Perfluoroalkylation of benzene derivatives. An improved synthesis of 1,3-bis(2-hydroxyhexafluoro-2-propyl)-5-(perfluoro-n-alkyl)benzenes

A three-step high yield synthesis of various 1,3-bis(2-hydroxyhexafluoro- 2-propyl)-5-(perfluoro-n-alkyl)benzenes is described. Significant improvements in the iodination and perfluoro-alkylation of a perfluoroalkylbenzene diol have been achieved. Copper coupling of straight-chain perfluoroalkyl iodides with the iodobenzene derivative in DMSO gave the desired compounds as DMSO complexes in 78–91 percent yield.     

Dimethyl azo(bisisobutyrate) and C(60) produce 1,4- and 1, 16-Di(2-carbomethoxy-2-propyl)-1,x-dihydro

Thermal decomposition of dimethyl azo(bisisobutyrate) in a solution containing C(60) produced 1,4- and 1, 16-di(2-carbomethoxy-2-propyl)-1,x-dihydro[60]fullerenes in yields of 21% and 27%, respectively, based on reacted C(60). The structure of this first 1,16-dialkyl-1,16-dihydro[60]fullerene was assigned from (13)C 2D INADEQUATE NMR spectra. The 1,16-isomer has first and second electrochemical reduction potentials shifted positively by 0. 18 V relative to those of the 1,4-isomer. From the close similarity of all spectral, chromatographic, and electrochemical data, the previously unassigned isomer of 1,x-di(2-cyano-2-propyl)-1, x-dihydro[60]fullerene, which was obtained from azo(bisisobutyronitrile) and C(60), is also a 1,16-isomer.     

Synthesis and base hydrolysis of chloro(N-(2-pyridinylmethylene)-N′-[3-[(2-pyridinylmethylene)amino]-propyl]-1,3-propanediamine)cobalt(III) perchlora

Synthesis of [Co(pyDPT)Cl](ClO₄)₂ from pentadentate ligand and cobalt(II) yields one cis isomer. Hydrolysis in base is extremely rapid (k_OH 1.8 × 10⁶ M^?1 s^?1 at 250°) in this complex, where the geometry and ligand character fix the single site for conjugate base formation as cis to the leaving group.     

Stereocontrolled synthesis of the enantiomers of 1-[2-hydroxy-3-(4-phenyl-1-piperazinyl)-propyl]-pyrrolidin-2-one

The asymmetric synthesis of 1-[2-hydroxy-3-(4-phenyl-1-piperazinyl)-propyl]-pyrrolidin-2-one 1 is described. Enantiomers of compound 1 were obtained using the Sharpless asymmetric dihydroxylation (AD) or hydrolytic kinetic resolution (HKR) methods. The enantiomers of compound 1, which were obtained by HKR had higher enantiomeric excesses than those which were synthesized by AD and epoxidation. The enantiomeric purity of the synthesized compounds was determinated by capillary electrophoresis.     

Two Stage Solid Phase Extraction with Subsequent HPLC Isolation for Structure Elucidation of Major Metabolites of (+)-(R)-2-{3-(benzo[1,4]dioxan-2-yl-methylamino)-1-propyl}-3(2H)-pyridazinone (GYKI-16084)

GYKI-16084 – (+)-(R)-2-{3-(benzo[1,4]dioxan-2-yl-methylamino)-1-propyl}-3(2H)-pyridazinone hydrochloride – is a new drug candidate for the treatment of benign prostatic hyperplasia. In our study the major metabolites formed in the rat and dog were isolated from dog and rat urine, then their structures were elucidated by means of MS and NMR. A two stage solid phase extraction (SPE) procedure and a semi-preparative HPLC method were developed utilizing various mechanisms of separation. The major metabolites proved to be isomeric glucuronides of the benzodioxane moiety hydroxylated at positions 6 or 7 and {2-(2-carboxyethyl)-3(2H)-pyridazinone}.     

Mass spectrometric determination of tris(1,3-dichloro-2-propyl)-phosphate (TDCP) using NCI-technique

A number of different products suspected to contain flame retardants were analysed. TDCP was found in 11 out of 104 samples. It was most common in polyurethane products such as sound absorbing materials and liners for cars and buses. To get an integrated picture of TDCP exposure the contents of vacuum cleaner bags from two homes were analysed. One of these contained TDCP. To investigate possible presence in humans, blood samples were analysed. For clean-up, Sep-Pak cartridges with C18 phase were used. These cartridges contained TDCP and it was not possible to eliminate this background entirely. The NCIMS detection sensitivity for TDCP was better when analysing plasma extracts than when analysing pure standard solutions. Thus quantitative determinations of TDCP must be made by standard additions to plasma extracts. Something in the blood plasma seems to be able to bind or immobilise a certain amount of TDCP. Therefore it was not possible to analyse amounts less than 600 pg/ml whole blood with this method. None of the 37 analysed blood samples exceeded this value.     

Thermolytic properties of 3-(2-pyridyl)-1-propyl and 2-[N-methyl-N-(2-pyridyl)]aminoethyl phosphate/thiophosphate protecting groups in solid-phase synthesis of oligodeoxyribonucleotides

Thermolytic groups may serve as alternatives to the conventional 2-cyanoethyl group for phosphate/thiophosphate protection in solid-phase oligonucleotide synthesis to prevent DNA alkylation by acrylonitrile generated under the basic conditions used for oligonucleotide deprotection. Additionally, thermolytic groups are attractive in the context of engineering a "heat-driven" process for the synthesis of oligonucleotides on diagnostic microarrays. In these regards, the potential application of pyridine derivatives as thermolytic phosphate/thiophosphate protecting groups has been investigated. Specifically, 2-pyridinepropanol and 2-[N-methyl-N-(2-pyridyl)]aminoethanol were incorporated into deoxyribonucleoside phosphoramidites 7a-d and 9, which were found as efficient as 2-cyanoethyl deoxyribonucleoside phosphoramidites in solid-phase oligonucleotide synthesis. Whereas the removal of 3-(2-pyridyl)-1-propyl phosphate/thiophosphate protecting groups from oligonucleotides is effected within 30 min upon heating at 55 degrees C in concentrated NH4OH or in an aqueous buffer at pH 7.0, cleavage of 2-[N-methyl-N-(2-pyridyl)]aminoethyl groups occurs spontaneously when their phosphate or phosphorothioate esters are formed during oligonucleotide synthesis. The deprotection of these groups follows a cyclodeesterification process generating the bicyclic salts 13 and 14 as side products. These salts do not alkylate or otherwise modify any DNA nucleobases and do not desulfurize a phosphorothioate diester model under conditions mimicking large-scale oligonucleotide deprotection.     

Poly(styrene-co-p-(hexafluoro-2-hydroxy-2-propyl)-styrene) blends with syndiotactic and/or isotactic poly(methyl methacrylate)

A modified polystyrene, poly(styrene-co-p-(hexafluoro-2-hydroxy-2-propyl)styrene) (FPS), was blended with syndiotactic and/or isotactic poly(methyl methacrylate) (PMMA) in toluene. Blends were prepared under different conditions to control the self-aggregation of the PMMA segments. The formation of hydrogen bonding and the attendant changes in the aggregation or crystallization of PMMA segments were determined in the solid state by means of FTIR and DSC. The results indicate that for the binary blends, the aggregation of PMMA segments is diminished by hydrogen bonding interaction with either s-PMMA or i-PMMA, and that the interaction is stronger with the s-PMMA blends. For the ternary blends, FPS/s-PMMA/i-PMMA, the preference for stereocomplexation in the system with hydrogen bonding may be attributed to the “kink-nucleated” mechanism, which needs relatively short chain lengths of PMMA segments. Regardless of the order of addition of the components, the formation of crystalline stereocomplexes of s- and i-PMMA could be readily detected. Therefore, the miscibility of the polymer blends is dependent on the competition between the self-aggregation of the s- or i-PMMA segments, stereocomplexation and the hydrogen bonding interaction of PMMA segments with FPS.     

Designing a family of luminescent hybrid materials by 3-(triethoxysilyl)-propyl isocyanate grafted 2-hydroxynicotinic acid bridge molecules

The study concentrates on the syntheses of modified 2-hydroxynicotinic acid by 3-(triethoxysilyl)-propyl isocyanate (TESPIC) and the preparation of their corresponding organic-inorganic molecular-based hybrid material with the two components equipped with covalent bonds. The bridging unit is a derivative of 2-hydroxynicotinic acid which is utilized to coordinate to Tb³⁺, Eu³⁺ or Zn²⁺ and further occurred hydrolysis and polycondensation processes by functional triethoxysilyl groups. Ultraviolet absorption, phosphorescence spectra, and luminescence spectra were applied to characterize the photophysical properties of the obtained hybrid material and the above spectroscopic data present that the triplet energy of modified 2-hydroxynicotinic acid efficiently initiates the antenna effect and matches with the emissive energy level of metal ions. As a result, the intramolecular energy transfer process completed within these molecular-based hybrids and strong green or red emissions of Ln³⁺ have been obtained.     

Polymerization of phenylacetylene by novel Rh (I)-, Ir (I)- and Ru (IV) 1,3-R2-3,4,5,6-tetrahydropyrimidin-2-ylidenes (R = mesityl, 2-propyl): Influence of structure on activity and polymer structure

The preparation of novel Rh (I) and Ir (I) complexes, i.e. [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[PF₆]⁻ (1), Rh(CF₃SO₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (2) and Ir(CF₃CO₂)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (3) (COD = 1,5-cyclooctadiene), is described. Compounds 1 and 3 were structurally characterized by X-ray diffraction. In 1, the N-heterocyclic carbene acts as a bidentate ligand with the carbene coordinating to the Rh(I) center and an arene group acting as a homoazallyl ligand. The catalytic activity of complexes 1–3 in the polymerization of phenylacetylene was studied and compared to that of RhCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (4), Rh(CF₃COO)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (5), [Rh(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD)]⁺[BF₄]⁻ (6), IrCl(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (7), IrCl(1,3-diisopropyl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(COD) (8), IrBr(1,3-di-2-propylimidazolin-2-ylidene)(COD) (9), RuCl₂(PCy₃)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH–C₆H₅) (10), RuCl₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (11), Ru(CO₂CF₃)₂(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(CH-2-(2-PrO)-5-NO₂-C₆H₃) (12). Compounds 1–6 were active in the polymerization of phenylacetylene. cis-Poly(phenylacetylene) (PPA) was obtained with the rhodium-based catalysts 1, 2, 4–6, trans-PPA was obtained with the Ir-based catalysts 3 and 8. In addition, compounds 1 and 6 were found to produce highly stereoregular PPA with a cis-content of 100% in the presence of water. Finally, the Ru-based metathesis initiator 12 allowed for the synthesis of trans-PPA, representing the first example of a ruthenium complex being active in the polymerization of a terminal alkyne.