Ionic liquids. Combination of combustion calorimetry with high-level quantum chemical calculations for deriving vaporization enthalpies

In this work, the molar enthalpies of formation of the ionic liquids [C2MIM][NO3] and [C4MIM][NO3] were measured by means of combustion calorimetry. The molar enthalpy of fusion of [C2MIM][NO3] was measured using differential scanning calorimetry. Ab initio calculations of the enthalpy of formation in the gaseous phase have been performed for the ionic species using the G3MP2 theory. We have used a combination of traditional combustion calorimetry with modern high-level ab initio calculations in order to obtain the molar enthalpies of vaporization of a series of the ionic liquids under study.     

Coordination of 1,10-phenanthroline and 2,2'-bipyridine to Li+ in different ionic liquids. How innocent are ionic liquids?

On the basis of (7)Li NMR measurements, we have made detailed studies on the influence of the ionic liquids [emim][NTf(2)], [emim][ClO(4)], and [emim][EtSO(4)] on the complexation of Li(+) by the bidentate N-donor ligands 2,2'-bipyridine (bipy) and 1,10-phenanthroline (phen). For each of the employed ionic liquids the NMR data implicate the formation of [Li(bipy)(2)](+) and [Li(phen)(2)](+), respectively. X-ray diffraction studies were performed to determine the coordination pattern in the solid state. In the case of [emim][ClO(4)] and [emim][EtSO(4)], crystal structures confirmed the NMR data, resulting in the complexes [Li(bipy)(2)ClO(4)] and [Li(phen)(2)EtSO(4)], respectively. On the contrary, the ionic liquid [emim][NTf(2)] generated the C(i) symmetric, dinuclear, supramolecular cluster [Li(bipy)(NTf(2))](2), where the individual Li(+) centers were found to be bridged by two [NTf(2)] anions. Density functional theory (DFT)-calculations lead to further information on the effect of stacking on the coordination geometry of the Li(+) centers.     

(2)(∞)[Co{1,4-C6H4(CN)2}2{NTf2}2][SnI{Co(CO)4}3](2)--a 2D coordination network with an intercalated carbonyl cluster

Dark red transparent crystals of [Co{1,4-C(6)H(4)(CN)(2)}(2){NTf(2)}(2)][SnI{Co(CO)(4)}(3)](2) are obtained by reacting SnI(4), Co(2)(CO)(8) and 1,4-C(6)H(4)(CN)(2) in the ionic liquid [EMIm][NTf(2)] (EMIm: 1-ethyl-3-methylimidazolium; NTf(2): bis(trifluoromethylsulfonyl)imide). According to X-ray structure analysis based on single crystals, the title compound crystallizes in a triclinic manner and contains the novel (2)(∞)[Co{1,4-C(6)H(4)(CN)(2)}(2){NTf(2)}(2)] coordination network. This infinite 2D network is composed of Co(2+) ions that are planarily interlinked by four 1,4-dicyanobenzene ligands. As a non-charged 2D network, Co(2+) is furthermore coordinated by two [NTf(2)](-) anions. The (2)(∞)[Co{1,4-C(6)H(4)(CN)(2)}(2){NTf(2)}(2)] layers are stacked on top of each other with SnI[Co(CO)(4)](3) molecules intercalated in distorted cubic gaps between the layers. The title compound is furthermore characterized by energy dispersive X-ray (EDX) analysis, thermogravimetry (TG), infrared spectroscopy (FT-IR) and optical spectroscopy (UV-Vis).     

Limiting diffusion coefficients of ionic liquids in water and methanol: a combined experimental and molecular dynamics study

Mutual diffusion coefficients D(12) of the ionic liquids 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C(2)MIM][NTf(2)]) and [C(4)MIM][NTf(2)] in highly diluted solutions of water and methanol have been measured at different temperatures between 288 K and 313 K using the Taylor dispersion technique. Tracer diffusion coefficients of the two cations [C(2)MIM](+) and [C(4)MIM](+) as well as the anion [NTf(2)](-) in these solutions have been obtained by molecular dynamics (MD) simulations. For our simulations we used well established force fields for the solvents water and methanol and a recently developed force field for imidazolium-based ionic liquid [C(n)MIM][NTf(2)]. Mutual diffusion coefficients D(12) have been calculated from the tracer diffusion coefficients using the Nernst-Hartley equation strictly valid only at low ionic concentration. The agreement between the diffusion coefficients reported in the literature, the experimental data obtained in this work and the MD results is excellent.     

Separation of benzene and hexane by solvent extraction with 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ionic liquids: effect of the alkyl-substituent length

The influence of the alkyl-substituent chain in 1-alkyl-3-methylimidazolium bis{(trifluoromethyl)sulfonyl}amide ionic liquids ([C(n)mim][NTf(2)], where n is the length of a linear alkyl chain) as solvents for the separation of benzene and hexane by liquid extraction was investigated. The liquid-liquid equilibrium (LLE) at 25 degrees C for the ternary systems ([C(n)mim][NTf(2)] + hexane + benzene), with n taking the values 4, 8, 10, and 12, were determined. These data were analyzed and compared to those previously reported for the system ([C(2)mim][NTf(2)] + hexane + benzene). The results show that short alkyl chains on the imidazolium cation of the ionic liquid lead to a better extractive separation of benzene and hexane, and reveal the influence of the relative degree of ordering in the ionic liquids on the extraction parameters.     

Aggregation of [Au(CN)4]- anions: examination by crystallography and 15N CP-MAS NMR and the structural factors influencing intermolecular Au···N interactions

To investigate the factors influencing the formation of intermolecular Au···NC interactions between [Au(CN)(4)](-) units, a series of [cation](n+)[Au(CN)(4)](n) double salts was synthesized, structurally characterized and probed by IR and (15)N{(1)H} CP-MAS NMR spectroscopy. Thus, [(n)Bu(4)N][Au(CN)(4)], [AsPh(4)][Au(CN)(4)], [N(PPh(3))(2)][Au(CN)(4)], [Co(1,10-phenanthroline)(3)][Au(CN)(4)](2), and [Mn(2,2';6',2'-terpyridine)(2)][Au(CN)(4)](2) show [Au(CN)(4)](-) anions that are well-separated from one another; no Au-Au or Au···NC interactions are present. trans-[Co(1,2-diaminoethane)(2)Cl(2)][Au(CN)(4)] forms a supramolecular structure, where trans-[Co(en)(2)Cl(2)](+) and [Au(CN)(4)](-) ions are found in separate layers connected by Au-CN···H-N hydrogen-bonding; weak Au···NC coordinate bonds complete octahedral Au(III) centers, and support a 2-D (4,4) network motif of [Au(CN)(4)](-)-units. A similar structure-type is formed by [Co(NH(3))(6)][Au(CN)(4)](3)·(H(2)O)(4). In [Ni(1,2-diaminoethane)(3)][Au(CN)(4)](2), intermolecular Au···NC interactions facilitate formation of 1-D chains of [Au(CN)(4)](-) anions in the supramolecular structure, which are separated from one another by [Ni(en)(3)](2+) cations. In [1,4-diazabicyclo[2.2.2]octane-H][Au(CN)(4)], the monoprotonated amine cation forms a hydrogen-bond to the [Au(CN)(4)](-) unit on one side, while coordinating to the axial sites of the gold(III) center through the unprotonated amine on the other, thereby generating a 2-D (4,4) net of cations and anions; an additional, uncoordinated [Au(CN)(4)](-)-unit lies in the central space of each grid. This body of structural data indicates that cations with hydrogen-bonding groups can induce intermolecular Au···NC interactions, while the cationic charge, shape, size, and aromaticity have little effect. While the ν(CN) values are poor indicators of the presence or absence of N-cyano bridging between [Au(CN)(4)](-)-units (partly because of the very low intensity of the observed bands), (15)N{(1)H} CP-MAS NMR reveals well-defined, ordered cyanide groups in the six diamagnetic compounds with chemical shifts between 250 and 275 ppm; the resonances between 260 and 275 ppm can be assigned to C-bound terminal ligands, while those subject to CN···H-N bonding resonate lower, around 250-257 ppm. The (15)N chemical shift also correlates with the intermolecular Au···N distances: the shortest Au-N distances also shift the (15)N peak to lower frequency. This provides a real, spectroscopically measurable electronic effect associated with the crystallographic observation of intermolecular Au···NC interactions, thereby lending support for their viability.     

Copper(I)-containing ionic liquids for high-rate electrodeposition

New metal-containing ionic liquids [Cu(CH(3)CN)(n)][Tf(2)N] (n=2, 4; Tf(2)N=bis(trifluoromethylsulfonyl)- amide) have been synthesised and used as a non-aqueous electrolyte for the electrodeposition of copper at current densities greater than 25 A dm(-2). The tetrahedral copper(I)-containing cation in [Cu(CH(3)CN)(4)][Tf(2)N] is structurally analogous to quaternary ammonium and phosphonium ionic liquids and overcomes problems of metal solubility and mass transport. Two CH(3)CN ligands are removed at elevated temperatures to give [Cu(CH(3)CN)(2)][Tf(2)N], which can be used as a concentrated non-aqueous electrolyte. The structural and electrochemical characterisation of these compounds is described herein.     

Unexpected reduction pathway of a Co(2+) salt to [HCo(CO)(4)] via [Co(2)(CO)(8)] in an ionic liquid

In the 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ionic liquid ([BMI][NTf(2)]), [Co(NTf(2))(2)] is reduced under 5.5 MPa of H(2)-CO to [Co(2)(CO)(8)] prior to [HCo(CO)(4)], provided a pyridine ligand is present in the medium.     

Metal Cyanide Ions Mx(CN)y]+,- in the gas phase: M = Fe,Co, Ni,Zn, Cd,Hg, Fe + Ag,Co + Ag

The generation of metal cyanide ions in the gas phase by laser ablation of M(CN)(2) (M = Co, Ni, Zn, Cd, Hg), Fe(III)[Fe(III)(CN)(6)] x xH(2)O, Ag(3)[M(CN)(6)] (M = Fe, Co), and Ag(2)[Fe(CN)(5)(NO)] has been investigated using Fourier transform ion cyclotron resonance mass spectrometry. Irradiation of Zn(CN)(2) and Cd(CN)(2) produced extensive series of anions, [Zn(n)(CN)(2n+1)](-) (1 < or = n < or = 27) and [Cd(n)(CN)(2n+1)](-) (n = 1, 2, 8-27, and possibly 29, 30). Cations Hg(CN)(+) and [Hg(2)(CN)(x)](+) (x = 1-3), and anions [Hg(CN)(x)](-) (x = 2, 3), are produced from Hg(CN)(2). Irradiation of Fe(III)[Fe(III)(CN)(6)] x xH(2)O gives the anions [Fe(CN)(2)](-), [Fe(CN)(3)](-), [Fe(2)(CN)(3)](-), [Fe(2)(CN)(4)](-), and [Fe(2)(CN)(5)](-). When Ag(3)[Fe(CN)(6)] is ablated, [AgFe(CN)(4)](-) and [Ag(2)Fe(CN)(5)](-) are observed together with homoleptic anions of Fe and Ag. The additional heterometallic complexes [AgFe(2)(CN)(6)](-), [AgFe(3)(CN)(8)](-), [Ag(2)Fe(2)(CN)(7)](-), and [Ag(3)Fe(CN)(6)](-) are observed on ablation of Ag(2)[Fe(CN)(5)(NO)]. Homoleptic anions [Co(n)(CN)(n+1)](-) (n = 1-3), [Co(n)(CN)(n+2)](-) (n = 1-3), [Co(2)(CN)(4)](-), and [Co(3)(CN)(5)](-) are formed when anhydrous Co(CN)(2) is the target. Ablation of Ag(3)[Co(CN)(6)] yields cations [Ag(n)(CN)(n-1)](+) (n = 1-4) and [Ag(n)Co(CN)(n)](+) (n = 1, 2) and anions [Ag(n)(CN)(n+1)](-) (n = 1-3), [Co(n)(CN)(n-1)](-) (n = 1, 2), [Ag(n)Co(CN)(n+2)](-) (n = 1, 2), and [Ag(n)Co(CN)(n+3)](-) (n = 0-2). The Ni(I) species [Ni(n)(CN)(n-1)](+) (n = 1-4) and [Ni(n)(CN)(n+1)](-) (n = 1-3) are produced when anhydrous Ni(CN)(2) is irradiated. In all cases, CN(-) and polyatomic carbon nitride ions C(x)N(y)(-) are formed concurrently. On the basis of density functional calculations, probable structures are proposed for most of the newly observed species. General structural features are low coordination numbers, regular trigonal coordination stereochemistry for d(10) metals but distorted trigonal stereochemistry for transition metals, the occurrence of M-CN-M and M(-CN-)(2)M bridges, addition of AgCN to terminal CN ligands, and the occurrence of high spin ground states for linear [M(n)(CN)(n+1)](-) complexes of Co and Ni.     

A general strategy for the experimental study of the thermochemistry of protic ionic liquids: enthalpy of formation and vaporisation of 1-methylimidazolium ethanoate

A general strategy to determine enthalpies of formation of protic ionic liquids, based solely on enthalpy of solution measurements, was conceived and tested for 1-methylimidazolium ethanoate, leading to Δ(f)H°(m){[Hmim][O(2)CCH(3)], 1} = -(425.7 ± 1.2) kJ mol(-1). This result in conjunction with the enthalpy of formation of gaseous 1-methylimidazole (mim) proposed in this work, Δ(f)H°(m)(mim, g) = 126.5 ± 1.1 kJ mol(-1), and Δ(f)H°(m)(CH(3)COOH, g) taken from the literature, allowed the calculation of the enthalpy of the vaporisation process [Hmim][O(2)CCH(3)](l) → mim(g) + CH(3)COOH(g) as Δ(vap)H°(m){[Hmim][O(2)CCH(3)]} = 119.4 ± 3.0 kJ mol(-1). The agreement between this value and Δ(vap)H°(m){[Hmim][O(2)CCH(3)]} = 117.3 ± 0.5 kJ mol(-1), obtained for the direct vaporisation of [Hmim][O(2)CCH(3)], by Calvet-drop microcalorimetry, gives a good indication that, as previously suggested by Fourier transform ion cyclotron resonance mass spectrometry, Raman spectroscopy, and GC-MS experiments, the vaporisation of [Hmim][O(2)CCH(3)] essentially involves a proton transfer mechanism with formation of the two volatile neutral precursor molecules (mim and CH(3)COOH). Although being a low ionicity protic ionic liquid, [Hmim][O(2)CCH(3)] was chosen to validate the methodology proposed here, since its vaporisation mechanism has been unequivocally demonstrated by different methods and for different pressure ranges.     

An electrochemical study of the oxidation of hydrogen at platinum electrodes in several room temperature ionic liquids

The electrochemical oxidation of dissolved hydrogen gas has been studied in a range of room-temperature ionic liquids (RTILs), namely [C(2)mim][NTf(2)], [C(4)mim][NTf(2)], [N(6,2,2,2)][NTf(2)], [P(14,6,6,6)][NTf(2)], [C(4)mpyrr][NTf(2)], [C(4)mim][BF(4)], [C(4)mim][PF(6)], [C(4)mim][OTf], and [C(6)mim]Cl on a platinum microdisk electrode of diameter 10 microm. In all cases, except [C(6)mim]Cl, a broad quasi-electrochemically reversible oxidation peak between 0.3 to 1.3 V vs Ag was seen prior to electrode activation ([C(6)mim]Cl showed an almost irreversible wave). When the electrode was pre-anodized ("activated") at 2.0 V vs Ag for 1 min, the peak separations became smaller, and the peak shape became more electrochemically reversible. It is thought that the electrogenerated protons chemically combine with the anions (A-) of the RTIL. The appearance and position of the reverse (reduction) peak on the voltammograms is thought to depend on three factors: (1) the stability of the protonated anion, HA, (2) the position of equilibrium of the protonation reaction HA<==> H+ + A- , and (3) any follow-up chemistry, e.g., dissociation or reaction of the protonated anion, HA. This is discussed for the five different anions studied. The reduction of HNTf(2) was also studied in two [NTf(2)]- -based RTILs and was compared to the oxidation waves from hydrogen. The results have implications for the defining of pKa in RTIL media, for the development of suitable reference electrodes for use in RTILs, and in the possible amperometric sensing of H2 gas.     

A theoretical investigation of the interaction between small Pd particles and 1-butyl-3-methyl imidazolium ionic liquids with Cl(-), BF(4)(-) and PF(6)(-) anions

Density functional calculations have been used to investigate the interaction between Pd(n) clusters (n = 1-6) and 1-butyl-3-methylimidazolium (Bmim(+)) based ionic liquids (ILs) with the anions [Cl(-)], [BF(4)(-)] and [PF(6)(-)]. The interaction of small Pd(n) clusters (1 ≤ n ≤ 6) with a single cation or anion is also studied. The interaction strengths in anion-Pd(n) categories with n = 1-6 follow the trend [Cl(-)] > [BF(4)(-)] > [PF(6)(-)]. The cation could also form interactions with Pd(n) clusters. Compared with a single anion or cation, the interaction could be strengthened when palladium particles interact with the whole ion pair. Further studies indicated that anionPd interaction is the decisive factor in the interaction between the Pd atom and the whole ion pair. The Pd(2) dimer interacts with the whole ion pair much more strongly than the Pd atom. Solvent effects have been considered in the present study by means of the polarizable continuum model. It is found that the stability of [Bmim(+)·BF(4)(-)]-Pd(n) and [Bmim(+)·PF(6)(-)]-Pd(n) complexes with n = 1 and 2 can be improved in solvents.     

Boron and nitrogen-rich carbons from ionic liquid precursors with tailorable surface properties

A novel strategy for tailoring the adsorption and structural properties of ionic liquid derived carbons has been developed. By changing the carbonization temperature and ratios of ionic liquids (ILs) containing a cross-linkable anion, such as 1-butyl-3-methylimidazolium tricyanomethanide [BMIm][C(CN)(3)] and 1-ethyl-3-methylimidazolium tetracyanoborate [EMIm][B(CN)(4)], boron and nitrogen-rich carbons with slit-like pores and specific surface areas exceeding 500 m(2) g(-1) have been prepared. Furthermore, the nitrogen-rich carbons exhibit high adsorption capacity for CO(2) adsorption and selectivity for CO(2)/N(2) separation.     

Transimination reactions in [b-3C-im][NTf2] ionic liquid

Compared to conventional molecular solvents, the ionic liquid [b-3C-im][NTf(2)] was found to promote transimination reactions with up to ～100-fold rate enhancement. This rate effect observed at ambient temperature might be explained by the fact that the ionic liquid displays weak Lewis acidity with very low, if any, nucleophilicity and its imidazolium cation is expected to interact by associating with, and thus electrophilically activating, the C=N bond of the starting imine, leading to increased stabilization of the polar, charged intermediate species and ultimately, rapid product formation. Moreover, the presence of 1 mol% Sc(OTf)(3) in [b-3C-im][NTf(2)] further facilitates the transimination reactions studied.     

Nicotine: on the potential role of ionic liquids for its processing and purification

Marked solubility differences of nicotine in the ionic liquids [C(2)mim][NTf(2)], [C(2)mim][EtOSO(3)], and [C(n)mim]Cl, 6 相似文献   

Nucleophilicity in ionic liquids. 2.(1) Cation effects on halide nucleophilicity in a series of bis(trifluoromethylsulfonyl)imide ionic liquids

In this work, the nucleophilicities of chloride, bromide, and iodide have been determined in the ionic liquids [bmim][N(Tf)(2)], [bm(2)im][N(Tf)(2)], and [bmpy][N(Tf)(2)] (where bmim = 1-butyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bmpy = 1-butyl-1-methylpyrrolidinium, and N(Tf)(2) = bis(trifluoromethylsulfonyl)imide). It was found that in the [bmim](+) ionic liquid, chloride was the least nucleophilic halide, but that changing the cation of the ionic liquid affected the relative nucleophilicities of the halides. The activation parameters DeltaH(), DeltaS(), and DeltaG() have been estimated for the reaction of chloride in each ionic liquid, and compared to a similar reaction in dichloromethane, where these parameters were found for reaction by both the free ion and the ion pair.     

Metal-metal interactions in platinum(II)/gold(I) or platinum(II)/silver(I) salts containing planar cations and linear anions

The salts [Pt{C(NHMe)(2)}(4)][Au(CN)(2)](2), [Pt{C(NHMe)(2)}(4)][Ag(2)(CN)(3)][Ag(CN)(2)], [Pt(en)(2)][Au(CN)(2)](2), [Pt(en)(2)][Ag(CN)(2)](2), and [Pt(bipy)(2)][Au(CN)(2)](2) have been prepared by mixing solutions of salts containing the appropriate cation with solutions of K[Au(CN)(2)] or K[Ag(CN)(2)]. Because the platinum atom in the cation is sterically protected, the structures of [Pt{C(NHMe)(2)}(4)][Au(CN)(2)](2) and [Pt{C(NHMe)(2)}(4)][Ag(2)(CN)(3)][Ag(CN)(2)] reveal no close metal-metal interactions. Colorless crystals of [Pt(en)(2)][Au(CN)(2)](2) and [Pt(en)(2)][Ag(CN)(2)](2) are isostructural and involve extended chains of alternating cations and anions that run parallel to the crystallographic a axis, along with isolated anions. In the chains, the metal-metal separations are relatively short: Pt...Au, 3.1799(3) Angstroms; Pt...Ag, 3.1949(2) Angstroms. In [Pt(bipy)(2)][Au(CN)(2)](2), each cation has axial interactions with the anions through close Pt...Au contacts [3.1735(6) Angstroms]. In addition, the anions are weakly linked through Au...Au contacts of 3.5978(9) Angstroms. Unlike the previously reported Pt/Au complex [Pt(NH(3))(4)][Au(CN)(2)](2).1.5H(2)O, which is luminescent, none of the salts reported here luminesce.     

Growth of sputter-deposited gold nanoparticles in ionic liquids

The growth of gold nanoparticles (NPs) synthesized by sputter deposition on an ionic liquid surface is studied in situ in the bulk phase of the ionic liquids (ILs) 1-butyl-3-methylimidazolium dicyanamide [C(1)C(4)Im][N(CN)(2)], 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [C(1)C(4)Im][Tf(2)N], 1-butyl-3-methylimidazolium tetrafluoroborate [C(1)C(4)Im][BF(4)], 1-butyl-3-methylimidazolium hexafluorophosphate [C(1)C(4)Im][PF(6)] and 1-butyl-3-methylimidazolium triflate [C(1)C(4)Im][TfO]. It is found that primary nanoparticles with a diameter smaller than 2.5 nm are present in the sample immediately after sputtering. Growth of these primary particles proceeds after the end of the sputtering process and stops when the nanoparticles reach a certain size. Depending on the viscosity of the ionic liquid this growth process can proceed several hours to several days. The growth speed is fastest for the least viscous ionic liquid and follows the trend [C(1)C(4)Im][N(CN)(2)] > [C(1)C(4)Im][Tf(2)N] > [C(1)C(4)Im][TfO] > [C(1)C(4)Im][BF(4)] > [C(1)C(4)Im][PF(6)]. It is also found that a higher concentration of sputtered gold results in faster growth of the gold nanoparticles. A discussion on the growth mechanism of sputtered gold NPs is included.     

Nanoscale Ru(0) particles: arene hydrogenation catalysts in imidazolium ionic liquids

The reduction of [Ru(COD)(2-methylallyl) 2] (COD = 1,5-cyclooctadiene) dispersed in various room-temperature ionic liquids (ILs), namely, 1- n-butyl-3-methylimidazolium (BMI) and 1- n-decyl-3-methylimidazolium (DMI), associated with the N-bis(trifluoromethanesulfonyl)imidates (NTf 2) and the corresponding tetrafluoroborates (BF 4) with hydrogen gas (4 bar) at 50 degrees C leads to well-dispersed immobilized nanoparticles. Transmission electron microscopy (TEM) analysis of the particles dispersed in the ionic liquid shows the presence of [Ru(0)] n nanoparticles (Ru-NPs) of 2.1-3.5 nm in diameter. Nanoparticles with a smaller mean diameter were obtained in the ILs containing the less coordinating anion (NTf 2) than that in the tetrafluoroborate analogues. The ruthenium nanoparticles in ionic liquids were used for liquid-liquid biphasic hydrogenation of arenes under mild reaction conditions (50-90 degrees C and 4 bar). The apparent activation energy of E A = 42.0 kJ mol (-1) was estimated for the hydrogenation of toluene in the biphasic liquid-liquid system with Ru-NPs/BMI.NTf 2. TEM analysis of the ionic liquid material after the hydrogenation reactions shows no significant agglomeration of the [Ru(0)] n nanoparticles. The catalyst ionic liquid phase can be reused several times without a significant loss in catalytic activity.