Properties of transistor based C60 thin film on polystyrene

This paper reports that the n-type organic thin-fihn transistors have been fabricated by using C60 as the active layer and polystyrene as the dielectric. The properties of insulator and the growth characteristic of C60 film were carefully investigated. By choosing different source/drain electrodes, a device with good performance can be obtained. The highest electron field effect mobility about 1.15 cm2/（V. s） could reach when Barium was introduced as electrodes. Moreover, the C60 transistor shows a negligible ＇hysteresis effect＇ contributed to the hydroxyl-free of insulator. The result suggests that polymer dielectrics are promising in applications among n-type organic transistors.     

Yb掺杂C60薄膜的x射线光电子能谱研究

在超高真空系统中制备了C₆₀的Yb填隙化合物薄膜.用x射线光电子能谱研究了Yb和C₆₀结合过程中C 1s，Yb 4f和Yb 4d的变化.利用Yb 4f和C 1s的谱峰强度确定出相纯样品的化学组分接近Yb_2.75C₆₀，这一结果与晶体x射线衍射结果一致.Yb 4f和Yb 4d的峰形与峰位表明化合物中Yb的价态为Yb²⁺.相纯样品（Yb_2.75C₆₀）的C 关键词： 60的Yb填隙化合物薄膜')" href="#">C₆₀的Yb填隙化合物薄膜 x射线光电子能谱 Yb价态     

A high mobility C60 field-effect transistor with an ultrathin pentacene passivation layer and bathophenanthroline/metal bilayer electrodes

C₆₀ field-effect transistor (OFET) with a mobility as high as 5.17 cm²/V·s is fabricated. In our experiment, an ultrathin pentacene passivation layer on poly-(methyl methacrylate) (PMMA) insulator and a bathophenanthroline (Bphen)/Ag bilayer electrode are prepared. The OFET shows a significant enhancement of electron mobility compared with the corresponding device with a single PMMA insultor and an Ag electrode. By analysing the C₆₀ film with atomic force microscopy and X-ray diffraction techniques, it is shown that the pentacene passivation layer can contribute to C₆₀ film growth with the large grain size and significantly improve crystallinity. Moreover, the Bphen buffer layer can reduce the electron contact barrier from Ag electrodes to C₆₀ film efficiently.     

Low temperature transport study of C60 thin film FETs

Low temperature transport in C₆₀ thin film field-effect transistors has been studied using several samples with various gate voltages. Nearest neighbor hopping and variable range hopping transport have been observed in the low temperature transport measurements. Analyzing the temperature dependence of the transport types, it was found that the electrical properties of the film can be improved by thermally agitated evaporation of C₆₀.     

Laser desorption of NO from a thick C60 film

The desorption of NO molecules from a thick C₆₀ film is reported. A thermal desorption spectrum indicates two adsorption sites with binding energies of E_b = 0.30 eV and 0.55 eV. For laser desorption the fullerene surface is exposed to NO and excited by 7 ns UV laser pulses. Desorbing NO molecules are recorded state selectively as well as time resolved. The time-of-flight measurement indicates three different desorption pathways. A fast channel shows rovibronic temperatures of T_rot(v″ = 0) = 370 K, T_rot(v″ = 1) = 390 K and T_vib = 610 K as well as strong rotational-translational coupling. The desorption yield for the fast channel increases linearly with pulse energy with a desorption cross section of σ = (5.1 ± 0.9) × 10⁻¹⁷ cm². Dominating the signal for small J″ values is a slow channel with low rotational and translational temperatures of about 110 K. We assign this peak to a laser-induced thermal desorption. For large pump-probe delays the data deviate from the Maxwellian flux distribution and a third channel appears with extremely late arrival times.     

Comparative study of optical parameters of fullerene C60 film at different temperatures

Fullerene C₆₀ thin films on glass substrate (around 2000 ? thickness) were prepared by thermal evaporation technique. The structural, surface morphology and optical properties of the films were studied. The optical properties of fullerene C₆₀ were investigated in the spectral range 200 nm to 900 nm using a UV-Vis spectrophotometer at room temperature as well as at liquid nitrogen temperature (77 K). The optical band gap at room temperature is found to be 2.30 eV, which gradually decreases with lowering the temperature and reaches to 2.27 at 77 K. The thickness and refractive index of fullerene C₆₀ film were calculated by ellipsometry. From the X-ray analysis, we have calculated the grain size, dislocation density, number of crystallite per unit area, and strain of the film at room temperature. The surface morphology of film was analyzed by scanning electron microscope (SEM). The present result show that the fullerene C₆₀ film becomes more conducting at low temperature.     

Optical limiting behavior of C60 doped ethylenepropylenediene polymethylene polymer

Optical limiting measurements on C₆₀ in toluene-ethylenepropylenediene polymethylene (EPDM) polymer blends and in EPDM polymer films at three different concentrations have been carried out. The measurements were undertaken using 532 nm wavelength, 10 ns pulses from a frequency-doubled Nd-YAG Laser. The results show that the optical limiting efficiency is concentration dependent and that the limiting efficiency for C₆₀ in toluene-EPDM polymer blends is better than in EPDM polymer film samples.     

Performance improvement in pentacene organic thin film transistors by inserting a C60 ultrathin layer

The contact effect on the performances of organic thin film transistors is studied here. A C₆₀ ultrathin layer is inserted between Al source--drain electrode and pentacene to reduce the contact resistance. By a 3 nm C₆₀ modification, the injection barrier is lowered and the contact resistance is reduced. Thus, the field-effect mobility increases from 0.12 to 0.52 cm²/(V·s). It means that inserting a C₆₀ ultra thin layer is a good method to improve the organic thin film transistor (OTFT) performance. The output curve is simulated by using a charge drift model. Considering the contact effect, the field effect mobility is improved to 1.15 cm²/(V·s). It indicates that further reducing the contact resistance of OTFTs should be carried out.     

Solvent-induced optical properties of C60

Different C₆₀ aggregates, i.e. nanoparticles, clusters of nanoparticles and microcrystals in room-temperature solutions, are reported to account for the colors of fluorescence emissions centered at 440, 575 and 700 nm, respectively. And the configurations of C₆₀ aggregation created in solutions are revealed to be closely associated with the characteristic interactions between C₆₀ and solvent molecules. On this basis, aggregation behaviors and thus induced optical properties of C₆₀ have been tentatively controlled through adopting solvent mixtures.     

Sputtering of amorphous ice induced by C60 and Au3 clusters

Molecular dynamics simulations were performed to study the behavior of cluster SIMS. Two predominant cluster ion beam sources, C₆₀ and Au₃, were chosen for comparison. An amorphous water ice substrate was bombarded with incident energy of 5 keV. The C₆₀ cluster was observed to shatter upon impact creating a crater of damage approximately 8 nm deep. Although Au₃ was also found to both break apart and form a damage crater, it continued along its initial trajectory causing damage roughly 10 nm deep into the sample and becoming completely imbedded. It is suggested that this difference in behavior is due to the large mass of Au relative to the substrate water molecule.     

Dust acoustic wave oscillations in C60 molecule

In this letter, dispersion properties of low-frequency electrostatic waves in a C₆₀ molecule are investigated. It is assumed that C₆₀ molecule is charged due to the field emission, and hence the C₆₀ molecule can be regarded as charged dust spheres surrounded by degenerate electrons and ions. We obtain the dispersion relation for the low-frequency electrostatic oscillations in the C₆₀ molecule by using the quantum hydrodynamic model in conjunction with the Poisson equation.     

Optical limiting action of C60 doped poly(dimethylacetylendicarboxylate)

The optical limiting action of poly(dimethylacetylendicarboxylate) polymer doped with fullerene C₆₀ has been investigated under irradiation with 10 ns laser pulses at 532 nm. The optical limiting measurements were performed at four different dopant concentrations. The threshold limiting fluence at 0.3 J/cm² was observed at high doping concentrations, with transmission of about 55%. An explanation based on the combination of two-photon absorption and reverse saturable absorption was proposed for its nonlinear optical absorption behavior.     

Transport properties and mechanism of C60 coupled to carbon nanotube electrode

By applying non-equilibrium Green's functions in combination with density-functional theory, we investigate electronic transport properties of C₆₀ coupled to carbon nanotubes and Li electrodes. The results show that electronic transport properties of CNT-C₆₀-CNT and Li-C₆₀-Li systems are completely different. Nonlinear I-V characteristic, varistor-type behavior and negative differential resistance (NDR) phenomenon are observed when electrodes are carbon nanotubes. We discuss the mechanism of I-V characteristics of CNT-C₆₀-CNT systems in details. Our results suggest conductance, energy level of Frontier molecular orbitals, energy gap between HOMO and LUMO, the coupling between molecular orbitals and electrodes are all playing critical roles in electronic transport properties.     

Rb掺杂C60单晶的相衍变和电子态

在C₆₀单晶超高真空解理面上制备C₆₀的Rb填隙化合物薄膜.用同步辐射光电子能谱研究了相衍变过程.观察到对应于固溶相、Rb₁C₆₀和Rb₃C₆₀的电子态密度分布.当数纳米厚Rb₃C₆₀薄膜在C₆₀单晶（111）解理面形成后，室温条件下进一步沉积Rb至样品表面不产生fcc到bct或bcc结构相变.C_{60 关键词： 4}C₆₀和Rb₅C₆₀吸附相')" href="#">金属性Rb₄C₆₀和Rb₅C₆₀吸附相 60单晶')" href="#">C₆₀单晶 相衍变 同步辐射光电子能谱     

Stretching the limits of static SIMS with C60

Pristine and Au-covered molecular films have been analyzed by ToF-SIMS (TRIFT™), using 15 keV Ga⁺ (FEI) and 15 keV C₆₀⁺ (Ionoptika) primary ion sources. The use of C₆₀⁺ leads to an enormous yield enhancement for gold clusters, especially when the amount of gold is low (2 nmol/cm²), i.e. a situation of relatively small nanoparticles well separated in space. It also allows us to extend significantly the traditional mass range of static SIMS. Under 15 keV C₆₀⁺ ion bombardment, a series of clusters up to a mass of about 20,000 Da (Au₁₀₀⁻: 19,700 Da) is detected. This large yield increase is attributed to the hydrocarbon matrix (low-atomic mass), because the yield increase observed for thick metallic films (Ag, Au) is much lower. The additional yield enhancement factors provided by the Au metallization procedure for organic ions (MetA-SIMS) have been measured under C₆₀⁺ bombardment. They reach a factor of 2 for the molecular ion and almost an order of magnitude for Irganox fragments such as C₄H₉⁺, C₁₅H₂₃O⁺ and C₁₆H₂₃O⁻.     

Bombardment induced surface chemistry on Si under keV C60 impact

Molecular dynamics simulations of the sputtering of Si by C₆₀ keV bombardment are performed in order to understand the importance of chemical reactions between C atoms from the projectile and Si atoms in the target crystal. The simulations predict the formation of strong covalent bonds between the C and Si atoms, which result in nearly all of the C atoms remaining embedded in the surface after bombardment. At low incident kinetic energies, little sputtering of Si atoms is observed and there is a net deposition of solid material. As the incident kinetic energy is increased, the sputtering yield of Si atoms increases. At 15 keV, the yield of sputtered Si atoms is more than twice the number of C atoms deposited, and there is a net erosion of the solid material.     

Artifacts in the sputtering of inorganics by C60

In the present study, the basic issues in C₆₀ⁿ⁺ sputtering are studied using silicon, gold and platinum samples. Sputtering yields are measured for energies in the range of 5-30 keV, by sputtering micrometre sized craters on the surface of flat clean samples and measuring their volumes using atomic force microscopy (AFM). Net deposition of carbon occurs for all three materials at 5 keV, and is not specific to silicon which forms a carbide. The threshold energy for net sputtering is dependent on the sputtering yield and the stopping power of the substrate. Away from the threshold, the sputtering yields agree well with Sigmund and Claussen's thermal spike model after allowance for the sputtering of the deposited carbon atoms. AFM images show the formation of unusual surface topography around the transition region between sputtering and deposition. Analysis of the bottom of a crater using imaging SIMS shows a significant enhancement of carbon clusters as well as various silicon-carbon groups, indicating the importance of carbon deposition and implantation in a gradual mixed layer formed from sputtering. The thickness of this interface layer is shown to be approximately 5 nm.     

Experimental observation of negative group velocity in C60 PMMA

The authors experimentally observed the superluminal propagation at negative group velocity in C₆₀ polymethyl methacrylate (PMMA) firstly. The largest time advancement of 7.61 ms was obtained at 1 mg/cm³ of sample concentration, the corresponding group velocity was −0.657 m/s. Fast light in C₆₀ PMMA offers several advantages over liquids or vapors for a variety of possible applications: (i) easy for experimental measurement and practical applications (ii) easy for manufacture, (iii) sample concentration is another convenient parameter to vary the signal delay.     

Photon-assisted synthesis of C60 polymers by laser irradiation

The harmonics of a free electron laser (FEL) were irradiated in vacuum to surfaces of compressed C₆₀ and a mixture of C₆₀ and I₂. The power and frequency of the fundamental FEL macro-pulse were ca. 0.5 mJ/pulse and 2 Hz, respectively. The irradiation time was 120-180 min. After irradiation of FEL with a typical wavelength of 450 or 345 nm, the Raman peak of Ag(2)-derived vibration mode of C₆₀ shifted to the lower-energy side. The Raman peak shift of the mixture powder sample was greater than that of pure C₆₀. Furthermore, changes of the crystalline structure indicated that various intermolecular combinations occurred by irradiation. These results strongly suggest that three-dimensional polymerization of C₆₀ was promoted by laser irradiation and the effect of photon-assisted hole-doping from iodine atoms to C₆₀ molecules.     

Polyethylene terephthalate (PET) bulk film analysis using C60, Au3, and Au primary ion beams

The damage characteristics of polyethylene terephthalate (PET) have been studied under bombardment by C₆₀⁺, Au₃⁺ and Au⁺ primary ions. The observed damage cross-sections for the three ion beams are not dramatically different. The secondary ion yields however were significantly enhanced by the polyatomic primary ions where the secondary ion yield of the [M + H]⁺ is on average 5× higher for C₆₀⁺ than Au₃⁺ and 8× higher for Au₃⁺ than Au⁺. Damage accumulates under Au⁺ and Au₃⁺ bombardment while C₆₀⁺ bombardment shows a lack of damage accumulation throughout the depth profile of the PET thick film up to an ion dose of ∼1 × 10¹⁵ ions cm⁻². These properties of C₆₀⁺ bombardment suggest that the primary ion will be a useful molecular depth profiling tool.