Novel ABC2-type liquid-crystalline block copolymers with azobenzene moieties prepared by atom transfer radical polymerization

A series of novel ABC₂-type liquid-crystalline block copolymers with azobenzene moieties in the side chains were prepared by combination of atom transfer radical polymerization (ATRP) and the chemical modification reaction. First, the bromine-terminated diblock copolymer poly(ethylene oxide) monomethyl ether-block-polystyrene (MPEO-PS-Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO-Br, which was obtained from the esterification of MPEO and 2-bromoisobutyryl bromide. Then, the bromo end groups of the resulting MPEO-PS-Br were derivatized into twice as many bromoisobutyrates by the chain end modification reaction to obtain ω,ω′-bis(bromo)-PS-MPEO (MPEO-PS-Br₂). The azobenzene-containing blocks of poly[6-(4-methoxy-azobenzene-4′-oxy) hexyl methacrylate] (PMMAZO) with different molecular weights were introduced into the derivative diblock copolymer by a second ATRP to synthesize the novel ABC₂-type liquid-crystalline block copolymers poly(ethylene oxide) monomethyl ether-block-polystyrene-block-{poly[6-(4-methoxy-azobenzene-4′-oxy) hexyl methacrylate]}₂ [MPEO-PS-(PMMAZO)₂].     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Molecular captain: A light‐sensitive linker molecule in poly(ethylene glycol)‐poly(L‐alanine)‐poly(ethylene glycol) triblock copolymer directs molecular nano‐assembly,conformation, and sol‐gel transition

We report a poly(ethylene glycol)‐poly(L ‐alanine)‐azobenzene‐poly(L ‐alanine)‐poly(ethylene glycol) (PEG‐PA‐Z‐PA‐PEG) as a temperature and light sensitive polymer. The poly(ethylene glycol)‐poly(L ‐alanine) diblock copolymers with a flexible‐rigid block structure were coupled by an azobenzene group that undergoes a reversible configurational change between “trans” and “cis” upon exposure to UV and vis light. The single azobenzene molecule embedded in the middle of a block copolymer with a flexible (shell)‐rigid (core) structure significantly affected molecular assembly, micelle size, polypeptide secondary structure, and sol‐to‐gel transition temperature of the polymer aqueous solution, depending on its exposure to UV or vis light. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Formation of fibril structures in polymerizable, rod-coil-oligomer-modified epoxy networks

This paper describes the in situ preparation of fibrils in epoxy networks in which the fibril-like structures are cured polymerizable rod-coil oligomers. The epoxy-terminated alpha,omega-modified PEO oligomers, which are ABA rod-coil-rod oligomers with a poly(ethylene oxide) coil unit and two aromatic azomethine liquid-crystalline rod units, were synthesized and then further blended with an epoxy precursor. Uniform nanoscale columnar structures were observed in the neat rod-coil oligomers as well as in the crosslinked liquid-crystalline state. During the curing of the blends, the supramolecular nanoscale columnar structures of the rod-coil oligomers are transformed into polymeric fibrils where the epoxy functional end groups have co-reacted with epoxy precursors to form a crosslinked network.     

Synthesis and characterization of fluorinated PEO-b-PDMS-b-fluorinated PEO by free radical addition

Fluorinated poly(ethylene oxide) propyl-b-polydimethylsiloxane-b-propyl fluorinated poly(ethylene oxide)(FPEO-b-PDMS-b-FPEO) was synthesized by a free radical addition of carbon-hydrogen of polyether segments of poly(ethylene oxide) propyl-b-polydimethylsiloxane -b-propyl poly(ethylene oxide)(PEO-b-PDMS-b-PEO) to hexafluoropropylene(HFP) using tert-butyl peroxypivalate as an initiator.In order to reduce the possibility of side reaction,the protection and deprotection via silylation were used for the end-...     

Photocontrolled microphase separation of block copolymers in two dimensions

A novel ABA-type triblock copolymer, where A and B correspond to azobenzene (Az) containing polymethacrylate and poly(ethylene oxide) (PEO), respectively, was synthesized by atom transfer radical polymerization. Langmuir-Blodgett monolayers showed characteristic microphase separation structures depending on the isomerization state of the Az unit. The trans-to-cis isomerization induced an anisotropic elongation of the domain of the Az polymer parallel to the rod maintaining the width. Thus, successful photocontrol of nanostructures formed by the block copolymer in the two dimensions was performed. A plausible model for the Az packing and PEO conformation is proposed.     

Hierarchical Self‐Assembly in Liquid‐Crystalline Block Copolymers Enabled by Chirality Transfer

Helical topological structures are often found in chiral biological systems, but seldom in synthesized polymers. Now, controllable microphase separation of amphiphilic liquid‐crystalline block copolymers (LCBCs) consisting of hydrophilic poly(ethylene oxide) and hydrophobic azobenzene‐containing poly(methylacrylate) is combined with chirality transfer to fabricate helical nanostructures by doping with chiral additives (enantiopure tartaric acid). Through hydrogen‐bonding interactions, chirality is transferred from the dopant to the aggregation, which directs the hierarchical self‐assembly in the composite system. Upon optimized annealing condition, helical structures in film are fabricated by the induced aggregation chirality. The photoresponsive azobenzene mesogens in the LCBC assist photoregulation of the self‐assembled helical morphologies. This allows the construction and non‐contact manipulation of complicated nanostructures.     

Evolution of multicompartment micelles to mixed corona micelles using solvent mixtures

Miktoarm star triblock copolymers mu-[poly(ethylethylene)][poly(ethylene oxide)][poly(perfluoropropylene oxide)] self-assemble in dilute aqueous solution to give multicompartment micelles with the cores consisting of discrete poly(ethylethylene) and poly(perfluoropropylene oxide) domains. Tetrahydrofuran is a selective solvent for both the poly(ethylethylene) and poly(ethylene oxide) blocks, and thus in tetrahydrofuran mixed corona micelles are favored with poly(perfluoropropylene oxide) cores. The introduction of tetrahydrofuran into water induces an evolution from multicompartment micelles to mixed corona [poly(ethylethylene) + poly(ethylene oxide)] micelles, as verified by dynamic light scattering and nuclear magnetic resonance spectroscopy. A mixed solvent containing 60 wt % tetrahydrofuran corresponds to the transition point, as verified by analysis of a poly(ethylethylene)-poly(ethylene oxide) diblock copolymer in the same solvent mixtures. Furthermore, cryogenic transmission electron microscopy suggests that, as the poly(ethylethylene) block transitions from the core to the corona, the micelle morphologies evolve from disks to oblate ellipsoid micelles (with some vesicles), with worms and spheres evident at intermediate compositions.     

Mixing state of amphiphilic di-block copolymer/homopolymer blends

Summary The mixing state of amphiphilic di-block copolymers consisted of poly(ethylene oxide) and poly(methacrylate) having azobenzene moieties in the side chains p(EO)₁₁₄pMA(Az)₂₄ and poly(ethylene oxide) p(EO)₁₁₄ was investigated from the viewpoints of isothermal crystallization and nano-scale ordered structure. The chemical potential, which required establishing the constant crystal growth rate, decreased with the p(EO) content up to 60%. The hexagonal packed cylinder structure was observed for the blends with the p(EO) content up to 60% and the lattice spacing of (100) and (110) planes increased with the p(EO) content up to 60%. The blends of amphiphilic p(EO)₁₁₄pMA(Az)₂₄ and p(EO)₁₁₄ were miscible without in the p(EO) content below 60%.     

Sunlight helps self-healing of liquid-crystalline gels of lignin-graft PMMA doped with GO and azobenzene

ABSTRACT

Self-healing soft matters have attracted much attention because of their extraordinary performance for extending working life of materials. To utilise sunlight to help self-healing of liquid-crystalline gels composed of one low-mass liquid crystal (5CB) and one hyperbranched polymer (lignin-graft-PMMA), a low content of graphene oxide (GO) and one azobenzene compound are doped as photoresponsive additives. Upon irradiation of UV light, the azobenzene can induce gel-sol transition due to the photoinduced molecular cooperative motion, thus surface dents can be repaired. On the other hand, GO functions as the nanoscale heat source because of the photothermal effect under exposure of visible (VIS) or NIR light, heating the gel to undergo gel-sol transition for mending surface cracks. In addition, the mechanical properties of the gels are also improved by addition of GO. This NIR-VIS-UV light responsive liquid-crystalline gel shows highly effective gel-sol transition upon direct solar radiation because of the coexistence of both photochemical and photothermal effect. Furthermore, these sunlight-assistant self-healing gels also show anisotropy and orientation just like other liquid-crystalline materials, enabling them to find various advanced applications with longer service life.     

Complexation of linear and poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride) with poly(ethylene oxide‐block‐sodium methacrylate)

The interactions between oppositely charged polyelectrolytes were studied in saline aqueous solutions as functions of the temperature and the salt and polymer concentrations. The polyanion was a diblock copolymer composed of a poly(ethylene oxide) block and a poly(sodium methacrylate) block. Two polycations were used, the homopolymer poly(methacryl oxyethyl trimethylammonium chloride) and its poly(ethylene oxide)‐grafted analogue. By dynamic light scattering and turbidity measurements, it was observed that the salt concentration, temperature, and counterion size had a significant effect on the formation of the polymer complexes in aqueous solutions. At a fixed salt concentration and a fixed temperature, it was possible to form completely soluble complexes of an ionic polymer in aqueous solutions between poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride)and the polyanion with a poly(ethylene oxide) block at a 1:1 anion/cation ratio. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1904–1914, 2003     

Compatibility studies of styrene and hydroxyl containing styrene copolymers with poly(ethylene oxide)

Copolymers of styrene with vinylphenyl trifluoromethyl carbinol, p-vinylphenyl trifluoromethyl carbinol, vinylphenyl hexafluorodimethyl carbinol, and p-vinylphenol are conditionally compatible with poly(ethylene oxide), depending on their composition and blending ratios, whereas copolymers of styrene and vinylphenyl methyl carbinol are much less compatible with poly(ethylene oxide), as determined by T_g criteria and differential scanning calorimetry. The crystallinity of poly(ethylene oxide) is changed in the copolymer/poly(ethylene oxide) blends, as indicated by depressions of the poly(ethylene oxide) melting point. Hydrogen-bond formation has been studied in two selected blends by infrared (IR) spectroscopy. Hydrogen bonding dissociation and reassociation as a function of temperature are reported. The conformation changes of poly(ethylene oxide) in the blends, the interaction between copolymer and poly(ethylene oxide) as well as in the reference blend, polystyrene/poly(ethylene oxide), are also investigated.     

A self-diffusion study in aqueous solution and lyotropic mesophases of amphiphilic block copolymers

 Water-soluble poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PPO) triblock copolymers are high-molecular-weight nonionic copolymers and form micellar solutions and liquid-crystalline mesophases in water. We studied the temperature dependence of polymer and water self-diffusion in solutions and lyotropic mesophases of the PEO₁₃ PPO₃₀ PEO₁₃/water and PEO₂₁ PPO₄₇ PEO₂₁/water binary systems. The self-diffusion measurements were performed by means of the pulsed field gradient spin-echo NMR method. The analysis of the water mobility was realised using “the obstruction factor” and “the two-site model”, which consider the reduction of the water self-diffusion due to the microstructure of the lyotropic aggregates and to the presence of one part of the solvent bound to the polymer aggregate surfaces. We calculated the water obstruction factors and the hydration numbers as a function both of the polymer composition and of the temperature. The results are compared with the data obtained in mesophases formed by classical surfactants. Received: 16 September 1999 Accepted in revised form: 24 November 1999     

Synthesis and characterization of ABA‐type amphiphilic tri‐block copolymers through anionic polymerization using end functionalized poly(ethylene oxide) oligomers

ABA‐type amphiphilic tri‐block copolymers were successfully synthesized from poly(ethylene oxide) derivatives through anionic polymerization. When poly(styrene) anions were reacted with telechelic bromine‐terminated poly(ethylene oxide) ( 1 ) in 2:1 mole ratio, poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers were formed. Similarly, stable telechelic carbanion‐terminated poly(ethylene oxide), prepared from 1,1‐diphenylethylene‐terminated poly (ethylene oxide) ( 2 ) and sec‐BuLi, was also used to polymerize styrene and methyl methacrylate separately, as a result, poly (styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) and poly (methyl methacrylate)‐b‐poly(ethylene oxide)‐b‐poly(methyl methacrylate) tri‐block copolymers were formed respectively. All these tri‐block copolymers and poly(ethylene oxide) derivatives, 1 and 2 , were characterized by spectroscopic, calorimetric, and chromatographic techniques. Theoretical molecular weights of the tri‐block copolymers were found to be similar to the experimental molecular weights, and narrow polydispersity index was observed for all the tri‐block copolymers. Differential scanning calorimetric studies confirmed the presence of glass transition temperatures of poly(ethylene oxide), poly(styrene), and poly(methyl methacrylate) blocks in the tri‐block copolymers. Poly(styrene)‐b‐poly(ethylene oxide)‐b‐poly(styrene) tri‐block copolymers, prepared from polystyryl anion and 1 , were successfully used to prepare micelles, and according to the transmission electron microscopy and dynamic light scattering results, the micelles were spherical in shape with mean average diameter of 106 ± 5 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

白蛋白原位复合生物医用功能材料的研究(Ⅰ)──材料的合成和表面结构研究

采用大分子单体技术合成了以聚甲基丙烯酸甲酯为主链,聚氧乙烯链为侧链,末端为白蛋白诱导吸附基团的十八烷基功能聚合物聚甲基丙烯酸甲酯接枝十八烷基聚氧乙烯.采用变角X光电子能谱和表面接触角研究了该功能聚合物在空气和水界面的性质.结果表明,在聚合物-空气界面,十八烷基聚氧乙烯(SPEO)的表面含量随表面层厚度的降低而升高,并在表面发生高度富集.在聚合物-水界面,聚合物表面重组行为较弱,形成了高SPEO含量的疏水表面,该SPEO尾形结构表面预期可发挥聚氧乙烯和十八烷基的协同作用,形成白蛋白原位复合的生物医用功能材料.     

New aspects in chemistry and characterization of poly(ethylene oxide) hydrogels

To extend the variability of poly(ethylene oxide) (PEO) hydrogels in their swelling behaviour, ability to bind various subjects, and possible applications, some new synthetic approaches have been elaborated recently: (i) PEO networks with ionic and reactive groups were prepared by the reaction of P-OH groups of poly(oligoethylene glycol phosphate)s with diepoxide. The swelling degree of these hydrogels is strongly affected by salts, what is typical of polyelectrolyte networks. The structure parameters of the network evaluated from the swelling data are discussed. (ii) A series of hydrogels with controlled structure was obtained by radical polymerization of methacrylate PEO macromonomers of various molecular weights and average functionality (0.99–1.85) in aqueous media. The networks prepared are characterized by means of elastic modulus and swelling pressure measurements as well as with the help of microparticles of liquid-crystalline dispersion of DNA as probes highly sensitive to the network structure and state.     

Poly(vinyl chloride)–poly(ethylene oxide) block copolymers: Synthesis and characterization

Poly(vinyl chloride)-poly(ethylene oxide) block copolymers have been synthesized in solution and emulsion. The polymers were made by first synthesizing macroazonitriles through the reaction of 4,4′-azobis-4-cyanovleryl chloride with hydroxy-terminated poly(ethylene oxide) of varying molecular weights. These macroazonitriles had molecular weights in the range of 3000–88,000 and degrees of polymerization from 5 to 24. Thermal decomposition of the azolinkages in the presence of vinyl chloride monomer yielded block copolymers containing form 2 to 20 wt % poly(ethylene oxide). The structures of the block copolymers were characterized by spectrometric, elemental and molecular weight analyses. The possibility of some graft polymerization occurring via free-radical extraction of a methylene hydrogen from the poly(ethylene oxide) was considered. Polymerization of vinyl chloride with an azonitrile initiator in the presence of a poly(ethylene oxide) yielded predominately homopolymer with some grafted poly(vinyl chloride).     

Dynamic elasticity of triblock copolymer of poly(ethylene oxide) and poly(propylene oxide) on a water surface

Dilatational viscoelasticity of adsorbed and spread films of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer at the air-water interface is studied by the capillary waves and oscillating barrier techniques. At the surface pressure below 10 mN/m, dynamic surface properties of these films coincide with those of poly(ethylene oxide). At higher surface pressures, the results obtained indicate the desorption of poly(propylene oxide) segments from the monolayer and their interaction with poly(ethylene oxide) segments in an aqueous phase. At a surface pressure close to 19 mN/m, the behavior of adsorbed and spread poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) films becomes different. The real part of dynamic surface elasticity of spread films tends toward its maximum value (20 mN/m) and, upon further compression, films begin to dissolve. At the same time, the surface elasticity of adsorbed films decreases nearly twofold upon the achievement of the maximum value that testifies the formation of looser structure of the surface layer.     

多孔二氧化硅对聚环氧乙烷结晶行为的影响

高分子化合物由于具有很长的分子链,不易进行规整排列,结晶速度通常很慢,为提高结晶速度,有时需要加入成核剂．多孔二氧化硅（ＳｉＯ２）具有较大的比表面积,故吸附作用较强,有可能作为成核剂影响部分结晶高聚物的结晶过程．聚环氧乙烷（ＰＥＯ）为部分结晶高聚物,其结晶行为对杂质较为敏感．本文目的在于通过结晶动力学及结晶与熔融行为的研究,探索多孔二氧化硅对ＰＥＯ结晶行为的影响．１　实验部分　　聚环氧乙烷（ＰＥＯ,Ｍｗ＝１×１０５）．两种多孔二氧化硅（ＳｉＯ２）按文献［１］方法制备,平均粒度为０．３μｍ,平均孔…     

High-throughput discovery of novel steric stabilizers for cubic lyotropic liquid crystal nanoparticle dispersions

High-throughput methodologies have been employed to establish structure-property relationships and assess the effectiveness of nonionic steric stabilizers for inverse bicontinuous cubic lyotropic liquid crystalline nanoparticulate dispersions of monoolein and phytantriol. The ability of the stabilizers to disperse the lipids was compared with that of the commonly employed triblock poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) copolymer Pluronic F127, which was used as a positive control. The poly(ethylene oxide) stearate class of stabilizers (commercially known as Myrj) were discovered to be effective as steric stabilizers for cubosomes, while retaining the internal nanostructure of the "parent" bulk phase. In particular, Myrj 59, with an average of 100 poly(ethylene oxide) units, was more effective than F127 at dispersing phytantriol, forming stable phytantriol cubosome dispersions at a concentration of 0.1 wt %, 5-fold lower than that achievable with Pluronic F127. The discovery of this new effective class of stabilizers for cubosomes, specifically enabled by high-throughput approaches, broadens the versatility of components from which to construct these interesting potential drug delivery and medical imaging nanoparticles.