浊点萃取-分光光度法测定自来水及酒类样品中的痕量铁

利用非离子表面活性剂TritonX-100在温度高于其浊点时形成相分离行为,建立了浊点萃取-分光光度法测定痕量铁的新方法,探讨优化了以KSCN为显色剂,TritonX-100浊点萃取富集痕量铁的实验条件.研究发现:加入正辛醇可使TritonX-100的浊点降低约30℃,有利于萃取实验的进行;同时,加入的正辛醇与TritonX-100对痕量铁起到了协同萃取作用.在优化了的实验条件下,进行了痕量铁的分析,检出限为0.02mg·L-1,加标回收率为97.4%～101.6%,应用于自来水及酒类样品中痕量铁的测定,结果满意.     

浊点萃取-分光光度法测定痕量NO2-

建立了浊点萃取-分光光度法测定痕量NO2-根的方法.以对氨基苯磺酸和α-萘胺为络合剂,非离子型表面活性剂TritonX-100为萃取剂,富集、分离水样中痕量NO2-,采用可见吸收光谱法进行检测.研究了溶液的酸度、试剂用量、平衡时间、平衡温度、干扰离子对浊点萃取效果的影响,并得到最佳实验条件:5％的TritonX-100用量2.0mL、平衡温度85℃、平衡时间10min、对氨基苯磺酸和α-萘胺均为0.3mL、0.1mol/LH2SO4溶液0.5mL.在最佳实验条件下,对氨基苯磺酸、α-萘胺和NO2-生成的络合物被萃取到TritonX-100表面活性剂相并与水相分开.该方法适用于环境水样中痕量NO2-的测定.     

浊点萃取-火焰原子吸收光谱法测定人尿液中的痕量铅

以双硫腙作为络合剂、聚乙二醇辛基苯基醚(TritonX-100)为非离子表面活性剂,建立浊点萃取-火焰原子吸收光谱测定尿液中痕量铅的方法。探讨了络合剂用量、平衡时间、pH值、TritonX-100用量、冰浴时间等因素对萃取效率的影响。结果表明:该方法对铅的最大富集倍数约为40倍,检出限为0.06μg·L-1(n=11)。回收率在96.7%~101%,线性范围为0~1.00μg·mL-1。利用该方法测定尿液中痕量铅的含量,结果令人满意。     

浊点萃取-火焰原子吸收光谱法测定食品和饮料中的痕量铜

研究了基于非离子表面活性剂TritonX-114和螯合剂二乙基氨基二硫代甲酸钠(DDTC)的浊点萃取-火焰原子吸收光谱法测定痕量铜的分析方法.考察了影响浊点萃取效率的参数,包括pH值、DDTC浓度、TritonX-114用量、平衡温度及时间等.在优化条件下,本法的检出限(3σ)为1.55μg/L,相对标准偏差RSD为3.4%(n=7,c=100μg/L),线性范围为0～250μg/L.将该法应用于茶叶标准样品(GBW07605)、奶粉和矿泉水等样品中痕量铜的测定,其回收率在96.7%～113.5%之间.     

浊点萃取-紫外可见分光光度法测定痕量金

建立了以四甲基联苯胺(TMB)为络合剂,非离子表面活性剂Triton-114为萃取剂的浊点萃取-紫外可见分光光度法测定痕量金的方法。考察了溶液的pH、络合剂和表面活性剂浓度、平衡温度和时间等条件对浊点萃取的影响。在最优条件下,该方法对金的富集倍数为12倍,线性范围为0～0.5μg/mL,检出限(3σ)为8.6ng/mL,相对标准偏差RSD为2.3%～3.6%(n=6),回收率在97%～102%之间。方法已用于工业废水中痕量金的测定。     

ABTT浊点萃取分光光度法测定水样中镉

利用非离子表面活性剂Triton X-114在温度高于其浊点时形成相分离行为,建立了浊点萃取-分光光度法测定水样中痕量镉的新方法,优化了以1-偶氮苯-3-噻唑-三氮烯(ABTT)为显色剂,Triton X-114浊点萃取富集痕量镉的实验条件.在最大吸收波长λ=520 nm,其表观摩尔吸光系数为6.84×105L·mol...     

浊点萃取-热喷雾火焰炉原子吸收光谱法测定水中痕量锌(Ⅱ)

建立了以吡咯烷二硫代氨基甲酸铵(APDC)为络合剂、TritonX-100为表面活性剂的浊点萃取-热喷雾火焰原子吸收光谱法测定水样中痕量锌的方法.考查了APDC的浓度、溶液酸度、表面活性剂浓度、加热时间、水浴温度、干扰离子等实验条件对浊点萃取效率的影响.在最优化的实验条件下.方法的检出限为0.1 ng/mL,RsD为4...     

浊点萃取-石墨炉原子吸收光谱法测定环境样品中的痕量镉

研究了浊点萃取-石墨炉原子吸收光谱法(GFAAS)测定痕量镉的新方法,利用表面活性剂Triton X-100和络合剂1-(2-吡啶偶氮)-2-萘酚(PAN)对镉进行浊点萃取。详细探讨了影响浊点萃取及测定灵敏度的因素。优化条件为:0.25 mL 30%NaC l,pH 8.5,0.50 mL、4.0×10-4mol/L PAN,0.2 mL 1.0%TritonX-100。在最佳条件下,镉的富集倍率为50倍,检出限为5.9 ng/L,RSD为2.1%。该方法用于环境样中痕量镉的富集和测定,结果令人满意。     

浊点萃取-荧光光度法测定苯酚

基于非离子表面活性剂TritonX-100,以浊点萃取结合荧光光度法测定水中的苯酚,考察影响浊点萃取的各种因素。最佳实验条件为：pH=3.0的磷酸氢二钠-磷酸二氢钾缓冲溶液中,5%的TritonX-100用量2.0mL、平衡温度82℃、平衡时间8min。在此条件下,苯酚被萃取到TritonX-100表面活性剂相与水相分开。     

浊点萃取-火焰原子吸收光谱法测定荔枝和桂圆肉中痕量铜

建立以二乙基二硫代氨基甲酸钠(DDT℃)为配位剂、TritonX-114为表面活性剂的浊点萃取-火焰原子吸收测定荔枝和桂圆肉中痕量铜的方法.研究了溶液pH值、配位剂类型与浓度、表面活性剂类型与浓度、平衡温度和平衡时间等实验条件对浊点萃取效率的影响.在最优的实验条件下,该方法测定铜的检出限为0.8μg/L,相对于传统火焰...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.