Study of the enantiomeric separation of an acetamide intermediate by using supercritical fluid chromatography and several polysaccharide based chiral stationary phases

Four chiral stationary phases, based on the phenylcarbamate derivatives of amylose or cellulose: Chiralcel OD-H, Chiralpak AD, Lux Cellulose-2 and Lux Amylose-2, were evaluated for the enantiomeric separation of an acetamide chiral intermediate, the (4S-trans)-4-(ethylamino)-4-(N-acetamide)-5,6-dihydro-(6S)-methyl-4H-thieno-[2,3-b]thiopyran-7,7-dioxide, using SFC. The effect of the different modifiers and temperatures, on the separation, was also studied. The chiral separation could not be achieved using the Chiralpak AD column, nevertheless the other columns provided excellent results with analysis times close to 6 min and resolutions higher than 2. The highest enantioresolutions and retentions were obtained with the Lux Cellulose-2 column and 2-propanol as organic modifier. The isoelution temperatures were estimated from the van't Hoff plots, and in all the cases they were above the temperature range studied which means that the enantiomeric separation was enthalpy driven.     

Enantiomeric separation of citalopram base by supercritical fluid chromatography

The chiral separation of citalopram base by supercritical fluid chromatography on a semipreparative Chiralpak AD column was studied with the use of three alcohol‐type modifiers (methanol, ethanol, and 2‐propanol) with different volume percentages (5, 10, and 15%). The best separation was achieved when 10% 2‐propanol was used in the presence of 0.1% diethylamine as additive. Under these conditions, the resolution reached 2.15 and the selectivity was 1.388. In addition, other parameters that affected the retention and separation properties, i.e. temperature, pressure, and density, were studied in detail. At the same pressure, a decrease in the temperature improved the enantioselectivity as the experimental temperature range was below the isoelution temperature. However, the temperature dependence of the retention factor was complicated. As a rule, the retention factor decreased when the temperature increased at the same density. A satisfactory regression of the logarithm of the retention factor versus density and temperature was obtained using a simplified lattice‐fluid model. Surprisingly, the relationship between the Henry constant and density can be accurately correlated by using the same quadratic equation.     

Chiral separation of lansoprazole and rabeprazole by capillary electrophoresis using dual cyclodextrin systems

Novel capillary electrophoresis methods using CDs as chiral selectors were developed and validated for the chiral separation of lansoprazole and rabeprazole, two proton pump inhibitors. Fourteen different neutral and anionic CDs were screened at pH 4 and 7 in the preliminary analysis. Sulfobutyl‐ether‐β‐CD with a degree of substitution of 6.5 and 10 at neutral pH proved to be the most suitable chiral selector for both compounds. Various dual CD systems were also compared, and the possible mechanisms of enantiomer separation were investigated. A dual selector system containing sulfobutyl‐ether‐β‐CD degree of substitution 6.5 and native γ‐CD proved to be the most adequate system for the separations. Method optimization was carried out using an experimental design approach, performing an initial fractional factorial screening design, followed by a central composite design to establish the optimal analytical conditions. The optimized methods (25 mM phosphate buffer, pH 7, 10 mM sulfobutyl‐ether‐β‐CD/20 mM γ‐CD, +20 kV voltage; 17°C temperature; 50 mbar/3 s injection, detection at 210 nm for lansoprazole; 25 mM phosphate buffer, pH 7, 15 mM sulfobutyl‐ether‐β‐CD/30 mM γ‐CD, +20 kV voltage; 18°C temperature; 50 mbar/3 s injection, detection at 210 nm for rabeprazole) provided baseline separation for lansoprazole (R_s = 2.91) and rabeprazole (R_s = 2.53) enantiomers with favorable migration order (in both cases the S‐enantiomers migrates first). The optimized methods were validated according to current guidelines and proved to be reliable, linear, precise, and accurate for the determination of 0.15% distomer as chiral impurity in dexlansoprazole and dexrabeprazole samples.     

Systematic evaluation of new chiral stationary phases for supercritical fluid chromatography using a standard racemate library

A systematic approach to the evaluation of new chiral stationary phases (CSPs) for supercritical fluid chromatography (SFC) using a standard library of racemic analytes is described. A standard library of racemic analytes representing a variety of functional group classes was assembled from a mixture of proprietary and commercial compounds. The library is dispensed and stored in a convenient 96-well microplate format to facilitate ease of use, and to minimize the amount of analyte required for analysis. Automated SFC screening was performed on both established CSPs in common use, as well as a group of six recently commercialized CSPs. Screening results were archived in a structure-searchable database that allows convenient comparison of performance data to determine which CSPs shows the best performance.     

Enantioselective separations by packed column subcritical and supercritical fluid chromatography

Enantioselective separations have been one of the most successful applications of supercritical fluid chromatography (SFC). Although analytical scale separations have dominated the literature, the use of SFC for preparative chiral separations is growing. Both analytical and preparative scale SFC separations seek to take advantage of the high efficiency, high throughput, and rapid method development associated with the technique. This review will cover recent developments in the application of SFC to enantioseparations.Contribution of the National Institute of Standards and Technology. Not subject to copyright.     

Enantioseparation of paroxetine intermediate on an amylose-derived chiral stationary phase by supercritical fluid chromatography

The enantioseparation of trans-3-ethoxycarbonyl-4-(4′-fluorophenyl)-1-methyl piperidine-2,6-dione (3), which is one of the important racemic precursors of trans-(−)-paroxetine, has been investigated using supercritical fluid chromatography on a Daicel Chiralpak AD column. Supercritical CO₂ modified with methanol, ethanol and 2-propanol were used as mobile phase. The influence of type and concentration of alcohol modifier on retention factor, enantioselectivity and resolution were studied. Among methanol, ethanol and 2-propanol, 2-propanol was proved to be the most favorable modifier, and 9.5% (v/v) of 2-propanol was the preferred concentration at which racemate 3 could be separated with resolution of 15.86 and retention factor of 6.323. The effects of pressure and temperature were investigated at 9.5% (v/v) of 2-propanol in the pressure range of 12–24 MPa and temperature range of 303.15–318.15 K. It was found that the lower pressure and temperature were favorable to the enantioseparation. Using van’t Hoff plot, the isoenantioselective temperature was calculated to be 410 K. The enantioseparation process was “enthalpically driven” under experimental conditions. Finally, the retention factors were satisfactorily correlated by a simplified lattice–fluid model with average absolute relative deviation (AARD%) of both enantiomers smaller than 1.76%.     

Enantiomeric separation of several antimycotic azole drugs using supercritical fluid chromatography

The chiral resolution of four antifungal compounds, three imidazoles (miconazole, econazole and sulconazole) and one triazole (itraconazole) using supercritical fluid chromatography on the amylose-based chiral stationary phase Chiralpak AD, is presented in this work. The influence of pressure, type and percentage of organic modifier and temperature on retention times and resolution was studied. The enantiomeric separation of the three imidazoles was achieved with resolutions higher than two and analysis times lower than 10 min, obtaining the best results using methanol as modifier. However, the analysis time of the triazole was higher than 80 min due to the existence of a high number of functional groups that were able to interact with the chiral stationary phase. In this case, the resolution of the four stereoisomers was achieved only partially with mixtures of ethanol and 2-propanol as modifier. The isoenantioselective temperatures were obtained from the study of the influence of the temperature, they were above the range of temperatures assayed, except for sulconazole using 2-propanol.     

On-line extraction and separation by supercritical fluid chromatography with packed columns

The application of fluid extraction in combination with fluid chromatography with packed column and flame ionization detection is described. Fluid chromatographic equipment is shown. Applications of this system to drug characterization are demonstrated.     

Enhanced chromatographic resolution of amine enantiomers as carbobenzyloxy derivatives in high-performance liquid chromatography and supercritical fluid chromatography

The carbobenzyloxy (cbz) protecting group is evaluated for it's potential to enhance the resolution of chiral amine enantiomers using high-performance liquid chromatography (HPLC) and supercritical fluid chromatography (SFC). A series of cbz derivatives of commercially available racemates was prepared and analyzed by enantioselective chromatography using a variety of mobile phases and polysaccharide and Pirkle-type chiral stationary phases (CSPs). The cbz-derivatized product consistently demonstrated enhanced chiral resolution under HPLC and SFC conditions. Improved selectivity and resolution combined with an automated preparative HPLC or SFC system can lead to the rapid generation of highly purified enantiomers of desirable starting materials, intermediates or final products.     

Direct coupling of capillary supercritical fluid chromatography with supercritical fluid extraction using modified carbon dioxide

Capillary supercritical fluid chromatography has been directly coupled with supercritical fluid extraction using modified carbon dioxide. The mixed fluids were prepared with a single pump on-line mixing system. The most important step in the SFE-SFC interface was the elimination of the modifier solvent. This was achieved by use of a coupled trap, 0.1 mm i.d. and 0.53 mm i.d. capillary tubing connected in series, with the collected solutes refocused on the second (0.53 mm i.d.) trap before transfer into the separation column. This enabled complete elimination of various modifier solvents and high efficiency collection of the solutes. The effect of the modifier on trapping efficiency was investigated using methanol, ethanol, dichloromethane, hexane, and toluene at a variety of concentrations. n-Eicosane was, for example, trapped quantitatively by modified carbon dioxide containing up to 13 % (w/w) methanol. The use of the technique has been demonstrated by selective extraction of n-paraffins, fatty acid methyl esters, and alcohols from a silica matrix; the effect of different modifiers on the extraction of a mixture of pesticides from soil has also been investigated.     

Enantioseparation of racemic paroxol on an amylose‐based chiral stationary phase by supercritical fluid chromatography

The separation of racemic paroxol, a key precursor of trans‐(?)‐paroxetine, on Chiralpak AD‐H, an amylose‐based chiral stationary phase, by supercritical fluid chromatography was studied. Pulse experiments were investigated using supercritical carbon dioxide modified with methanol (MeOH), ethanol and 2‐propanol at 35°C and 15 MPa. Retention and separation factors were determined under analytical conditions for different mobile phase compositions. Among the modifiers used, MeOH was shown to be the best additive, and 5% v/v of MeOH was the preferable concentration at which selectivity of 1.14 and resolution of 3.0 was obtained. In order to evaluate the potential with respect to preparative separations, the adsorption isotherms of individual enantiomers of paroxol were estimated using the elution by characteristic point method. Isotherm parameters were determined from the overloaded elution profiles that were collected at pressure ranging from 15 to 24 MPa. The isotherms obtained were further validated by comparing experimentally recorded elution profiles with the predictions based on the equilibrium‐dispersive model. The results are important to the process design and optimization of preparative supercritical fluid chromatography application.     

超临界流体色谱与高效液相色谱分离手性化合物的比较

超临界流体色谱(SFC)分离具有速度快、分离效率高、溶剂消耗少等优点,近年来在手性化合物的分离分析中得到诸多应用。本文对比研究了涂覆型多糖手性色谱柱在SFC和高效液相色谱(HPLC)上拆分24种手性化合物的差异。通过比较这些化合物在色谱柱上的保留时间和选择因子等发现多数化合物在SFC上的分离效率要高于其在HPLC上的分离效率,但HPLC对轴手性化合物的分离效率要优于SFC。SFC和HPLC的分离表现出一定的互补性,随着苯环侧链烷基的碳数增加,化合物在SFC上的保留逐渐增强,而在HPLC的保留却逐渐减弱。叶菌唑在使用SFC和HPLC分析时出现了洗脱顺序反转的现象。这些结果为SFC手性拆分提供了参考。     

Enantioselective separation of biologically active basic compounds in ultra-performance supercritical fluid chromatography

The enantioseparation of basic compounds represent a challenging task in modern SFC. Therefore this work is focused on development and optimization of fast SFC methods suitable for enantioseparation of 27 biologically active basic compounds of various structures. The influences of the co-solvent type as well as different mobile phase additives on retention, enantioselectivity and enantioresolution were investigated. Obtained results confirmed that the mobile phase additives, especially bases (or the mixture of base and acid), improve peak shape and enhance enantioresolution. The best results were achieved with isopropylamine or the mixture of isopropylamine and trifluoroacetic acid as additives. In addition, the effect of temperature and back pressure were evaluated to optimize the enantioseparation process. The immobilized amylose-based chiral stationary phase, i.e. tris(3,5-dimethylphenylcarbamate) derivative of amylose proved to be useful tool for the enantioseparation of a broad spectrum of chiral bases. The chromatographic conditions that yielded baseline enantioseparations of all tested compounds were discovered. The presented work can serve as a guide for simplifying the method development for enantioseparation of basic racemates in SFC.     

Extending the scope of enantiomer separation by capillary supercritical fluid chromatography on immobilized polysiloxane-anchored permethyl-β-cyclodextrin (Chirasil-Dex)

Immobilized polysiloxane-anchored permethyl-β-cyclodextrin (Chirasil-Dex) with a cyclodextrin content of approximately 30 % by weight, previously employed as a versatile chiral stationary phase for the separation of enantiomers by GC, has been used for the separation of enantiomers by capillary supercritical fluid chromatography (SFC). A considerable number of racemates could be resolved, e.g. aromatic alcohols, amino alcohols (TFA derivatives), and underivatized acids. Many pharmaceutical compounds were among those analyzed, including several NSAIDs (e.g. ibuprofen and ketoprofen), a steroidal drug (nor-gestrel), a barbiturate (hexobarbital), and others. Among the racemates resolved were many which cannot be analyzed by GC owing to low volatility or decomposition at elevated temperatures. For two racemates, analysis temperature and mobile phase density were systematically varied to give constant analysis times or capacity factors k. Low temperatures (ca 60 °C) yielded the best separation in term of separation factor, α, or resolution, R_s, even though higher densities had to be used. In comparison with GC, capillary SFC was able to furnish higher separation factors and similar resolution. The applicability of capillary SFC for the analysis of mixtures of cyclodextrin derivatives, e.g. those used in the synthesis of Chirasil-Dex, was, furthermore, demonstrated.     

Analysis of pyrethrins using capillary supercritical fluid chromatography and capillary gas chromatography with fourier transform infrared detection

The six insecticidally active components in a commercial preparation of pyrethrin extract are separated by capillary gas chromatography (GC) and by capillary supercritical fluid chromatography (SFC). Thermal degradation of pyrethrin I and II are observed under the GC conditions required to separate the pyrethrin components. The use of shorter columns and thinner stationary phase coatings reduce the amount of degradation but cannot eliminate degradation of pyrethrin II. The SFC chromatograms, obtained under thermally mild conditions, show that all components including pyrethrin II elute without degradation. Infrared spectra of cinerin I & II, jasmolin I & II, and pyrethrin I & II are obtained using a flow through SFC/IR detection cell. Spectra clearly reveal the structural differences needed to distinguish and identify the components in the extract.     

Separation of oligo- and polysaccharides by capillary supercritical fluid chromatography

Direct analysis of polar solutes by supercritical fluid chromatography (SFC) has been somewhat limited because the mobile phases in common use are all relatively nonpolar. Derivatization is demonstrated as a viable means for facilitating the SFC separation of sugars. Oligo- and polysaccharides containing up to 18 glucose units are completely resolved by capillary SFC.     

Method development and validation for the separation and determination of omeprazole enantiomers in pharmaceutical preparations by capillary electrophoresis

A new capillary zone electrophoresis (CZE) method for the separation of omeprazole enantiomers has been developed. Methyl-β-cyclodextrin (methyl-β-CD) was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated in order to optimize separation and run times. Analysis times, shorter than 8 min were found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM β-cyclodextrin and 5 mM sodium disulphide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/l for the omeprazole enantiomers. The proposed method was applied to five pharmaceutical preparations with recoveries between 84 and 104% of the labeled contents.     

Chiral separations of piperidine-2,6-dione analogues on Chiralpak IA and Chiralpak IB columns by using HPLC

Recently, two new immobilized polysaccharides based CSPs, namely tris-(3,5-dimethylphenylcarbamate) derivatives of amylose and cellulose known as Chiralpak IA and Chiralpak IB were introduced, which may be used with a wide range of solvents including standard and prohibited ones. Several racemic piperidine-2,6-dione analogues [aminoglutethimide, p-nitro-glutethimide, p-nitro-5-aminoglutethimide, cyclohexylaminoglutethimide, phenglutarimide and thalidomide] have been resolved on Chiralpak IA and Chiralpak IB columns (25 cm × 0.46 cm). The non-conventional mobile phases used were methyl-tert-butyl ether-THF (90:10, v/v) [I], 100% dichloromethane [II] and 100% acetonitrile [III] separately at a flow rate of 1.0 mL/min using a UV detector at 254 nm. The resolution factors for Chiralpak IA and Chiralpak IB columns were 1.00-5.33 and 0.33-0.67, respectively. Chiralpak IA column gave better results than Chiralpak IB column for the reported molecules using the developed HPLC conditions. Experimental conditions and the possible chiral recognition mechanisms have been discussed.     

Capillary supercritical fluid chromatography with ultraviolet multichannel detection of some pesticides and herbicides

The useful combination of capillary supercritical fluid chromatography with ultraviolet multichannel detection is demonstrated by the analysis of selected pesticides and herbicides. In this application the advantages of compound identification by ultraviolet spectrometry are appended to the separating capability of capillary supercritical fluid chromatography. A pseudo oncolumn detection approach is used. Compromises from the theoretically ideal conditions for both capillary SFC and the multichannel UV detector are made to achieve a practical interfacing of the chromatographic and spectrophotometric techniques. Detection limits are at the low nanogram levels.