Kinetics of rhodium extraction from nitric acid solutions with a mixture of dihexyl sulfide and alkylanilinium nitrate

The manifold enhancement of the rhodium extraction efficiency from nitric acid solutions of triaquatrinitrorhodium is discovered with the use of two-component mixed extractants based on alkylaniline (AA), dihexyl sulfide (DHS), dihexyl sulfoxide (DHSO), tributyl phosphate (TBP), and oxime ACORGA P5100. A mixture of unimolar solutions of alkylanilinium nitrate and DHS is found to be the most efficient extractant: at 35°C, this mixture quantitatively extracts rhodium within 5 min from aqueous solutions containing 0.06 to 3 mol/L HNO₃. The extraction kinetics are studied. The following two-stage extraction mechanism is substantiated: the equilibrium of formation of a colloidal-chemical intermediate involving [Rh(H₂O)₃(NO₂)₃], HNO₃, and (BHNO₃)_p (an associated form of the alkylanilinium salt) and the reaction of the intermediate with DHS (the rate-controlling stage).     

Rhodium and palladium joint extraction by dihexyl sulfide and alkylanilinium nitrate mixtures from nitrate solutions

We studied nonequilibrium distribution of inert rhodium(III) in extraction by dihexyl sulfide (DHS)and alkylanilinium nitrate mixtures from joint nitrate solutions of triaquatrinitrorhodium (0.1–4 g/L Rh) and palladium (0–2 g/L Pd). We discovered the effect of increasing rhodium recovery in the presence of palladium. This effect has a kinetic nature and arises from the fact that bis(alkyl sulfide) palladium(II) species catalyze the reaction between dihexyl sulfide and a rhodium intermediate based on alkylanilinium nitrate micelles. Depending on initial rhodium and palladium concentrations, the extraction system provides effective distribution factors for rhodium in the range D _Rh* = 8−300 and rhodium recoveries of 43–97% with ∼100% palladium recovery; single 5-min phase contact at 35°C ensures the 10-fold concentration of both metals in the extract. Our results are useful for developing processes for recovering fission rhodium from spent nuclear fuel. Original Russian Text ? V.V. Tatarchuk, I.A. Druzhinina, T.M. Korda, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 8, pp. 1401–1407.     

Cerium(III) extraction with oleic acid from nitrate solutions

Cerium(III) extraction with oleic acid in o-xylene from nitrate solutions was studied. The extraction mechanism and the dependence of the distribution ratio on pH and composition of the organic and aqueous phases were examined. The thermodynamic characteristics of extraction were calculated.     

Liquid-liquid extraction of rhodium(III) from hydrochloric acid solutions with 1,2,4-triazole derivative

Liquid-liquid extraction of rhodium(III) from hydrochloric acid solutions with a 1,2,4-triazole derivative was studied. Optimal conditions for its recovery were found. Rhodium(III) was shown to be recovered in extraction system by ion-exchange reaction at the time of phase contact not longer than 5 min. When phase contact time increased, rhodium(III) is extracted by a mixed mechanism with simultaneous insertion of two extractant molecules into the inner coordination sphere of rhodium(III) ion. Composition of coordination species of recovered compounds was established by electronic, IR, ¹H and ¹³C NMR spectroscopy and functional analysis, the structure of the coordination species is proposed.     

Study of extraction systems based on the mixtures of phosphorylated calix[4,6]arenes with dioctyl sulfide for recovery of triaquatrinitrorhodium species from acid nitrate-nitrite solutions

A comparison was made for extraction systems based on the mixtures of calix[n]arenes phosphorylated at the upper and lower rims (PCA, n = 4 and 6) with dioctyl sulfide (DOS) for recovery of rhodium in the form of [Rh(H₂O)₃(NO₂)₃]⁰ from acid nitrate-nitrite media. Because of inertness of rhodium compounds, the main attention was devoted to extraction kinetics. The kinetic efficiency of DOS + PCA systems was found to be much higher than that for DOS alone, whereas the components of the mixtures do not extract rhodium. Alkyl(ethyl)calixphosphine oxides are the most promising, they behave as accelerating additives in extractant mixtures. Extraction kinetics of [Rh(H₂O)₃(NO₂)₃]⁰ species was studied and extraction systems were selected to develop method for the recovery of fission rhodium.     

Extraction of rhodium(III) with sulfoxides from hydrochloric acid solutions

Extraction of rhodium(III) from hydrochloric acid solutions with dihexyl sulfoxide (DHSO) and with petroleum sulfoxides (PSOs) was studied, and the optimal conditions for its recovery were found. At a phase contact time of up to 0.5 h, the extraction of rhodium(III) with sulfoxides occurred mainly by an ionassociation scenario. If the phase contact time exceeds 0.5 h, a mixed extraction scenario predominated to form the extracted complexes (L · H⁺) · [RhCl₄L₂]-(DHSO)_o and PSO (LH⁺) · [RhCl₄(H₂O) · L]⁻. The protonation of the extraction agents occurred at the donor oxygen atoms of the sulfoxide group. When rhodium was extracted with PSOs, the coordination of the extractant molecule in the inner coordination sphere of the acido complex to the metal ion occurred through the donor sulfur atom of the sulfoxide group, while with the use of DHSO, through the donor atoms of sulfur and oxygen of the sulfoxide group. Electronic, ¹H NMR, and IR spectroscopy and elemental analysis were used to determine the composition of the extracted compounds and suggest their structure.     

Extraction kinetics of iron(III) from aqueous nitrate solutions to toluene solutions of tri-n-butylacetohydroxamic acid

The forward and reverse extraction rate of Fe³⁺ at time zero between aqueous nitrate solutions and toluene solutions of tri-n-butylacetohydroxamic acid, HX, has been studied as function of the composition of the system and the stirring speed of the two phases. Experimental information has been also obtained on the degree of aggregation of HX, its surface active properties, its solubility in the aqueous phase as well as on the equilibrium distribution of Fe(III). Rate equations have been derived. The rate determining step of the extraction reaction has been shown to be the reaction of the free and hydrolyzed iron ions, Fe³⁺ (hydrated) and FeOH⁺ (hydrated), with the HX undissociated molecules. The reactions occur simultaneously in the aqueous phase (homogeneous path) and at the interface (heterogeneous path). A correlation between the rate constants and the equilibrium constant of the extraction reaction of Fe(III) has been established.     

Extraction of rhodium(III) with petroleum sulfoxides from hydrochloric acid solutions

Extraction of rhodium(III) from hydrochloric acid solutions with petroleum sulfoxides was studied. The optimal conditions of its recovery were found. The composition and structure of the compound being extracted was determined by electronic absorption, ¹H NMR, and IR spectroscopies and elemental analysis.     

Extraction of Ce(III) with naphthenic acid from nitrate solutions

Extraction of Ce(III) with naphthenic acid from nitrate solutions was studied. The composition of solvation complexes, extraction constants, and Gibbs energies of extraction were found from the dependences of the distribution coefficients on pH and compositions of the aqueous and organic phases.     

State of rhodium(III) in sulfuric acid solutions

The formation of rhodium(III) sulfate complexes under moderately rigorous temperature conditions was studied by ¹⁰³Rh and ¹⁷O NMR spectroscopy. The complexes [Rh₂(μ-SO₄)₂(H₂O)₈]²⁺, [Rh₂(^*μ-SO₄)(H₂O)₈]⁴⁺, and [Rh₃(μ-SO₄)₃(μ-OH)(H₂O)₁₀]²⁺ were found to be the most stable species in aged solutions.     

Extraction of rhodium(III) by a bisacylated diethylenetriamine derivative from hydrochloric acid solutions

The extraction of rhodium(III) with a bisacylated diethylenetriamine derivative from hydrochloric acid solutions was studied. Optimum conditions for rhodium(III) extraction were determined. It was found that, at a contact time to 10 min, the extraction occurred by an ion-association mechanism. At a contact time longer than 10 min, rhodium(III) was extracted by a mixed mechanism with the insertion of an extractant molecule into the inner coordination sphere of the rhodium(III) ion. The composition of the extracted compound was determined using electronic, ¹H and ¹³C NMR, and IR spectroscopy and elemental analysis, and the structure of this compound was proposed.     

The interpretation of X-ray diffraction by aqueous solutions of aluminum(III) nitrate and chromium(III) nitrate

Aqueous solutions of the nitrates of aluminum (0.5 M) and chromium (0.5 M) are investigated with X-ray diffraction at t = 25° C. The experimental intensity is interpreted in terms of an electron product-function which is a sum of various pair contributions. The contribution containing the information about cationic hydration has been evaluated by combining the results of separate experiments. The method is in several aspects quite different from what is usual. Still the results obtained are in general agreement with the data reported elsewhere. That is, sixfold coordination at 1.90 Å and 1.98 Å and a second shell containing about 12 water molecules appearing at 4.10–4.15 Å and 4.20–4.25 Å for Al³⁺ and Cr³⁺ respectively.     

Separation of rhodium from iridium with sodium borohydride and standardization of rhodium(III) solutions

Of the platinum group metal separations, that of rhodium from iridium is the most difficult. The existing gravimetric methods are too lengthy or make use of organic reagents which ultimately need to be removed before iridium can be determined. The proposed method of separation is rapid, needs no pH control, and easy to carry out. Rh(III) ions are quantitatively reduced to Rh(0) by the action of aqueous sodium borohydride. The separation is best achieved in perchlorate medium in the presence of hydroxylamine. The separation is dependent on the concentration ratio of iridium to rhodium; if this is high, some iridium is co-precipitated; if low, the rhodium obtained is free from even spectrographic traces of iridium. A new method for standardization of Rh(III) solutions with sodium borohydride is proposed.     

Synergistic extraction of Eu(III) and Nd(III) from aqueous medium using a mixture of sulfasalazine and 1,10-phenanthroline

Journal of Radioanalytical and Nuclear Chemistry - Solvent extraction of Eu(III) and Nd(III) from aqueous medium was investigated by sulfasalazine in benzoyl alcohol as single extractant and then...