁻⁵ M (correlation coefficient of 0.9981) with a low detection limit of 5.0 × 10⁻⁷ M (S/N = 3:1). This validated method is promising to the study of pharmacokinetics in Sprague–Dawley rat and rabbit plasma after an intravenous administration of procaine hydrochloride injection.     

Electro-catalysis by immobilised human flavin-containing monooxygenase isoform 3 (hFMO3)

Human flavin-containing monooxygenases are the second most important class of drug-metabolizing enzymes after cytochromes P450. Here we report a simple but functional and stable enzyme-electrode system based on a glassy carbon (GC) electrode with human flavin-containing monooxygenase isoform 3 (hFMO3) entrapped in a gel cross-linked with bovine serum albumin (BSA) by glutaraldehyde. The enzymatic electrochemical responsiveness is characterised by using well-known substrates: trimethylamine (TMA), ammonia (NH₃), triethylamine (TEA), and benzydamine (BZD). The apparent Michaelis–Menten constant (K′_M) and apparent maximum current (I′_max) are calculated by fitting the current signal to the Michaelis–Menten equation for each substrate. The enzyme-electrode has good characteristics: the calculated sensitivity was 40.9 ± 0.5 mA mol⁻¹ L cm⁻² for TMA, 43.3 ± 0.1 mA mol⁻¹ L cm⁻² for NH₃, 45.2 ± 2.2 mA mol⁻¹ L cm⁻² for TEA, and 39.3 ± 0.6 mA mol⁻¹ L cm⁻² for BZD. The stability was constant for 3 days and the inter-electrode reproducibility was 12.5%. This is a novel electrochemical tool that can be used to investigate new potential drugs against the catalytic activity of hFMO3.     

Sequestering Ability of Dicarboxylic Ligands Towards Dioxouranium(VI) in NaCl and KNO<Subscript>3</Subscript> Aqueous Solutions at <Emphasis Type="Italic">T</Emphasis>=298.15 K

The formation constants of dioxouranium(VI)-2,2′-oxydiacetic acid (diglycolic acid, ODA) and 3,6,9-trioxaundecanedioic acid (diethylenetrioxydiacetic acid, TODA) complexes were determined in NaCl (0.1≤I≤1.0 mol⋅L⁻¹) and KNO₃ (I=0.1 mol⋅L⁻¹) aqueous solutions at T=298.15 K by ISE-[H⁺] glass electrode potentiometry and visible spectrophotometry. Quite different speciation models were obtained for the systems investigated, namely: ML⁰, MLOH⁻, ML₂²⁻, M₂L₂(OH)⁻, and M₂L₂(OH)₂²⁻, for the dioxouranium(VI)–ODA system, and ML⁰, MLH⁺, and MLOH⁻ for the dioxouranium(VI)–TODA system (M=UO₂²⁺ and L = ODA or TODA), respectively. The dependence on ionic strength of the protonation constants of ODA and TODA and of both metal-ligand complexes was investigated using the SIT (Specific Ion Interaction Theory) approach. Formation constants at infinite dilution are [for the generic equilibrium pUO₂²⁺+q(L²⁻)+rH⁺ ⇌(UO₂²⁺) _p (L) _q H _r ^(2p−2q+r);β _pqr ]: log ₁₀ β ₁₁₀=6.146, log ₁₀ β ₁₁₋₁=0.196, log ₁₀ β ₁₂₀=8.360, log ₁₀ β ₂₂₋₁=8.966, log ₁₀ β ₂₂₋₂=3.529, for the dioxouranium(VI)–ODA system and log β ₁₁₀=3.636, log ₁₀ β ₁₁₁=6.650, log ₁₀ β ₁₁₋₁=−1.242 for dioxouranium(VI)–TODA system. The influence of etheric oxygen(s) on the interaction towards the metal ion was discussed, and this effect was quantified by means of a sigmoid Boltzman type equation that allows definition of a quantitative parameter (pL ₅₀) that expresses the sequestering capacity of ODA and TODA towards UO₂²⁺; a comparison with other dicarboxylates was made. A visible absorption spectrum for each complex reaching a significant percentage of formation in solution (KNO₃ medium) has been calculated to better characterize the compounds found by pH-metric refinement.     

LC–MS–MS determination of ibuprofen, 2-hydroxyibuprofen enantiomers,and carboxyibuprofen stereoisomers for application in biotransformation studies employing endophytic fungi

The purpose of this study was the development and validation of an LC–MS–MS method for simultaneous analysis of ibuprofen (IBP), 2-hydroxyibuprofen (2-OH-IBP) enantiomers, and carboxyibuprofen (COOH-IBP) stereoisomers in fungi culture medium, to investigate the ability of some endophytic fungi to biotransform the chiral drug IBP into its metabolites. Resolution of IBP and the stereoisomers of its main metabolites was achieved by use of a Chiralpak AS-H column (150 × 4.6 mm, 5 μm particle size), column temperature 8 °C, and the mobile phase hexane–isopropanol–trifluoroacetic acid (95: 5: 0.1, v/v) at a flow rate of 1.2 mL min⁻¹. Post-column infusion with 10 mmol L⁻¹ ammonium acetate in methanol at a flow rate of 0.3 mL min⁻¹ was performed to enhance MS detection (positive electrospray ionization). Liquid–liquid extraction was used for sample preparation with hexane–ethyl acetate (1:1, v/v) as extraction solvent. Linearity was obtained in the range 0.1–20 μg mL⁻¹ for IBP, 0.05–7.5 μg mL⁻¹ for each 2-OH-IBP enantiomer, and 0.025–5.0 μg mL⁻¹ for each COOH-IBP stereoisomer (r ≥ 0.99). The coefficients of variation and relative errors obtained in precision and accuracy studies (within-day and between-day) were below 15%. The stability studies showed that the samples were stable (p > 0.05) during freeze and thaw cycles, short-term exposure to room temperature, storage at −20 °C, and biotransformation conditions. Among the six fungi studied, only the strains Nigrospora sphaerica (SS67) and Chaetomium globosum (VR10) biotransformed IBP enantioselectively, with greater formation of the metabolite (+)-(S)-2-OH-IBP. Formation of the COOH-IBP stereoisomers, which involves hydroxylation at C3 and further oxidation to form the carboxyl group, was not observed.     

Simple sensor for simultaneous determination of dihydroxybenzene isomers

A simple sensor based on bare carbon ionic liquid electrode was fabricated for simultaneous determination of dihydroxybenzene isomers in 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0). The oxidation peak potential of hydroquinone was about 0.136 V, catechol was about 0.240 V, and resorcinol 0.632 V by differential pulse voltammetric measurements, which indicated that the dihydroxybenzene isomers could be separated absolutely. The sensor showed wide linear behaviors in the range of 5.0 × 10⁻⁷–2.0 × 10⁻⁴ mol L⁻¹ for hydroquinone and catechol, 3.5 × 10⁻⁶–1.535 × 10⁻⁴ mol L⁻¹ for resorcinol, respectively. And the detection limits of the three dihydroxybenzene isomers were 5.0 × 10⁻⁸, 2.0 × 10⁻⁷, 5.0 × 10⁻⁷ mol L⁻¹, respectively (S/N = 3). The proposed method could be applied to the determination of dihydroxybenzene isomers in artificial wastewater and the recovery was from 93.9% to 104.6%.