Electrochemical impedance study of hydrogen evolution on Bi(001) electrode in the HClO4 aqueous solutions

Electrochemical impedance spectroscopy has been applied for investigation of the hydrogen evolution kinetics at the electrochemically polished Bi(001) plane, and the complicated reaction mechanism (slow adsorption and charge-transfer steps) has been established. The charge-transfer resistance and adsorption capacitance values depend noticeably on the electrode potential applied. The adsorption resistance is maximal in the region of electrode potential E _min = −0.65 V vs. (Hg|Hg₂Cl₂|4 M KCl), where the minimal values of constant phase element (CPE) coefficient Q have been calculated. The fractional exponent α _CPE values of the CPE close to unity (α _CPE ≥ 0.94 and weakly dependent on the electrode potential and pH of solution () have been obtained, indicating the weak deviation of Bi(001)|HClO₄ + H₂O interface from the ideally flat capacitive electrode. Q differs only very slightly from double-layer capacitance C _dl values in the whole region of potentials and , investigated.     

Solvent extraction of microamounts of cesium into nitrobenzene using ammonium and thallium dicarbollylcobaltates in the presence of 2,3-naphtho-15-crown-5

Extraction of microamounts of cesium by a nitrobenzene solution of ammonium dicarbollylcobaltate ( \textNH ₄ ⁺ \textB ^- ) ( {{\text{NH}}_{ 4}^{ + } {\text{B}}^{ - } }) and thallium dicarbollylcobaltate ( \textTl ⁺ \textB ^- ) ( {{\text{Tl}}^{ + } {\text{B}}^{ - } }) in the presence of 2,3-naphtho-15-crown-5 (N15C5, L) has been investigated. The equilibrium data have been explained assuming that the complexes \textML ⁺ {\text{ML}}^{ + } and \textML ₂ ⁺ {\text{ML}}_{ 2}^{ + } ( \textM ⁺ = \textNH₄ ⁺ ,\textTl ⁺ ,\textCs ⁺ ) ( {{\text{M}}^{ + } = {\text{NH}}_{4}^{ + } ,{\text{Tl}}^{ + } ,{\text{Cs}}^{ + } } ) are present in the organic phase. The stability constants of the \textML ⁺ {\text{ML}}^{ + } and \textML₂ ⁺ {\text{ML}}_{2}^{ + } species ( \textM ⁺ = \textNH₄ ⁺ ,\textTl ⁺ ) ( {{\text{M}}^{ + } = {\text{NH}}_{4}^{ + } ,{\text{Tl}}^{ + } }) in nitrobenzene saturated with water have been determined. It was found that the stability of the complex cations \textML ⁺ {\text{ML}}^{ + } and \textML₂ ⁺ {\text{ML}}_{2}^{ + } (\textM ⁺ = \textNH₄ ⁺ ,\textTl ⁺ ,\textCs ⁺ ;  \textL = \textN15\textC5) ({{\text{M}}^{ + } = {\text{NH}}_{4}^{ + } ,{\text{Tl}}^{ + } ,{\text{Cs}}^{ + } ;\;{\text{L}} = {\text{N}}15{\text{C}}5}) in the mentioned medium increases in the \textCs ⁺   <  \textNH₄ ⁺   <  \textTl ⁺ {\text{Cs}}^{ + }\,<\, {\text{NH}}_{4}^{ + }\,<\,{\text{Tl}}^{ + } order.     

On the charge storage mechanism at RuO<Subscript>2</Subscript>/0.5 M H<Subscript>2</Subscript>SO<Subscript>4</Subscript> interface

Comparative study of capacitative properties of RuO₂/0.5 M H₂SO₄ and Ru/0.5 M H₂SO₄ interfaces has been performed with a view to find out the nature of electrochemical processes involved in the charge storage mechanism of ruthenium (IV) oxide. The methods of cyclic voltammetry and scanning electron microscopy (SEM) were employed for the investigation of electrochemical behavior and surface morphology of RuO₂ electrodes. It has been suggested that supercapacitor behavior of RuO₂ phase in the potential E range between 0.4 and 1.4 V vs reference hydrogen electrode (RHE) should be attributed to double-layer-type capacitance, related to non-faradaic highly reversible process of ionic pair formation and annihilation at RuO₂/electrolyte interface as described by following summary equation:

Synergistic extraction of some univalent cations into nitrobenzene by using sodium dicarbollylcobaltate and hexaethyl <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylcalix[6]arene hexaacetate

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + NaL⁺ (nb) ⇔ ML⁺ (nb) + Na⁺ (aq) taking place in the two-phase water–nitrobenzene system (M⁺ = H₃O⁺, \textNH₄⁺ {\text{NH}}_{4}{}^{+} , Ag⁺, Tl⁺; L = hexaethyl p-tert-butylcalix[6]arene hexaacetate; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Furthermore, the stability constants of the ML⁺ complexes in nitrobenzene saturated with water were calculated; they were found to increase in the following order: \textAg ⁺   <  NH₄ ⁺   <  \textH ₃ \textO ⁺   <  \textNa ⁺   <  \textTl ⁺ . {\text{Ag}}^{ + } \, < \,\hbox{NH}_{4}{}^{ + } \, < \,{\text{H}}_{ 3} {\text{O}}^{ + } \, < \,{\text{Na}}^{ + } \, < \,{\text{Tl}}^{ + }.     

Extraction of some univalent cations into phenyltrifluoromethyl sulfone by using sodium dicarbollylcobaltate in the presence of benzo-18-crown-6

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + 1·Na⁺ (org) $ \Leftrightarrow $ 1·M⁺ (org) + Na⁺ (aq) taking place in the two-phase water–phenyltrifluoromethyl sulfone (abbrev. FS 13) system (M⁺ = Li⁺, H₃O⁺, NH₄ ⁺, Ag⁺, Tl⁺, K⁺, Rb⁺, Cs⁺; 1 = benzo-18-crown-6; aq = aqueous phase, org = FS 13 phase) were evaluated. Further, the stability constants of the 1·M⁺ complexes in FS 13 saturated with water were calculated; they were found to increase in the series of $ {\text{Cs}}^{ + } \, < \,{\text{Rb}}^{ + } \, < \,{\text{H}}_{ 3} {\text{O}}^{ + } \, < \,{\text{Ag}}^{ + } \, < \,{\text{Li}}^{ + } \, < \,{\text{NH}}_{4}^{ + } \, < \,{\text{K}}^{ + } \, < \,{\text{Tl}}^{ + } $ .     

Kinetics and mechanism of oxidation of hydroxylamine by tetrachloroaurate(III) ion

The oxidation of H₂NOH is first-order both in [NH₃OH⁺] and [AuCl₄ ^–]. The rate is increased by the increase in [Cl^–] and decreased with increase in [H⁺]. The stoichiometry ratio, [NH₃OH⁺]/[AuCl₄ ^–], is 1. The mechanism consists of the following reactions.

Kinetics and mechanism of Am(III) extraction with TODGA

In the present paper, N,N,N’,N’-tetraoctyl diglycolamide (TODGA) as the extractant and n-dodecane as the diluent, the extraction kinetics behavior of Am(III) in TODGA/n-dodecane–HNO₃ system were studied, including stirring speed, the interfacial area, extractant concentration in n-dodecane, extracted ions concentration, acidity of aqueous phase and temperature. The results show that: the extraction process is controlled by diffusion mode under 130 rpm of stirring speed and by chemical reaction mode above 150 rpm. The extraction rate equation and the apparent extraction rate constant of Am(III) by TODGA/n-dodecane in 170 rpm and at 25 °C are followed as: $$ \begin{aligned} r_{0} = \left. {\frac{{{\text{d}}[{\text{M}}]_{{{\text{org}} .}} }}{{{\text{d}}{{t}}}}} \right|_{t = 0} & = k\,\frac{S}{V}\left[ {\text{Am}} \right]_{{{\text{aq}} . ,0}}^{0.94} \left[ {{\text{HNO}}_{3} } \right]_{{{\text{aq}} . ,0}}^{1.05} \left[ {\text{TODGA}} \right]_{{{\text{org}} . ,0}}^{1.19} \\ & \quad k = \left( {24.17 \pm 3.43} \right) \times 10^{ - 3} \,{\text{mol}}^{ - 2.18} \,L^{2.18} \,{ \hbox{min} }^{ - 1} \,{\text{cm}},\;E_{\text{a}} \left( {{\text{Am}}\left( {\text{III}} \right)} \right) = 25.94 \pm 0.98\;{\text{kJ/mol}} .\\ \end{aligned} $$      

Oxidation of 3-(4-methoxyphenoxy)-1,2-propanediol by bis(hydrogen periodato)argentate(III) complex anion: a kinetic study

Oxidation of 3-(4-methoxyphenoxy)-1,2-propanediol (MPPD) by bis(hydrogenperiodato) argentate(III) complex anion, [Ag(HIO₆)₂]⁵⁻ has been studied in aqueous alkaline medium by use of conventional spectrophotometry. The major oxidation product of MPPD has been identified as 3-(4-methoxyphenoxy)-2-ketone-1-propanol by mass spectrometry. The reaction shows overall second-order kinetics, being first-order in both [Ag(III)] and [MPPD]. The effects of [OH⁻] and periodate concentration on the observed second-order rate constants k′ have been analyzed, and accordingly an empirical expression has been deduced:

Iodine Hydrolysis Equilibrium

The equilibrium constant for the hydrolytic disproportionation of I₂

Nickel surface anodic oxidation and electrocatalysis of oxygen evolution

The processes of nickel surface anodic oxidation taking place within the range of potentials preceding oxygen evolution reaction (OER) in the solutions of 1 M KOH, 0.5 M K₂SO₄, and 0.5 M H₂SO₄ have been analyzed in the present paper. Metallic nickel, thermally oxidized nickel, and black nickel coating were used as Ni electrodes. The methods of cyclic voltammetry and X-ray photoelectron spectroscopy were employed. The study was undertaken with a view to find the evidence of peroxide-type nickel surface compounds formation in the course of OER on the Ni electrode surface. On the basis of experimental results and literature data, it has been suggested that in alkaline solution at E ≈ 1.5 V (RHE) reversible electrochemical formation of Ni(IV) peroxide takes place according to the reaction as follows: This reaction accounts for both the underpotential (with respect to ) formation of O₂ from NiOO₂ peroxide and also small experimental values of dE/dlgi slope (<60 mV) at low anodic current densities, which are characteristic for the two-electron transfer process. It has been inferred that the composition of the γ-NiOOH phase, indicated in the Bode and revised Pourbaix diagrams, should be ∼5/6 NiOOH + ∼1/6 NiOO₂. The schemes demonstrating potential-dependent transitions between Ni surface oxygen compounds are presented, and the electrocatalytic mechanisms of OER in alkaline, acid, and neutral medium have been proposed.     

Thermal investigations of SmFeTeO6 and SmCrTeO6 compounds

SmFeTeO₆ and SmCrTeO₆ were synthesized by heating the respective oxides in molar quantities and characterized by X-ray technique. Thermogravimetric studies suggested that SmFeTeO₆ and SmCrTeO₆ vapourize incongruently according to the reactions: $$ \begin{aligned} {\text{SmFeTeO}}_{ 6}{({\text{s}})} & \to {\text{SmFeO}}_{ 3} {( {\text{s}})} + {\text{TeO}}_{ 2} {( {\text{g}})} + \left( { 1/ 2} \right){\text{O}}_{ 2}{( {\text{g}})} \\ {\text{SmCrTeO}}_{ 6} {( {\text{s}})} & \to {\text{SmCrO}}_{ 3} {( {\text{s}})} + {\text{TeO}}_{ 2}{( {\text{g}})} + \left( { 1/ 2} \right){\text{O}}_{ 2}{( {\text{g}})}. \\ \end{aligned} $$ X-ray diffraction data of both the compounds have been indexed on the hexagonal system. Partial pressures of TeO₂(g) were measured over SmFeO₃(s) and SmCrO₃(s) by employing the Knudsen effusion mass loss technique. The standard Gibbs free energy of formation of (Δ_f G°) SmFeTeO₆(s) and SmCrTeO₆(s) were obtained from partial pressures and represented by the following relations: $$\Updelta_{\text{f}} G^{\circ} \left( {{\text{SmFeTeO}}_{6}{( {{\text{s}},\,T})}} \right) \pm 2 5\,{\text{kJ}}\,{\text{mol}}^{ - 1} = - 1 5 1. 6 5+ 0. 1 5\left(T \right)\quad \left( 1 ,0 90{-} 1,1 80\,{\text{K}} \right) \\ \Updelta_{\text{f}} G^{\circ } \left( {{\text{SmCrTeO}}_{ 6} {( {{\text{s}},\,T})}} \right) \pm 2 5\,{\text{kJ}}\,{\text{mole}}^{ - 1} = - 2 5 2. 8 6+ 0. 1 2(T)\quad \left( { 1,100 {-} 1 , 1 7 5\,{\text{K}}} \right).$$      

Studies on electron transfer reactions: reduction of heteropoly 10-tungstodivanadophosphate by <Emphasis Type="SmallCaps">l</Emphasis>-cysteine in aqueous acid medium

l-cysteine undergoes facile electron transfer with heteropoly 10-tungstodivanadophosphate, [ \textPV^\textV \textV^\textV \textW _{1 0} \textO _{4 0} ]^{5 -} , \left[ {{\text{PV}}^{\text{V}} {\text{V}}^{\text{V}} {\text{W}}_{ 1 0} {\text{O}}_{ 4 0} } \right]^{5 - } , at ambient temperature in aqueous acid medium. The stoichiometric ratio of [cysteine]/[oxidant] is 2.0. The products of the reaction are cystine and two electron-reduced heteropoly blue, [PV^IVV^IVW₁₀O₄₀]⁷⁻. The rates of the electron transfer reaction were measured spectrophotometrically in acetate–acetic acid buffers at 25 °C. The orders of the reaction with respect to both [cysteine] and [oxidant] are unity, and the reaction exhibits simple second-order kinetics at constant pH. The pH-rate profile indicates the participation of deprotonated cysteine in the reaction. The reaction proceeds through an outer-sphere mechanism. For the dianion ⁻SCH₂CH(NH₃ ⁺)COO⁻, the rate constant for the cross electron transfer reaction is 96 M⁻¹s⁻¹ at 25 °C. The self-exchange rate constant for the ^- \textSCH₂ \textCH( \textNH₃ ⁺ )\textCOO ^- \mathord

Dissociation Constants for Citric Acid in NaCl and KCl Solutions and their Mixtures at 25 °C

The constants for the dissociation of citric acid (H₃C) have been determined from potentiometric titrations in aqueous NaCl and KCl solutions and their mixtures as a function of ionic strength (0.05–4.5 mol-dm^–3) at 25 °C. The stoichiometric dissociation constants (K_i^*)

Determination of thermodynamic properties of YRhO3(s) by solid-state electrochemical cell and differential scanning calorimeter

The standard molar Gibbs free energy of formation of YRhO₃(s) has been determined using a solid-state electrochemical cell wherein calcia-stabilized zirconia was used as an electrolyte. The cell can be represented by: ( - )\textPt - Rh/{ \textY₂\textO_\text3( \texts ) + \textYRh\textO₃( \texts ) + \textRh( \texts ) }//\textCSZ//\textO₂( p( \textO₂ ) = 21.21  \textkPa )/\textPt - Rh( + ) \left( - \right){\text{Pt - Rh/}}\left\{ {{{\text{Y}}_2}{{\text{O}}_{\text{3}}}\left( {\text{s}} \right) + {\text{YRh}}{{\text{O}}_3}\left( {\text{s}} \right) + {\text{Rh}}\left( {\text{s}} \right)} \right\}//{\text{CSZ//}}{{\text{O}}_2}\left( {p\left( {{{\text{O}}_2}} \right) = 21.21\;{\text{kPa}}} \right)/{\text{Pt - Rh}}\left( + \right) . The electromotive force was measured in the temperature range from 920.0 to 1,197.3 K. The standard molar Gibbs energy of the formation of YRhO₃(s) from elements in their standard state using this electrochemical cell has been calculated and can be represented by: D_\textfG^\texto{ \textYRh\textO₃( \texts ) }/\textkJ  \textmo\textl ^{- 1}( ±1.61 ) = - 1,147.4 + 0.2815  T  ( \textK ) {\Delta_{\text{f}}}{G^{\text{o}}}\left\{ {{\text{YRh}}{{\text{O}}_3}\left( {\text{s}} \right)} \right\}/{\text{kJ}}\;{\text{mo}}{{\text{l}}^{ - 1}}\left( {\pm 1.61} \right) = - 1,147.4 + 0.2815\;T\;\left( {\text{K}} \right) . Standard molar heat capacity C^o_p,m C^{o}_{{p,m}} (T) of YRhO₃(s) was measured using a heat flux-type differential scanning calorimeter in two different temperature ranges from 127 to 299 K and 305 to 646 K. The heat capacity in the higher temperature range was fitted into a polynomial expression and can be represented by: $ {*{20}{c}} {\mathop C\nolimits_{p,m}^{\text{o}} \left( {{\text{YRh}}{{\text{O}}_3},{\text{s,}}T} \right)\left( {{\text{J}}\;{{\text{K}}^{ - 1}}{\text{mo}}{{\text{l}}^{ - 1}}} \right)} & { = 109.838 + 23.318 \times {{10}^{ - 3}}T\left( {\text{K}} \right)} & { - 12.5964 \times {{10}^5}/{T^2}\left( {\text{K}} \right).} \\ {} & {\left( {305 \leqslant T\left( {\text{K}} \right) \leqslant 646} \right)} & {} \\ $ \begin{array}{*{20}{c}} {\mathop C\nolimits_{p,m}^{\text{o}} \left( {{\text{YRh}}{{\text{O}}_3},{\text{s,}}T} \right)\left( {{\text{J}}\;{{\text{K}}^{ - 1}}{\text{mo}}{{\text{l}}^{ - 1}}} \right)} & { = 109.838 + 23.318 \times {{10}^{ - 3}}T\left( {\text{K}} \right)} & { - 12.5964 \times {{10}^5}/{T^2}\left( {\text{K}} \right).} \\ {} & {\left( {305 \leqslant T\left( {\text{K}} \right) \leqslant 646} \right)} & {} \\ \end{array} The heat capacity of YRhO₃(s) was used along with the data obtained from the electrochemical cell to calculate the standard enthalpy and entropy of formation of the compound at 298.15 K.     

Kinetics and mechanism of the oxidation of hydrogen peroxide by the octacyanotungstate(V) ion in alkaline aqueous media

Summary The oxidation of H₂O₂ by [W(CN)₈]^3– has been studied in aqueous media between pH 7.87 and 12.10 using both conventional and stopped-flow spectrophotometry. The reaction proceeds without generation of free radicals. The experimental overall rate law, , strongly suggests two types of mechanisms. The first pathway, characterized by the pH-dependent rate constant k _s, given by , involves the formation of [W(CN)₈· H₂O₂]^3–, [W(CN)₈· H₂O₂·W(CN)₈]^6– and [W(CN)₈· HO]^3– intermediates in rapid pre-equilibria steps, and is followed by a one-electron transfer step involving [W(CN)₈·HO]^3– (k _a) and its conjugate base [W(CN)₈·O]^4– (k _b). At 25 °C, I = 0.20 m (NaCl), the rate constant with H _a =40±6kJmol^–1 and S _a =–151±22JK^–1mol^–1; the rate constant with H _b =36±1kJmol^–1 and S _b =–136±2JK^–1mol^–1 at 25 °C, I = 0.20 m (NaCl); the acid dissociation constant of [W(CN)₈·HO]^3–, K ₅ =(5.9±1.7)×10^–10 m, with and is the first acid dissociation constant of H₂O₂. The second pathway, with rate constant, k _f, involves the formation of [W(CN)₈· HO₂]^4– and is followed by a formal two-electron redox process with [W(CN)₈]^3–. The pH-dependent rate constant, k _f, is given by . The rate constant k ₇ =23±6m ^–1 s ^–1 with and at 25°C, I = 0.20 m (NaCl).     

Inner-sphere oxidation of a ternary dipicolinatochromium(III) complex involving a malonic acid co-ligand

The oxidation of a ternary complex of chromium(III), [Cr^III(DPA)(Mal)(H₂O)₂]^?, involving dipicolinic acid (DPA) as primary ligand and malonic acid (Mal) as co-ligand, was investigated in aqueous acidic medium. The periodate oxidation kinetics of [Cr^III(DPA)(Mal)(H₂O)₂]^? to give Cr(VI) under pseudo-first-order conditions were studied at various pH, ionic strength and temperature values. The kinetic equation was found to be as follows: \( {\text{Rate}} = {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} \mathord{\left/ {\vphantom {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}}} \right. \kern-0pt} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}} \) where k ₆ (3.65 × 10^?3 s^?1) represents the electron transfer reaction rate constant and K ₄ (4.60 × 10^?4 mol dm^?3) represents the dissociation constant for the reaction \( \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)_{2} } \right]^{ - } \rightleftharpoons \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)\left( {\text{OH}} \right)} \right]^{2 - } + {\text{H}}^{ + } \) and K ₅ (1.87 mol^?1 dm³) and K ₆ (22.83 mol^?1 dm³) represent the pre-equilibrium formation constants at 30 °C and I = 0.2 mol dm^?3. Hexadecyltrimethylammonium bromide (CTAB) was found to enhance the reaction rate, whereas sodium dodecyl sulfate (SDS) had no effect. The thermodynamic activation parameters were estimated, and the oxidation is proposed to proceed via an inner-sphere mechanism involving the coordination of IO₄ ^? to Cr(III).     

Crystal structure and thermochemical properties of bis(1-octylammonium) tetrachlorocuprate

Bis(1-octylammonium) tetrachlorocuprate (1-C₈H₁₇NH₃)₂CuCl₄(s) was synthesized by the method of liquid phase reaction. The crystal structure of the compound has been determined by X-ray crystallography. The lattice potential energy was obtained from the crystallographic data. Molar enthalpies of dissolution of (1-C₈H₁₇NH₃)₂CuCl₄(s) at various molalities were measured at 298.15?K in the double-distilled water by means of an isoperibol solution-reaction calorimeter, respectively. In terms of Pitzer??s electrolyte solution theory, the molar enthalpy of dissolution of (1-C₈H₁₇NH₃)₂CuCl₄(s) at infinite dilution was determined to be $ \Updelta_{\rm s} H_{\text{m}}^{\infty } = \, - 5. 9 7 2\,{\text{kJ}}\,{\text{mol}}^{ - 1} , $ and the sums of Pitzer??s parameters $ (4\beta_{{{\text{C}}_{ 8} {\text{H}}_{ 1 7} {\text{NH}}_{ 3} , {\text{Cl}}}}^{ ( 0 )L} + 2\beta_{\text{Cu,Cl}}^{ ( 0 )L} + \theta_{{{\text{C}}_{ 8} {\text{H}}_{ 1 7} {\text{NH}}_{ 3} , {\text{Cu}}}}^{L} ) $ and $ (2\beta_{{{\text{C}}_{ 8} {\text{H}}_{ 1 7} {\text{NH}}_{ 3} , {\text{Cl}}}}^{ ( 1 )L} + \beta_{\text{Cu,Cl}}^{ ( 1 )L} ) $ were obtained.     

Mechanism of the catalyzed by cysteine electroreduction of the insoluble in water cobalt(II) salt as a component of carbon paste electrode

The mechanism of the Co(II) catalytic electroreduction of water insoluble CoR₂ salt in the presence of cysteine was developed. CoR₂ = cobalt(II) cyclohexylbutyrate is the component of a carbon paste electrode. Electrode surface consecutive reactions are: (a) fast (equilibrium) reaction of the complex formation, (b) rate-determining reversible reaction of the promoting process of CoR(Ac⁺) complex formation, (c) rate-determining irreversible reaction of the electroactive complex formation with ligand-induced adsorption, and (d) fast irreversible reaction of the electroreduction. Reactions (a,b) connected with CoR₂ dissolution and reactions (c,d) connected with CoR₂ electroreduction are catalyzed by . Regeneration of (reactions “b,d”) and accumulation of atomic Co(0) (reaction “d”) take place. Experimental data [Sugawara et al., Bioelectrochem Bioenergetics 26:469, 1991]: i _a vs E (i _a is anodic peak, E is cathodic accumulation potential), i _a vs , and i _a vs pH have been quantitatively explained.     

Thermochemistry of hydroxymethylphenol isomers

The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline state of the 2-, 3- and 4-hydroxymethylphenols, $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = \, - ( 3 7 7. 7 \pm 1. 4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr) }} = - (383.0 \pm 1.4) \, \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{cr)}} = - (382.7 \pm 1.4)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , respectively, were derived from the standard molar energies of combustion, in oxygen, to yield CO₂(g) and H₂O(l), at T = 298.15 K, measured by static bomb combustion calorimetry. The Knudsen mass-loss effusion technique was used to measure the dependence of the vapour pressure of the solid isomers of hydroxymethylphenol with the temperature, from which the standard molar enthalpies of sublimation were derived using the Clausius–Clapeyron equation. The results were as follows: $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (99.5 \pm 1.5)\,{\text{kJ}}\,{\text{mol}}^{ - 1} $ , $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (116.0 \pm 3.7) \,{\text{kJ}}\,{\text{mol}}^{ - 1} $ and $ \Updelta_{\rm cr}^{\rm g} H_{\rm m}^{\rm o} = (129.3 \pm 4.7)\,{\text{ kJ mol}}^{ - 1} $ , for 2-, 3- and 4-hydroxymethylphenol, respectively. From these values, the standard molar enthalpies of formation of the title compounds in their gaseous phases, at T = 298.15 K, were derived and interpreted in terms of molecular structure. Moreover, using estimated values for the heat capacity differences between the gas and the crystal phases, the standard (p° = 0.1 MPa) molar enthalpies, entropies and Gibbs energies of sublimation, at T = 298.15 K, were derived for the three hydroxymethylphenols.     

High temperature enthalpy increment and thermodynamic functions of U2Ti

This study investigated thermodynamic properties of uranium–titanium alloy to determine its suitability for storage of hydrogen isotopes. The enthalpy increments of U₂Ti were measured using a high temperature inverse drop calorimeter in the temperature range of 299–1,169 K. Temperature dependence of the molar enthalpy increment and molar heat capacity is expressed in the form $ H^\circ_{\text{m}} (T) - H^\circ_{\text{m}} (298.15\,{\text{K}})({\text{J }}\,{\text{mol}}^{ - 1} ) = 23.236(T/{\text{K}}) + 53.292 \times 10^{ - 3} (T/{\text{K}})^{2} - 21.294 \times 10^{5} ({\text{K}}/T) - 4523 $ and $ C^\circ_{\text{p,m}} ({\text{J}}\,{\text{K}}^{ - 1} \,{\text{g}}^{ - 1} ) = 23.236 + 10.6584 \times 10^{ - 2} (T/{\text{K}}) + 21.294 \times 10^{5} ({\text{K}}/T)^{2} (300 \le T/{\text{K}} \le 900) $ , respectively. A set of self consistent thermodynamic functions such as entropy, Gibbs energy function, heat capacity, and Gibbs energy and enthalpy values for U₂Ti have been computed using data obtained in this study and required data from the literature.