氧化铁磁性纳米粒子的制备、表面修饰及在分离和分析中的应用

氧化铁磁性纳米粒子通过表面化学修饰得到无机、有机或聚合物壳包覆在其表面。其中的壳结构既具有生物适应性,又具有可键合生物分子如细胞、蛋白质、酶、抗体和核酸的活性基团,而核具有磁性特性。本文总结了氧化铁磁性纳米粒子的制备方法,介绍了其表面化学修饰及在分离和分析应用的最新进展。     

基于DNA酶/AuNPs-GO传感器方波伏安法高灵敏检测Pb2+

制备了金纳米粒子-氧化石墨烯(AuNPs-GO)复合物,采用透射电镜(TEM)和紫外-可见吸收光谱(UV-Vis)对其进行了表征.将此复合物修饰到玻碳电极(GCE)表面,再通过Au—S键将巯基修饰的富含鸟嘌呤的DNA链(T30695)自组装到电极表面的金纳米粒子上.T30695可与Pb2+结合形成稳定的平行G-四链体,...     

层层自组装修饰磁性纳米粒子及蛋白质吸附研究

采用层层自组装技术将聚天冬胺酸和聚乙二胺修饰到磁性纳米粒子表面上, 并研究了修饰后的磁性纳米粒子的zeta电势变化和对蛋白质的吸附. 先通过化学共沉淀的方法获得了四氧化三铁磁性纳米粒子, 然后利用层层自组装的方法对纳米粒子进行了修饰. 用TEM表征了纳米粒子的尺寸. 用红外光谱表征了修饰过程中磁性纳米粒子表面组成的变化情况. 研究了修饰过程对磁性纳米粒子的zeta电势的影响. zeta电势的正负和大小与表面连接的分子的带电性质有关. 磁性纳米粒子的等电点接近中性. 聚天冬胺酸修饰的磁性纳米粒子的Zeta电势为负值. 在聚乙二胺溶液的pH＝11时获得的双层修饰的磁性粒子的等电点接近9, 并且等电点随聚乙二胺溶液的pH的减小而减小. 结果也表明在pH＝7.4时具有不同表面电荷的磁性纳米粒子通过静电作用选择性地吸附蛋白质.     

电纺Pd纳米粒子/碳纳米纤维复合材料对甲醇的电催化氧化研究

利用静电纺丝技术制备了含有乙酰丙酮钯(Pd(Ac)2)前体的聚丙烯腈(PAN)纳米纤维,经H2还原和900℃碳化处理得到了Pd纳米粒子负载的碳纳米纤维复合材料(Pd/CNF).此方法中,CNF的制备和Pd纳米粒子的形成是同步进行的,无需对碳载体进行任何预处理,实现了纳米粒子负载CNF的一步制备,简化了实验步骤的同时确保CNF载体骨架的完整性.扫描电镜(SEM)和透射电镜(TEM)分析表明,大小均一的Pd纳米粒子牢固地分散在CNF表面,其粒径约为60 nm.X-射线衍射(XRD)和X-射线光电子能谱(XPS)表征了Pd/CNF的晶体结构.Pd纳米粒子以单质态形式存在,具有面心立方体结构.通过循环伏安法(CV)和计时电流法等电化学方法研究了Pd/CNF复合材料对甲醇的电催化氧化情况,Pd/CNF对甲醇氧化显示出优异的催化活性和稳定性,优于商业化Pd/C催化剂.     

Fe3O4表面原位引发可控/“活性”聚合制备磁性聚苯乙烯纳米粒子

采用化学共沉淀方法合成了Fe3O4纳米粒子, 用3-甲基丙烯酰氧基丙基三甲氧基硅烷(3-MPS)对其进行表面接枝修饰, 然后以苯乙烯(St)为单体, 过氧化苯甲酰(BPO)为引发剂, 4-羟基-2,2,6,6-四甲基哌啶-1-氧化物自由基(HTEMPO·)为稳定自由基介质, 采用可控/“活性”自由基聚合技术在修饰后的Fe3O4纳米粒子表面原位引发聚合, 制备了粒径小、分布窄、磁含量高的磁性聚苯乙烯（PS）纳米粒子. X射线衍射(XRD)研究表明, 所合成的Fe3O4粒子为尖晶石结构. 凝胶渗透色谱(GPC)分析表明, 聚苯乙烯的分子量与反应时间呈较好的线性关系. 透射电镜(TEM)观察表明, 所制备的磁性聚苯乙烯纳米粒子的粒径在20-30 nm之间. 热重(TG)分析得到磁性聚苯乙烯纳米粒子的磁含量为62.6%. 振动样品磁强计(VSM)测试结果表明, 磁性聚苯乙烯纳米粒子的比饱和磁化强度为31.7 emu·g-1, 呈现单磁畴结构.     

氧化铁磁性纳米粒子固定化酶*

纳米粒子作为酶固定化的载体,当其具有磁性时,制备的固定化酶易于从反应体系中分离和回收,操作简便;并且利用外部磁场可以控制磁性材料固定化酶的运动方式和方向,替代传统的机械搅拌方式,提高固定化酶的催化效率。在众多纳米材料中,氧化铁因其在磁性、催化等多方面的良好特性而倍受瞩目。本文对近年来各种氧化铁磁性纳米粒子固定化酶,尤其是固定化脂肪酶和蛋白酶的制备方法及其应用做了较为详细的阐述,对这些氧化铁磁性纳米粒子固定化酶的优缺点和发展前景进行了讨论。     

聚丙烯腈纳米纤维载银复合膜绿色制备及其催化性能

采用静电纺丝技术和化学镀方法相结合的方法,用聚丙烯腈(PAN)纳米纤维作为载体,以绿色环保的胺化改性替代化学镀传统的敏化、活化前处理,再化学镀银制备胺化聚丙烯腈纳米纤维载银复合膜(Ag/APAN).SEM、XPS、XRD、FTIR等结果表明,银离子能够吸附在经胺化处理后的PAN纳米纤维表面,且能够在纤维表面生成少量单质银;单质银作为催化活性中心,有效地促进化学镀银的进行,在PAN纳米纤维表面生成均匀致密的银纳米粒子层,制备出了以PAN纳米纤维为核,银层为壳的核壳结构复合膜.银纳米粒子附着在纳米纤维表面,可以使银纳米粒子的催化性能得到充分发挥.通过对催化邻-硝基苯胺与硼氢化钠之间氧化还原反应的研究表明,所制备的Ag/APAN纳米纤维复合膜具有很好的催化效果,且不会造成反应体系的二次污染.     

Au@Pt纳米粒子单层膜对甲醇氧化的电催化性能及SERS研究

通过种子生长法合成Au@Pt核壳结构纳米粒子,采用两相成膜法制备单层粒子膜,并转移获得Au@Pt核壳纳米粒子单层膜电极,该电极表面纳米粒子分布均匀,具有较大的比表面,对甲醇的氧化具有较好的电催化活性.研究表明,利用内核Au的长程电磁场增强效应,该单层膜表现出均匀且优良的表面增强拉曼散射(SERS)活性,适合作为基底在分子水平上研究表面的吸附和反应.获得了Au@Pt核壳纳米粒子单层膜表面甲醇电催化氧化过程的SERS光谱,为深入分析表面反应机理提供了实验依据.     

AuPd合金纳米粒子的电化学制备及其对乙醇氧化的催化性能

以氧化铟锡(ITO)透明导电膜玻璃为基底,电化学恒电位法制备AuPd合金纳米粒子.系统考察了AuPd纳米粒子的组成和不同制备条件对其结构和电催化性能的影响.运用扫描电子显微镜(SEM)、X-射线能量散射谱(EDX)、X-射线衍射(XRD)、X-射线光电子能谱(XPS)和电化学方法进行表征.结果表明,制备的AuPd合金中Au:Pd元素比与投料比基本一致,纳米粒子分散均匀;AuPd合金纳米粒子对乙醇电氧化的催化活性和稳定性显著高于纯Pd纳米粒子.当沉积电位-0.3 V、Pd:Au=3:1时,Au1Pd3纳米粒子对乙醇电氧化表现出最高的催化活性和稳定性:其对乙醇氧化峰值电流密度是相同条件下制备的Pd纳米粒子的7.7倍,稳定测试1800 s时乙醇氧化的电流密度(1.05 mA cm~(-2))是Pd纳米粒子(0.02 mA cm~(-2))的52.5倍.     

新型纳米金直接修饰玻碳电极的制备及其电催化活性

在不使用交联剂的情况下,借助种子媒介纳米金属生长法将纳米金直接修饰到玻碳电极表面.试验发现纳米金粒子在电极表面覆盖率为5.4×10-10 mol·cm-2,[Fe(CN)6]3-/[Fe(CN)6]4-氧化还原电子探针的试验证明,纳米金修饰玻碳电极表面的电子传递速率是使用交联剂制备电极的四倍.与裸玻碳电极相比,抗坏血酸在该电极表面的氧化峰电位负移150 mV,峰电流提高2.2μA,同时与尿酸的氧化峰电位差达到186 mV,可用于抗坏血酸和尿酸的同时检测.     

Synthesis and Catalytic Activity of Copper(Ⅱ) Resorcylic Acid Nanoparticles

Copper(Ⅱ) resorcylic acid(CuRes) nanoparticles were synthesized by using reactive precipitation method with resorcylic acid and blue copperas as the raw material in a rotating packed bed. The sample obtained was characterized by using X-ray diffraction( XRD), transmission electron microscopy( TEM ), Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analyses (TG), and element analysis. In addition, the catalytic activity of CuRes nanoparticles on the thermal decomposition of nitrocellulose-nitroglycerine (NC-NG) was also determined via DSC.The results show that the spherical nanoparticles with a diameter of 20 nm were obtained in ethanol solution. The peak temperature of the thermal decomposition of NC-NG-CuRes decreases by 3 ℃ compared with that of normal CuRes,and the decomposition enthalpy is increased by 735 J/g, and therefore, it is reasonable to assume that CuRes nanoparticles have a better catalytic activity.     

Efficient thermal properties enhancement to hyperbranched aromatic polyamide grafted aluminum nitride in epoxy composites

Aluminum nitride (AlN) nanoparticles were firstly treated with a silane coupling agent, γ‐aminopropyl‐triethoxysilane (γ‐APS), to introduce amine groups (AlN‐APS), then grafting of the hyperbranched aromatic polyamide started from the modified surface (AlN‐HBP). The surface modified AlN nanoparticles were characterized by Fourier transform infrared, nuclear magnetic resonance, and thermogravimetric analyzer. Then the nanoparticles with these three different interface structures were selected as reinforcing fillers for epoxy composites. The study reports the influence of interfacial structure of nanoparticles on the morphology and thermal properties of epoxy composites. It was found that the AlN‐HBP nanoparticles result in a strong interface and thus the incorporation of the AlN‐HBP nanoparticles not only improved the dispersion of the nanoparticles in the epoxy matrix but also enhanced the thermal conductivity, thermal stability, glass transition temperatures, and dynamical thermomechanical properties. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

Enhanced photocatalytic degradation of C.I. Basic Violet 2 using TiO2-SiO2 composite nanoparticles

In this report, TiO(2) -SiO(2) composite nanoparticles were prepared by the thermal hydrolysis method using titanium tetrachloride and tetraethylorthosilicate as TiO(2) and SiO(2) precursors, respectively. The prepared nanoparticles were characterized by X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), nitrogen adsorption/desorption and UV-Vis diffuse reflectance spectroscopy (DRS). The results indicated that, in comparison with pure TiO(2), TiO(2)-SiO(2) composite nanoparticles had a higher thermal stability, which prevents phase transformation from anatase to rutile. In addition, the TiO(2)-SiO(2) nanoparticles had a higher specific surface area, larger pore volume, greater band gap energy and smaller crystallite size. Thus, the surface area of TiO(2)-40% SiO(2) composite nanoparticles was about 17 times higher than that of pure TiO(2) nanoparticles. The photocatalytic activity of TiO(2)-SiO(2) composite nanoparticles in the photodegradation of C.I. Basic Violet 2 was investigated. The photodegradation rate of Basic Violet 2 using TiO(2)-40% SiO(2) nanoparticles calcined at 600°C was much faster than that using pure TiO(2) and Degussa P25 TiO(2) by 10.9 and 4.3 times, respectively. The higher photoactivity of the TiO(2)-SiO(2) composite nanoparticles was attributed to their higher surface area, larger pore volume, greater band-gap energy and smaller crystallite size compared with pure TiO(2).     

Preparation of Ni/TiO2 Nanoparticles and Their Catalytic Performance on the Thermal Decomposition of Ammonium Perchlorate

Metal/oxide nanoparticles are attractive because of their special structure and better properties. The Ni/TiO₂ nanoparticles were prepared by a liquid phase chemical reduction method in this paper. The obtained‐products were characterized by inductively coupled plasma (ICP), X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). The results show that Ni particles in Ni/TiO₂ nanoparticles exhibit better dispersion and the size of most Ni particles is 10 nm or so. The catalytic activity of Ni/TiO₂ nanoparticles on the thermal decomposition of ammonium perchlorate (AP) was investigated by simultaneous thermogravimetry and differential thermal analysis (TG‐DTA). Results show that composite process of Ni and TiO₂ can improve the catalytic activity of Ni nanoparticles on the thermal decomposition of AP, which is mainly attributed to the improvement of Ni dispersion in Ni/TiO₂ nanoparticles. The catalytic activity of Ni/TiO₂ nanoparticles increases with increasing the weight ratio of Ni to AP.     

纳米氧化锡锑改性水性聚氨酯的制备与表征

以异佛尔酮二异氰酸酯(IPDI)、聚醚二醇（N-210）、二羟甲基丙酸（DMPA）、一缩二乙二醇（DEG）、三羟甲基丙烷（TMP）及纳米氧化锡锑（ATO）浆料为主要原料,制备了稳定的纳米ATO改性水性聚氨酯(APU)乳液。 粒径测试及透射电子显微镜（TEM）观察显示,纳米ATO在水性聚氨酯中分散较好,乳液粒径均小于100 nm; FTIR分析表明,纳米ATO粒子与水性聚氨酯(WPU)间可能存在化学键; 热重分析(TGA)测试显示,随纳米ATO添加量的增加,胶膜最大热分解温度逐渐提高,最大提高了约20 ℃;紫外-可见-近红外吸收及保温性能测试表明,随着纳米ATO添加量的提高,胶膜在800~2500 nm的透过率逐渐降低,但涂层在可见光区透过率均超过70%,热阻率由1.34×10-2 m2·℃/W提高至3.17×10-2 m2·℃/W。     

三氟乙酸修饰TiO_2纳米微粒的制备及磨擦学性能

采用化学法制备一种粒径约50nm的三氟乙酸修饰TiO2纳米微粒,并用高分辨透射电镜(HRTEM)、傅立叶红外(FTIR)和热分析(TG、DTA)、X射线粉末衍射(XRD)等手段对该纳米微粒进行了表征,用MRS 10A型四球磨擦试验机考察了该纳米微粒在液体石蜡中的磨擦学性能 结果表明:三氟乙酸修饰TiO2纳米微粒能分散于液体石蜡中且具有较好的抗磨性能,能极大地提高液体石腊的抗磨性和承载能力,降低了磨擦系数     

Preparation and characterization of NiO nanoparticles from thermal decomposition of the [Ni(en)3](NO3)2 complex: A facile and low-temperature route

NiO nanoparticles with an average size of 15 nm were easily prepared via the thermal decomposition of the tris(ethylenediamine)Ni(II) nitrate complex [Ni(en)₃](NO₃)₂ as a new precursor at low temperature, and the nanoparticles were characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV-Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and magnetic measurements. The magnetic measurements confirm that the product shows a ferromagnetic behavior at room temperature, which may be ascribed to a size confinement effect. The NiO nanoparticles prepared by this method could be an appropriate photocatalytic material due to a strong absorption band at 325 nm. This method is simple, fast, safe, low-cost and also suitable for industrial production of high purity NiO nanoparticles for applied purposes.     

油基-金纳米流体的制备及热稳定性

分别采用N-十六烷基-N-(羟乙基)-N,N-二甲基溴化铵(CHDAB)和丁烷-1,4-二(N-十六烷基-N,N-二甲基溴化铵)(G16-4-16)2种阳离子表面活性剂作为金属表面修饰剂, 在石油醚/正丁醇/水混合体系中用KBH₄ 还原HAuCl₄制备出亲油性纳米金. 其中, 双子表面活性剂G16-4-16显示出更好的包裹分散作用, 其包裹的纳米金粒径分布范围较窄, 平均粒径为5.2 nm. 将该纳米金颗粒分散在液态烷烃、 甲苯和长链烷基醇等溶剂中可制成稳定的油基纳米流体. 采用紫外-可见光谱法跟踪热稳定性随时间的变化, 结果表明, 该纳米流体显示了较好的热稳定性, 在130 ℃稳定时间达20 h. 采用点热源法测定了该纳米流体的导热系数, 结果表明, 50 ℃时添加质量分数1.5%的纳米金可以使其导热系数增大约17%.     

微乳液中单分散银纳米颗粒的制备及抗磨性能

采用水/液体石蜡/Span 80-Tween 80/正丁醇微乳液体系, 制备了具有良好单分散性的Ag纳米颗粒. 通过X射线粉末衍射仪、透射电子显微镜、傅立叶变换红外光谱仪和热分析仪表征了Ag纳米颗粒的结构、形貌、粒径大小及分布、表面键合性质和热性能. 结果表明, 所制备的Ag纳米颗粒具有立方晶型结构, m(Span 80)∶m(Tween 80)=7∶3时, 粒径分布呈单分散性, 平均粒径约为6 nm. 在四球长时抗磨损试验机上考察了分散于液体石蜡中Ag纳米颗粒的抗磨性能. 实验结果表明, Ag纳米颗粒具有良好的抗磨性, 且能显著提高基础油的承载能力.