Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Phenylmercury(II) derivatives of tetraorganodichalcogenoimidodiphosphorus acids. Crystal and molecular structure of [PhHg{(OPR2)(SPPh2)N}]2 (R=Me, Ph)

The reactions between PhHgCl or PhHgAc and M[(XPR₂)(YPR′₂)N] (M=Na, K; X, Y=O, S; R, R′=Me, Ph, OEt), in 1:1 molar ratio, have been investigated. PhHg[(XPR₂)(YPR′₂)N] derivatives were isolated as microcrystalline powders and were characterised using IR and NMR (¹H, ¹³C and ³¹P) spectroscopy and mass spectrometry. The molecular structure of PhHg[(OPR₂)(SPPh₂)N] [R=Me (1), Ph (2)] was investigated by X-ray diffraction. In the monomeric unit, PhHg[(OPR₂)(SPPh₂)N], the mercury atom forms the primary bonds with the carbon of the phenyl group and the sulfur atom of the phosphorus ligand [Hg(1)-S(1) 2.405(1) Å for 1, 2.398(2) Å for 2]. These primary bonds are significantly deviated from the expected linear arrangement [C(1)-Hg(1)-S(1) 166.4(2)° for 1, 165.0(2)° for 2]. Both compounds exhibit dimeric associations in the crystal through S,O-bridging organophosphorus ligands [Hg(1)-O(1) 2.556(4) Å for 1, 2.588(4) Å for 2], thus resulting in a distorted T-shaped arrangement of the CHgSO coordination core.. The formation of a 12-membered Hg₂O₂S₂P₄N₂ ring with different conformation in 1 and 2, respectively, results in different additional chalcogen atoms being in the proximity of the metal atom. Weak transannular Hg?O [2.753(4) Å] are also established in 1, leading to a tricyclic ladder structure with a planar central Hg₂O₂ ring.     

Synthesis and structures of crystalline lithium 1-azaallyls and a 1,3-diazaallyl derived from Li{CH(SiMe3)(SiMe3−n(OMe)n)} (n=1 or 2) and Li{CH(SiMe2OMe)2} and RCN (R=Bu, Ph, 2,5-Me2C6H3, or Ad)

Crystalline [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₃)}]₂ (5), [Li{N(SiMe₂OMe)C(Ph)C(H)(SiMe₃)}]₂ (6), [C(C₆H₃Me₂-2,5)C(H)(SiMe₃)}(TMEDA)](7), [Li{N(SiMe(OMe)₂)C(^tBu)C(H)(SiMe₃)}(THF)]₂ (8), Li{N(SiMe(OMe)₂)C(Ph)C(H)(SiMe₃)}(TMEDA) (9) and [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₂OMe)}]₂ (10) were readily obtained at ambient temperature from (i) [Li{CH(SiMe₃)(SiMe₂OMe)}]₈ (1) and an equivalent portion of RCN (R=^tBu (5), Ph (6) or 2,5-Me₂C₆H₃ (7)); (ii) [Li{CH(SiMe₃)(SiMe(OMe)₂)}]_∞ (2) and an equivalent portion of ^tBuCN (8) or PhCN (9); and (iii) [Li{CH(SiMe₂OMe)₂}]_∞ (3) and one equivalent of ^tBuCN (10). Reactions (i) and (ii) were regiospecific with SiMe_3−n(OMe)_n>SiMe₃ in 1,3-migration from C (in 1 or 2)→N. The 1-azaallyl ligand was bound to the lithium atom as a terminally bound κ¹-enamide (8 and 10), a bridging η³-1-azaallyl (6), or a bridging κ¹-enamide (5). The stereochemistry about the CC bond was Z for 5, 8 and 10 and E for 7. X-ray data are provided for 5, 6, 7, 8 and 10 and multinuclear NMR spectra data in C₆D₆ or C₆D₅CD₃ for each of 5-10.     

Bis(silylaminodiarylphosphoranylsilylmethyl-C,N)-tin(II) and -lead(II) complexes and their precursors; structures of H(LL′), H(LL″), Sn(LL″)2 and Pb(LL″)2; [LL′] = [CH(SiMe3)P(Ph)2NSiMe3],

We report a series (a)-(d) of tandem reactions involving the conversion of: (a) 2CH₂(SiMe₃)P(Ph)₂NSiMe₃ [2H(LL′)] (III) into successively [Li(LL′)]₂ (1a) and [Pb(LL′)₂] (3a); (b) 1a in turn into {[Li(LL″)]₂} (2) and [Pb(LL″)₂] (4); (c) 1a successively into Sn(LL′)Cl (5) and [Sn(LL″)₂] (6); (d) (1b) into (3b). Experimental details for the preparation and characterisation (including elemental analysis and multinuclear NMR spectra in C₆D₆ and EI mass spectra) of 1a, 2, 3a, 3b, 4, 6, III (a new synthesis) and IV are provided. The X-ray structures of crystalline 4, 6, III and IV are presented; those of 1a, 2 and 3a were previously published.     

Synthesis and characterization of uranium(III) compounds supported by the hydrotris(3,5-dimethyl-pyrazolyl)borate ligand: Crystal structures of [U(Tp)2(X)] complexes (X = OC6H2-2,4,6-Me3, dmpz, Cl)

Reaction of [U(Tp^Me2)₂(NR₂)] (R = Ph, SiMe₃) with protic substrates such as 2,4,6-trimethylphenol (HOC₆H₂-2,4,6-Me₃), 3,5-dimethylpyrazole (Hdmpz), 2-mercaptopyridine (HSC₅H₄N) and phenylacetylene (HCCPh) afforded the corresponding [U(Tp^Me2)₂(OAr)] (Ar = C₆H₂-2,4,6-Me₃) (1), [U(Tp^Me2)₂(dmpz)] (2), [U(Tp^Me2)₂(η²-SC₅H₄N)] (3), and [U(Tp^Me2)₂(CCPh)] (4) compounds. Reaction of [U(Tp^Me2)₂(NR₂)] with Me₃SnCl or Me₃SiBr gave [U(Tp^Me2)₂Cl] (5) and [U(Tp^Me2)₂Br] (6), respectively, in high yield. The amido precursors failed to react with cyclopentadiene, but metathesis of [U(Tp^Me2)₂I] with NaCp yielded [U(κ³-Tp^Me2)(κ²-Tp^Me2)(η⁵-Cp)] (7). Thermolysis of 7 resulted in oxidation of the metal centre and redistribution of the ligands, giving [UCp₃(dmpz)] (8), pyrazabole (9) and [U(Tp^Me2)(dmpz)₃] (10). The complexes have been fully characterized by spectroscopic methods and the structures of 1, 2, and 5 were confirmed by X-ray crystallographic studies. In the solid state the complexes exhibit distorted pentagonal bipyramidal geometries.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

Synthesis and Structures of Homoleptic Methyl‐ and Phenylthiomethylaluminium Complexes [Al(CH2SR)3](R = Me,Ph)

Sulfur‐substituted methylmercury compounds [Hg(CH₂SR)₂]( 1a, R = Me; 1b, R = Ph ) react with aluminium amalgam in refluxing toluene with transmetallation to give homoleptic tris(thiomethyl)aluminium complexes [Al(CH₂SR)₃]( 2a, R = Me; 2b, R = Ph ) (degree of conversion: >80%, isolated yields: 2a 63%, 2b 41%). Their identities were confirmed by NMR spectros‐copy (¹H, ¹³C) and X‐ray crystal structure analyses. In crystals of compound 2a the aluminium atoms possess a trigonal‐bipyramidal arrangement with the coordination polyhedron defined by three carbon and two sulfur atoms. Two of the three CH₂SMe ligands are bridging ligands (μ‐η²; 1kC:2kS), the third one is terminal bound (η¹; kC). The structure is polymeric. Crystals are threaded by helical chains built up of six‐membered Al₂C₂S₂ rings. Crystals of 2b are built up of centrosymmetrical dimers with six‐membered Al₂C₂S₂ rings having bridging CH₂SPh ligands (μ‐η²; 1kC:2kS). On each Al atom two terminal (η¹; kC)CH₂SPh ligands are bound. They exhibit quite different Al‐C‐S angles (116.7(4) and 106.5(3)?). Similar values (114.32115.7? and 109.52109.9?) were found in ab initio calculations of model compounds [{Al(CH₂SR)₃}₂]( 3a, R=H; 3b, R=Me; 3c, R=CH=CH₂ ). A conformational energy diagram for rotation of one of the terminal CH₂SH ligand in the parent compound 3a around the Al‐C bond is discussed in terms of repulsive interactions of lone electron pairs of sulfur atoms.     

Synthesis,structures, and spectroscopic properties of Hg(II) complexes of bidentate NN and tridentate NNO Schiff-base ligands

Reactions of HgX₂ (X?=?Cl, N₃, NO₃) with (E)-2-methoxy-N-(pyridin-2-ylmethylene)aniline (L¹) and (E)-4-methoxy-N-(pyridin-2-ylmethylene)aniline (L²) in ethanol gave two monomers, [HgL¹(Cl)₂] (1) and [HgL²(NO₃)₂(DMSO)] (5), and three coordination polymers, {[HgL¹(N₃)₂]₂·Hg(N₃)₂}_n (2), [HgL²(Cl)₂]_n (3), and [HgL²(NO₃)₂]_n·nCH₃CN (4). Compounds 1–5 were characterized by elemental analysis, IR, NMR spectroscopy, and single-crystal X-ray diffraction. The common feature of monomeric 1 and 5 is the presence of intra- and intermolecular Hg–O bonds. In the absence of these, polymeric structures arise as a result of azide, chloride, and nitrate bridging in 2, 3, and 4, respectively. Fluorescent properties of 1–5 were also investigated.     

Synthesis, characterization and X-ray crystal structures of seven-coordinate pentagonal-bipyramidal zinc(II), cadmium(II) and tin(IV) complexes of a pentadentate N3S2 thiosemicarbazone

New complexes of the general formula, [M(H₂dap⁴NMetsc)(H₂O)₂](NO₃)₂·H₂O (M = Zn²⁺, Cd²⁺; H₂dap⁴NMetsc = 2,6-diacetylpyridinebis(⁴N-methylthiosemicarbazone) and [Sn((dap⁴NMetsc)X₂] (X = Ph, Cl and I) (dap⁴NMetsc = the doubly deprotonated form of 2,6-diacetylpyridine bis(⁴N-methylthiosemicarbazone) have been synthesized and structurally characterized by a variety of physico-chemical techniques. X-ray crystallographic structure determination shows that in the zinc and cadmium complexes, the bis(thiosemicarbazone) ligand coordinates as a neutral N₃S₂ pentadentate chelating agent through the two azomethine nitrogen atoms, the pyridine nitrogen atom and the two thione sulfur atoms. The N₃S₂ donors of the ligand occupy the equatorial plane and the two aqua ligands occupy the sixth and seventh axial positions of the seven-coordinated cadmium(II) and zinc(II) ions. In the tin(IV) complexes, however, the thiosemicarbazone is coordinated to the tin(IV) ion as a dinegatively charged pentadentate chelating agent via the pyridine nitrogen atom, the two azomethine nitrogen atoms and the two thiolate sulfur atoms. The two apical positions of the seven-coordinate tin(IV) ion are occupied by either phenyl, chlorido or iodido ligands. In each of the complexes, the overall geometry adopted by the metal ion may be considered as a distorted pentagonal-bipyramid.     

Synthesis, XRD structure and properties of diaqua(p-toluidine-N,N-di-3-propionato)copper(II) dihydrate [Cu(p-Tdp)(H2O)2]·2H2O

The copper(II) complex [Cu(p-Tdp)(H₂O)₂]·2H₂O, where p-Tdp is the anion of p-toluidine-N,N-di-3-propionic acid (or N,N-di(2-carboxyethyl)-p-toluidine), has been synthesized and characterized by X-ray diffraction. Three crystallographically independent [Cu(p-Tdp)(H₂O)₂] molecules have a similar structure. The Cu atoms have a square pyramidal environment (4+1) with a small trigonal bipyramidal distortion. The ortho-H atom of the benzene ring blocks up the sixth coordination position of the Cu polyhedron. The basal plane is formed by the donor atoms of the tridentate ligand and by the water molecule (average bond length Cu---N 2.03, Cu---O 1.93, Cu---O_w 2.00 Å), the apex is occupied by another water molecule (Cu---O_w 2.27 Å). The Cu atoms are located 0.20–0.30 Å out of the mean planes of the four basal atoms towards the apical O_w atom. The IR and electronic absorption spectra of p-Tdp and the title compound have been described. UV–Vis reflectance spectra shows that the complex has the same square pyramidal geometry in the crystal state and in solution. The protonation constants of the ligand log K₁=6.87(2), log K₂=3.75(2), log K₃=2.57(2) and stability constants log K_CuH(p-Tdp)=2.13(5), log K_Cu(p-Tdp)=6.38(3) were determined by pH-titration at 25.0 °C and I=0.1 M KNO₃.     

Novel bicyclic hexanuclear copper(I) aggregate: Structure and solid state P CPMAS NMR spectra of [(Cu3L3)2] and [Cu(PPh3)2L] complexes of N-(diisopropoxythiophosphinyl)-N′-phenylthiourea (HL)

A new complex of N-thiophosphorylthiourea PhNHC(S)NHP(S)(OiPr)₂ (HL) of formula [(Cu₃L₃)₂] has been synthesized and characterized by single crystal X-ray diffraction, FT-IR, ¹H, ³¹P NMR in solution and by ³¹P CPMAS NMR spectroscopy in the solid state. A comparison of the structure and the spectral parameters of [(Cu₃L₃)₂] with those of the mononuclear analogue [Cu(PPh₃)₂L] was performed. In the solid state the aggregate [(Cu₃L₃)₂] represents the first example of a spontaneous “side-by-side” association of two neutral cyclic [Cu₃L₃] moieties using two Cu-S-Cu bridges formed by the sulfur atoms of the PS-groups. The values of the ¹J(³¹P-^63,65Cu) and ²J(³¹P-³¹P) coupling constants of the [Cu(PPh₃)₂]⁺ moiety in the solid state spectra are reported.     

Tuning the sulfur-heterometal interaction in organolead(IV) complexes of [Pt2(μ-S)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with Ph₃PbCl, Ph₂PbI₂, Ph₂PbBr₂ and Me₃PbOAc result in the formation of bright yellow to orange solutions containing the cations [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ (R₃ = Ph₃, Ph₂I, Ph₂Br, Me₃) isolated as PF₆⁻ or BPh₄⁻ salts. In the case of the Me₃Pb and Et₃Pb systems, a prolonged reaction time results in formation of the alkylated species [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (R = Me, Et). X-ray structure determinations on [Pt₂(μ-S)₂(PPh₃)₄PbMe₃]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PbPh₂I]PF₆ have been carried out, revealing different coordination modes. In the Me₃Pb complex, the (four-coordinate) lead atom binds to a single sulfur atom, while in the Ph₂PbI adduct coordination of both sulfurs results in a five-coordinate lead centre. These differences are related to the electron density on the lead centre, and indicate that the interaction of the heterometal centre with the {Pt₂S₂} metalloligand core can be tuned by variation of the heteroatom substituents. The species [Pt₂(μ-S)₂(PPh₃)₄PbR₃]⁺ display differing fragmentation pathways in their ESI mass spectra, following initial loss of PPh₃ in all cases; for R = Ph, loss of PbPh₂ occurs, yielding [Pt₂(μ-S)₂(PPh₃)₃Ph]⁺, while for R = Me, reductive elimination of ethane gives [Pt₂(μ-S)₂(PPh₃)₃PbMe]⁺, which is followed by loss of CH₄.     

New bifunctional N-thiophosphorylated thiourea and 2,5-dithiobiurea derivatives. Crystal structures of R[C(S)NHP(S)(OiPr)2]2 (R = –N(Ph)CH2CH2N(Ph)– and –NHNH–)

A new bifunctional N-thiophosphorylated thiourea and 2,5-dithiobiurea of the common formula R[C(S)NHP(S)(OiPr)₂]₂ [R = –N(Ph)CH₂CH₂N(Ph)– (H₂L^a); –NHNH– (H₂L^b)] have been synthesized and characterized by IR, ¹H, ³¹P spectroscopy and the single crystal X-ray diffraction method. The structure of the latter compound in CDCl₃ and acetone-d₆ solutions has been discussed in comparison with the monofunctional thiosemicarbazide PhNHNHC(S)NHP(S)(OiPr)₂ (HL^c).     

Synthesis and characterisation of the platinum complexes [PtCl(CClPAr)(PPh3)2] and [PtCl(CClPAr′)(PPh3)2] as potential intermediates in the preparation of phosphaalkynes

Oxidative addition reactions of Cl₂CPR (R = 2,4,6-tris(trifluoromethyl)phenyl (Ar) or 2,6-bis(trifluoromethyl)phenyl (Ar′) with Pt(PPh₃)₄ yield the cis and trans (at platinum) complexes [PtCl(ClCPAr)(PPh₃)₂] and [PtCl(ClCPAr′)(PPh₃)₂]. All starting materials and intermediates have been characterised by NMR spectroscopy. The crystal and molecular structures of the trans-platinum complexes have been determined by single-crystal X-ray diffraction at low temperature.     

Preparation,NMR studies and crystal structure of mononuclear and dinuclear Pd(II) and Pt(II) complexes that contain 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene

The reaction between 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene (bddf) and [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) in a 1:1 M/L ratio in CH₂Cl₂ or acetonitrile solution, respectively, gave the complexes trans-[MCl₂(bddf)] (M = Pd(II) (1), Pt(II) (4)), and in a 2:1 M/L ratio led to [M₂Cl₄(bddf)] (M = Pd(II) (2), Pt(II) (5)). Treatment of 1 and 4 with AgBF₄ and NaBPh₄, respectively, gave the compounds [Pd(bddf)](BF₄)₂ (3) and [Pt(bddf)](BPh₄)₂ (6). When complexes 3 and 6 were heated under reflux in a solution of Et₄NBr in CH₂Cl₂/CH₃OH (1:1) for 24 h, analogous complexes to 1 and 4 with bromides instead of chlorides bonded to the metallic centre were obtained. These complexes were characterised by elemental analyses, conductivity measurements, infrared, ¹H, ¹H{¹⁹⁵Pt}, ¹³C{¹H}, ¹⁹⁵Pt{¹H} NMR, HSQC and NOESY spectroscopies. The X-ray crystal structure of the complex [Pd(bddf)](BF₄)₂ · H₂O has been determined. The metal atom is tetracoordinated by the two azine nitrogen atoms of the pyrazole rings and two thioether groups.     

Hydrothermal synthesis and structure of the first tin(II) squarate Sn2O(C4O4)(H2O)—comparison with Sn2[Sn2O2F4]

A tin(II) squarate Sn₂O(C₄O₄)(H₂O) was synthesized by hydrothermal technique. It crystallizes in the monoclinic system, space group C2/m (no. 12) with lattice parameters a=12.7380(9) Å, b=7.9000(3) Å, c=8.3490(5) Å, β=121.975(3)°, V=712.69(7) Å³, Z=4. The crystal structure determined with an R=0.042 factor, consists of [(Sn₄O₁₀)(H₂O)₂] units connected from one another in the [101] and [010] directions via squarate groups to form layers separated by Sn(II) lone pairs. This compound presents the same remarkable structural arrangement as observed in the tin-oxo-fluoride Sn₂[Sn₂O₂F₄] inorganic compound with Sn(II) lone pairs E(1) and E(2) concentrated in large rectangular-shape tunnels running along [001] direction.     

High-pressure high-temperature synthesis and crystal structure of the isotypic rare earth (RE)-thioborate-sulfides RE9[BS3]2[BS4]3S3, (RE=Dy-Lu)

Application of high-pressure high-temperature conditions (3.5 GPa at 1673 K for 5 h) to mixtures of the elements (RE:B:S=1:3:6) yielded crystalline samples of the isotypic rare earth-thioborate-sulfides RE₉[BS₃]₂[BS₄]₃S₃, (RE=Dy-Lu), which crystallize in space group P6₃ (Z=2/3) and adopt the Ce₆Al_3.33S₁₄ structure type. The crystal structures were refined from X-ray powder diffraction data by applying the Rietveld method. Dy: a=9.4044(2) Å, c=5.8855(3) Å; Ho: a=9.3703(1) Å, c=5.8826(1) Å; Er: a=9.3279(12) Å, c=5.8793(8) Å; Tm: a=9.2869(3) Å, c=5.8781(3) Å; Yb: a=9.2514(5) Å, c=5.8805(6) Å; Lu: a=9.2162(3) Å, c=5.8911(3) Å. The crystal structure is characterized by the presence of two isolated complex ions [BS₃]^3- and [BS₄]^5- as well as [□(S^2-)₃] units.     

The first non-acetato members of the bis(anion)octacarboxylatotetrakis{di-2-pyridyl-methanediolate(−2)}enneametal(II) family of complexes: Synthesis, X-ray structures and magnetism of [M9(N3)2(O2CCMe3)8{(py)2CO2}4] (M = Co, Ni)

The combined use of di-2-pyridyl ketone [(py)₂CO] and azides (N₃⁻) in nickel(II) and cobalt(II) pivalate chemistry has afforded complexes [Ni₉(N₃)₂(O₂CCMe₃)₈{(py)₂CO₂}₄] (1) and [Co₉(N₃)₂(O₂CCMe₃)₈{(py)₂CO₂}₄] (2), where (py)₂CO₂²⁻ is the gem-diolate(−2) form of (py)₂CO. The complexes are isostructural and crystallize in the monoclinic P2₁/c space group. Their molecular structures consist of nine metal(II) ions, eight of which are arranged as two parallel squares flanking the ninth. DC magnetic susceptometry on powdered samples of 1 (1-p) reveal an overall antiferromagnetic behavior, leading to an S = 0 ground state. AC susceptometry reveals out-of-phase signals between 10 and 27 K, and ZFC and FC experiments show a divergence of the two curves below ∼27 K. Magnetization-decay and field-sweep experiments verify the relaxation behavior of the sample. Samples of the complex arising from carefully washed single crystals (1-cr) reveal a similar DC behavior, without however the appearance of cusps in the χ_ΜΤ versus T curves, and no relaxation. The relaxation behavior has been assigned to NiO impurities. The results illustrate the extreme care that should be taken when examining the magnetic properties of apparently analytically pure materials obtained under heating. Complex 2 exhibits an overall antiferromagnetic behavior, without observation of any relaxation phenomena.     

Cyano-bridged bimetallic complexes of copper(II) with tetracyanonickelate(II). Crystal structure of [Cu(dpt)Ni(CN)4]

Five new complexes of composition [Cu(dpt)Ni(CN)₄] (1) (dpt=dipropylenetriamine), [Cu(dien)Ni(CN)₄]·2H₂O (2) (dien=diethylenetriamine), [Cu(N,N′-dimeen)Ni(CN)₄]·H₂O (3) (N,N′-dimeen=N,N′-dimethylethylenediamine), [Cu(N,N-dimeen)Ni(CN)₄]·H₂O (4) (N,N-dimeen=N,N-dimethylethylenediamine) and [Cu(trimeen)Ni(CN)₄] (5) (trimeen=N,N,N′-trimethylethylenediamine) have been obtained by the reactions of the mixture of Cu(ClO₄)₂·6H₂O, appropriate amine and K₂[Ni(CN)₄] in water and have been characterized by IR and UV–Vis spectroscopies and magnetic measurements. The crystal structure of [Cu(dpt)Ni(CN)₄] (1) has been determined by single-crystal X-ray analysis. The structure of 1 consists of a one-dimensional polymeric chain ---Cu(dpt)---NC---Ni(CN)₂---CN---Cu(dpt)--- in which the Cu(II) and Ni(II) atoms are linked by CN groups. The nickel atom is four coordinate with four cyanide-carbon atoms (two cyano groups are terminal and two cyano groups (in cis fashion) are bridged) in a square-planar arrangement and the copper atom is five coordinate with two cyanide-nitrogen and three dpt-nitrogen atoms, in a distorted square-pyramidal arrangement. The temperature dependence of magnetic susceptibility (2–300 K) was measured for compound 1. The magnetic investigation showed the presence of a very weak antiferromagnetic interaction (J=−0.16 cm⁻¹) between the copper atoms within each chain through the diamagnetic Ni(CN)₄ ²⁻ ions.     

Transition metal chemistry of phosphorus based ligands. Ruthenium(II) chemistry of bis(phosphino)amines, X2PN(R)PX2 (R=H or Ph, X=Ph; R=Ph, X2=O2C6H4)

Reactions of CpRuCl(PPh₃)₂ with bis(phosphino)amines, X₂PN(R)PX₂ (1 R=H, X=Ph; 2 R=X=Ph; 3 R=Ph, X₂=O₂C₆H₄) give neutral or cationic mononuclear complexes depending on the reaction conditions. Reaction of 1 with CpRuCl(PPh₃)₂ gives one neutral complex, [CpRu(Cl)(η²-Ph₂PN(H)PPh₂)] (4) and two cationic complexes, [CpRu(η²-Ph₂PN(H)PPh₂)(η¹-Ph₂PN(H)PPh₂)]Cl (5) and [CpRu(PPh₃)(η²-Ph₂PN(H)PPh₂)]Cl (6), whereas the reaction of 2 with CpRuCl(PPh₃)₂ leads only to the isolation of cationic complex, [CpRu(PPh₃)(η²-Ph₂PN(Ph)PPh₂)]Cl (7). The catechol derivative 3, in a similar reaction, affords an interesting mononuclear complex [CpRu(PPh₃){η¹-(C₆H₄O₂)PN(Ph)P(O₂H₄C₆)}₂]Cl (8) containing two monodentate bis(phosphino)amine ligands. The structural elucidation of the complexes was carried out by elemental analyses, IR and NMR spectroscopic data.