Synthesis,curing and properties of poly(phthalazione ether sulfone ketone) copolymers crosslinked by click chemistry

Functionalized poly(phthalazinone ether sulfone ketone) was synthesized by successive chloromethylation and azidation, followed by curing reaction with the propargyl end-groups of various molecular weight crosslinking agents in the presence of Cu(Ⅰ) catalyst via the azide-alkyne click reaction. The influences of the chain length of crosslinking agents on the poly(phthalazinone ether sulfone ketone) system were studied. FTIR and DSC tests demonstrated certain crosslinking by azide-alkyne reaction with the formation of triazole ring. DSC results showed that curing temperature shifted to lower temperatures considerably in the presence of Cu(Ⅰ) catalyst. TGA showed cured polymers were of much higher thermal stability, including higher thermal decomposition temperatures and higher char-yielding properties. After being cured, the polymers became insoluble in organic solvents and the gel fraction of the cured polymers exceeded 71%. Wide-angle X-ray diffraction results indicated there was a short distance order in the poly(ether sulfone)(PES) main chain except for the azido methyl poly(phthalazinone ether sulfone ketone) and 4,4'-bis(2-propynyloxy) biphenyl( AMPPESK-BP) system.     

Synthesis and characterization of carborane-containing poly(hydroxy ethers) with excellent thermal stability

o-Carborane-containing poly(hydroxy ethers)(P1, P2 and P3) were synthesized via "advancement reaction" of o-carborane-containing bisphenol(4) and diglycidyl ether of bisphenols(DGEBA and 1). FTIR and ~(1) H-, ~(13)C-, and ~(11) B-NMR were utilized to characterize the obtained polymers. TGA test was conducted under nitrogen and air. It is found that the shielding effect of carborane moiety on its adjacent aromatic structures contributes to high initial decomposition temperatures, while oxygen in air has an adverse effect on the initial decomposition temperature. The oxygen can combine with polymer chain to form peroxide and hydroperoxide groups, which are more reactive during the degradation process. Besides, o-carborane-containing poly(hydroxy ethers) have high char yield at elevated temperatures. The boron atom combines with oxygen from the polymer structure or/and from air, thus to form a three-dimensional network linked with B―O―B and B―C bonds, and retain the polymer weight to a large extent.     

SYNTHESIS AND FREE RADICAL POLYMERIZATION OF 2-OXO-3-METHYLEN E-5-PHENYL-1,4-DIOXAN

The novel cyclic monomer, 2-oxo-3-methylene-5-phenyl-1,4-dioxan, was synthesized by a set of reactions. Several intermediates were prepared and characterized in order to determine the monomer structure. The presence of chiral centers in the intermediates and resulting monomer makes it complicated to separate , purify and characterize them. It is a very reactive monomer which will polymerize even at room temperature if expose to moisture and air. This monomer can undergo essentially quantitative flee radical ring opening polymerization. The driving force for ring opening is the formation of new carbonyl group and benzylic radical. The monomer and polymer structure were established by IR, ~1H NMR, ~(13)C NMR and elemental analysis or high resolution mass spectrum. The molecular weight of the resulting polymer was estimated by viscosity determination.     

SYNTHESIS AND POLYMERIZATION OF BISPHENYLENE ORTHOCARBONATE

Bisphenylene orthocarbonate (Ⅱ) was synthesized by the reaction of dicopper catecholate with carbon tetrachloride, and underwent cationic ring-opening polymerization with the introduction of phenyl group into the main chain. The obtained polymer with ester and ether group was verified by IR and ~1H NMR spectra. Based on the analysis of the polymer structures, the polymerization mechanism was proposed. Its T_m and T_(?) are 254℃and 160℃respectively. No decomposition of the polymer was observed below 320℃. The volume expansion property of the monomer during polymerization was studied by measuring the density difference between Ⅰand its polymer at various temperatures.     

A STUDY ON THE DEGRADATION MECHANISM OF PHOTOCROSSLINKING PRODUCTS FORMED BY CYCLIZED POLYISOPRENE-DIAZIDE SYSTEM UNDER THE INFLUENCE OF ALKYL BENZENE SULFONIC ACIDS

The degradation mechanism of photocrosslinking products formed by cyclized polyisoprene-diazide system under the influence of the different alkyl benzene sulfonic acids was studied. The effects of alkyl chain length and the concentration of alkyl benzene sulfonic acids on the rate of degradation reaction were discussed. It was found that in the initial stage of degradation, the cyclicity ratio and the average fused ring number did not change considerably, but the percentage of uncyclized parts content varied significantly. The suitable mechanism was supposed.     

Determination of degradation apparent activation energy values of polymers

The isothermal degradation of three aromatic polyetherketones was studied in an inert environment at various temperatures in the range 683-803 K. In the first degradation stage (mass loss D￡20%) a linear increase of D as a function of heating time (t) was observed and the corresponding kinetic D=D _o+bt equations at various temperatures were directly drawn by smoothing the experimental TG data. The b values, which represent the mass loss rates during degradation, increased as a function of temperature according to Arrhenius-type equations, from which degradation E _a values were determined, which appear in agreement with those from literature methods. Some differences observed were discussed and interpreted. This revised version was published online in July 2006 with corrections to the Cover Date.     

Molecular dynamics simulations of the hydration of poly(vinyl methyl ether):Hydrogen bonds and quasi-hydrogen bonds

Atomistic detailed hydration structures of poly(vinyl methyl ether)(PVME) have been investigated by molecular dynamics simulations under 300 K at various concentrations. Both radial distribution functions and the distance distributions between donors and acceptors in hydrogen bonds show that the hydrogen bonds between the polymer and water are shorter by 0.005 nm than those between water molecules. The Quasi-hydrogen bonds take only 7.2% of the van der Waals interaction pairs. It was found the hydrogen bonds are not evenly distributed along the polymer chain,and there still exists a significant amount(10%) of ether oxygen atoms that are not hydrogen bonded to water at a concentration as low as 3.3%. This shows that in polymer solutions close contacts occur not only between polymer chains but also between chain segments within the polymer,which leads to inefficient contacts between ether oxygen atoms and water molecules. Variation of the quasi-hydrogen bonds with the concentration is similar to that of hydrogen bonds,but the ratio of the repeat units forming quasi-hydrogen bonds to those forming hydrogen bonds approaches 0.2. A transition was found in the demixing enthalpy at around 30% measured by dynamic testing differential scanning calorimetry(DTDSC) for aqueous solutions of a mono-dispersed low molecular weight PVME,which can be related to the transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27%. The transition of the fractions of hydrogen bonds and quasi-hydrogen bonds at ～27% can be used to explain the demixing enthalpy transition at 30% at a molecular scale. In addition,at the concentration of 86%,each ether oxygen atom bonded with water is assigned 1.56 water molecules on average,and 'free' water molecules emerge at the concentration of around 54%.     

Thermal degradation of organo-soluble polyimides

The thermal degradation behavior of two organo-soluble polyimides was investigated by high resolution pyrolysis-gas chromatography/mass spectrometry. The pyrolyzates of the polymers at various temperatures were identified and characterized quantitatively. The relationship between the polymer structure and pyrolyzate distribution was discussed. The kinetic parameters of the thermal degradation were calculated based on thermogravimetric measurements. Finally, the thermal degradation mechanism for the polymers was suggested.     

Methane hydrate stability in the presence of water-soluble hydroxyalkyl cellulose

The effect of low-dosage water-soluble hydroxyethyl cellulose (approximate MW～90,000 and 250,000) as a member of hydroxyalkyl cellulosic polymer group on methane hydrate stability was investigated by monitoring hydrate dissociation at pressures greater than atmospheric pressure in a closed vessel. In particular, the influence of molecular weight and mass concentration of hydroxyethyl cellulose (HEC) was studied with respect to hydrate formation and dissociation. Methane hydrate formation was performed at 2℃ and at a pressure greater than 100 bar. Afterwards, hydrate dissociation was initiated by step heating from -10℃ at a mild pressure of 13 bar to 3℃, 0℃ and 2℃. With respect to the results obtained for methane hydrate formation/dissociation and the amount of gas uptake, we concluded that HEC 90,000 at 5000 ppm is suitable for long-term gas storage and transportation under a mild pressure of 13 bar and at temperatures below the freezing point.     

Soluble and degradable polyimides with phenyl-2-pyridyl ether structure: Synthesis and characterization

A diamine monomer o-phenylenedioxybis(5-amino-2-pyridine) was synthesized via reduction of a dinitro compound o-phenylenedioxybis(5-nitro-2-pyridine), producing a series of new polyimides from this diamine and various commercially available aromatic dianhydrides via conventional two-stage processes. The resulting polyimides are able to form tough and transparent films, with decomposition temperatures in the range of 529–551 °C, and can be dissolved in organic polar solvents. Meanwhile, these polyimides can be degraded in a hydrazine hydrate medium, a degradation mechanism proposed by analyzing the degradation products suggests that the degradable properties could be attributed to the phenyl-2-pyridyl ether structure in the polymer. In addition, the transformation of the compound structure from dinitro compound to damine monomer in the synthetic process is discussed in respect to X-ray structure.     

Surface Heparinization of Poly(ether ether ketone)

Photo-grafting of hydrophilic monomer and space arms was used to enhance the hydrophilicity of poly(ether ether ketone)(PEEK) with the aim of extending its application to biological fields. PEEK films were surface modified by UV grafting of acrylic acid(AA) to introduce ―COOH on PEEK surface. Adipic amine was used as a space arm to introduce heparin on PEEK surface based on the condensation reaction between ―NH₂ and ―COOH. The modified PEEK(PEEK-COOH, PEEK-NH₂ and PEEK-Hep) was characterized by energy-disperse spectroscopy (EDS), X-ray photoelectron spectroscopy(XPS) and water contact angle measurements, which show that heparin was grafted on PEEK surface. The contact angles of modified PEEK films were lower than those of original films, demonstrating a significant improvement of surface hydrophilicity.     

聚醚砜醚酮的合成与性能

以4,4′-二羟基二苯砜和4,4′-二氟二苯酮为单体, 通过溶液缩聚合成了聚醚砜醚酮(PESEK), 其分子结构相当于聚醚砜(PES)与聚醚醚酮(PEEK)的交替共聚物. 在共聚物分子中, 存在砜基、醚基和酮基, 整个结构单元形成了大共轭体系, 聚合物属无定形聚合物, 玻璃化转变温度(Tg)为198 ℃, 介于PEEK和PES的Tg之间, 其热稳定性和加工性能优于PES, 而力学性能与PES接近.     

含氟聚醚醚酮酮的制备及其性能

以邻氟对苯二酚和4,4′-二氟三苯二甲酮为原料通过亲核缩聚反应,合成含氟聚醚醚酮酮(FPEEKK)材料。 用FTIR、1H NMR和WAXD进行了结构表征,用DSC、TGA测试了热性能,并研究了聚合物的溶解性、吸水性、介电性能及光学性能。 结果表明,含氟聚醚醚酮酮具有较好的热性能（N2气气氛中,5%热分解温度为505 ℃）;能溶于氯仿、四氢呋喃和N,N-二甲基甲酰胺等有机溶剂;具有较低的吸水率(0.24%)和介电常数（ε=3.0）;在近红外区1300和1550 nm处吸收非常弱。     

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) and poly(aryl ether ether ketone)

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) (M‐PAEK) and poly(aryl ether ether ketone) (PEEK) has been investigated by means of differential scanning calorimetry (DSC), polarized light microscopy (PLM), and scanning electron microscopy (SEM) techniques. The measurements reveal that the formation of the rhythmically grown ring‐banded spherulites in the M‐PAEK/PEEK blends is strongly dependent on the blend composition. In the M‐PAEK‐rich blends, upon cooling, an unusual ring‐banded spherulite is formed, which is ascribed to structural discontinuity caused by a rhythmic radial growth. For the 50:50 M‐PAEK/PEEK blend, ring‐banded spherulites and individual PEEK spherulites coexist in the system. In the blends with PEEK as the predominant component, M‐PAEK is rejected into the boundary of PEEK spherulites. The cooling rate and crystallization temperature have great effect on the phase behavior, especially the ring‐banded spherulite formation in the blends. In addition, the effects of M‐PAEK phase transition rate and phase separation rate on banded spherulite formation is discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3011–3024, 2007     

Immobilization of Bovine Serum Albumin on Poly(ether ether ketone)for Surface Biocompatibility Improvement

UV-induced graft polymerization of acrylic acid(AA)on poly(ether ether ketone)(PEEK)films was carried out to introduce-COOH for the subsequent immobilization of bovine serum albumin(BSA).BSA was introd...     

新型可溶性含氟聚芳醚酮的合成、表征及性能

制备了新型可溶性含氟聚芳醚酮高性能材料, 使该材料结合了含氟聚合物与聚芳醚酮两种材料的优点, 既具有很好的热稳定性、溶解性和阻燃性, 又有较低的介电常数和吸湿性[5,9,10]. 对于提高聚芳醚酮类材料的性能, 拓展其使用范围和加工方法具有很大的开发前景和实用价值.     

新型低介电常数聚芳醚酮的合成及性能研究

近年来,随着对高分子材料功能化研究的深入,合成了许多具有特殊性能的聚芳醚酮．聚芳醚酮是一类综合性能优异的半结晶性特种工程塑料,在分子链中引入氟官能团可降低聚合物的介电常数．然而,不对称强极性氟的引入增加了聚合物分子的极性,不利于进一步降低介电常数,且在高温加工时容易放出氟化氢．因此,无氟、低氟的低介电高分子材料将会有很好的发展前景．     

聚醚醚酮/聚醚醚酮酮共混体系的熔融和等温结晶行为

采用熔融共混方法制备了聚醚醚酮和聚醚醚酮酮的共混物,用DSC对共混物的熔融行为和等温结晶行为进行了研究.结果表明,共混物熔点随聚醚醚酮含量增加而降低,但与聚醚醚酮酮有相同的平衡熔点,二者共混没有改变其结晶的成核与生长机制.     

主链含酰亚胺结构的聚醚醚酮的合成及其性能

以1,4-二苯氧基苯为单体分别与N,N′-(4,4′-二苯甲烷)-双-(3,4-二甲酰亚胺基苯甲酰氯)和N,N′-(4,4′-二苯砜)-双-(3,4-二甲酰亚胺基苯甲酰氯),采用低温溶液缩聚合成了2种主链含酰亚胺结构的聚醚醚酮树脂,聚合物的比浓对数粘度分别为0.98和0.61 dL/g。 用FT-IR、¹H NMR和WAXD进行了结构表征,用DSC和TGA测试了热性能。 结果表明,聚合物有较高的玻璃化转变温度(T_g分别为236和263 ℃),N₂气气氛中热分解温度(5%T_d)分别为529和512 ℃,能溶于N,N-二甲基乙酰胺、N-甲基-2-吡咯烷酮、氯仿和间甲酚等常见的有机溶剂中。     

填充型具有微孔结构的磺化聚芳醚砜/聚醚砜复合质子交换膜的制备及性能

制备了基于磺化聚芳醚砜(SPAES)及聚醚砜(PES)的填充型复合质子交换膜, 研究了其吸水率、 尺寸变化、 热-机械特性、 质子电导率、 甲醇透过性及稳定性等性能. 通过浸入沉淀相转化法, 采用磺化度分别为30%(S30), 40%(S40)及50%(S50)的SPAES与PES制备了系列微孔型复合质子交换膜 Sx-y(x为SPAES的磺化度, y为SPAES的质量分数); 然后利用真空抽滤法在微孔中填充S50制备了相应的填充型复合质子交换膜Sx-y+F50. 结果表明, 由于微孔的引入及皮层结构的存在, Sx-y膜在低离子交换容量(IEC)条件下仍具有较高的电导率、 优良的机械强度、 优异的化学稳定性及较低的甲醇透过性. 经S50填充后, Sx-y+F50膜的IEC及电导率明显提升, 甲醇透过率大幅下降, 但机械强度及化学稳定性未见劣化. 其中S30-40+F50膜(IEC=0.69 mmol/g)的综合性能最佳, 其质子电导率在90 ℃水中达到50.4 mS/cm; 经140 ℃水处理24 h后失重率仅为8.2%, 质子电导率降低仅9%; 经过芬顿试剂(3% H₂O₂, 20 mg/L FeSO₄, 80 ℃, 1 h)处理后失重率仅为0.66%; 甲醇透过率仅为6.8×10^-8 cm²/s.