FT-IR, FT-Raman vibrational spectra and molecular structure investigation of 2-chloro-4-methylaniline: A combined experimental and theoretical study

In this work, the experimental and theoretical vibrational spectra of 2-chloro-4-methylaniline (2Cl4MA, C₇H₈NCl) were studied. FT-IR and FT-Raman spectra of 2Cl4MA in the liquid phase have been recorded in the region 4000–400 cm⁻¹ and 3500–50 cm⁻¹, respectively. The structural and spectroscopic data of the molecule in the ground state have been calculated by using Hartree-Fock (HF) and density functional method (B3LYP) with the 6-31G(d), 6-31G(d,p), 6-31+G(d,p), 6-31++G(d,p) and 6-311G(d), 6-311G(d,p), 6-311+G(d,p), 6-311++G(d,p) basis sets. The vibrational frequencies have been calculated and scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The DFT-B3LYP/6-311++G(d,p) calculations have been found more reliable than the ab initio HF/6-311++G(d,p) calculations for the vibrational study of 2Cl4MA. The optimized geometric parameters (bond lengths and bond angles) were compared with experimental values of aniline and p-methylaniline molecules.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of succinimide and N-bromosuccinimide

This work deals with the vibrational spectroscopy of succinimide and N-bromosuccinimide. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Unambiguous vibrational assignment of all the fundamentals were made using the total energy distribution (TED).     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of 1-bromo 4-fluoronaphthalene

The FTIR and FT-Raman spectra of 1-bromo 4-fluoronaphthalene have been recorded in the regions 4000-100cm(-1) and 3500-100cm(-1), respectively. The spectra were interpreted with the aid of normal coordinate analysis based on DFT (density functional theory) using standard B3LYP/6-311+G** basis set combination for the most optimized geometry. Normal coordinate calculations performed with the DFT force field and subsequently corrected by a recommended set of scale factors, yielded fairly good agreement between observed and calculated frequencies. On the basis of the comparison between calculated and experimental results, assignments of fundamental modes were examined.     

Simulation of IR and Raman spectra of p-hydroxyanisole and p-nitroanisole based on scaled DFT force fields and their vibrational assignments

This work deals with the vibrational spectroscopy of p-hydroxyanisole (PHA) and p-nitroanisole (PNA) by means of quantum chemical calculations. The mid and far FT-IR and FT-Raman spectra were recorded in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) with the standard B3LYP/6-31G* method and basis set combination and were scaled using various scale factors which yield a good agreement between observed and calculated frequencies. The vibrational spectra were interpreted with the aid of normal coordinate analysis based on scaled density functional force field. The results of the calculations were applied to simulate infrared and Raman spectra of the title compounds, which showed excellent agreement with the observed spectra.     

Analysis of vibrational spectra of 4-amino-2,6-dichloropyridine and 2-chloro-3,5-dinitropyridine based on density functional theory calculations

This work deals with the vibrational spectroscopy of 4-amino-2,6-dichloropyridine (ADCP) and 2-chloro-3,5-dinitropyridine (CDNP) by means of quantum chemical calculations. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) with the standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations, and was scaled using various scale factors which yields a good agreement between observed and calculated frequencies. The vibrational spectra were interpreted with the aid of normal coordinate analysis based on scaled density functional force field. The results of the calculations were applied to simulated infrared and Raman spectra of the title compounds, which showed excellent agreement with the observed spectra.     

Computational studies of the structure and vibrational spectra of hexafluorodisilane

Ab initio calculations predict that D_3d symmetry of Si₂F₆ is more stable than D_3h symmetry. The calculated potential barrier to internal rotation was 0.77, 0.73 and 0.78 kcal/mol using HF/6-31G*, B3LYP/6-31G* and MP2/6-31G* methods respectively, which was in good agreement with the experimental value between 0.51±0.10 and 0.73±0.14 kcal/mol. The optimized geometries, harmonic force fields, infrared intensities, Raman activities, and vibrational frequencies are reported for D_3d symmetry of Si₂F₆ from HF/6-31G* and B3LYP/6-31G*. A normal coordinate analysis was carried out. The average error between the scaled DFT frequencies obtained from the B3LYP/6-31G* calculation and observed frequencies was 4.2 cm⁻¹ and the average error between the scaled HF and observed frequencies was 2.2 cm⁻¹.     

Density functional and experimental studies on the FT-IR and FT-Raman spectra and structure of 2,6-diamino purine and 6-methoxy purine

FT-IR and FT-Raman spectra of 2,6-diamino purine (DAP) and 6-methoxy purine (MP) have been recorded in the regions of 4000-400cm(-1) and 3500-100cm(-1), respectively. The spectra were interpreted with the aid of normal coordinate analysis following full structure optimizations and force field calculations based on density functional theory (DFT) using standard B3LYP/6-31G* and B3LYP/6-311+G** method and basis set combinations. Normal coordinate calculations were performed with the DFT force field corrected by a recommended set of scaling factors yielding fairly good agreement between observed and calculated frequencies.     

DFT studies, vibrational spectra and conformational stability of 4-hydroxy-3-methylacetophenone and 4-hydroxy-3-methoxyacetophenone

The FT-IR and FT-Raman spectra of 4-hydroxy-3-methylacetophenone (HMA) and 4-hydroxy-3-methoxyacetophenone (HMOA) have been recorded. The total energy calculations of HMA and HMOA were tried for various possible conformers. The spectra were interpreted with the aid of normal coordinate analysis based on density functional theory (DFT) using standard B3LYP/6-31G* and B3LYP/6-311+G** methods and basis sets combinations for the most optimized geometries. Normal coordinate calculations were performed with the DFT force field corrected by a recommended set of scaling factors yielding fairly good agreement between observed and calculated frequencies. On the basis of the comparison between calculated and experimental results, assignments of fundamental modes were examined.     

Vibrational assignment of the spectral data and thermodynamic properties of 2-chloro-4-fluorobenzophenone using DFT quantum chemical calculations

The FT-Raman (3500-100 cm⁻¹) and FT-IR (4000-450 cm⁻¹) spectra of 2-chloro-4-fluorobenzophenone were recorded in the solid phase. Density functional theory calculations with B3LYP/6-31G (d, p) basis set was used to determine the ground state molecular geometries (bond lengths and bond angles), harmonic vibrational frequencies, infrared intensities and Raman activities of this compound. Potential energy distributions (PEDs) and normal modes, for the spectral data computed at B3LYP/6-31G (d, p) level, have also been obtained from force-field calculations. The wavenumbers found after scaling of the force field showed very good agreement with the experimentally determined values. A comparison of the theoretical spectra and experimental FT-IR and FT-Raman spectra of the title molecule has been made and full vibrational assignments of the observed spectra have been proposed. On the basis of vibrational analyses, the thermodynamic properties of title compound at different temperatures have been calculated.     

An experimental and theoretical study of molecular structure and vibrational spectra of 2-chloronicotinic acid by density functional theory and ab initio Hartree–Fock calculations

In this work, the Fourier transform Raman and Fourier transform infrared spectra of 2-chloronicotinic acid (2-CNA) are recorded in the solid phase. The molecular geometry, vibrational frequencies, infrared intensities and Raman scattering activities of 2-CNA in ground state have been calculated by using ab initio Hartree–Fock (HF) and density functional (B3LYP and B3PW91) methods with 6-31G(d) and 6-311G(d) basis sets level. On the basis of the comparison between calculated and experimental results and the comparison with related molecule, assignments of fundamental vibrational modes are examined. The optimized geometric parameters (bond lengths and bond angles) obtained by using HF show the best agreement with the experimental values of 2-CNA. Comparison of the observed fundamental vibrational frequencies of 2-CNA and calculated results by density functional (B3LYP and B3PW91) and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock and B3PW91 approach for molecular vibrational problems.     

Vibrational Spectra, Assignment, Conformational Stability and Ab Initio/DFT Calculations for 1-Nitropropane

The infrared spectra (4000–400 cm^{– 1}) of solid and the Raman spectra (3500–30 cm^{– 1}) of liquid and solid 1-nitropropane, CH₃CH₂CH₂NO₂, have been registered. Both the trans and gauche conformers have been identified in the fluid phase, while the trans form remains in the stable solid. Temperature dependence (190–230K) of the liquid 1-nitropropane Raman spectra has been carried out. From these data, the enthalpy difference was determined to be 870 ± 105 J-mol^–1, with the gauche conformer being the more stable rotamer. Ab initio and DFT calculations at different levels of approximation (HF, MP2, B3LYP, B3PW91) gave optimized geometries, harmonic force fields, and vibrational frequencies for the trans and gauche conformers. All the calculations (except the B3PW91/6-31G* level) predicted gauche as the low-energy conformer. Theoretical force constants are analyzed for formulating constraints in the molecular force field model of 1-nitropropane.     

Si~2Cl~6分子的内旋转能垒和振动基频的理论研究

用从头算方法HF/6-31G^*^*和密度函方法B3LYP/6-31G^*^*,对Si~2Cl~6分子的平衡几何构型进行优化,优化的结果与实验结果吻合得较好.并用上述两种不同的方法计算Si~2Cl~6分子的内旋转能垒,结果分别为8.786和6.694kJ/mol,其中DFT方法的计算结果与实验结果4.18kJ/mol吻合得较好.对Si~2Cl~6分子的振动基频进行计算.用HF/6-31G^*^*SQM力场所计算的频率理论值与实验值的平均误差为7.3cm^-^1,用B3LYP/6-31G^*^*未标度的力场所计算的频率理论值与实验值的平均误差为6.0cm^-^1.该密度泛函方法(B3LYP/~6-31G^*^*)的理论计算值比用HF/6-31G^*^*标度后的SQM力场计算的频率与实验值(除Si--Si键扭转振动基频之外的11条振动基频)吻合得更好.并给出了Si--Si键扭转振动基频的预测值。     

Molecular structure and vibrational assignment of melaminium phthalate by density functional theory (DFT) and ab initio Hartree-Fock (HF) calculations

The molecular geometry, the normal mode frequencies and corresponding vibrational assignment of melaminium phthalate (C₃H₇N₆⁺·C₈H₅O₄⁻) in the ground state were performed by HF and B3LYP levels of theory using the 6-31G(d) basis set. The optimized bond length numbers with bond angles are in good agreement with the X-ray data. The vibrational spectra of melaminium phthalate which is calculated by HF and B3LYP methods, reproduces vibrational wave numbers with an accuracy which allows reliable vibrational assignments. The title compound has been studied in the 4000–100 cm⁻¹ region where the theoretical evaluation and assignment of all observed bands were made.     

FT-IR and FT-Raman, UV spectroscopic investigation of 1-bromo-3-fluorobenzene using DFT (B3LYP, B3PW91 and MPW91PW91) calculations

The FT-IR and FT-Raman spectra of 1-bromo-3-fluorobenzene (C₆H₄FBr) molecule have been recorded using Bruker IFS 66 V spectrometer in the range of 4000–100 cm⁻¹. The molecular geometry and vibrational frequencies in the ground state are calculated using the DFT (B3LYP, B3PW91 and MPW91PW91) methods with 6-31++G(d,p) and 6-311++G(d,p) basis sets. The computed values of frequencies are scaled using a suitable scale factor to yield good coherence with the observed values. The isotropic DFT (B3LYP, B3PW91 and MPW1PW91) analysis showed good agreement with the experimental observations. Comparison of the fundamental vibrational frequencies with calculated results by B3LYP methods. The complete data of this molecule provide the information for future development of substituted benzene. The influence of bromine and fluorine atom on the geometry of benzene and its normal modes of vibrations has also been discussed. A study on the electronic properties, such as absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies, was performed by time dependent DFT (TD-DFT) approach. The electronic structure and the assignment of the absorption bands in the electronic spectra of steady compounds were discussed. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. On the basis of the thermodynamic properties of the title compound at different temperatures have been calculated in gas phase, revealing the correlations between standard heat capacities (C) standard entropies (S), standard enthalpy changes (H) and temperatures.     

Scaled quantum chemical calculations and FTIR, FT-Raman spectral analysis of 3,4-diamino benzophenone

The vibrational spectra of 3,4-diamino benzophenone (DABP) have been computed using B3LYP methodology and 6-31G* and 6-31G** basis sets. The solid phase FTIR and FT-Raman spectra were recorded in the region 4000-400 cm-1 and 3500-100 cm-1, respectively. A close agreement was achieved between the observed and calculated frequencies by employing normal coordinate calculations. The observed and simulated spectra were found to be well comparable.     

Vibrational analysis of 1,4-diaminoanthraquinone and 1,5-dichloroanthraquinone. A joint FTIR, FT-Raman and scaled quantum mechanical study

This work deals with the vibrational spectroscopy of 1,4-diaminoanthraquinone (1,4-DAAQ) and 1,5-dichloroanthraquinone (1,5-DCAQ). The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of the vibrational bands were evaluated using density functional theory (DFT) with the B3LYP functional and 6-31G* basis set. The vibrational spectra were interpreted with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Unambiguous vibrational assignment of all the fundamentals were made using the potential energy distribution (PED).     

Ab initio, density functional theory and structural studies of 4-amino-2-methylquinoline

The Fourier transform infrared (FTIR) and FT-Raman spectra of 4-amino-2-methylquinoline (AMQ) have been recorded in the range 4000–400 and 4000–100 cm⁻¹, respectively. The experimental vibrational frequency was compared with the wavenumbers obtained theoretically by ab initio HF and DFT–B3LYP gradient calculations employing the standard 6-31G** and high level 6-311++G** basis sets for optimised geometry of the compound. The complete vibrational assignment and analysis of the fundamental modes of the compounds were carried out using the experimental FTIR and FT-Raman data, and quantum mechanical studies. The geometry and normal modes of vibration obtained from the HF and DFT methods are in good agreement with the experimental data. The potential energy distribution of the fundamental modes was calculated with ab initio force fields utilising Wilson's FG matrix method. The NH-π interactions and the influence of amino and methyl groups on the skeletal modes are investigated.     

Molecular structure, IR spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole by density functional theory and ab initio Hartree–Fock calculations

Quantum chemistry calculations have been performed using Gaussian03 program to compute optimized geometry, harmonic vibrational frequency along with intensities in IR and Raman spectra and atomic charges at RHF/6-31+G*, B3LYP/6-31+G* and B3LYP/6-31++G* levels for 2-mercaptobenzothiazole (MBT, C₇H₅NS₂) and 2-mercaptobenzoxazole (MBO, C₇H₅NOS) in the ground state. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR and FT-Raman spectra. The results show that the scaled theoretical vibrational frequencies is very good agreement with the experimental values. A detailed interpretation of the infrared and Raman spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole was reported. Comparison of calculated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

Density functional theory investigations on the conformational stability and vibrational spectra of the model compound of vitamin K

Becke 3-Lee–Yang–Parr density functional theory (DFT/B3LYP) using 6-31G(d) and 6-311G(d) basis sets and the scaled quantum mechanics (SQM) force field method are used to study molecular conformations and vibrational spectra of a model compound of vitamin K (VK). In this molecule, there are six conformers on the torsional potential energy map of the dihedral angles C₈C₁₄C₁₅C₁₆ () and C₇C₈C₁₄C₁₅ (β). It is shown that the VK_1 conformer ( = 237.7° and β = 274.2°) is the most stable form. For this lowest energy conformer, the harmonic force fields calculated by B3LYP/6-311G(d) and B3LYP/6-31G(d) methods are scaled with one scale factor of 0.9623 and a set of different scale factors transferred from the previous studies for the other similar molecules, respectively. The vibrational frequencies, IR intensities, and Raman activities are obtained for the lowest energy conformer. On the basis of B3LYP calculations, the normal mode analysis is performed to assign the vibrational fundamental frequencies according to the potential energy distributions. The computational frequencies are in good agreement with the observed results.